异腈参与的多组分反应研究进展

多组分反应由于反应本身的经济性和生态价值,越来越受到人们的重视。异腈的亲电和亲核反应均发生在碳原子上,因此在多组分反应中具有重要作用。本文就近年来有异腈参与的多组分反应进行了综述,主要阐述了Ugi反应和Passerini反应及其他含异腈参与的多组分反应的机理、研究开展及应用情况。     

微波有机合成化学最新进展

从反应装置、合成实例、反应机理以及发展趋势等方面概述了微波技术近年来在有机合成中的应用。参考文献67篇。     

流化床煤气化炉内脱硫的研究 Ⅱ．脱硫剂焙烧反应动力学与脱硫反应动力学初步研究

钙质脱硫剂的焙烧反应是炉内脱硫的关键过程，本文研究了影响石灰石和白云石焙烧速率的因素。操作温度７５０℃以上时，焙烧速率很快。ＣＯ_２分压显著地影响焙烧过程，Ｐ_（ＣＯ）２高于平衡分压时，石灰几乎不分解。在本实验的粒度范围内，脱硫剂粒度对焙烧速率影响不大。采用未反应核收缩模型模拟焙烧过程的结果和实验结果基本一致。脱硫反应速率对气相Ｈ_２Ｓ浓度呈一级反应，操作温度特别在６００～７００℃的低温时显著地影响反应速率。     

Friedel-Crafts反应的发现史

介绍Ｆｒｉｅｄｅｌ和Ｃｒａｆｔｓ在进行Ｇｕｓｔａｖｓｏｎ反应的实验过程中如何发现了Ｚｉｎｃｋｅ反应的本质,从而创立了以无水三氯化铝等金属卤化物为催化剂的烷基化和酰基化反应。     

有机锑化合物在交叉偶联反应中的应用研究进展

近年来,有机锑化合物在交叉偶联反应中的应用引起了人们的广泛关注。本文主要对有机锑化合物在交叉偶联反应中的应用作了综述,重点介绍了其在Suzuki交叉偶联反应、Heck偶联反应以及Sonogashira偶联反应中的应用,并展望了其未来的发展方向。     

钯催化的交叉偶联反应——2010年诺贝尔化学奖获奖工作介绍

钯催化的交叉偶联反应是非常实用的合成新方法.文章给出了Heck反应、Negishi反应和Suzuki反应的概念,对其反应机理作了详细的说明,并对其在复杂化合物和天然产物全合成中的应用作了评价.     

铂催化的炔丙醇酯的重排反应以及三级胺氮原子邻位的C—H官能化反应的研究

对我们研究小组近几年在铂催化炔丙醇酯的重排反应以及三级胺氮原子邻位的C—H官能化反应方面取得的成果进行了阶段小结.重点从反应的设计,反应体系中的添加剂等对反应的影响,讨论了不同底物中炔丙醇酯的重排方式,并对相关反应机理进行了讨论.同时我们首次提出了非氧化条件下铂催化的交叉脱氢偶联(CDC)反应.     

丙二腈在多组分反应中的应用*

丙二腈分子中的氰基作为强吸电子基团活化亚甲基,也是良好的离去基团,以及氰基的碳氮三键可进行加成反应,使得丙二腈是一种非常特别的化合物。它具有非常丰富的反应性质,可以发生Knoevenagel缩合、Michael加成、环化和消去等反应,是进行多组分合成反应的优良试剂。由其参加的多组分合成反应已经成为合成众多碳环和杂环化合物的重要方法。本文综述了丙二腈在多组分反应中的研究进展,介绍了近年来丙二腈参加的多组分反应合成环状化合物的成功事例,展望了丙二腈反应的发展方向。     

Molisch反应:发现、原理及应用

Molisch反应发现于1886年,此后对糖和苷类化合物的研究提供了强大的定性鉴别工具.本文回顾了Molisch反应的发现过程、反应机理研究及应用,并对该反应在未来的应用进行了展望.     

生物质平台化合物电催化制备高值燃料与化学品研究进展

生物质是一类丰富的可再生碳基资源, 有望代替传统化石资源生产燃料和化学品, 受到了广泛关注和研究. 近年来, 电催化作为一种绿色高效的转化策略, 成为生物质催化转化的重要研究方向之一, 具有巨大的应用前景. 本文总结了生物质平台化合物电催化制备高附加值燃料与化学品的研究进展, 根据反应类型重点介绍了电催化氧化、 还原和偶联反应, 对催化反应过程和机理进行了阐述, 并对电催化生物炼制的前景进行了展望.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.