Determination of benomyl, diphenyl, o-phenylphenol, thiabendazole, chlorpyrifos, methidathion, and methyl parathion in oranges by solid-phase extraction, liquid chromatography, and gas chromatography

A simple and rapid method was developed for determination of benomyl, diphenyl (DP), o-phenylphenol (OPP), thiabendazole (TBZ), chlorpyrifos, methidathion, and methyl parathion in whole oranges. These compounds were extracted from a mixture of samples and anhydrous sodium acetate with ethyl acetate. The ethyl acetate extract was concentrated and cleaned up by passing through tandem solid-phase extraction columns consisting of anion-exchange and primary/secondary amine bonded silica. The eluate was concentrated and volume was adjusted with methanol for subsequent liquid chromatography (LC) and gas chromatography (GC). Benomyl (as methyl-2-benzimidazole carbamate, MBC), DP, OPP, and TBZ residues were determined by LC with fluorescence detection. Recoveries at 3 fortified levels (0.1, 1, and 10 micrograms/g) ranged from 63.9 to 97.4%, with coefficients of variation (CVs) of 1.6 to 15.5%. Limits of detection (LODs) were 0.01 microgram/g for DP, OPP, TBZ and 0.05 microgram/g for benomyl. Chlorpyrifos, methidathion, and methyl parathion residues were determined by GC with flame photometric detection. Recoveries ranged from 90.4 to 97.0%, with CVs of 2.1 to 5.9%. LODs were 0.005 microgram/g for chlorpyrifos and methyl parathion, and 0.01 microgram/g for methidathion.     

Synthesis, photophysical, electrochemical, and electrogenerated chemiluminescence studies. Multiple sequential electron transfers in BODIPY monomers, dimers, trimers, and polymer

Synthesis of the C(8) BODIPY monomers, dimers, and trimers, a C(8) polymer, and N(8) aza-BODIPY monomer and dimer was carried out. Methyl and mesityl C(8)-substituted monomers, dimers, and trimers were used. Dimers, trimers, and polymer were formed chemically through the β-β (2/6) positions by oxidative coupling using FeCl(3). A red shift of the absorbance and fluorescence is observed with addition of monomer units from monomer to polymer for C(8) dyes. The aza-BODIPY dye shows red-shifted absorbance and fluorescence compared with the C(8) analogue. Cyclic voltammetry shows one, two, and three one-electron waves on both reduction and oxidation for the monomer, dimer, and trimer, respectively, for the C(8) BODIPYs. The separation for the reduction peaks for the C(8) dimers is 0.12 V compared with 0.22 V for the oxidation, while the trimers show separations of 0.09 V between reduction peaks and 0.13 V for oxidation peaks. The larger separations between the second and third peaks, 0.25 V for the oxidation and 0.2 V for the reduction, are consistent with a larger energy to remove or add a third electron compared with the second one. The BODIPY polymer shows the presence of many sequential one-electron waves with a small separation. These results provide evidence for significant electronic interactions between different monomer units. The aza-BODIPY dye shows a reduction peak 0.8 V more positive compared to the C(8) compound. Aza-BODIPY dimer shows the appearance of four waves in dichloromethane. The separation between two consecutive waves is around 0.12 V for reduction compared with 0.2 V for oxidation, which is comparable with the results for the C(8) dyes. Electrogenerated chemiluminescence (ECL) of the different species was obtained, including weak ECL of the polymer.     

van der Waals corrections to density functional theory calculations: Methane,ethane, ethylene,benzene, formaldehyde,ammonia, water,PBE, and CPMD

Parameters are developed for a practical application of the empirical van der Waals (vdW) correction infrastructure available in the CPMD density functional theory (DFT) code. The binding energy, geometry, and potential energy surface (PES) are examined for methane, ethane, ethylene, formaldehyde, ammonia, three benzene dimer geometries, and three benzene–water geometries. The vdW corrected results compare favorably with MP2 and CCSD(T) calculations near the complete basis set limits, and with experimental results where they are available.     

