Processing polyamides with superheated water

Superheated water (shH₂O) is investigated as a process aid in conventional aliphatic polyamide (PA) systems. The polymers investigated include PA 6 (PA6), PA 6,6 (PA66), PA 6,12 (PA612), and PA 12 (PA12). It is shown that the PA melting and crystallization temperatures are significantly reduced when exposed to shH₂O. For example, the melting temperature of PA6 is depressed from 206 to 153 °C in the presence of shH₂O. A relationship between amide group density and thermal transition temperature reduction is observed. Processing these materials in shH₂O has led to a variety of materials ranging from low‐density foams to higher density locally anisotropic foamed morphologies. In situ observations of PAs melting in the presence of shH₂O are performed using a specially designed reactor. Results from these experiments are used to estimate the diffusion coefficient of shH₂O in PA6. Finally, low‐temperature extrusion is performed with PA6 and shH₂O at temperatures as low as 180 °C and mixture viscosity is estimated. A 20‐fold depression in the melt viscosity of PA6 is observed at 240 °C with shH₂O. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 803–813     

Polyamide‐6,6‐based blocky copolyamides obtained by solid‐state modification

Copolyamides based on polyamide‐6,6 (PA‐6,6) were prepared by solid‐state modification (SSM). Para‐ and meta‐xylylenediamine were successfully incorporated into the aliphatic PA‐6,6 backbone at 200 and 230 °C under an inert gas flow. In the initial stage of the SSM below the melting temperature of PA‐6,6, a decrease of the molecular weight was observed due to chain scission, followed by a built up of the molecular weight and incorporation of the comonomer by postcondensation during the next stage. When the solid‐state copolymerization was continued for a sufficiently long time, the starting PA‐6,6 molecular weight was regained. The incorporation of the comonomer into the PA‐6,6 main chain was confirmed by size exclusion chromatography (SEC) with ultraviolet detection, which showed the presence of aromatic moieties in the final high‐molecular weight SSM product. The occurrence of the transamidation reaction was also proven by ¹H nuclear magnetic resonance (NMR) spectroscopy. As the transamidation was limited to the amorphous phase, this SSM resulted in a nonrandom overall structure of the PA copolymer as shown by the degree of randomness determined using ¹³C NMR spectroscopy. The thermal properties of the SSM products were compared with melt‐synthesized copolyamides of similar chemical composition. The higher melting and higher crystallization temperatures of the solid state‐modified copolyamides confirmed their nonrandom, block‐like chemical microstructure, whereas the melt‐synthesized copolyamides were random. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5118–5129     

Preparation and properties of ionic‐liquid‐containing poly(ethylene glycol)‐based networked polymer films having lithium salt structures

Ionic‐liquid‐containing polymer films were prepared by swelling poly(ethylene glycol)‐based networked polymers having lithium salt structures with an ionic liquid, 1‐ethyl‐3‐methylimidazolium bis(fluorosulfonyl)imide (EMImFSI), or with an EMImFSI solution of lithium bis(trifluoromethanesulfonyl) imide (LiTFSI). Their fundamental physical properties were investigated. The networked polymer films having lithium salt structures were prepared by curing a mixture of poly(ethylene glycol) diglycidyl ether and lithium 3‐glycidyloxypropanesulfonate or lithium 3‐(glycidyloxypropanesulfonyl)(trifluoromethanesulfonyl)imide with poly(ethylene glycol) bis(3‐aminopropyl) terminated. The obtained ionic‐liquid‐containing films were flexible and self‐standing. They showed high ionic conductivity at room temperature, 1.16–2.09 S/m for samples without LiTFSI and 0.29–0.43 S/m for those with 10 wt % LiTFSI. Their thermal decomposition temperature was above 220 °C, and melting temperature of the ionic liquid incorporated in the film was around ?16 °C. They exhibited high safety due to good nonflammability of the ionic liquid. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Effect of N‐methyl amide linkage on hydrogen bonding behavior and water transport properties of partially N‐methylated random aromatic copolyamides

