Effect of 1-butyl-3-methylimidazolium tetrafluoroborate on the formation rate of CO2 hydrate

The effect of the addition of 1-butyl-3-methylimidazolium tetrafluoroborate （[C4mim][BF4]） on the formation rates of CO2 hydrates was investigate. The isothermal and isobaric methods were used to measure the formation rates of CO2 hydrates. As compared to those of pure water, the data of phase equilibrium changed greatly. The effects of pressure, temperature, and the concentration of [C4mim][BF4] aqueous solution on the formation rates of CO2 hydrates were investigated. With a constant concentration of [C4mim][BF4], the rate of gas consumption was enhanced with the lowering of experimental temperature. However, a decrease in pressure exerted an opposite effect on the rate of gas consumption. Moreover, the addition of [C4mim][BF4] raised the equilibrium pressure of hydrate formation at the same temperature.     

咪唑基离子液体的物理化学性质估算及预测(英文)

根据经验和半经验方程及空隙模型理论,可以估算及预测离子液体在298.15K的物理化学性质.本文讨论了离子液体的分子体积,密度,标准熵,晶格能,表面张力,等张比容,摩尔蒸发焓,空隙体积,空隙率和热膨胀系数.通过实验测得的三种离子液体1-乙基-3-甲基咪唑硫酸乙酯([C2mim][EtSO4)]),1-丁基-3-甲基咪唑硫酸辛酯([C4mim][OcSO4])和1-乙基-3-甲基咪唑双三氟甲磺酰亚胺盐([C2mim][NTf2])的密度和表面张力估算了它们的其它物理化学性质.由这三种离子液体的分子体积及等张比容预测了同系列中其它离子液体[Cnmim][EtSO4],[Cnmim][OcSO4]和[Cnmim][NTf2](n=1-6)的分子体积及等张比容,由此计算出它们的密度及表面张力.进而预测了它们的物理化学性质.将预测的离子液体[C4mim][NTf2]和[C2mim][OcSO4]的密度值与文献报导的实验值进行比较,其偏差在实验误差范围内.最后,将由Kabo经验方程计算的七个离子液体[C2mim][EtSO4]、[C4mim][OcSO4]、[C2mim][NTf2]、[C4mim][NTf2]、丁基三甲基铵双三氟甲磺酰亚胺盐([N4111][NTf2])、甲基三辛基铵双三氟甲磺酰亚胺盐([N8881][NTf2])和1-辛基-3-甲基吡啶四氟硼酸盐([m3opy][BF4])的摩尔蒸发焓与由Verevkin简单规则预测的摩尔蒸发焓进行比较,发现两者符合很好.因此,在缺乏密度和表面张力实验数据的情况下,可以用Verevkin简单规则来预测离子液体的摩尔蒸发焓.     

Measurement of SO2 solubility in ionic liquids

Measurements of the solubility of sulfur dioxide (SO(2)) in the ionic liquids 1-n-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([hmim][Tf(2)N]) and 1-n-hexyl-3-methylpyridinium bis(trifluoromethylsulfonyl)imide ([hmpy][Tf(2)N]) at temperatures from 25 to 60 degrees C and pressures up to 4 bar indicate that large amounts (up to 85 mol %) of SO(2) dissolve in ionic liquids by simple physical absorption.     

Ionic liquid 1-ethyl-3-methylimidazolium acetate: an attractive solvent for native chemical ligation of peptides

The ionic liquid 1-ethyl-3-methylimidazolium acetate ([C₂mim][OAc]) was successfully used as alternative solvent for native chemical ligation of peptide fragments to produce model peptide LYRAXCRANK (X = G, A, L, N, Q, K, and F). The commonly used buffer system including thiol additives such as thiophenol and benzyl mercaptan can be replaced by the nontoxic ionic liquid [C₂mim][OAc]. In addition to improving the solubility of the peptides in [C₂mim][OAc], yields and rates of the ligation reactions were found to be efficiently enhanced.     

Raman and ab initio studies of simple and binary 1-alkyl-3-methylimidazolium ionic liquids

Raman spectra of the ionic liquids, 1-butyl-3-methylimidazolium hexafluorophosphate ([C4mim][PF6]), 1-hexyl-3-methylimidazolium chloride ([C6mim]Cl), and 1-hexyl-3-methylimidazolium hexafluorophosphate ([C6mim][PF6]), and binary mixtures thereof, have been assigned using ab initio MP2 calculations. The previously reported anti and gauche forms of the [C4mim]+ cation have been observed, and this study reveals this to be a general feature of the long-chain 1-alkyl derivatives. Analysis of mixtures of [C6mim]Cl and [C6mim][PF6] has provided information on the nature of the hydrogen bonding between the imidazolium headgroup and the anions, and the invariance of the essentially 50:50 mixture of the predominant conformers informs on the nature of glass formation in these systems.     