Polarizabilities and hyperpolarizabilities for the atoms Al, Si, P, S, Cl, and Ar: Coupled cluster calculations

Accurate static dipole polarizabilities and hyperpolarizabilities are calculated for the ground states of the Al, Si, P, S, Cl, and Ar atoms. The finite-field computations use energies obtained with various ab initio methods including Moller-Plesset perturbation theory and the coupled cluster approach. Excellent agreement with experiment is found for argon. The experimental alpha for Al is likely to be in error. Only limited comparisons are possible for the other atoms because hyperpolarizabilities have not been reported previously for most of these atoms. Our recommended values of the mean dipole polarizability (in the order Al-Ar) are alpha/e(2)a(0) (2)E(h) (-1)=57.74, 37.17, 24.93, 19.37, 14.57, and 11.085 with an error estimate of +/-0.5%. The recommended values of the mean second dipole hyperpolarizability (in the order Al-Ar) are gamma/e(4)a(0) (4)E(h) (-3)=2.02 x 10(5), 4.31 x 10(4), 1.14 x 10(4), 6.51 x 10(3), 2.73 x 10(3), and 1.18 x 10(3) with an error estimate of +/-2%. Our recommended polarizability anisotropy values are Deltaalpha/e(2)a(0) (2)E(h) (-1)=-25.60, 8.41, -3.63, and 1.71 for Al, Si, S, and Cl respectively, with an error estimate of +/-1%. The recommended hyperpolarizability anisotropies are Deltagamma/e(4)a(0) (4)E(h) (-3)=-3.88 x 10(5), 4.16 x 10(4), -7.00 x 10(3), and 1.65 x 10(3) for Al, Si, S, and Cl, respectively, with an error estimate of +/-4%.     

Direct determination of four fluoroquinolones,enoxacin, norfloxacin,ofloxacin, and ciprofloxacin,in pharmaceuticals and blood serum by HPLC

A rapid, accurate and sensitive method has been developed for the quantitative determination of four fluoroquinolone antimicrobial agents, enoxacin, norfloxacin, ofloxacin and ciprofloxacin, with high in-vitro activity against a wide range of Gram-negative and Gram-positive organisms.A Kromasil 100 C(8) 250 mm x 4 mm, 5 microm analytical column was used with an eluting system consisting of a mixture of CH(3)CN-CH(3)OH-citric acid 0.4 mol L(-1) (7:15:78 %, v/v). Detection was performed with a variable wavelength UV-visible detector at 275 nm resulting in limits of detection: 0.02 ng per 20 microL injection for enoxacin and 0.01 ng for ofloxacin, norfloxacin and ciprofloxacin. Hydrochlorothiazide (HCT) was used as internal standard at a concentration of 2 ng microL(-1). A rectilinear relationship was observed up to 2 ng microL(-1) for enoxacin, 12 ng microL(-1) for ofloxacin, 3 ng microL(-1) for norfloxacin, and 5 ng microL(-1) for ciprofloxacin. Separation was achieved within 10 min. The statistical evaluation of the method was examined by performing intra-day (n=8) and inter-day precision assays (n=8) and was found to be satisfactory with high accuracy and precision. The method was applied to the direct determination of the four fluoroquinolones in human blood serum. Sample pretreatment involved only protein precipitation with acetonitrile. Recovery of analytes in spiked samples was 97+/-6% over the range 0.1-0.5 ng microL(-1).     

Microdetermination of Mn, Fe, Co, Ni, Cu, Zn, Ag, Cd, Hg, Pb, Bi and U in inorganic and organometallic compounds with morpholinium morpholine-N-dithiocarboxylate

The chelates of morpholinium morpholine-N-dithiocarboxylate with manganese(II), iron(II), iron(III), cobalt(II), nickel, copper(II), zinc, silver, cadmium, mercury(II), lead, bismuth and uranium(VI) have been prepared and their compositions elucidated. Simple, accurate and relatively rapid procedures for the gravimetric and titrimetric microdetermination of these metals in inorganic and organometallic compounds are presented.     

