用钛系载体高效催化剂进行乙烯-丙烯-1-丁烯三元共聚合的研究 Ⅰ.聚合条件对共聚合反应的影响

用多组份改性钛系载体催化剂TiCl_4,Ti(OBu)_4/MgCl_2/Ethylbenzeate(EB)/φ_2SiCl_2/AlEt_3进行了乙烯-丙烯-1-丁烯三元共聚合的研究。考察了单体进料比、聚合温度,烷基铝浓度和催化剂浓度等条件对共聚合的影响。发现本催化剂对乙丙丁三元共聚合有极高的催化效率,聚合1h达8.6×10~4g共聚物/g-Ti。共聚合速率衰减符合动力学方程:R_s=R_s+(R_0—R_s)_e~(βs)。     

乙烯-丙烯共聚物磺酸盐离聚物的研究——Ⅰ.乙烯-丙烯共聚物及其氯磺化反应

本文用钛系高效催化剂合成了四种乙烯-丙烯共聚物,测定了共聚物的单体组成、序列结构分布、分子量和结晶度.在考察了引发剂和氯磺化试剂对氯磺化反应影响的基础上,制备了不同磺化度的氯磺化乙丙共聚物,并用~(13)C-NMR分析其化学结构,表明共聚物分子链上CH没有发生反应,CH_3只被-SO_2Cl取代,而CH_2可被-SO_2Cl或-Cl取代.     

乙丙共物聚的结晶速率与序列结构

本文用(体)热膨胀计法研究了共聚物组成、催化体系对乙丙共聚物结晶速率的影响。结果表明,同一催化体系乙丙共聚物的最大结晶速率(1/t_((1/2)(max)))随共聚物中乙烯含量的增加而增大。不同催化体系对二元乙丙共聚物的1/t_((1/2)(max))次序为:VOCl_3~->V_(5-9~-)>V_((aca?)3~-)。加入活化剂ETCA的各催化体系的二元乙丙共聚物的1/t_((1/2)(max))为VOCl_3~-ETCA>V_(5-9~-)ETCA>V_((ocac)~-)ETCA。结合结晶度、T_g、以及不同序列分布共聚物组成的测定,可推测VOCl_3~-体系乙丙共聚物具有较长的聚乙烯序列结构,V_(5-9~-)体系次之,V_((acac)_3~-)体系的乙丙共聚物分子链有更多的无规结构。     

水溶性聚合物和两亲聚合物:14.丙烯酰胺/2-丙烯酰胺基十六烷磺酸铵无规共聚物

水溶液中用硫酸亚铁-异丙苯过氧化氢氧化还原引发体系合成了丙烯酰胺(AM)/2-丙烯酰胺基十六烷磺酸铵(AMC_(16)SNH_4)无规共聚物。用元素分析、IR、~(13)C-NMR和~1H-NMR对其进行了表征。对水溶液性质的研究结果表明,与部分水解聚丙烯酰胺相比,这种新型共聚物有着优异的耐盐性、耐温性和贮存稳定性。     

化学法镁钛系高效载体催化剂多活性中心的DSC证据

<正> 用高效载体钛催化剂进行乙丙共聚物的合成,已有大量报道,但从聚合产物热分析出发对其催化活性中心的性质进行探讨,报道尚少。我们用化学反应法制备的高效载体钛催化剂进行乙丙共聚反应,所得产物进行热分析结果表明,共聚产物具有很宽的链段序列分布,呈现出吸热双峰模式,与催化体系及其聚合过程ESR分析,共聚物溶剂萃取及其~(13)C-NMR分析结果一起,有力地支持催化体系多活性中心的结论。     

线性低密度聚乙烯的合成研究——乙烯-1-丁烯共聚反应促进剂的作用

本文研究乙烯与1-丁烯共聚反应时,添加硅化合物、苯基氯化镁、苯乙烯等促进剂对共聚作用的影响。考察乙烯与1-丁烯共聚衰减动力学行为,并用~(13)C-NMR测定共聚物组成、竞聚率及序列分布。     

载体型钛系催化剂的丙烯与乙烯共聚合研究

以载体型钛系齐格勒-纳塔催化剂进行了丙烯和乙烯无规共聚合的研究。对聚合温度、铝钛摩尔比、给电子体浓度和加氢等行为作了考察。共聚合速度和共聚物的比浓粘度呈规律性变化。用~(13)C-NMR和DSC测定了共聚物的组成、序列分布、熔点和结晶度.结果表明,在共聚合反应速度曲线上,在丙烯和乙烯分别为10mol％组成处,出现两个最大值。随共聚物中乙烯含量增加(2—10mol％),其熔点和结晶度降低,DSC峰变低、变宽,在乙烯含量达10mol％处出现双峰(128/116℃)反映出无规共聚链出现不同的序列分布。     