An effective method for enhancing metal-ions' selectivity of ionic liquid-based extraction system: Adding water-soluble complexing agent

Selective extraction-separation of yttrium(III) from heavy lanthanides into 1-octyl-3-methylimidazolium hexafluorophosphate ([C(8)mim][PF(6)]) containing Cyanex 923 was achieved by adding a water-soluble complexing agent (EDTA) to aqueous phase. The simple and environmentally benign complexing method was proved to be an effective strategy for enhancing the selectivity of [C(n)mim][PF(6)]/[Tf(2)N]-based extraction system without increasing the loss of [C(n)mim](+).     

Solubility of tetrafluoromethane in the ionic liquid [hmim][Tf2N

Experimental results for the solubility of tetrafluoromethane (CF4, R14) in the ionic liquid 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)amide ([hmim][Tf2N]) are presented for temperatures between 293.3 and 413.3 K, at pressures (gas molalities) up to 9.6 MPa (0.22 mol kg-1). The experimental results were determined with a high-pressure view-cell technique operating on the synthetic method. The experimental data were used to determine Henry's constant of tetrafluoromethane in [hmim][Tf2N]. The results for the Henry's constant (at zero pressure) are correlated (on the molality scale) within the experimental uncertainty (i.e., about 1.1%) by ln(k(0)(H,CF4)/MPa) = 7.537 - 893.8/(T/K) - 0.003977(T/K). Henry's law was also extended to describe the gas solubility at higher pressures. Furthermore, a cubic equation of state was used to correlate the gas solubility over the entire range of experimentally investigated temperature and pressure. Both methods proved suited for a reliable correlation of the new experimental data.     

Comparison of dansylated aminopropyl controlled pore glass solvated by molecular and ionic liquids

We compare how (i) four ionic liquids (ILs) (1-butyl-3-methylimidazolium tetrafluoroborate ([C4mim][BF4]), 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C4mim][Tf2N]), 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide ([C4mpy][Tf2N]), and trihexyltetradecylphosphonium bis(trifluoromethylsulfonyl)imide ([P(C6)3C14][Tf2N])) and (ii) two conventional molecular liquids (methanol and 1-octanol) solvate/wet luminescent organic moieties that are covalently attached to the surface of silica controlled pore glass (CPG). A series of aminopropyl CPG particles that have been covalently tagged with the solvatochromic fluorescent probe group dansyl were used in this study. The results demonstrate that ILs solvate/wet the silica surface differently in comparison to molecular liquids (MLs). Specifically, when comparing ILs and MLs that appear to solvate the free probe, dansylpropylsulfonamide (DPSA), equally in solution, we find that ILs do not solvate/wet the silica surfaces as well as the corresponding MLs. The cation component in these ILs is the significant factor in how the ILs solvate/wet silica surfaces. Solvation/wetting of surface-bound species at a silica surface depends on the cation size. Chlorosilane end-capping of the surface silanol and amine residues attenuates the cation's affects.     

An electrochemical study of the oxidation of hydrogen at platinum electrodes in several room temperature ionic liquids

The electrochemical oxidation of dissolved hydrogen gas has been studied in a range of room-temperature ionic liquids (RTILs), namely [C(2)mim][NTf(2)], [C(4)mim][NTf(2)], [N(6,2,2,2)][NTf(2)], [P(14,6,6,6)][NTf(2)], [C(4)mpyrr][NTf(2)], [C(4)mim][BF(4)], [C(4)mim][PF(6)], [C(4)mim][OTf], and [C(6)mim]Cl on a platinum microdisk electrode of diameter 10 microm. In all cases, except [C(6)mim]Cl, a broad quasi-electrochemically reversible oxidation peak between 0.3 to 1.3 V vs Ag was seen prior to electrode activation ([C(6)mim]Cl showed an almost irreversible wave). When the electrode was pre-anodized ("activated") at 2.0 V vs Ag for 1 min, the peak separations became smaller, and the peak shape became more electrochemically reversible. It is thought that the electrogenerated protons chemically combine with the anions (A-) of the RTIL. The appearance and position of the reverse (reduction) peak on the voltammograms is thought to depend on three factors: (1) the stability of the protonated anion, HA, (2) the position of equilibrium of the protonation reaction HA<==> H+ + A- , and (3) any follow-up chemistry, e.g., dissociation or reaction of the protonated anion, HA. This is discussed for the five different anions studied. The reduction of HNTf(2) was also studied in two [NTf(2)]- -based RTILs and was compared to the oxidation waves from hydrogen. The results have implications for the defining of pKa in RTIL media, for the development of suitable reference electrodes for use in RTILs, and in the possible amperometric sensing of H2 gas.     