Protonated benzofuran,anthracene, naphthalene,benzene, ethene,and ethyne: measurements and estimates of pK(a) and pK(R)

Aqueous solvolyses of acyl derivatives of hydrates (water adducts) of anthracene and benzofuran yield carbocations which undergo competitive deprotonation to form the aromatic molecules and nucleophilic reaction with water to give the aromatic hydrates. Trapping experiments with azide ions yield rate constants k(p) for the deprotonation and k(H2O) for the nucleophilic reaction based on the "azide clock". Combining these with rate constants for (a) the H(+)-catalyzed reaction of the hydrate to form the carbocation and (b) hydrogen isotope exchange of the aromatic molecule (from the literature) yields pK(R) = -6.0 and -9.4 and pK(a) = -13.5 and -16.3 for the protonated anthracene and protonated benzofuran, respectively. These pK values may be compared with pK(R) = -6.7 for naphthalene hydrate (1-hydroxy-1,2-dihydronaphthalene), extrapolated to water from measurements by Pirinccioglu and Thibblin for acetonitrile-water mixtures, and pK(a) = -20.4 for the 2-protonated naphthalene from combining k(p) with an exchange rate constant. The differences between pK(R) and pK(a) correspond to pK(H2O), the equilibrium constant for hydration of the aromatic molecule (pK(H2O) = pK(R) - pK(a)). For naphthalene and anthracene values of pK(H2O) = +13.7 and +7.5 compare with independent estimates of +14.2 and +7.4. For benzene, pK(a) = -24.3 is derived from an exchange rate constant and an assigned value for the reverse rate constant close to the limit for solvent relaxation. Combining this pK(a) with calculated values of pK(H2O) gives pK(R) = -2.4 and -2.1 for protonated benzenes forming 1,2- and 1,4-hydrates, respectively. Coincidentally, the rate constant for protonation of benzene is similar to those for protonation of ethylene and acetylene (Lucchini, V.; Modena, G. J. Am. Chem Soc. 1990, 112, 6291). Values of pK(a) for the ethyl and vinyl cations (-24.8) may thus be derived in the same way as that for the benzenonium ion. Combining these with appropriate values of pK(H2O) then yields pK(R) = -39.8 and -29.6 for the vinyl and ethyl cations, respectively.     

Investigating the M*He exciplexes, M={Li,Na,K,Rb,Cs,Fr}: density functional approach

Potential curves for the ground and the first lowest excited states of the MHe (where M={Li,Na,K,Rb,Cs,Fr}) exciplexes are calculated using the density functional theory (DFT) formalism. Relativistic calculations are carried out with and without spin-orbit (SO) coupling effect, using a zeroth order regular approximation (ZORA) approach. The depth De and position Re parameters of the potential curves for the case without spin-orbit effect are presented and compared with other works. Potential curves for Li-He, Cs-He, and Fr-He without spin-orbit effect and Cs-He with the spin-orbit effect are shown. A bond analysis is presented too, since the central interest of the study of the exciplexes is the nature and the existence of the bonding states that are the origin of emission spectra observed experimentally for these systems.     

Protonation constants of 1-hydroxyethylidene-1,1-diphosphonic acid, diethylenetriamino-N,N,N',N',N'-penta-acetic trans-1,2-diaminocyclohexane-N,N,N',N'-tetra-acetic acid

The stepwise stability constants for the protonation of hydroxyethylidenediphosphonic acid (HEDP), diethylenetriaminopenta-acetic acid (DTPA) and diaminocyclohexanetetra-acetic acid (DCTA) have been determined potentiometrically with a hydrogen electrode at an ionic strength of 1 (KCl) and at 10-35 degrees . The data were treated by a least-squares method for estimation of DeltaH and DeltaS values.     

