Suspension polymerization of poly(ethylene glycol) methacrylate: a route for swellable spherical gel beads with controlled hydrophilicity and functionality

 Spherical and swellable gel beads were obtained by the suspension polymerization of poly(ethylene glycol) methacrylate macromonomer (PEG-MA). The average size and size distribution properties, the equilibrium swelling behaviour and the protein adsorption characteristics of PEG-MA-based gel beads were determined. In the suspension polymerization system, the organic phase including monomer, cross-linker and diluent solution was dispersed in an aqueous medium by using poly(vinylpyrrolidone) as the stabilizer. The diluent solution was prepared by mixing cyclohexanol and octanol at different volume ratios. The suspension polymerization experiments were designed in two separate parts. In the first part, ethylene glycol dimethacrylate was selected as the cross-linker and swellable PEG-MA-based gel beads were obtained by changing the cross-linker concentration, the monomer/diluent ratio and the stirring rate. In the second part, a more hydrophobic structure, divinylbenzene (DVB) was tried as a cross-linker. In this part, PEG-MA-DVB copolymer beads were obtained by changing the DVB/PEG-MA feed ratio. Then, the hydrophicility of the resulting gel beads could be controlled by changing the feed ratio of hydrophilic macromonomer to hydrophobic cross-linker. This property was also used to control the extent of nonspecific protein adsorption onto the surface of the gel beads. The non specific albumin adsorption onto the gel beads decreased with increasing PEG-MA content. No significant nonspecific adsorption at the isoelectric point of albumin was detected onto the gel beads produced with the higher PEG-MA/DVB feed ratios. For specific albumin adsorption, a triazinyl dye (i.e., cibacron blue, CB F3G-A) was covalently attached onto the surface of the copolymer beads via terminal hydroxyl groups of PEG-MA. The results of albumin adsorption experiments with the CB F3G-A carrying beads indicated that an appreciable specific albumin adsorption capacity could be obtained with the gel beads produced with a PEG-MA/DVB feed ratio of 1.5/4.0. Received: 16 August 1999/Revised: 27 December 1999     

In-situ grafting hydrophilic polymer on chitosan modified poly(dimethylsiloxane) microchip for separation of biomolecules

In this paper, a simple and green modification method is developed for biomolecules analysis on poly(dimethylsiloxane) (PDMS) microchip with successful depression of nonspecific biomolecules adsorption. O-[(N-succinimdyl)succiny]-o'-methyl-poly(ethylene glycol) was explored to form hydrophilic surface via in-situ grafting onto pre-coated chitosan (Chit) from aqueous solution in the PDMS microchannel. The polysaccharide chains backbone of Chit was strongly attracted onto the surface of PDMS via hydrophobic interaction combined with hydrogen bonding in an alkaline medium. The methyl-poly(ethylene glycol) (mPEG) could produce hydrophilic domains on the mPEG/aqueous interface, which generated brush-like coating in this way and revealed perfect resistance to nonspecific adsorption of biomolecules. This strategy could greatly improve separation efficiency and reproducibility of biomolecules. Amino acids and proteins could be efficiently separated and successfully detected on the coated microchip coupled with end-channel amperometric detection at a copper electrode. In addition, it offered an effective means for preparing biocompatible and hydrophilic surface on microfluidic devices, which may have potential use in the biological analysis.     

Mechanism of Immobilization of Enzymes by Radiation-Induced Polymerization of Glass-Forming Monomers

Immobilization of enzymes by radiation-induced polymerization has been studied at low temperatures by use of various hydrophilic and hydrophobic glass-forming monomers such as hydroxy-alkyl methacrylate and poly(ethylene glycol diacrylate). Activity yield of the immobilized enzyme depends on the monomer concentration in polymerization. In the immobilized enzymes with strongly hydrophobic matrices, the activity shows a maximum at an optimum monomer concentrations in a certain stage of repeated usage for the enzyme reaction. The decrease of activity with repeated use is very little in strongly hydrophobic systems, particularly in diethylene glycol diacrylate polymer matrices. The hydrophobic polymer-enzyme composite has the microsphere form. In the present method, a model scheme for immobilization mechanism is proposed, which is compared with that formed in the polymerization of a nonglass-forming monomer system and also by the solution polymerization at higher temperatures.     