The synthesis, conformational preferences, hydrogen bonding behaviors, and membrane properties of new partially N‐methylated random aromatic copolyamides were reported. These copolyamides were prepared by the low temperature polycondensations of isophthaloyl chloride with 3,5‐diaminobenzoic acid, N,N'‐dimethyl‐4,4'‐diaminodiphenyl ether (MDAE), and 4,4'‐diaminodiphenyl ether. The incorporation of the N‐methyl amide linkages into the polymer backbone decreased the contents of the cis conformation in the N‐methyl amide linkages and suppressed the hydrogen bondings among the amide linkages. Furthermore, the surface hydrophilicity of the copolyamides evaluated by water contact angle measurements decreased with increasing the MDAE unit in the polymer backbone. These experimental results indicated that the suppression of the hydrogen bonding and the existence of the tertiary amide linkage in the cis conformation induced the loose packing of the polymer chains. As a result, the incorporation of the N‐methyl amide linkage increased water flux and decreased salt rejection. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3453–3462     

Soluble,redox‐active,and blue‐emitting poly(amide‐hydrazide)s and poly(amide‐1,3,4‐oxadiazole)s containing pyrenylamine units

Two new aromatic poly(amide‐hydrazide)s (PAHs)‐bearing electroactive pyrenylamine units in the backbone were prepared from the phosphorylation polycondensation reactions of N,N‐di(4‐carboxyphenyl)‐1‐aminopyrene ( 1 ) with p‐aminobenzoyl hydrazide (p‐ABH) and m‐aminobenzoyl hydrazide (m‐ABH), respectively. The PAHs could be further cyclodehydrated into the corresponding poly(amide‐1,3,4‐oxadiazole)s in the range of 300–400 °C in the solid film state. All the hydrazide and oxadiazole polymers were soluble in many polar organic solvents and could afford flexible and strong films via solution casting. The poly(amide‐1,3,4‐oxdiazole)s had high glass‐transition temperatures (294–309 °C) and high thermal stability (10% weight‐loss temperature in excess of 520 °C). The dilute solutions of all the hydrazide and oxadiazole polymers showed strong fluorescence with emission maxima around 457–459 nm in the blue region. Copolymers obtained from the polycondensation of equimolar mixture of diacid 1 and 4,4′‐oxydibenzoic acid with p‐ABH or m‐ABH exhibited a significantly increased fluorescence quantum efficiency in comparison with the homopolymers. Cyclic voltammetry results indicated that all the hydrazide and oxadiazole polymers exhibited an ambipolar (n‐ and p‐doping processes) and electrochromic behavior. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Formation of higher cyclic oligomers in polyamide‐4,6

An example of morphology‐steered chemistry of cyclic oligomers with the example of polyamide‐4,6 (PA46) is discussed in this article. The cyclic oligoamide profiles of solid‐state post condensed PA46 show an unusual maximum for intermediate cycles consisting of 10 and 12 amide groups, which are formed in the initial stage of solid state post condensation. This is explained from the short chain length at the start of the post condensation, the preorganization of linear oligomers in the lamellar crystal structure, and the occurrence of amide units in the PA46 lamellar folds. Further the development of the cyclic oligomers up to the cyclic hexadecamide is followed on heating the base polymer in the melt at 310 °C, where it showed to react back to the theoretical Jacobsen and Stockmayer distribution. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Dual crosslinked phenylethynyl end‐capped sulfonated polyimides via the ethynyl and sulfonate groups promoted by PEG

Typically, phenylethynyl (PE) end‐capped oligomides require a temperature of 370 °C for 1 h to develop a crosslinked system. A published method using poly(ethylene glycol)s (DM‐PEG‐250 and PEG‐400) as cosolvents with NMP was effective in crosslinking the ethynyl end‐caps at 250 °C/3 h in nonsulfonated oligomides. The application of this novel crosslinked method to PE end‐capped sulfonated oligomides was effective but caused a secondary crosslinked network via the sulfonic acid groups and ethylene glycol solvents. The solid‐state ¹³C NMR spectral data on ¹³C‐labeled end‐caps in the PE‐3F‐SPI‐3 oligomide provide evidence for the ethynyl to ethynyl and ethylene oxide sulfonate ester dual crosslinked structure. Infrared spectroscopy of model compounds also provides evidence for the presence of crosslinked sulfonate ester and appended sulfonate ester side chains. ¹³C NMR also provided quantitative data on the extent of the ethynyl to ethynyl crosslinking reaction and sulfonate ester crosslinks and side chains. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Poly(ethylene terephthalate) reinforced by N,N′‐diphenyl biphenyl‐3,3′,4,4′‐tetracarboxydiimide moieties