General synthesis and structural evolution of a layered family of Ln8(OH)20Cl4 x nH2O (Ln = Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, and Y)

The synthesis process and crystal structure evolution for a family of stoichiometric layered rare-earth hydroxides with general formula Ln(8)(OH)(20)Cl(4) x nH(2)O (Ln = Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, and Y; n approximately 6-7) are described. Synthesis was accomplished through homogeneous precipitation of LnCl(3) x xH(2)O with hexamethylenetetramine to yield a single-phase product for Sm-Er and Y. Some minor coexisting phases were observed for Nd(3+) and Tm(3+), indicating a size limit for this layered series. Light lanthanides (Nd, Sm, Eu) crystallized into rectangular platelets, whereas platelets of heavy lanthanides from Gd tended to be of quasi-hexagonal morphology. Rietveld profile analysis revealed that all phases were isostructural in an orthorhombic layered structure featuring a positively charged layer, [Ln(8)(OH)(20)(H(2)O)(n)](4+), and interlayer charge-balancing Cl(-) ions. In-plane lattice parameters a and b decreased nearly linearly with a decrease in the rare-earth cation size. The interlamellar distance, c, was almost constant (approximately 8.70 A) for rare-earth elements Nd(3+), Sm(3+), and Eu(3+), but it suddenly decreased to approximately 8.45 A for Tb(3+), Dy(3+), Ho(3+), and Er(3+), which can be ascribed to two different degrees of hydration. Nd(3+) typically adopted a phase with high hydration, whereas a low-hydration phase was preferred for Tb(3+), Dy(3+), Ho(3+), Er(3+), and Tm(3+). Sm(3+), Eu(3+), and Gd(3+) samples were sensitive to humidity conditions because high- and low-hydration phases were interconvertible at a critical humidity of 10%, 20%, and 50%, respectively, as supported by both X-ray diffraction and gravimetry as a function of the relative humidity. In the phase conversion process, interlayer expansion or contraction of approximately 0.2 A also occurred as a possible consequence of absorption/desorption of H(2)O molecules. The hydration difference was also evidenced by refinement results. The number of coordinated water molecules per formula weight, n, changed from 6.6 for the high-hydration Gd sample to 6.0 for the low-hydration Gd sample. Also, the hydration number usually decreased with increasing atomic number; e.g., n = 7.4, 6.3, 7.2, and 6.6 for high-hydration Nd, Sm, Eu, and Gd, and n = 6.0, 5.8, 5.6, 5.4, and 4.9 for low-hydration Gd, Tb, Dy, Ho, and Er. The variation in the average Ln-O bond length with decreasing size of the lanthanide ions is also discussed. This family of layered lanthanide compounds highlights a novel chemistry of interplay between crystal structure stability and coordination geometry with water molecules.     

Determination of trace amounts of cadmium, cobalt, chromium, iron, molybdenum, nickel, selenium, titanium, vanadium and zinc in blood and milk by neutron activation analysis

The concentrations of Cd, Co, Cr, Fe, Mo, Ni, Se, Ti, V and Zn in biological fluids, human blood serum and market milk were determined by neutron activation analysis, with enrichment by coprecipitation. The pre-concentration of these trace elements was accomplished by converting the dissolved trace metal ions into their pyrrolidinedithiocarbamate (1-pyrrolidinecarbodithioate) chelates, followed by coprecipitation with a metal carrier such as Ni, Pb or Bi. The coprecipitation was carried out prior to irradiation for the short-lived nuclides (V, Ti and Se) and after irradiation for the other elements. The validity of the method was checked using certified biological reference materials; the concentrations of trace elements found by the proposed method agreed well with the published certified data. The limits of detection for Cd, Co, Cr, Fe, Mo, Ni, Se (obtained through the long-lived isotope 75Se) and Zn under the present experimental conditions were found to be 5, 5, 10, 520, 5, 70, 10 and 150 ng, respectively, for 5 ml of biological liquor. The limits of detection for Ti and V obtained (through their short-lived radionuclides 51Ti and 52V, respectively) were found to be 180 and 1.4 ng, respectively, for 50 ml of market milk, or 70 and 0.7 ng for 1 ml of blood serum.     

