Hf4+共掺NaYF4:Yb/Tm提高上转换发光性能研究

利用X射线多晶衍射仪、场发射扫描电镜、场发射透射电镜、X射线光电子能谱和荧光光谱仪对相近半径离子Hf⁴⁺和Zr⁴⁺共掺六方NaYF₄:Yb³⁺/Tm³⁺的结构、形貌和上转换发光性能进行研究.结果表明Hf⁴⁺和Zr⁴⁺离子共掺六方NaYF₄:Yb³⁺/Tm³⁺可有效调控晶场的不对称性, Hf⁴⁺相对于Zr⁴⁺是个更好的掺杂离子,它在调控晶场的同时还参与Tm³⁺离子上转换发光的能量传递过程,明显提高了短波500 nm以下发射带的荧光强度;而Zr⁴⁺离子仅扮演晶场调控角色而未能参与稀土离子Tm³⁺的上转换发光过程, Tm³⁺离子小于500 nm短波发射带的荧光强度没有得到明显的提高,仅提高802 nm发射带的荧光强度.该研究发现Hf⁴⁺可作为蓄能离子参与稀土离子的上转换发光过程,有助于将Hf⁴⁺作为蓄能离子和晶格操纵工具用于设计和制备其它高性能的稀土上转换发光材料.     

In3+共掺杂诱导NaY0.95-xYb0.03Er0.02F4相转变与上转换发光增强研究

引入In³⁺作为新的掺杂离子通过水热法合成了In³⁺与Er³⁺,Yb³⁺共掺杂的NaYF₄上转换发光材料. 通过XRD表征及Rietveld精修,SEM以及TEM研究了In掺杂引起的NaYF₄形貌与晶体结构的变化. 通过发射光谱与发光衰减曲线表征了掺杂NaYF₄的上转换发光性能,以研究晶体微观结构与上转换发光性能之间的关系. 结果表明随着In掺杂量的增加,立方相NaYF₄的晶格畸变不断增强且发生由立方相向六方相的转变. 对于六方相NaYF₄,其上转换发光强度随着In含量的提高不断增强并当In含量为3%时达到最大值. 该研究结果可以有助于设计与合成具有优良上转换发光性能的材料.     

NaYF4:Yb3+/Er3+单颗粒微米棒偏振上转换发光及其取向示踪※

稀土掺杂微/纳材料的偏振上转换发光在单颗粒示踪和生物医学等领域具有广泛的应用前景. 稀土离子的偏振上转换发光主要取决于其局域态的电子结构和激发态动力学. 利用单颗粒偏振上转换光学测试平台对β-NaYF₄:Yb³⁺/ Er³⁺微米棒的偏振上转换发光进行了系统研究. 随发射偏振角的变化, 单个微米棒的上转换发光强度发生周期性改变, 且来自Er³⁺同一光谱支项的不同晶体场子能级跃迁的偏振方向不同. 与光谱支项整体的上转换发光相比, 其晶体场子能级上转换发光表现出更大的发射偏振度. 利用Er³⁺高度偏振的晶体场跃迁谱线, 实现了对单个微米棒空间取向的动态分析, 揭示了NaYF₄:Yb³⁺/Er³⁺微米棒作为偏振各向异性的上转换荧光探针在单颗粒取向示踪方面的潜在应用.     

氟离子浓度对稀土掺杂上转换发光纳米材料形貌及荧光寿命的影响

利用溶剂热法制备了Yb³⁺、Er³⁺共掺的NaYF₄上转换发光纳米材料。实验结果表明,不同F^-离子对纳米晶的晶型和粒径尺寸起着重要的作用。低F^-离子浓度下,NaYF₄纳米材料的粒径尺寸随F^-离子浓度的增加逐渐变小且趋于均一;高F^-离子浓度下,六方晶相的形成受到抑制,上转换纳米晶出现团聚现象。在一定浓度范围内,F^-离子的浓度有利于促进荧光发射。同时F^-离子浓度对荧光寿命也有显著的影响。     

锌-稀土矩形纳米簇的构筑及近红外发光性能

本文设计了一个新型含苯-甲基-苯骨架的席夫碱配体,构筑了两个具有矩形结构的锌-稀土纳米簇[Ln₂Zn₂L₂(OAc)₆] (Ln = Yb (1)和Er (2))。该席夫碱配体以“伸展型”配位模式与稀土离子进行配位,使这些锌-稀土纳米簇表现出较大的分子尺寸结构(0.7 nm × 1.1 nm × 2.2 nm)。荧光性质研究表明,由Zn/L组成的发色基团能有效敏化1和2中Yb³⁺和Er³⁺离子的近红外发光。通过对荧光量子产率及寿命进行分析发现,Zn/L对Yb³⁺离子的传能效率要高于Er³⁺离子。     

稀土Yb3+/Tm3+掺杂NaGd(MO4)2荧光粉的制备及其光致发光

近年来稀土掺杂的上转换发光材料在太阳能电池、工业照明和医学等领域的应用越来越受到重视,目前的研究主要集中于新型高效稀土上转换发光材料的开发。对于发光材料的制备,基质的选择尤为重要,钼酸盐因具有稳定的物理化学性能、低的声子能量而从众多基质中脱颖而出。本文选择钼酸盐为稀土离子掺杂的基质材料,采用水热法制备了Tm、Yb离子掺杂的NaGd(MoO₄)₂样品。通过改变离子掺杂的浓度,探究了NaGd(MoO₄)₂荧光粉的发光特性。研究表明,在980 nm激光照射下,NaGd(MO₄)₂∶Yb³⁺/Tm³⁺在477 nm处发射蓝色荧光,在648 nm处发射红色荧光。固定Yb³⁺的掺杂摩尔分数为6%,改变Tm³⁺的掺杂摩尔分数分别为0、0.5%、1%和2%时,发现随着Tm³⁺掺杂摩尔分数的增加,477 nm处的发射峰的强度先升高后降低,当Tm³⁺     