PEGDA/HEMA水凝胶等离子体表面改性的研究

采用紫外光聚合法合成了聚乙二醇双丙烯酸酯(PEGDA)/甲基丙烯酸-2-羟基乙酯(HEMA)复合凝胶,在不同的条件下进行等离子处理后,紫外光下进行表面接枝改性。在凝胶表面引入亲水性基团,改善材料的亲水性。研究了不同等离子体处理条件及辐射条件对丙烯酰胺(AAm)接枝率的影响。研究表明,丙烯酰胺接枝率随着等离子体处理时间的增加先增大后减小,随着紫外光照射时间、丙烯酰胺浓度的增大而增大。     

Poly(ethylene glycol)‐based amphiphilic model conetworks: Synthesis by RAFT polymerization and characterization

Poly(ethylene glycol) (PEG)‐containing quasi‐model amphiphilic polymer conetworks (APCNs) were prepared by reversible addition fragmentation chain transfer (RAFT) polymerization using α,ω‐bis(2‐cyanoprop‐2‐yl dithiobenzoate)‐PEG as a bifunctional RAFT macrochain transfer agent (macro‐CTA) and stepwise additions of a hydrophobic monomer and a crosslinker (crosslinker: macro‐CTA = 10:1, reaction time 24 h). Three different types of monomers, methyl methacrylate (MMA), n‐butyl acrylate and styrene, were employed as the hydrophobic monomers, whereas ethylene glycol dimethacrylate, ethylene glycol diacrylate and 1,4‐divinylbenzene served as the respective crosslinkers. PEG homopolymer hydrophilic quasi‐model networks were also prepared by RAFT‐polymerizing the three crosslinkers directly onto the two active ends of the PEG‐based macro‐CTA. From the three ABA triblock copolymers prepared, the MMA‐containing one was obtained at the highest polymerization yields. The crosslinking yields of the three ABA triblock copolymers with the corresponding crosslinkers were higher than those of the PEG‐based macro‐CTA with the same crosslinkers. The degrees of swelling (DSs) of all conetworks were measured in water and in tetrahydrofuran (THF). The DSs of the APCNs in THF were higher than those in water, whereas the reverse was true for the DSs of the hydrophilic homopolymer networks. Finally, the aqueous DSs of the APCNs were lower than those of the corresponding hydrophilic homopolymer networks. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7556–7565, 2008     

Synthesis of double hydrophilic graft copolymer containing poly(ethylene glycol) and poly(methacrylic acid) side chains via successive ATRP

A well‐defined double hydrophilic graft copolymer, with polyacrylate as backbone, hydrophilic poly(ethylene glycol) and poly(methacrylic acid) as side chains, was synthesized via successive atom transfer radical polymerization followed by the selective hydrolysis of poly(methoxymethyl methacrylate) side chains. The grafting‐through strategy was first used to prepare poly[poly(ethylene glycol) methyl ether acrylate] comb copolymer. The obtained comb copolymer was transformed into macroinitiator by reacting with lithium diisopropylamine and 2‐bromopropionyl chloride. Afterwards, grafting‐from route was employed for the synthesis of poly[poly(ethylene glycol) methyl ether acrylate]‐g‐poly(methoxymethyl methacrylate) amphiphilic graft copolymer. The molecular weight distribution of this amphiphilic graft copolymer was narrow. Poly(methoxymethyl methacrylate) side chains were connected to polyacrylate backbone through stable C? C bonds instead of ester connections. The final product, poly[poly(ethylene glycol) methyl ether acrylate]‐g‐poly(methacrylate acid), was obtained by selective hydrolysis of poly(methoxymethyl methacrylate) side chains under mild conditions without affecting the polyacrylate backbone. This double hydrophilic graft copolymer was found be stimuli‐responsive to pH and ionic strength. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4056–4069, 2008     

用于输送siRNA的聚乙烯亚胺-聚乙二醇二丙烯酸酯纳米凝胶

阐述了一种新的用于输送小干扰核糖核酸(siRNA)的聚乙烯亚胺-聚乙二醇二丙烯酸酯纳米凝胶的合成及其表征.在反相微乳液体系中,聚乙烯亚胺(PEI)和聚乙二醇二丙烯酸酯(PEG-DA)通过麦克尔加成交联得到纳米凝胶.1H-NMR和FTIR的结果充分证明纳米凝胶的化学结构,而动态光散射则表明纳米凝胶的颗粒粒径均匀,约为180 nm,zeta电位为37.9 mV.同时,MTT结果表明纳米凝胶在高达1 mg/mL的浓度下对MCF-7细胞也基本没有毒性.凝胶阻滞实验证明纳米凝胶在体外可以通过静电相互作用稳定结合siRNA.转染实验结果表明纳米凝胶与GFP siRNA的复合物能降低MCF-7 KMRV细胞(一种能稳定表达GFP蛋白的MCF-7细胞系)GFP蛋白的表达.以上结果证明这种生物相容性的纳米凝胶可以结合并输送siRNA进入细胞,沉默相关基因的表达.     