Poly(lactide) stereocomplexes: formation, structure, properties, degradation, and applications

Poly(lactide)s [i.e. poly(lactic acid) (PLA)] and lactide copolymers are biodegradable, compostable, producible from renewable resources, and nontoxic to the human body and the environment. They have been used as biomedical materials for tissue regeneration, matrices for drug delivery systems, and alternatives for commercial polymeric materials to reduce the impact on the environment. Since stereocomplexation or stereocomplex formation between enantiomeric PLA, poly(L-lactide) [i.e. poly(L-lactic acid) (PLLA)] and poly(D-lactide) [i.e. poly(D-lactic acid) (PDLA)] was reported in 1987, numerous studies have been carried out with respect to the formation, structure, properties, degradation, and applications of the PLA stereocomplexes. Stereocomplexation enhances the mechanical properties, the thermal-resistance, and the hydrolysis-resistance of PLA-based materials. These improvements arise from a peculiarly strong interaction between L-lactyl unit sequences and D-lactyl unit sequences, and stereocomplexation opens a new way for the preparation of biomaterials such as hydrogels and particles for drug delivery systems. It was revealed that the crucial parameters affecting stereocomplexation are the mixing ratio and the molecular weight of L-lactyl and D-lactyl unit sequences. On the other hand, PDLA was found to form a stereocomplex with L-configured polypeptides in 2001. This kind of stereocomplexation is called "hetero-stereocomplexation" and differentiated from "homo-stereocomplexation" between L-lactyl and D-lactyl unit sequences. This paper reviews the methods for tracing PLA stereocomplexation, the methods for inducing PLA stereocompelxation, the parameters affecting PLA stereocomplexation, and the structure, properties, degradation, and applications of a variety of stereocomplexed PLA materials.     

ICP-AES法测定化妆品中铅、镉、砷、汞、锑、铬、镍、钡、锶等禁限用元素含量

建立了化妆品中铅(Pb)、镉(Cd)、砷(As)、汞(Hg)、锑(Sb)、铬(Cr)、镍(Ni)、钡(Ba)、锶(Sr)含量的电感耦合等离子体原子发射光谱法(ICP-AES)同步检测技术。采用微波消解,在较难消化的化妆品中加HF进行消化,铑(Rh)为内标元素消除基体干扰,以配备耐HF进样系统的ICP-AES进行测定。在0～1.0 mg/L范围内呈现良好的线性关系(相关系数≥0.9999),Pb、Cd、As、Hg、Sb、Cr、Ni、Ba、Sr检出限分别为0.0016,0.0007,0.0021,0.0013,0.0003,0.0009,0.0008,0.0009,0.0021 mg/L,方法回收率80.2%～111%,精密度1.7%～8.2%。结果表明,该方法适用于检测基体复杂的化妆品中Pb、Cd、As、Hg、Sb、Cr、Ni、Ba、Sr。     

Synthesis and structure of (Ph4P)2MCl6 (M = Ti, Zr, Hf, Th, U, Np, Pu)