聚丙烯-聚乙烯嵌段共聚物的分子结构及性能的研究

本工作用核磁共振(~(13)C-NMR)、示差扫描量热(DSC)、动态力学分析(DMA)和扫描电子显微镜(SEM)等技术研究了将丙烯、乙烯单体两步分段共聚、预期为聚丙烯-聚乙烯嵌段共聚物的合成物(简称为聚丙烯-聚乙烯嵌段共聚物或嵌段共聚物)。结果表明,在嵌段共聚物中含有一定量的、能为正庚烷抽提出来的乙丙无规共聚物(EPR);分段共聚的产物并非预想的PP-b-PE两嵌段共聚物,而是含有多种组分的共混物;形态表征的结果表明了嵌段共聚物为多相体系,EPR和PE形成分散相以球形无规分布于PP基体中。     

稀土催化丁二烯-异戊二烯共聚物的序列分布

用~(13)C-NMR方法研究了不同稀土元素聚合丁二烯-异戊二烯共聚物的序列分布。定量地求得丁-戊共聚物二元组分布及数均序列长度数据。证明以Nd、Pr及Ce为催化剂的共聚物分布较好地服从Bernoullian模型,以Y、Sm、Dy及Gd为催化剂的共聚物与Bernoullian分布有些偏离。     

d,l-聚丙交脂、l-聚丙交酯与ε-聚已内酯之间的酯交换

本文采用的两种共混方式即熔融辗压共混与去溶剂共混,在添加与不添加催化剂Ti(OBu)_4·BF_3·OEt_2两种情况下于150℃都观察到两种均聚物的明显降解。共混d,l-聚丙交酯(d,l-PLA)/ε-聚已内酯(ε-PCL)时,d,l-PLA降解速率大于ε-PCL~(13)C-NMRDSC谱图证明它们间无明显的酯交换发生;在与上述相同条件下,共混l-PLA/ε-PCL时,~(13)C-NMR及DSC谱图都证实了发生明显酯交接,生成了共聚物。共聚物的摩尔组成由~1H-NMR加以测定,由精细~(13)C-NMR谱图计算出共聚物中l-LA与ε-CL平均链段长度。DSC表征了该共聚物的结晶情况。其结果与上述二者的分析完全一致。     

13C NMR Study of Ethylene/propylene/octene-1Terpolymers Synthesized with TiCl4/MgCl2/I-Bu3Al as the Catalyst

Introduction　　 Various ethylene/ α- olefin copolymers such as LLDPE,VLDPE/ ULDPE,EPR,EPDMetc.have a wide application in polymer materials science and engineering.The properties ofthose copolymers are greatly influenced by the type,content and distributions of thecomonomer branches.The effects of different kinds of chain branches,which were derivedfrom comonomerincorporationsin themain chain of the ethylene/α- olefin copolymers on theirproperties and studied by many authors,have sh…     

以丙烯为主体的二元及三元共聚研究──丙烯与乙烯和丁烯－1的共聚合

研究了ＭｇＣｌ２载体高效催化剂用于丙烯为主体的与乙烯和丁烯－１的二元及三元共聚合反应：选择了最佳的共聚合条件；实验测定了共聚单体配比对共聚合活性、共聚物分子量和物理性能的影响；并用１３Ｃ—ＮＭＲ分析了共聚物组成、序列分布和支链结构等微观结构信息．     

Separation of ethylene‐propylene copolymers and ethylene‐propylene‐diene terpolymers using high‐temperature interactive liquid chromatography

Ethylene‐propylene‐diene terpolymers (EPDM) are generally amorphous and, therefore, do not crystallize from solution. Consequently, fractionation techniques based on crystallization, such as crystallization analysis fractionation or temperature rising elution fractionation, cannot be used to analyze their chemical composition distribution. Moreover, no suitable chromatographic system was known, which would enable to separate them according to their chemical composition. In this study, two different sorbent/solvent systems are tested with regard to the capability to separate EPDM‐terpolymers and ethylene‐propylene (EP)‐copolymers according to chemical composition. While porous graphite/1‐decanol system is selective towards ethylene and ethylidene‐2‐norbornene, carbon coated zirconia/2‐ethyl‐1‐hexanol is preferentially selective towards ethylene. Consequently, the earlier system enables to separate both EP copolymers and EPDM according to the chemical composition and the latter mainly according to the ethylene content. The results prove that the chromatographic separation in both sorbent/solvent systems is not influenced by molar mass of a sample or by its long chain branching. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Glycidyl methacrylate–tert-butyl acrylate copolymers: Synthesis,characterization, and thermal studies

Glycidyl methacrylate was copolymerized with tert-butyl acrylate in bulk at 60°C using benzoyl peroxide as free radical initiator. The copolymer composition was determined by chemical analysis as well as from ¹³C-NMR data. The monomer reactivity ratios were calculated by using the YBR method. The number average sequence length of the copolymers was determined from ¹³C-NMR data and compared with those obtained from reactivity ratios. The intrinsic viscosity of the copolymers was determined in DMF, and thermal stability as well as mechanism of thermal degradation of the copolymers were evaluated.     

