Determination of Mn,Co, Cu,Zn, Ag,Bi, Cd,Se, Cr and Te in anatolian iron artifacts by instrumental neutron activation analysis and atomic absorption spectrophotometry

Two methods of concentration of Ag, As, Cd, Co, Cr, Cu, Fe, Hg, In, Mo, Mn, Sb, Sc, Se, W and Zn from water have been elaborated. The trace elements are preconcentrated by coprecipitation with thionalide at pH 9, 1 and 0 or by sorption on ion exchange resin Dowex 1×2 loaded with 8-hydroxyquinoline-5-sulfonic acid at pH 7.     

Simultaneous separation and preconcentration of trace elements in water samples by coprecipitation on manganese dioxide using D-glucose as reductant for KMnO(4)

A field oriented and economical method of coprecipitation of trace elements like Al, Au, Bi, Cd, Co, Cu, Fe, Mo, Ni, Pb, Pd, Ti, V, W, Zn and REE has been developed. A novel reductant D-glucose, reduces KMnO₄ in solution to form a precipitate of MnO_2. Two liters of clear natural water sample is adjusted to pH 3.5–4.0, and is treated with 10 ml of 1% KMnO₄ and 20 ml of 0.1% D-glucose. The sample is heated at a temperature of 75–80 °C, MnO₂ is formed which coprecipitates the above trace elements. The precipitate is separated by filtration, dissolved in 2 ml of 50% HCl and 2 ml of 30% H₂O₂ and diluted to 25 ml for analysis using AAS and ICP-AES. The recoveries were found to be 96–105%. The preconcentration factor is 80. Limits of determination by the proposed method in natural waters are 1 μg l⁻¹ for Al, Cd, Mo, V, W, Ti and Zn, 5 μg l⁻¹ for Au, Bi, Co, Cu, Fe, Ni, Pb and Pd and 8 μg l⁻¹ for REE. The RSD of the present procedure (n=5) is 8% at 5 μg l⁻¹ level. Twenty water samples can be analyzed by an analyst in an 8-h day.     

Determination of trace elements by inductively coupled plasma mass spectrometry of biomass and fuel oil reference materials using milligram sample sizes

Most of the analytical techniques used to quantify elements associated with solid samples suffer from high detection limits and cannot be used for trace elements in biomass samples, particularly when only 20 mg are available for analysis. Inductively coupled plasma mass spectrometry (ICP-MS) can achieve detection limits of parts-per-trillion with liquid sample introduction by solution nebulisation. This technique was therefore tested with two standard biomass reference materials: oriental tobacco leaves and cabbage leaves. Two preparations successfully used on coal standards were used to digest the solid samples: a total digestion method (wet ashing digestion) and a partial leaching (microwave extraction). The concentrations of up to seventeen elements (As, Ba, Be, Cd, Co, Cr, Cu, Ga, Mn, Mo, Ni, Pb, Sb, Se, Sn, V and Zn) were measured after the two preparations. The accuracy and sensitivity of the measurements improved when the dilution factor decreased from 5000 to 1000 and to 500. Since the proportion of mineral matter in biomass samples is small (5%), the microwave digestion extracted elements that are generally not completely extracted from coal samples (e.g. Sb). However, some trace element concentrations were below the limit of quantification after microwave extraction, even with a reduced dilution factor (As, Se and Mo) and could not be quantified. A fuel oil was also digested. The trace element concentrations were very low (between 28 and 0.1 microgram g(-1)) but acceptable results were obtained by applying a dilution factor of 100. Only six elements in the fuel oil (As, Ba, Co, Ni, Se and V) had certified or indicated values. Factors affecting the accuracy and sensitivity of the analyses are discussed. The reproducibility of analysis of the tobacco leaf standard was checked over a period of nine months by both digestion methods. The wet ashing method gave acceptable reproducibility for Ba, Cd, Co, Cu, Ga, Mn, Mo, Ni, Pb, V and Zn but poor precision for Cr, Se and Sn and showed evidence of residual chloride interference for As. The microwave extraction gave good reproducibility for As, Ba, Cd, Co, Cr, Cu, Mo, Ni and Zn but poor precision for Se and low recoveries for Ga, Mn, Sn and V. In spite of the small quantities of material analysed, it proved possible to determine the trace elements at levels down to 0.1 microgram g(-1) in the reference materials.     