High-purity syntheses are reported for a series of first, second, and third row transition metal and actinide hexahalide compounds with equivalent, noncoordinating countercations: (Ph(4)P)(2)TiF(6) (1) and (Ph(4)P)(2)MCl(6) (M = Ti, Zr, Hf, Th, U, Np, Pu; 2-8). While a reaction between MCl(4) (M = Zr, Hf, U) and 2 equiv of Ph(4)PCl provided 3, 4, and 6, syntheses for 1, 2, 5, 7, and 8 required multistep procedures. For example, a cation exchange reaction with Ph(4)PCl and (NH(4))(2)TiF(6) produced 1, which was used in a subsequent anion exchange reaction with Me(3)SiCl to synthesize 2. For 5, 7, and 8, synthetic routes starting with aqueous actinide precursors were developed that circumvented any need for anhydrous Th, Np, or Pu starting materials. The solid-state geometries, bond distances and angles for isolated ThCl(6)(2-), NpCl(6)(2-), and PuCl(6)(2-) anions with noncoordinating counter cations were determined for the first time in the X-ray crystal structures of 5, 7, and 8. Solution phase and solid-state diffuse reflectance spectra were also used to characterize 7 and 8. Transition metal MCl(6)(2-) anions showed the anticipated increase in M-Cl bond distances when changing from M = Ti to Zr, and then a decrease from Zr to Hf. The M-Cl bond distances also decreased from M = Th to U, Np, and Pu. Ionic radii can be used to predict average M-Cl bond distances with reasonable accuracy, which supports a principally ionic model of bonding for each of the (Ph(4)P)(2)MCl(6) complexes.     

Behaviour of the dithiocarbamate complexes of arsenic, antimony, bismuth, mercury, lead, tin and selenium in methanol with a hydride generator

A study was carried out with a continuous hydride generator coupled to an atomic emission spectrometer with inductively-coupled plasma to determine whether hydrides of As, Bi, Pb, Sb, Sn and Se and mercury vapor could be generated in methanol solutions of their dithiocarbamate complexes. It was found that (with the exception of Pb) hydride generation with sufficient efficiency for simultaneous multi-element determination is achieved using 0.25% NaBH(4)-0.6 mol 1(-1) HCl as reaction medium. The detection limit was found to be 0.2 ng ml(-1) for As, 30 ng ml(-1) for Bi, 0.03 ng ml(-1) for Se, Sb and Sn.     

Determination of zirconium, barium, lanthanum, aluminium, sodium, hafnium and fluorine in fluorozirconate glasses

Summary A procedure is described for the determination of the cationic and anionic components in fluorozirconate glasses. Zirconium, barium, aluminium, lanthanum, sodium and hafnium were determined by inductively coupled plasma atomic emission spectrometry (ICP/AES) after dissolution of the sample with an acid mixture in a microwave oven. The fluorine content was evaluated with two different techniques, namely potentiometry with a fluoride ion-selective electrode (FISE) and ion chromatography (IC). In this case the sample was solubilized by fusion with sodium carbonate.     

Tuning of optical band gaps: syntheses, structures, magnetic properties, and optical properties of CsLnZnSe(3) (Ln = Sm, Tb, Dy, Ho, Er, Tm, Yb, and Y)

Eight new quaternary selenides CsSmZnSe(3), CsTbZnSe(3), CsDyZnSe(3), CsHoZnSe(3,) CsErZnSe(3), CsTmZnSe(3), CsYbZnSe(3), and CsYZnSe(3) have been synthesized with the use of high-temperature solid-state experimental methods. These compounds are isostructural with KZrCuS(3), crystallizing with four formula units in the orthorhombic space group Cmcm. The structure of these CsLnZnSe(3) compounds is composed of [LnZnSe(3)(-)] layers separated by Cs atoms. The Ln atom is octahedrally coordinated by six Se atoms, the Zn atom is tetrahedrally coordinated by four Se atoms, and the Cs atom is coordinated by a bicapped trigonal prism of eight Se atoms. Because there are no Se-Se bonds in the structure, the oxidation state of Cs is 1+, that of Ln is 3+, and that of Zn is 2+. CsYbZnSe(3) exhibits an antiferromagnetic transition at 11 K, whereas CsSmZnSe(3) does not follow a Curie-Weiss law. The remaining rare-earth compounds are paramagnetic, and the calculated effective magnetic moments of the rare-earth ions agree well with their theoretical values. Optical absorption data on face-indexed single crystals of CsSmZnSe(3), CsErZnSe(3), CsYbZnSe(3), and CsYZnSe(3) demonstrate that the optical band gap changes by more than 0.75 eV with the composition and by as much as 0.20 eV with the crystal orientation. The optical band gaps range from 2.63 eV (CsSmZnSe(3), CsErZnSe(3)) to 1.93 eV (CsYbZnSe(3)) for the (010) crystal face and 2.56 eV (CsErZnSe(3)) to 1.88 eV (CsYbZnSe(3)) for the (001) crystal face. The difference in the optical band gap of the (010) face vs the (001) face varies from +0.05 eV (CsYbZnSe(3)) to +0.20 eV (CsSmZnSe(3)).     