Chemical Composition Distribution of Multicomponent Copolymers

The number and weight chemical composition distributions in random terpolymers were derived using a statistical approach. The solution was then generalized to comprise higher multicomponent copolymers. The analytical solution was verified with Monte Carlo simulations and by considering limiting cases. Chemical composition distributions for fractions of random terpolymers of various kinetic chain lengths were also investigated. In a similar way to the results for binary copolymers described by Stockmayer's distribution, broadening of the distribution is observed for low‐molecular‐weight chains.

Comparison of chemical composition distributions from Stockmayer (Equation ( 3 )) and statistical approach (Equation ( 4 )).     

TiCl_4/MgCl_2催化丙烯/1-辛烯共聚合研究

本文用TiCl_4/MgCl_2-Al(i-Bu)_3催化剂进行丙烯/1-辛烯共聚合,研究发现引入少量共聚单体1-辛烯时,能提高丙烯的聚合活性。30℃时,测得共聚合竟聚率为r_丙=5.63,r_辛=0.32。共聚物的结晶度和己烷不溶物含量随其1-辛烯含量的增加而迅速下降。X射线衍射及~(13)C-NMR测定结果表明,共聚物的己烷可溶部分为非结晶的无规共聚物,己烷不溶部分是具有镶嵌着半个1-辛烯单体单元的长嵌段聚丙烯链结构的结晶性共聚物。     

Quasiliving Carbocationic Polymerization. XVI. Forced Ideal Terpolymerization of Styrene-α-Methylstyrene-lsobutylene

Forced ideal carbocationic terpolymerization of styrene/α-methylstyrene/isobutylene systems has been achieved by continuous addition of mixed monomer feeds to 2-chloro-2,4,4-trimethylpentane/TiCl₄ initiator/coinitiator charges dissolved in n-hexane/methylene chloride solvent mixtures. The compositions of terpolymers were uniform and identical to those of the feeds in the concentration ranges studied. The number-average molecular weights increased monotonously with the amounts of monomers consumed; however, pronounced chain transfer to monomer was evident. The microstructure of the products was investigated ¹³C-NMR spectroscopy. According to dual detector GPC, ¹³C-NMR and DSC data true terpolymers have formed.     

Novel Copolymers of Styrene. 9. Methyl and Methoxy Ring-Substituted 2-Cyano-3-phenyl 2-propenamides

Novel electrophilic trisubstituted ethylene monomers, methyl and methoxy ring- substituted 2-cyano-3-phenyl-2-propenamides, RPhCH=C(CN)CONH₂, where R is 2,3-dimethyl, 2,4-dimethyl, 2,5-dimethyl, 2-(3-methoxyphenoxy), 2-(4-methoxyphenoxy), 3-(4-methoxyphenoxy), 4-(4-methylphenoxy), 2,3-methylenedioxy were prepared and copolymerized with styrene. The monomers were synthesized by potassium hydroxide catalyzed Knoevenagel condensation of ring-substituted benzaldehydes and cyanoacetamide, and characterized by CHN elemental analysis, IR, ¹H- and ¹³C-NMR. Novel copolymers of the ethylenes and styrene were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator, ABCN at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H- and ¹³C-NMR, GPC, DSC, and TGA. High T_g of the copolymers in comparison with that of polystyrene indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 200–500°C range with residue (5.8–33.8 wt%), which then decomposed in the 500–800°C range.     

Novel Copolymers of 2-Phenyl-1,1-dicyanoethylene with 4-Fluoro- and Pentafluorostyrene

Copolymerization of 2-phenyl-1,1-dicyanoethylene (PDE) with 4-fluorostyrene and pentafluorostyrene in solution with radical initiation (ABCN) at 70°C yielded random copolymers with PDE alternating units. The composition of the copolymers was calculated from nitrogen analysis and the structure was analyzed by IR, ¹H and ¹³C-NMR. The order of relative reactivity (1/r₁) and the tendency toward alternation of monomer units in the copolymer for these two monomers, is 4-fluorostyrene (1.96) > pentafluorostyrene (0.51). Higher glass transition temperature of the copolymers in comparison with that of homopolymers indicates a decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit.     

苯乙烯-N-苯基马来酰亚胺-马来酸酐三元共聚物的合成与性能

以过氧化对苯二甲酸二叔丁酯为引发剂, 以一次投料方式, 采用溶液聚合法合成了苯乙烯-N-苯基马来酰亚胺-马来酸酐三元共聚物. 通过控制单体配比, 实现产物中N-苯基马来酰亚胺质量分数在48%~63%之间可调. 采用FTIR, ¹H NMR, ¹³C NMR和GPC技术对三元共聚物的化学组成、链序列结构和分子量进行了测试. 利用FOX方程计算的共聚物NPMI含量与¹H NMR核磁测试结果一致. DSC和TGA测试的结果表明, 当N-苯基马来酰亚胺质量分数>48%时, 共聚物的玻璃化转变温度(T_g)从202 ℃提高到215 ℃, 5%热失重温度高于363 ℃, 所以三元聚合物是一种优异的聚合物耐热剂.