Major elements as possible factors of trace element urban pedochemical anomalies

The relationship between real total contents of the major elements Na, Mg, Al, Si, P, S, K, Ca, Ti, Fe and the trace elements Ag, As, B, Ba, Co, Cr, Cu, Mn, Mo, Ni, Pb, Sb, Se, Sn, V, U, Zn in topsoil from the central part of Vilnius is analysed. The amounts of most elements were determined by energy-dispersive X-ray fluorescence, while amounts of Ag, B, Co were measured by optical atomic emission spectrophotometry. Two factors were distinguished according to major elements: anthropogenic (A) including Ca, Mg, Fe, P, S and clayey (C) including K, Al, Ti. Boron, Mn, Cr and U are significantly correlated with members of both factors, Sb with none of them and other trace elements either with all (Cu, Zn, Pb, Se, Ba, Ni, Co) or with separate (V, Ag, Sn, Mo, As) members of the A-factor. Only B, Mn, Cr, U (partly their additive index Z1) are influenced by the C-factor, while twelve other trace elements (also their additive index Z2) are influenced by the A-factor. The additive index Z of all 17 elements is also affected by the A-factor. Four groups of sites have been distinguished according to normal or higher contents of both factors. The majority of trace element anomalies are related to the sites affected by the A-factor.     

An application of neutron activation analysis to biological materials

Fourteen trace elements (short-lived nuclides: Al, Br, Cu, Mn and V; long-lived nuclides: Ag, Au, Cd, Co, Cr, Fe, Sc, Se and Zn) in human eye tissues are determined simultaneously by non-destructive neutron activation analysis. The quantity of Al, Br, Fe, Se and Zn in the eye tissues (about 1 to more than 10 μg/g dry weight tissue) seems to be higher than that of other trace elements, although content of each trace element in individual tissue are scattered in a wide range. Conjunctiva, iris (+ciliary body) and choroid (+pigment epithelium) seem to contain larger amount of various trace elements than other eye tissues. From correlation studies it is evident that the relative distribution of 14 trace elements in various eye tissues are similar, and furthermore the content of trace elements in the eye tissues may be correlated in each of the three groups (group A: Cd, Fe, Se and Zn; group B: Al, Cr, Fe, Se and V; group C: Al, Au, Fe and Se).     

Neutron activation as a routine method for the determination of trace elements in water

By freeze-drying the following elements can be determined in natural water except sea water: Au, Ba, Br, Ca, Ce, Co, Cr, Eu, Fe, K, La, Mo, Na, Sb, Sc, Se, U, Zn. Some problems may arise with respect to As and Hg. Cu, Cd and Ni can only be determined if present in high concentrations. Separation by adsorption on charcoal in presence of complexing agents gives yields between 75 and 100% for the following elements in sea water: Ag, Au, Cd, Ce, Co, Cr, Eu, Fe, Hg, La, Mo, Sc, Se, U, Zn (As 67%, Sb 56%). Activation or use of labelled ions and study of exchange give information about mobility of trace elements in suspended matter.     

Determination of trace elements in the water cycle by total-reflection x-ray fluorescence spectrometry

The determination of trace elements in the various stages of the water cycle is very important. Economic procedures for multi-element determinations of trace elements in various matrices are needed. The applications of total-reflection x-ray fluorescence spectrometry in this general area are reviewed briefly, with examples relating to rain, river and sea waters, sediments, particulate matter and manganese nodules and crusts, as well as mussel tissue. Up to 25 elements can be determined; these are S, K, Ca, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Ga, As, Pb, Se, Rb, Sr, Y, Zr, Mo, Ag, Cd, Sb and Ba. Preliminary treatments of the various matrices are described. Accuracy checks by analysis of reference standards and by application of independent techniques are reported.     

电感耦合等离子体原子发射光谱法测定马奶酒中的多种元素

电感耦合等离子体原子发射光谱法测定马奶酒中的多种元素嘎日迪,乌地（内蒙古师范大学化学系,配位化学研究所,呼和浩特,０１００２２）关键词电感耦合等离子体原子发射光谱,马奶酒,微量金属元素蒙古民族喜爱的传统饮料──马奶酒（蒙语“策格”）是用鲜马奶为原料发...     

Trace element content of some Polish hard and brown coals

Instrumental neutron activation analysis /INAA/ method was applied to measure major, minor and trace elements in 34 samples of hard and brown coal originating from eight Polish coal mines. The elemental concentrations of 38 elements /Na, Mg, Al, Cl, K, Ca, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Ga, As, Se, Br, Rb, Sr, Mo, Ag, Cd, In, Sb, I, Cs, Ba, La, Ce, Sm, Eu, Lu, W, Au and Th/ are presented and compared with published data for coals from various origin. Enrichment factors, calculated relative to iron and the average crustal rock composition, indicated that several elements are highly enriched in Polish coals.     