Starting with 3,3′,4,4′‐biphenyltetracarboxylic dianhydride and methyl aminobenzoate, we synthesized a novel rodlike imide‐containing monomer, N,N′‐bis[p‐(methoxy carbonyl) phenyl]‐biphenyl‐3,3′,4,4′‐tetracarboxydiimide (BMBI). The polycondensation of BMBI with dimethyl terephthalate and ethylene glycol yielded a series of copoly(ester imide)s based on the BMBI‐modified poly(ethylene terephthalate) (PET) backbone. Compared with PET, these BMBI‐modified polyesters had higher glass‐transition temperatures and higher stiffness and strength. In particular, the poly(ethylene terephthalate imide) PETI‐5, which contained 5 mol % of the imide moieties, had a glass‐transition temperature of 89.9 °C (11 °C higher than the glass‐transition temperature of PET), a tensile modulus of 869.4 MPa (20.2 % higher than that of PET), and a tensile strength of 80.8 MPa (38.8 % higher than that of PET). Therefore, a significant reinforcing effect was observed in these imide‐modified polyesters, and a new approach to higher property polyesters was suggested. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 852–863, 2002; DOI 10.1002/pola.10169     

Polymerization of 2,5‐diaminoterephthalic acid‐type monomers for the synthesis of polyamides containing ladder unit

To synthesize ladder‐type polyamides by construction of two amide bonds successively, 2,5‐diaminoterephthalic acid derivatives bearing anthranilic acid ester and isatoic anhydride moieties were synthesized and their polymerization was investigated. Polymerization of the methyl ester monomer proceeded in the presence of lithium hexamethyldisilazide (LiHMDS) as a base in tetrahydrofuran (THF). However, mass spectroscopic analysis of the product suggested that not only the bis(trimethylsilyl)amide anion of LiHMDS but also the methoxide anion eliminated at the second amide‐linkage formation reaction decomposed the isatoic anhydride unit of the growing oligomer by nucleophilic attack to disturb the polymerization. To reduce the nucleophilicity of the eliminated anion, methyl ester of the monomer was changed to phenyl ester and its polymerization was studied. The reaction conditions were optimized, and the best result was obtained when the polymerization was conducted in the presence of 1.0 equivalent of LiHMDS without additives in THF at 50 °C. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2365–2372     

Solution processable polyamides containing thiazole units and thioether linkages with high optical transparency,high refractive index,and low birefringence

A series of new organic‐soluble polyamides (PAs) bearing flexible thioether linkages and heteroaromatic thiazole units were synthesized from a novel thioether‐bridged diamine monomer (DA) and various commercially available aromatic dicarboxylic acids (1–5) via a direct polycondensation method. The resulting polymers were obtained in high yields and possessed inherent viscosities in the range of 0.41–0.80 dL g^?1. All of the polymers were amorphous in nature, exhibited good solubility and could be easily dissolved in amide‐type polar aprotic solvents and even dissolved in less polar solvents (e.g., tetrahydrofuran, pyridine, and acetone). They showed excellent thermal stability with glass transition temperatures between 207 and 239 °C and 10% weight loss temperatures in excess of 424 °C in nitrogen and 469 °C in air atmosphere. The optical transmittances of the PA films at 450 nm were higher than 85% for the thickness of ～10 μm. The combination of the thiazole moieties and flexible thioether linkages provided PAs with high average refractive indices (n_av) of 1.7414–1.7542 and low birefringences (Δn) of 0.0061–0.0087 at 632.8 nm. In particular, the n_av of PA‐5 derived from DA and 2,2′‐dithiodibenzoic acid exhibited the highest refractive index (1.7542) in the high refractive index PAs. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3505–3515     

Solution,thermal and optical properties of new poly(pyridinium salt)s derived from conjugated quinoline diamines