The effect of crosslinked networks with poly(ethylene glycol) on sulfonated polyimide for polymer electrolyte membrane fuel cell

To investigate the effect of crosslinking by a hydrophilic group on a sulfonated polyimide electrolyte membrane, sulfonated polyimide end‐capped with maleic anhydride was synthesized using 1,4,5,8‐naphthalenetetracarboxylic dianhydride, 4,4′‐diaminobiphenyl, 2,2′‐disulfonic acid, 2‐bis [4‐(4‐aminophenoxy)phenyl] hexafluropropane and maleic anhydride. The sulfonated polyimides end‐capped with maleic anhydride were self‐crosslinked or crosslinked with poly(ethylene glycol) diacrylate. A series of the crosslinked sulfonated polyimides having various ratios of sulfonated polyimide and poly(ethylene glycol) diacrylate were prepared and compared with uncrosslinked and self‐crosslinked sulfonated polyimides. The synthesized sulfonated polyimide films were characterized for FTIR spectrum, thermal stability, ion exchange capacity, water uptake, hydrolytic stability, morphological structure, and proton conductivity. The formation of sulfonated polyimide was confirmed in FTIR spectrum. Thermal stability was good for all the sulfonated polyimides that exhibited a three‐step degradation pattern. Ion exchange capacity was the same for both the uncrosslinked and the self‐crosslinked sulfonated polyimides (1.30 mEq/g). When the crosslinked sulfonated polyimides with poly(ethylene glycol) were compared, the ion exchange capacity was decreased as 1.27 > 1.25 > 1.23 mEq/g and water uptake was increased as 23.8 < 24.0 < 24.3% with the increase in poly(ethylene glycol) diacrylate content. All the crosslinked sulfonated polyimides with poly(ethylene glycol) diacrylate were stable for over 200 h at 80 °C in deionized water. Morphological structure and mean intermolecular distance were obtained by WAXD. Proton conductivities were measured at 30, 50, 70, and 90 °C. The proton conductivity of the crosslinked sulfonated polyimides with poly(ethylene glycol) diacrylate increased with the increase in poly(ethylene glycol) diacrylate content despite the fact that the ion exchange capacity was decreased. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1455–1464, 2005     

Multilayer transfer printing on microreservoir-patterned substrate employing hydrophilic composite mold for selective immobilization of biomolecules

In this study, we introduce a hydrophilic composite mold with elasticity and moderate water permeability, suitable for transferring water-soluble polar molecules such as polyelectrolyte multilayer. This composite mold is constructed from two UV-curable polymers-Norland Optical Adhesives (NOA) 63, a urethane-related polymer, and poly(ethylene glycol) diacrylate (PEGDA). The mixture of inherently hard NOA 63 and hydrogel precursor, PEGDA, resulted in an optically transparent mold with some degree of elasticity and enhanced water permeability upon UV polymerization. Employing the NOA 63-PEGDA composite mold, a polyelectrolyte multilayer comprising alternate thin layers of poly(acrylic acid) (PAA) and poly(acrylamide) (PAAm) was transfer-printed onto arrays of microreservoir-patterned substrate to selectively prevent unwanted adsorption of biomolecules on the protruding surface. Antibody was immobilized selectively inside the microreservoirs where multilayer was not transferred, and a specific antibody binding reaction was detected inside the microreservoirs. Furthermore, the potential of this composite mold as a convenient tool for constructing a biosensor for detecting Escherichia coli (E. coli) O157:H7 was explored.     