煤中痕量元素在循环流化床锅炉中的迁移行为与富集特性

对天津市某电厂循环流化床(CFB)锅炉燃用的原煤及燃烧产物底灰、飞灰、细飞灰(≤50 μm)进行痕量元素含量的测定,分析了Be、Zn、Hg、V、Cr、Mn、Co、Ni、Cu、As、Se、Cd、Pb 13种痕量元素在燃烧过程中的迁移行为,揭示了痕量元素在CFB锅炉中的分配、富集特性。结果表明,CFB锅炉中,较低的炉温对于痕量元素的迁移富集产生了较大的影响。由相对富集系数得知,Be、V、Co、Se在底灰中耗散,在飞灰中富集,Zn、Mn倾向于在底灰中富集,元素Cd、Pb、Ni、Cu挥发性较强,在底灰和飞灰中均是耗散。As受钙氧化物影响,挥发性表现并不明显。Hg在底灰和飞灰中相对富集系数均很低,表明Hg在整个燃烧过程中以气态形式排放;Hg、As、Se、V、Cr、Mn、Co、Ni、Cu、Zn、Pb均有向小颗粒物中富集的趋势。根据相对富集系数以及研究的13种元素在低温CFB锅炉中的迁移行为,将这些元素分为三类:A类(E_R<0.1),主要是以气态形式排放元素Hg;B类(0.1R≤0.85),较易挥发元素As、Be、Ni、Cu、Se、Cd、Pb、Co、V;C类(E_R>0.85),主要残留在固体产物中元素Zn、Mn、Cr。     

不同产地高良姜无机元素含量的比较

用等离子体发射光谱法测定了三个不同产地高良姜的元素含量，在２７种被测元素中，除Ａｓ、Ｂｅ、Ｃｒ、Ｍｏ、Ｐｂ、Ｓｂ、Ｔｌ７种元素未被检出外，三个产地的高良姜均含有Ａｇ、Ａｌ、Ｂ、Ｂａ、Ｃａ、Ｃｄ、Ｃｏ、Ｃｕ、Ｆｅ、Ｍｇ、Ｍｎ、Ｎａ、Ｎｉ、Ｓｅ、Ｓｉ、Ｖ、Ｚｎ、Ｋ、Ｐ、Ｓ２０种元素，湛江产的高良姜大多数元素的含量要高于其它两地。Ｚｎ和Ｍｎ两种人体必需微量元素的含量较丰富。     

Determination of 24 elements in four algae reference materials by neutron activation analysis and inductively coupled plasma mass spectrometry

Four algae reference materials, IAEA-391, 392, 393 and IAEA-140, prepared by the International Atomic Energy Agency for intercomparison under different preparation conditions were analyzed for 24 elements. Conventional neutron activation analysis (NAA) was used to determine Al, Ca, Cl, Co, Cr, Cu, Fe, K, Mg, Mn, Mo, Na, Sb, V and Zn and epithermal NAA using BN and Cd as shielding material for I, Br, As, Ni, Mo and Cd. Inductively coupled plasma mass spectrometry (ICP-MS) as a complementary and comparative method was applied to determine Pb, Sn, Ni, Sr, Rb, As, Co, Cr, Cu, Mn, V, Mo and Zn. Two analytical quality control standard reference materials IAEA-V-10 (hay powder) and IAEA-331 (spinach) were analyzed simultaneously with real samples. The results agree quite well with each other and with the certified values.     

Preconcentration by dithiocarbamate extraction for determination of trace elements in natural waters by inductively-coupled plasma atomic emission spectrometry

Preconcentration by dithiocarbamate extraction into 2-ethylhexyl acetate for simultaneous determination of trace elements in natural water is described. After 250-fold concentration, the organic phase is used directly for inductively-coupled plasma atomic emission spectrometry. Thirteen elements (As, Se, Mo, Zn, Cd, Ni, Co, Sn, Fe, Cr(VI), Pb, V and Cu) are simultaneously concentrated at pH 4.3 with the combination of ammonium tetramethylenedithiocarbamate and dibenzylammonium dibenzyldithiocarbamate and are determined in the extract; Mn and Cr(III) are also determined after preconcentration at pH 6.9 with the same chelating agents. Lake waters are analyzed by this method.     

Determination of trace elements in ambient aerosol samples

A microwave-assisted digestion procedure using HNO₃, HF, and H₂O₂ has been developed for analysis of elements in ambient particulate matter (PM). The samples are collected on cellulose filters and analyzed by inductively coupled plasma mass spectrometry (ICP-MS). The ICP-MS is calibrated with external standards, and recovery of analytes is tested with NIST SRM 1648 Urban Dust. This method has been used to quantify the airborne concentrations of a large number of elements, including Ag, As, Ba, Be, Ca, Cd, Ce, Co, Cr, Cs, Cu, Fe, Ga, K, Li, Mg, Mn, Mo, Ni, Pb, Rb, Se, Sb, Sr, Ti, Tl, V, and Zn. For the majority of these elements, recovery of the NIST SRM is within 15% of the certified values.     