Several new poly(pyridinium salt)s with quinoline diamine moieties in their backbones with tosylate and triflimide counterion were prepared by either a ring‐transmutation polymerization reaction with bis(pyrylium tosylate) with a series of isomeric quinoline diamines in dimethyl sulfoxide (DMSO) for 48 h at 130–140 °C or a metathesis reaction of the tosylate polymers with lithium triflimide in DMSO at about 60 °C. Their chemical structures were confirmed by FTIR, ¹H and ¹³C NMR spectroscopy, and elemental analysis. Their number‐average molecular weights (M_n) were in the range of 18,000–58,000, and their polydispersities were in the range of 1.12–1.53 as determined by gel permeation chromatography. They had thermal stability in the temperature range of 353–455 °C and glass‐transition temperatures >240 °C. They had good solubility in common organic solvents and were characterized with polarizing optical microscopy (POM) studies for their lyotropic liquid‐crystalline properties. Their light‐emission properties were examined by spectrofluorometry in both the solution and film states. Their quantum yields were also determined. Additionally, their morphologies in the thin‐film states and melt‐drawn fibers were examined with POM, scanning electron microscopy, and transmission electron microscopy techniques. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Effect of benzenesulfonamide plasticizers on the glass‐transition temperature of semicrystalline polydodecamide

The effect of various benzenesulfonamide (BSA) plasticizers on the amorphous phase of semicrystalline polydodecamide (PA‐12) has been investigated. MonoBSAs appear as efficient glass‐transition temperature (T_g) depressors because of their miscibility with the host polyamide (PA), low glass transition, and small molecule size. PA‐12's T_g shifts from 50 to about 0 °C at 20 mol % of the most efficient molecules. Comparatively, the more bulky bisBSAs appear to induce less important absolute T_g decreases (30 K at 20 mol %), although these appear as more important when considering the polymer T_g to plasticizer T_g difference. This unexpected observation could be ascribed to both the amide‐sulfonamide interactions and the sterically generated disorder within the polyamide because of the plasticizer molecule's size. Phase‐separation behavior of BSA plasticizers within the host PA has also been investigated. Crystalline phenyl‐SO₂NH₂, for instance, dephased beyond 20 mol % in PA‐12, forming distinct 1–2 micrometer wide crystalline domains as a result of its high propensity to crystallize upon cooling from the melt. By contrast, slow crystallizing N,N‐dimethylBSA, which lacks any specific interaction for PA‐12, remained nevertheless dispersed at a molecular level (metastable state, no phase separation) when vitrification of the host PA‐12 amorphous phase occurred on cooling. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2208–2218, 2002     

Synthesis and crystal structures of the potential tyrosinase inhibitors N‐(4‐acetylphenyl)‐2‐chloroacetamide and 2‐(4‐acetylanilino)‐2‐oxoethyl cinnamate

Substituted benzoic acid and cinnamic acid esters are of interest as tyrosinase inhibitors and the development of such inhibitors may help in diminishing many dermatological disorders. The tyrosinase enzyme has also been linked to Parkinson's disease. In view of hydroxylated compounds having ester and amide functionalities to potentially inhibit tyrosinase, we herein report the synthesis and crystal structures of two amide‐based derivatives, namely N‐(4‐acetylphenyl)‐2‐chloroacetamide, C₁₀H₁₀ClNO₂, (I), and 2‐(4‐acetylanilino)‐2‐oxoethyl cinnamate, C₁₉H₁₇NO₄, (II). In compound (I), the acetylphenyl ring and the N—(C=O)—C unit of the acetamide group are almost coplanar, with a dihedral angle of 7.39 (18)°. Instead of esterification, a cheaper and more efficient synthetic method has been developed for the preparation of compound (II). The molecular geometry of compound (II) is a V‐shape. The acetamide and cinnamate groups are almost planar, with mean deviations of 0.088 and 0.046 Å, respectively; the dihedral angle between these groups is 77.39 (7)°. The carbonyl O atoms are positioned syn and anti to the amide carbonyl O atom. In the crystals of (I) and (II), N—H…O, C—H…O and C—H…π interactions link the molecules into a three‐dimensional network.     