稀土上转换发光材料标记抗体的制备及在免疫组化中的应用

采用微波辐射法合成了具有上转换发光特性的六方相纳米粒子NaGdF₄: Yb³⁺,Er³⁺(UCNPs), 其晶粒大小约为65 nm, 且粒子在980 nm的激发光下显示绿光(550 nm). 进一步在NaGdF₄: Yb³⁺,Er³⁺纳米晶的表面包覆了一层二氧化硅层, 进行氨基功能化后获得了表面共价结合氨基基团的粒径为70 nm的上转换发光纳米微球NaGdF₄: Yb³⁺,Er³⁺@SiO₂-NH₂(UCNPs@SiO₂-NH₂). 通过共价键将UCNPs@SiO₂-NH₂与多克隆抗体免疫球蛋白联接, 将标记后的多克隆抗体应用于传统的免疫组化检测子宫内膜腺细胞中基质金属蛋白酶组织抑制剂-4(TIMP-4)蛋白的表达. 结果表明, 微波合成的稀土上转换发光纳米材料形貌规则且粒径均一, 包覆硅壳后材料具有良好的分散性和水溶性, 荧光强度高且稳定, 在980 nm激发光下对生物组织无背景荧光, 可以很好地检测组织中蛋白质的表达.     

基于上转换发光共振能量转移的CRISPR/Cas12a生物传感系统用于HPV16 DNA双信号检测

传统的纯核结构的上转换纳米材料用于生物传感时, 存在表面猝灭效应或者因发光共振能量转移(LRET)效率不高导致灵敏度低等缺点, 对目标物的灵敏检测有一定的局限性. 本文通过多步高温共沉淀, 介导壳层外延成长法, 合成了NaYF₄∶Yb³⁺,Er³⁺(C-UCNPs)核层发光和NaYF₄@NaYF₄∶Yb³⁺,Er³⁺@NaYF₄(CSS-UCNPs)内壳层发光能量限域型上转换纳米材料, 并表征了材料的晶型、 形貌、 表面配体、 元素组成和发光共振能量转移效率. 结果表明, 该材料具有表面猝灭效应低、 发光共振转移效率较高的优势, 随后将其与成簇规律间隔的短回文重复序列及其相关蛋白(CRISPR/Cas)12a-纳米金系统结合, 实现了人乳头瘤病毒DNA(HPV16 DNA)的比色定性和上转换发光定量分析, 检出限为69.8 pmol/L, 双信号检测有效提高了检测结果的准确性. 此外, 本方法不仅特异性强, 还能识别单碱基错配的HPV16 DNA, 提高了DNA片段的容错率.     

Bi3+掺杂对YVO4:Yb3+近红外发光的敏化作用

用主温固相法合成了Yb³⁺、Bi³⁺共掺的YVO₄,研究了Bi³⁺的掺入对YVO₄:Yb³⁺发光光谱的影响和近红外发光的敏化作用.X射线衍射图谱研究表明:掺入Yb³⁺、Bi³⁺之后,基质YVO₄的晶格结构没有发生明显变化.Bi³⁺的掺入不仅显著增强了样品中Yb³⁺的特征远红外发光强度,还使YVO₄:Yb³⁺激发光谱的范围红移,当Bi³⁺掺入的摩尔分数从0增加到0.05时,样品的最强激发峰位置从335nm红移至352 nm,激发光谱范围由300-360 nm扩宽至300-430 nm.优化的Bi³⁺掺入量为0.03.初步讨论了VO₄^3-,Bi³⁺Yb³⁺间的能量传递机理.结果表明Bi^3-的共掺使YVO₄:Yb³⁺样品对长波紫外光的响应性能大大改善,作为一种基于量子剪裁的光谱转换材料,可以更好地匹配太阳光的能量谱,有助于提高硅太阳能电池的光电转换效率.     

Er3+/Tm3+共掺镱基纳米晶上转换白光调控及应用

稀土掺杂上转换白光材料在固态照明、液晶显示器和信息防伪等领域具有重要应用前景。然而,以前的工作主要集中在惰性基质材料体系,难以大幅提升敏化剂掺杂浓度,大大限制了上转换白光发射强度。为解决这一问题,提出一种基于LiYbF₄@LiYF₄的核壳纳米结构设计,以敏化剂LiYbF₄基质为晶核并掺杂适当浓度的激活剂Er³⁺和Tm³⁺,成功实现980nm激发的上转换白光发射。进一步设计了LiYbF₄∶Er/Tm@LiYbF₄@LiYF₄∶Nd核壳壳结构,利用Nd³⁺吸收808nm激发光,实现了980和808nm双通道激发的上转换白光发射。将白光上转换纳米晶结合940nm近红外芯片封装成发光二极管(LED)器件,施加300mA电流激发出明亮的白光,展示了其在白光LED方面的应用潜力。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.