A solid phase extraction using a chelate resin immobilizing carboxymethylated pentaethylenehexamine for separation and preconcentration of trace elements in water samples

A chelate resin immobilizing carboxymethylated pentaethylenehexamine (CM-PEHA resin) was prepared, and the potential for the separation and preconcentration of trace elements in water samples was evaluated through the adsorption/elution test for 62 elements. The CM-PEHA resin could quantitatively recover various elements, including Ag, Cd, Co, Cu, Fe, Ni, Pb, Ti, U, and Zn, and rare earth elements over a wide pH range, and also Mn at pH above 5 and V and Mo at pH below 7. This resin could also effectively remove major elements, such as alkali and alkaline earth elements, under acidic and neutral conditions. Solid phase extraction using the CM-PEHA resin was applicable to the determination of 10 trace elements, Cd, Co, Cu, Fe, Mn, Mo, Ni, Pb, V, and Zn, in certified reference materials (EnviroMAT EU-L-1 wastewater and ES-L-1 ground water) and treated wastewater and all elements except for Mn in surface seawater using inductively coupled plasma atomic emission spectrometry. The detection limits, defined as 3 times the standard deviation for the procedural blank using 500 mL of purified water (50-fold preconcentration, n = 8), ranged from 0.003 μg L⁻¹ (Mn) to 0.28 μg L⁻¹ (Zn) as the concentration in 500 mL of solution.     

Feasibility of instrumental neutron activation analysis for trace element studies in natural soils

Fifty natural surface soils with strongly variable organic matter content and elemental composition were investigated to see to what extent INAA would prove useful for multi-element surveys. A conventional scheme of irradiations and decay intervals was used and 35 elements were investigated. Detection limits of the various trace elements were studied with respect to the influence of elements giving rise to major radionuclides in activated samples. For the 18 elements Na, Al, K, Sc, Cr, Mn, Fe, Co, Zn, Br, Sb, Cs, Ba, La, Sm, Hf, Th, the performance of INAA was very good. Useful results were also obtained for V, As, Se, Rb, Sr, I, Ta, and Au, while the technique appeared marginal for Cl, Zr, Mo, Ag, and Hg, and unsatisfactory for Mg, Ti, Ni, and Cd.     

Simultaneous multi-element analysis of trace elements in soil samples by means of high-resolution inductively coupled plasma sector field mass spectrometry (SF-ICP-MS)

The potential of SF-ICP-MS for trace element analysis in complex environmental matrices such as soil solutions was investigated. Spectral interferences found in mass spectra of soil matrices are presented in detail. Furthermore, the influences of single components of the soil matrix on the signal intensity of selected elements were studied. Detection limits of different elements are presented with respect to the composition of the matrix. A fast and accurate method for quasi-simultaneous determination of Al, Si, P, V, Cr, Mn, Fe, Ni, Co, Cu, Zn, As, Se, Sr, Mo, Cd, Sn, Hg and Pb in aqueous soil extracts was established.     

A comparison of two separation techniques using NaI(Tl) and Ge(Li) spectrometry for trace element determination in biological materials by neutron activation analysis

A comparison of two group separation techniques using either NaI(Tl) or Ge(Li) spectrometry is presented for trace element determination in biological materials by neutron activation analysis. The capabilities of both procedures are described in terms of detection limits, precision and accuracy for the determination of the elements As, Cd, Co, Cr, Cu, Fe, Hg, Mo, Ni, Sb, Se, Sn, and Zn in various types of biological samples. For this purpose the (standard) reference materials NBS SRM-1577 Bovine Liver, Bowen's Kale, IAEA Pig Kidney H-7 and IAEA Milk Powder A-11 were analyzed. An attempt was also made to minimize blank values for several elements.     

Polarographic determination of cadmium, lead, nickel, thallium and uranium(VI) in isoquinoline formate

Summary The polarographic behaviour of Cd, Pb, Ni, Tl and U(VI) has been described in 0.1 M isoquinoline formate as base electrolyte. In all cases well defined reversible waves were obtained and determinations are possible in the presence of Mo, Co, Zn, Mn, Te, In, Se, Fe, Cr, V, Th, Zr, As, Sb, Ag, Hg and Cu.

---

Polarographische Bestimmung von Cadmium, Blei, Nickel, Thallium und Uran(VI) in Isochinolinformiat

Zusammenfassung Das polarographische Verhalten von Cd, Pb, Ni, Th. und U(VI) in 0,1 M Isochinolinformiatlösung wird beschrieben, Bestimmungsmöglichkeiten werden aufgezeigt. In allen Fällen werden gut definierte reversible Stufen erhalten. Folgende Elemente stören nicht: Mo, Co, Zn, Mn, Te, In, Se, Fe, Cr, V, Th, Zr, As, Sb, Ag, Hg, Cu.