Binding of salivary proteins and oral bacteria to hydrophobic and hydrophilic surfaces in vivo and in vitro

Chemical modifications of mineral surfaces were performed in order to gain insight into what surface properties are decisive of the accumulation of dental plaque. A non-charged, hydrophilic surface was made by two consecutive plasma polymerizations, firstly with allyl alcohol, secondly with acrylic acid, followed by adsorption of a poly(ethylene glycol)-poly(ethylene imine) adduct. A strongly hydrophobic surface was obtained by plasma polymerization of hexamethyldisiloxane. Ellipsometry was used to monitor protein interaction with the surfaces. The hydrophilic surface gave very little adsorption of both a model protein, IgG, and of saliva proteins. The hydrophobic surface, on the other hand, adsorbed high amounts of both types of proteins. In vitro adhesion of an oral bacterium,S. mutans, as well as in vivo studies, gave the opposite result, the hydrophobic surface giving less adhesion and less plaque accumulation than the hydrophilic surface. A tentative explanation of this behavior is that the saliva proteins that bind to the hydrophobic surface adsorb in an unnatural conformation which does not favor bacteria adherence.     

Surface modification of polydimethylsiloxane with photo-grafted poly(ethylene glycol) for micropatterned protein adsorption and cell adhesion

In this study, we applied photo-induced graft polymerization to micropatterned surface modification of polydimethylsiloxane (PDMS) with poly(ethylene glycol). Two types of monomers, polyethylene glycol monoacrylate (PEGMA) and polyethylene glycol diacrylate (PEGDA), were tested for surface modification of PDMS. Changes in the surface hydrophilicity and surface element composition were characterized by contact angle measurement and electron spectroscopy for chemical analysis. The PEGMA-grafted PDMS surfaces gradually lost their hydrophilicity within two weeks. In contrast, the PEGDA-grafted PDMS surface maintained stable hydrophilic characteristics for more than two months. Micropatterned protein adsorption and micropatterned cell adhesion were successfully demonstrated using PEGDA-micropatterned PDMS surfaces, which were prepared by photo-induced graft polymerization using photomasks. The PEGDA-grafted PDMS exhibited useful characteristics for microfluidic devices (e.g. hydrophilicity, low protein adsorption, and low cell attachment). The technique presented in this study will be useful for surface modification of various research tools and devices.     

Synthesis and characterization of nanoporous polycaprolactone membranes via thermally- and nonsolvent-induced phase separations for biomedical device application

A family of crosslinked poly(ethylene glycol) diacrylate (XLPEGDA) materials was synthesized via free-radical photopolymerization of poly(ethylene glycol) diacrylate (PEGDA) solutions in water. These materials are potential fouling-resistant coatings for ultrafiltration (UF) membranes. PEGDA chain length (n = 10–45, where n is the average number of ethylene oxide units in the PEGDA molecule) and water content in the prepolymerization mixture (0–80 wt.%) were varied, resulting in XLPEGDA materials with water permeability values ranging from 0.5 to 150 L μm/(m² h bar). Generally, water permeability increased with increasing prepolymerization water content and with increasing PEGDA chain length. Moreover, water permeability exhibits a strong correlation with equilibrium water uptake. However, solute rejection, probed using poly(ethylene glycol)s of well defined molar mass, decreased with increasing prepolymerization water content and increasing PEGDA chain length. That is, there is a tradeoff between water permeability and separation properties. Finally, the fouling resistance of XLPEGDA materials was characterized via contact angle measurements and static protein adhesion experiments. From these results, XLPEGDA surfaces are more hydrophilic in samples prepared at higher prepolymerization water content or with longer PEGDA chains, and the more hydrophilic surfaces generally exhibit less BSA accumulation.     

Hydrophilic silicone hydrogels with interpenetrating network structure for extended delivery of ophthalmic drugs

In the current work, hydrophilic silicone hydrogels were prepared for extended drug delivery applications. The preparation method was based on sequential interpenetrating network synthesis. A hydrophilic network was prepared by radical copolymerization of hydrophilic monomers 2‐hydroxyethyl methacrylate and poly(ethylene glycol) diacrylate. A hydrophobic silicone network was obtained by crosslinking polymerization of bifunctional methacrylated polydimethylsiloxanes macromonomer. The morphology of the silicone hydrogels was characterized by transmission electron microscopy. The result showed that the silicone hydrogels exhibited heterogeneous morphology. The properties of the silicone hydrogels such as equilibrium swelling ratio (ESR), mechanical property, oxygen permeability, contact angle, and protein repelling ability were investigated. Finally, the silicone hydrogels were loaded with timolol by pre‐soaking in drug solution to evaluate drug‐loading capacity and in vitro release behavior. The results showed that mechanical strength and oxygen permeability increased, and the ESR decreased with the increase of silicone component in the silicone hydrogels. The result of the contact angle measurement indicated that the silicone hydrogels possessed hydrophilic surfaces. The drug loading and in vitro releases were dependent on the composition of hydrophilic/hydrophobic phase of silicone hydrogels. Copyright © 2011 John Wiley & Sons, Ltd.     