Water-clustering in hygroscopic ionic liquids-an implicit solvent analysis

Most ionic liquids are known to be hygroscopic to varying degrees, and that can be detrimental or useful depending upon the application in question. Water can accumulate slowly over hours or days to saturation levels corresponding to the humidity level. When designing or deploying a new ionic liquid it is important to be able to estimate its maximum moisture absorbing ability at the temperature and pressure of its operation. With this goal in mind we have carried out computational studies on three ionic liquid systems based on [BF(4)](-), [PF(6)](-), and [Tf(2)N](-) anions and 1-alkyl-3-methyl-imidazolium ([C(n)mim](+)) cations within an implicit solvent formalism. For highly hygroscopic systems like [C(n)mim][BF(4)] we find that non-iterative calculations with single water molecules can lead to significant underestimation of the maximum moisture content, while iterative calculations can result in miscibility behavior qualitatively different from experimental observations. On the other hand, the inclusion of small hydrogen-bonded water-clusters up to an appropriately chosen size is shown to yield better quantitative agreements with experimentally observed water uptake. Additionally, such calculations appear consistent with a number of thermodynamically interesting phase behaviors, including limited-solubility to full-miscibility transitions as a function of temperature and as a function of the alkyl chain length of the imidazolium cation. For hydrophobic systems like [C(n)mim][PF(6)] and [C(n)mim][Tf(2)N] the computed solubility (for each n) is found to have a smooth convergence behavior as a function of the largest cluster-size considered with the results for the larger clusters being close to that obtained by iterative calculations with single water molecules.     

Solvation of carbohydrates in n,n'-dialkylimidazolium ionic liquids: a multinuclear NMR spectroscopy study

The solvation of carbohydrates in N, N'-dialkylimidazolium ionic liquids (ILs) was investigated by means of 13C and 35/37Cl NMR relaxation and 1H pulsed field gradient stimulated echo (PFG-STE) diffusion measurements. Solutions of model sugars in 1- n-butyl-3-methylimidazolium chloride ([C4mim]Cl), 1-allyl-3-methylimidazolium chloride ([CC2mim]Cl), and 1-ethyl-3-methylimidazolium acetate ([C2mim][OAc]) were studied to evaluate the effects of cation and anion structure on the solvation mechanism. In all cases, the changes in the relaxation times of carbon nuclei of the IL cations as a function of carbohydrate concentration are small and consistent with the variation in solution viscosities. Conversely, the 35/37Cl and 13C relaxation rates of chloride ions and acetate ion carbons, respectively, have a strong dependency on sugar content. For [C2mim][OAc], the correlation times estimated from 13C relaxation data for both ions reveal that, as the carbohydrate concentration increases, the reorientation rate of the anion decreases faster than that of the cation. Although not as marked as the variations observed in the relaxation data, similar trends were obtained from the analysis of cation and, in the case of [C2mim][OAc], anion self-diffusion coefficients of the sugar/IL systems. Our results show that the interactions between the IL cation and the solutes are nonspecific, confirm that the process is governed by the interactions between the IL anion and the carbohydrate, and, more importantly, indicate no change in the solvation mechanism regardless of the structure of the anion.     

A metallacage encapsulating chloride as a probe for a solvation scale in ionic liquids

With the purpose of assessing the reactivity of chloride ions dissolved in ionic liquids (ILs), a relative scale for the solvation of chloride is given for a series of ILs based on the bis(trifluoromethane)sulfonimide ([Tf(2)N]) anion and different cations, 1-butyl-3-methylimidazolium ([bmim]), 1-butyl-2,3-dimethylimidazolium ([bdmim]), 1-butyl-1-methylpyrrolidinium ([bmpy]), 1-butylpyridinium ([bpy]), 1-pentyl-1,1,1-triethylammonium ([C(5)e(3)am]), and 1-(2-hydroxy)ethyl-3-methylimidazolium ([mimeOH]). Insights into the solvation of chloride are achieved by the thermodynamic study of the reaction of dissociation of a chloride-templated nickel(II) metallacage performed at various temperatures by UV-visible spectroscopy in each IL. The order of chloride solvation [C(5)e(3)am][Tf(2)N] < [bmpy][Tf(2)N] < [bmim][Tf(2)N] 相似文献   