Intra‐ and intermolecular Se...X (X = Se,O) interactions in selenium‐containing heterocycles: 3‐benzoylimino‐5‐(morpholin‐4‐yl)‐1,2,4‐diselenazole

In the selenium‐containing heterocyclic title compound {systematic name: N‐[5‐(morpholin‐4‐yl)‐3H‐1,2,4‐diselenazol‐3‐ylidene]benzamide}, C₁₃H₁₃N₃O₂Se₂, the five‐membered 1,2,4‐diselenazole ring and the amide group form a planar unit, but the phenyl ring plane is twisted by 22.12 (19)° relative to this plane. The five consecutive N—C bond lengths are all of similar lengths [1.316 (6)–1.358 (6) Å], indicating substantial delocalization along these bonds. The Se...O distance of 2.302 (3) Å, combined with a longer than usual amide C=O bond of 2.252 (5) Å, suggest a significant interaction between the amide O atom and its adjacent Se atom. An analysis of related structures containing an Se—Se...X unit (X = Se, S, O) shows a strong correlation between the Se—Se bond length and the strength of the Se...X interaction. When X = O, the strength of the Se...O interaction also correlates with the carbonyl C=O bond length. Weak intermolecular Se...Se, Se...O, C—H...O, C—H...π and π–π interactions each serve to link the molecules into ribbons or chains, with the C—H...O motif being a double helix, while the combination of all interactions generates the overall three‐dimensional supramolecular framework.     

Reaction of p‐toluenesulfonyl isocyanate with polymers having amide moieties and hydrolysis of the obtained polymers

The chemical modification of polymers having amide moieties was carried out with p‐toluenesulfonyl isocyanate. The resulting polymers revealed high hydrolytic character. For example, poly(acrylamide) was refluxed with an excess amount of p‐toluenesulfonyl isocyanate in THF for 50 h to obtain a structurally modified polymer in 76% yield, whose sulfonylurea functionality was 100%. The resulting polymer was subjected to hydrolysis in a 1 M NaOH solution at 50 °C to convert 90% of the sulfonylurea in the side chain to the carboxylic acid moieties. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3440–3449, 2000     

Polyimides as cathodic materials in lithium batteries: Effect of the chemical structure of the diamine monomer

Polyimides are being investigated as alternative, environmentally friendly and safe organic electrode materials for lithium and sodium batteries. However, further improvements need the proper chemical design of these polymers. In this paper, the effect of chemical structure of polyimides on their performance as cathodic materials in lithium batteries was investigated in detail. More in particular, we studied polyimides based on seven different diamine monomers in combination with best performing naphthalenic dianhydride monomer. The first set included the so‐called cardo diamines possessing additional redox‐active carbonyl group with the goal to enhance the theoretical capacity of the polymer. Second, several aromatic diamines including additional functionalities such as cyclic amides, anthrone, or quinolidinium groups were investigated. Finally, aliphatic diamines, containing oxyethylene moieties and thus capable to increase the ionic conductivity of the resulting polymer system, were explored. Among the different polyimides, the “cardo” one based on naphthalenic dianhydride and aromatic aniline phthalein with an additional carbonyl group showed the best results in terms of battery performance. Such polyimide was capable to deliver up to 130 mAhg⁻¹ specific capacity (87% of the theoretical value) at 25 °C and at a current density of 250 mAg⁻¹ during 100 charge/discharge cycles. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 714–723     

13C-NMR sequence analysis. 11. Anionic copolymerization of lactams

Using sodium as the catalyst and benzoylchloride as cocatalyst, copolymerizations of γ-butyrolactam with ε-caprolactam and ω-capryllactam were carried out at 100°C. In a similar manner copolymerizations of ε-cparolactam, ω-capryllactam, and ε-laurinlactam were achieved at 150 and 250°C without a cocatalyst. The 90.5-MHz ¹³C-NMR spectra of all random copolyamides in fluorosulfonic acid show three or more CO signals that allow the ratio of homogeneous (A? A and B? B) to heterogeneous (A? B and B? A) amide groups to be determined. These results cleárly demonstrate that despite the reaction temperature or reactivity of the lactams the copolyamides do not contain long homogeneous blocks (A_n and B_n). The CO signals of the random copolyamides were assigned by comparison with the corresponding homopolyamides and alternating copolyamides. Solutions of the alternating copolyamide (-β-Ala-ε-Aca-)_n, in fluorosulfonic acid were measured to determine whether the ¹³C chemical shifts and line widths are dependent on concentration.     