Determination of abamectin, doramectin, emamectin, eprinomectin, ivermectin, and moxidectin in milk by liquid chromatography electrospray tandem mass specrometry

The avermectin and milbemycin families of compounds are derived from naturally occurring yeasts. They have proven to be potent preventatives against a variety of pests such as insects and parasites. Only eprinomectin and moxidectin are currently approved for use on lactating cattle with tolerances in milk of 12 microg/kg for eprinomectin and 40 microg/kg for moxidectin. Detection of misuse or inadvertent contamination in milk requires a sensitive and definitive analytical method. A method has been developed for the determination of 5 avermectins and 1 milbemycin in milk using a simple liquid-liquid extraction and liquid chromatography/tandem mass spectrometry (LC/MS/MS) analysis. Ivermectin (IVR), doramectin (DOR), abamectin (ABA), eprinomectin (EPR), emamectin (EMA), and moxidectin (MOX) were extracted from whole milk by partitioning into acetonitrile with a subsequent solvent exchange into methanol-water. Simultaneous confirmation and quantification were achieved with LC separation, positive electrospray ionization (ESI+), and MS/MS. The limits of detection ranged from 16 pg/g (ppt) for EMA to 1.7 microg/g (ppb) for MOX.     

S(N)Ar displacements with 6-(fluoro, chloro, bromo, iodo, and alkylsulfonyl)purine nucleosides: synthesis, kinetics, and mechanism1

SNAr reactions with 6-(fluoro, chloro, bromo, iodo, and alkylsulfonyl)purine nucleosides and nitrogen, oxygen, and sulfur nucleophiles were studied. Pseudo-first-order kinetics were measured with 6-halopurine compounds, and comparative reactivities were determined versus a 6-(alkylsulfonyl)purine nucleoside. The displacement reactivity order was: F > Br > Cl > I (with BuNH2/MeCN), F > Cl approximately Br > I (with MeOH/1,8-diazabicyclo[5.4.0]undec-7-ene (DBU)/MeCN), and F > Br > I > Cl [with K+ -SCOCH3/dimethyl sulfoxide (DMSO)]. The order of reactivity with a weakly basic arylamine (aniline) was: I > Br > Cl > F (with 5 equiv of aniline in MeCN at 70 degrees C). However, those reactions with aniline were autocatalytic and had significant induction periods ( approximately 50 min for the iodo compound and approximately 6 h for the fluoro analogue). Addition of trifluoroacetic acid (TFA) eliminated the induction period, and the order then was F > I > Br > Cl (with 5 equiv of aniline and 2 equiv of TFA in MeCN at 50 degrees C). The 6-(alkylsulfonyl)purine nucleoside analogue was more reactive than the 6-fluoropurine compound with both MeOH/DBU/MeCN and iPentSH/DBU/MeCN and was more reactive than the Cl, Br, and I compounds with BuNH2 and aniline/TFA. Titration of the 6-halopurine nucleosides in CDCl3 with TFA showed progressive downfield 1H NMR chemical shifts for H8 (larger) and H2 (smaller). The major site of protonation as N7 for both the 6-fluoro and 6-bromo analogues was confirmed by large upfield shifts ( approximately 16 ppm) of the 15N NMR signal for N7 upon addition of TFA (1.6 equiv). Mechanistic considerations and resolution of prior conflicting results are presented.