Chemical potentials in aqueous solutions of some ionic liquids with the 1-ethyl-3-methylimidazolium cation

We determined the vapor pressures of aqueous solutions of 1-ethyl-3-methylimidazolium ([C 2mim])-based ionic liquids (IL) with counteranions, tetrafluoroborate (BF 4 (-)), trifluoromethanesulfonate (OTF (-)), and iodide (I (-)). Because in literature the evidence is accumulating and pointing to the fact that ionic liquid ions do not dissociate in aqueous media for the most of the concentration range, we analyzed the vapor pressure data on the basis of binary mixture, and the excess chemical potentials of each component were calculated. From these, the intermolecular interactions in terms of excess chemical potential and hence the concentration fluctuations were evaluated. Though any further discussion into the mixing schemes of the mixture awaits the excess partial molar enthalpy and hence the excess partial molar entropy data, the net interaction in terms of excess chemical potential indicates that the affinity of each IL is ranked in the descending order [C 2mim]I > [C 2mim]OTF > [C 2mim]BF 4. This is consistent with our earlier findings that [C 2mim] (+) is modestly amphiphilic with almost equal hydrophobicity and hydrophilicity, I (-) is a hydrophile, and OTF (-) is amphiphilic, and BF 4 (-) is believed to be strongly hydrophobic.     

双功能离子液体的合成及二氧化碳捕集性能

采用两步法合成了新型功能化离子液体1-甲氧基乙基-3-甲基咪唑甘氨酸([C_3O_1mim][Gly]),并研究了其对CO_2的吸收性能.利用核磁共振、红外光谱及热重分析等手段进行表征,验证了该离子液体的结构,且发现其具有较高的热稳定性.对比单乙醇胺(MEA),考察了[C_3O_1mim][Gly]在不同温度下对CO_2的捕集能力,结果表明,[C_3O_1mim][Gly]在40℃下的吸收容量可达1.26 mol CO_2/mol IL,远高于MEA,这表明[C_3O_1mim][Gly]对CO_2具有良好的吸收能力,吸收容量随着温度升高而降低.该离子液体同时具有良好的循环稳定性,进行5次吸收解吸操作后仍可保持较高的CO_2吸收量.对该离子液体吸收CO_2进行了动力学研究,结果表明,Pseudo-second-order模型能够较好地描述该吸收过程.     

The glass transition and the distribution of voids in room-temperature ionic liquids: a molecular dynamics study

The glass transition in prototypical room temperature ionic liquids has been investigated by molecular dynamics simulations based on an Amber-like empirical force field. Samples of [C(4)mim][PF(6)], [C(4)mim][Tf(2)N], and [C(3)mim][Tf(2)N] have been quenched from the liquid phase at T = 500 to a glassy state at T ～ 0 K in discontinuous steps of 20 K every 1.2 ns. The glass temperature estimated by simulation (T(g) = 209 K for [C(4)mim][PF(6)], T(g) = 204 K for [C(4)mim][Tf(2)N], and T(g) = 196 K for [C(3)mim][Tf(2)N]) agrees semi-quantitatively with the experimental values (T(g) = 193÷196 K for [C(4)mim][PF(6)], T(g) = 186÷189 K for [C(4)mim][Tf(2)N], and T(g) = 183 K for [C(3)mim][Tf(2)N]). A model electron density is introduced to identify voids in the system. The temperature dependence of the size distribution of voids provided by simulation reproduce well the experimental results of positron annihilation lifetime spectroscopy reported in G. Dlubek, Y. Yu, R. Krause-Rehberg, W. Beichel, S. Bulut, N. Pogodina, I. Krossing, and Ch. Friedrich, J. Chem. Phys. 133, 124502 (2010), with only one free parameter needed to fit the experimental data.     