The Effect of Hydrophile Topology in RAFT‐Mediated Polymerization‐Induced Self‐Assembly

Polymerization‐induced self‐assembly (PISA) was employed to compare the self‐assembly of different amphiphilic block copolymers. They were obtained by emulsion polymerization of styrene in water using hydrophilic poly(N‐acryloylmorpholine) (PNAM)‐based macromolecular RAFT agents with different structures. An average of three poly (ethylene glycol acrylate) (PEGA) units were introduced either at the beginning, statistically, or at the end of a PNAM backbone, resulting in formation of nanometric vesicles and spheres from the two former macroRAFT architectures, and large vesicles from the latter. Compared to the spheres obtained with a pure PNAM macroRAFT agent, composite macroRAFT architectures promoted a dramatic morphological change. The change was induced by the presence of PEGA hydrophilic side‐chains close to the hydrophobic polystyrene segment.     

Poly(vinylphosphonate)s functionalized polymer microspheres via rare earth metal‐mediated group transfer polymerization

We demonstrate a facile, yet efficient method for the functionalization of crosslinked polystyrene (PS) microspheres with biocompatible poly(vinylphosphonate)s via the combination of a UV grafting polymerization and a surface‐initiated group transfer polymerization. Self‐initiated photografting and photopolymerization of ethylene glycol dimethacrylate results in direct photografting of poly(ethylene glycol dimethacrylate) on the PS microspheres with dangling methacrylate functionalities, which are used to immobilize ytterbocene complexes to form the surface‐bound rare‐earth metal catalyst system. The surface‐initiated GTP of dialkyl vinylphosphonates from the initiator system leads to the functionalization of PS microspheres with poly(vinylphosphonate) brushes. Polymerization kinetic investigation indicates that surface‐initiated GTP leads to a constant and remarkably rapid weight gain of the microsphere (a microsphere weight increase of 600% within 3 min), owing to the highly living and efficient character of GTP. The surface‐initiated GTP occurring inside the microsphere causes an accumulation of the tension between the polymer chains in the microsphere, which eventually induces fracture of the microsphere for longer polymerization time. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2919–2925     

Synthesis of well‐defined pH‐responsive PPEGMEA‐g‐P2VP double hydrophilic graft copolymer via sequential SET‐LRP and ATRP

A series of well‐defined double hydrophilic graft copolymers containing poly(poly(ethylene glycol) methyl ether acrylate) (PPEGMEA) backbone and poly(2‐vinylpyridine) (P2VP) side chains were synthesized by successive single electron transfer living radical polymerization (SET‐LRP) and atom transfer radical polymerization (ATRP). The backbone was first prepared by SET‐LRP of poly(ethylene glycol) methyl ether acrylate (PEGMEA) macromonomer using CuBr/tris(2‐(dimethylamino)ethyl)amine as catalytic system. The obtained homopolymer then reacted with lithium diisopropylamide and 2‐chloropropionyl chloride at ?78 °C to afford PPEGMEA‐Cl macroinitiator. poly(poly(ethylene glycol) methyl ether acrylate)‐g‐poly(2‐vinylpyridine) double hydrophilic graft copolymers were finally synthesized by. ATRP of 2‐vinylpyridine initiated by PPEGMEA‐Cl macroinitiator at 25 °C using CuCl/hexamethyldiethylenetriamine as catalytic system via the grafting‐ from strategy. The molecular weights of both the backbone and the side chains were controllable and the molecular weight distributions kept relatively narrow (M_w/M_n ≤ 1.40). pH‐Responsive micellization behavior was investigated by ¹H NMR, dynamic light scattering, and transmission electron microscopy and this kind of double hydrophilic graft copolymer aggregated to form micelles with P2VP‐core while pH of the aqueous solution was above 5.0. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Amphiphilic hydrogel nanoparticles. Preparation, characterization, and preliminary assessment as new colloidal drug carriers