Synthesis of polyacetals with various main‐chain structures by the self‐polyaddition of vinyl ethers with a hydroxyl function

To establish the optimum conditions for obtaining high molecular weight polyacetals by the self‐polyaddition of vinyl ethers with a hydroxyl group, we performed the polymerization of 4‐hydroxybutyl vinyl ether (CH₂?CH? O? CH₂CH₂CH₂CH₂? OH) with various acidic catalysts [p‐toluene sulfonic acid monohydrate, p‐toluene sulfonic anhydride (TSAA), pyridinium p‐toluene sulfonate, HCl, and BF₃OEt₂] in different solvents (tetrahydrofuran and toluene) at 0 °C. All the polymerizations proceeded exclusively via the polyaddition mechanism to give polyacetals of the structure [? CH(CH₃)? O? CH₂CH₂CH₂CH₂? O? ]_n quantitatively. The reaction with TSAA in tetrahydrofuran led to the highest molecular weight polymers (number‐average molecular weight = 110,000, weight‐average molecular weight/number‐average molecular weight = 1.59). 2‐Hydroxyethyl vinyl ether, diethylene glycol monovinyl ether, cyclohexane dimethanol monovinyl ether, and tricyclodecane dimethanol monovinyl ether were also employed as monomers, and polyacetals with various main‐chain structures were obtained. This structural variety of the main chain changed the glass‐transition temperature of the polyacetals from approximately ?70 °C to room temperature. These polyacetals were thermally stable but exhibited smooth degradation with a treatment of aqueous acid to give the corresponding diol compounds in quantitative yields. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4053–4064, 2002     

Hydration in a new semiaromatic polyamide observed by humidity‐controlled dynamic viscoelastometry and X‐ray diffraction

Hydration in a new semiaromatic polyamide, named polyamide 9‐T (PA9‐T), a copolymer of terephthalic acid with n‐ and iso‐nonanediamines, is studied by dynamic viscoelastic analysis under controlled humidity conditions and wide‐angle X‐ray diffraction analysis in comparison with common polyamide nylon 6. The storage modulus of PA9‐T is retained at up to 60 °C with increasing humidity, then dropped with further increases in temperature past 70 °C. The decrease in mechanical properties at 70 °C due to moisture uptake is found to be substantially improved by annealing to develop molecular packing and/or crystallization. In contrast, the storage modulus of very highly crystallized (50% crystallinity) nylon 6 decreases markedly with humidity at low temperatures such as 20 °C. Thus, PA9‐T retains its mechanical properties in humid atmospheres at much higher temperatures than nylon 6. The crystalline X‐ray diffraction peaks for nylon 6 corresponding to (002) + (202) of the α form shift upon absorption of moisture, speculated to be due to the weakening of hydrogen bonds and the subsequent conformational disordering of the chains. Unlike nylon 6, the crystalline peaks of PA9‐T do not shift due to moisture uptake. This is considered to be attributable to that the long aliphatic chain in PA9‐T forms the large hydrophobic domain, rendering PA9‐T less hygroscopic than nylon 6. Additionally, strong hydrogen bonds formed by terephthalamide residues together with a strong stacking force of phenylene groups may also repel water, preventing moisture bind with the amide groups of PA9‐T crystals. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1640–1648, 2005     

One‐pot synthesis of polyamide 12,T–polyamide‐6 block copolymers

Polyamide 12,T–polyamide‐6 (PA‐12,T–PA‐6) block copolymers were synthesized by anionic polymerization of caprolactam using a PA‐12,T macrocoinitiator (McI). PA‐12,T McI and its precursors are soluble in molten caprolactam allowing for both the McI step‐growth polymerization and anionic polymerization to be performed in one‐pot. It was found that the competing reaction rates of caprolactam ring‐opening polymerization and McI transamidation are both deterred by a common ion effect using CaCl₂ and soluble materials were obtained using >1 mol % CaCl₂. Without CaCl₂, the reaction mixture solidifies in less than 30 s and produces crosslinked materials. To understand this effect, PA‐12,T McI reactions with caprolactam were performed with 1–10 mol % CaCl₂, and polymer structures were characterized using ¹³C NMR and dilute solution viscometry. These data were then correlated with unique thermal properties and swelling behavior of the block copolymers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011