Growth of sputter-deposited gold nanoparticles in ionic liquids

The growth of gold nanoparticles (NPs) synthesized by sputter deposition on an ionic liquid surface is studied in situ in the bulk phase of the ionic liquids (ILs) 1-butyl-3-methylimidazolium dicyanamide [C(1)C(4)Im][N(CN)(2)], 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)amide [C(1)C(4)Im][Tf(2)N], 1-butyl-3-methylimidazolium tetrafluoroborate [C(1)C(4)Im][BF(4)], 1-butyl-3-methylimidazolium hexafluorophosphate [C(1)C(4)Im][PF(6)] and 1-butyl-3-methylimidazolium triflate [C(1)C(4)Im][TfO]. It is found that primary nanoparticles with a diameter smaller than 2.5 nm are present in the sample immediately after sputtering. Growth of these primary particles proceeds after the end of the sputtering process and stops when the nanoparticles reach a certain size. Depending on the viscosity of the ionic liquid this growth process can proceed several hours to several days. The growth speed is fastest for the least viscous ionic liquid and follows the trend [C(1)C(4)Im][N(CN)(2)] > [C(1)C(4)Im][Tf(2)N] > [C(1)C(4)Im][TfO] > [C(1)C(4)Im][BF(4)] > [C(1)C(4)Im][PF(6)]. It is also found that a higher concentration of sputtered gold results in faster growth of the gold nanoparticles. A discussion on the growth mechanism of sputtered gold NPs is included.     

Colloidal stability of bare and polymer-grafted silica nanoparticles in ionic liquids

The colloidal stability of bare and poly(methyl methacrylate) (PMMA)-grafted silica nanoparticles was studied in 1-alkyl-3-methylimidazolium ([C(n)mim])-based ionic liquids (ILs) with different anionic structures. The theoretical estimation of the colloidal interaction between monodispersed bare silica particles by using the Derjaguin-Landau-Verwey-Overbeek theory indicates that bare silica particles cannot be stabilized and they rapidly form aggregates in all the ILs used in this study. The instability of bare silica particles was experimentally confirmed by dynamic light scattering measurement and in situ transmission electron microscopy observations by utilizing the negligible vapor pressure of ILs. This evidence suggests that electrostatic stabilization is inefficient in ILs because of the high ionic atmosphere and the resulting surface-charge screening. The PMMA-grafted silica particles exhibited long-term colloidal stability in [C(4)mim][PF(6)] and [C(n)mim][NTf(2)], which are compatible with the grafted PMMA. On the other hand, the PMMA-grafted particles could not be stabilized in [C 4mim][BF 4] due to the poor solubility of the grafted PMMA in the IL. Effective steric stabilization is important for obtaining stable colloidal particles in ILs.     

Intramolecular electron transfer within a covalent, fixed-distance donor-acceptor molecule in an ionic liquid

Intramolecular photoinduced charge separation and recombination within the donor-acceptor molecule 4-(N-pyrrolidino)naphthalene-1,8-imide-pyromellitimide, 5ANI-PI, are studied using ultrafast transient absorption spectroscopy in the room-temperature ionic liquid, 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)amide [EMIM][Tf2N]. The rate constants of both photoinduced charge separation and charge recombination for 5ANI-PI in [EMIM][Tf2N] are comparable to those observed in pyridine, which has a static dielectric constant similar to that of [EMIM][Tf2N] but a viscosity that is nearly 2 orders of magnitude lower than that of [EMIM][Tf2N]. The electron-transfer dynamics of 5ANI-PI in [EMIM][Tf2N] are compared to those in pyridine as a function of temperature and are discussed in the context of recently reported ionic liquid solvation studies.     

Non-classical diffusion in ionic liquids

In this study the diffusion coefficient of neutral and cationic ferrocenyl-derivatives have been characterised in a range of 1-alkyl-3-methylimidazolium ionic liquids of the general form [C(n)C(1)Im](+)[X](-). The electrochemistry of ferrocene, 1-ferrocenylmethylimidazole (FcC(1)Im), 1-ferrocenylmethylimidazolium bis(trifluoromethanesulfonyl)imide ([FcC(1)C(1)Im][Tf(2)N]) and N,N,N,N-trimethylferrocenyl-methylammonium bis(trifluoromethanesulfonyl)imide ([FcC(1)NMe(3)][Tf(2)N]), in 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([C(2)C(1)Im][Tf(2)N]) was investigated. It was shown that the diffusion coefficients of each were not significantly affected by the presence and location of a positive charge on the ferrocenyl-derivative, suggesting that coulombic solvent-solute interactions did not hinder motion of these species in ionic liquids. The diffusion coefficients for [FcC(1)C(1)Im][Tf(2)N] in five [C(n)C(1)Im][X] ionic liquids were determined as a function of temperature and the data shown to disobey the Stokes-Einstein equation. This observation is consistent with the fact that ionic liquids are glass formers, systems in which non-Stokesian behaviour is well documented. Measured diffusion coefficient data was used to determine correlation length in the ionic liquid and was found to correlate with the average size of holes, or voids, within the ionic liquid. This interpretation suggests that a model by which a migrating species can jump between voids or holes within the liquid is highly appropriate and is consistent with the observed behaviour measured across a range of temperatures.