Inverse emulsion photopolymerization of acrylated poly(ethylene glycol)-bl-poly(propylene glycol)-bl-poly(ethylene glycol) and poly(ethylene glycol) was successfully employed to prepare stable, cross-linked, amphiphilic nanoparticles. Even at low emulsifier concentrations (2%) and high water-to-hexane weight ratios (35/65), the stability of the inverse emulsion allowed for the formation of well-defined colloidal material. Inverse emulsion characteristics and polymerization conditions could be controlled to vary the size of the nanoparticles between 50 and 500 nm. The presence of hydrophobic nanodomains within these otherwise hydrophilic nanoparticles was verified by using pyrene as a microenvironmentally sensitive probe. The hydrophobic poly(propylene glycol)-rich domains appear to be suitable for incorporation of hydrophobic drugs, encapsulating Doxorubicin up to 9.8% (w/w). We believe that the complex nano-architecture of these materials makes them a potentially interesting colloidal drug delivery carrier system and that the method should be useful for a number of amphiphilic macromolecular precursors.     

PDMS-MDI-PEG多嵌段共聚物涂层表面微相分离行为研究

采用两步溶液聚合方法合成了一系列聚二甲基硅氧烷(PDMS)-4,4′-二苯基甲烷二异氰酸酯(MDI)-聚乙二醇(PEG)多嵌段共聚物.利用轻敲模式原子力显微镜(AFM)观察了嵌段共聚物的表明形貌,研究了退火、共聚物组成以及PEG分子量和不同的官能团对涂层表面微相分离行为的影响,同时对微相分离行为的形成机理也作了相应的探讨.研究表明,该嵌段共聚物即使在PDMS含量大于50wt%时,涂层表面仍呈现出规整有序的纳米级相分离结构,其中疏水相和亲水相分别由PDMS链段和MDI-PEG组分构成.     

Thermoresponsive PPEGMEA‐g‐PPEGEEMA well‐defined double hydrophilic graft copolymer synthesized by successive SET‐LRP and ATRP

A series of well‐defined double hydrophilic graft copolymers containing poly[poly(ethylene glycol) methyl ether acrylate] (PPEGMEA) backbone and poly[poly(ethylene glycol) ethyl ether methacrylate] (PPEGEEMA) side chains were synthesized by the combination of single electron transfer‐living radical polymerization (SET‐LRP) and atom transfer radical polymerization (ATRP). The backbone was first prepared by SET‐LRP of poly(ethylene glycol) methyl ether acrylate macromonomer using CuBr/tris(2‐(dimethylamino)ethyl)amine as catalytic system. The obtained comb copolymer was treated with lithium diisopropylamide and 2‐bromoisobutyryl bromide to give PPEGMEA‐Br macroinitiator. Finally, PPEGMEA‐g‐PPEGEEMA graft copolymers were synthesized by ATRP of poly(ethylene glycol) ethyl ether methacrylate macromonomer using PPEGMEA‐Br macroinitiator via the grafting‐from route. The molecular weights of both the backbone and the side chains were controllable and the molecular weight distributions kept narrow (M_w/M_n ≤ 1.20). This kind of double hydrophilic copolymer was found to be stimuli‐responsive to both temperature and ion (0.3 M Cl^? and SO). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 647–655, 2010     

Synthesis and characterization of an environmentally friendly PHBV/PEG copolymer network as a phase change material

Novel environmentally friendly poly(hydroxybutyrate-co-hydroxyvalerate) and poly(ethylene glycol) (PHBV/PEG) copolymer networks were synthesized through free-radical solution polymerization with PHBV diacrylate (PHBVDA) and polyethylene glycol diacrylate (PEGDA) as macromers. The molecular structure of PHBV/PEG copolymer network was characterized by Fourier transform infrared (FT-IR) and ¹H nuclear magnetic resonance (¹H NMR). The morphology of the PHBV/PEG copolymer network was characterized by polarization optical microscopy. Thermal energy storage properties, thermal reliability and thermal stability were investigated by differential scanning calorimetry (DSC) and thermogravimetric analysis. The results indicated that the PHBV/PEG copolymer network hindered the growth of PEG crystalline segments or PHBV segments. PHBV/PEG copolymer network had a higher latent heat enthalpy, which didn’t reduce with the components of PHBV increased. Moreover, PHBV/PEG copolymer network still had good thermal stability even at 300 °C. These results suggested that such environmentally friendly copolymer network would have wide applications in phase change energy storage materials.