Ultra-fast all-optical polarization-encoded modified signed-digit addition using terahertz-optical-asymmetric-demultiplexer (TOAD) switches

In this paper, enhanced designs for ultra-fast all-optical circuits based on the terahertz-optical-asymmetric-demultiplexer (TOAD) adders are proposed. The high speed is achieved due to the use of the nonlinear optical materials and the nonbinary modified signed-digit (MSD) number representation. The proposed all-optical circuits use polarized light to present the trinary digits of the MSD numbers. It will be shown that the polarization-encoded MSD adder uses much less TOADs switches (37.5% less) and it is faster by 33.33% compared to the intensity-encoded ones.     

Circuit designs of ultra-fast all-optical modified signed-digit adders using semiconductor optical amplifier and Mach-Zehnder interferometer

The need for increasingly high-speed digital optical systems and optical processors demands ultra-fast all-optical logic and arithmetic units. In this paper, we combine the attractive and powerful parallelism property of the modified signed-digit (MSD) number representation with the ultra-fast all-optical switching property of the semiconductor optical amplifier and Mach-Zehnder interferometer (SOA-MZI) to design and implement all-optical MSD adder/subtracter circuits. Non-minimized and minimized techniques are presented to design and realize efficient circuits to perform arithmetic operations. Several all-optical circuits’ designs are proposed with the objective to minimize the number of the SOA-MZI switches, the time delay units in the adders, and other optical elements. To use the switching property of the SOA-MZI structure, two bits per digit binary encoding for each of the trinary MSD digits are used. The proposed optical circuits will be very helpful in developing hardware modules for optical digital computing processors.     

All-optical negabinary adders using Mach–Zehnder interferometer

In contrast to optoelectronics, all-optical adders are proposed where all-optical signals are used to represent the input numbers and the control signals. In addition, the all-optical adders use the negabinary modified signed-digit number representation (an extension of the negabinary number system) to represent the input digits. Further, the ultra-speed of the designed circuits is achieved due to the use of ultra-fast all-optical switching property of the semiconductor optical amplifier and Mach–Zehnder interferometer (SOA–MZI). Furthermore, two-bit per digit binary encoding scheme is employed to represent the trinary values of the negabinary modified signed-digits.     

A comparison of optically and electronically controlled optical switches

Electronically and optically controlled optical switches are compared with respect to switch energy requirements. Only switches based on optical phase change are treated, since these have the largest flexibility. Further, only switches that preserve input wavelength at the output are considered, due to cascadeability requirements. It is argued that as long as ‘all-optical’ switches need electronically controlled switches for information transfer to the optical signals controlling the all-optical switch, this will compromise any other advantages that the all-optical switch and the corresponding systems might have. A further application for all-optical switches, which currently are orders of magnitude faster than electronically controlled ones, would be in banks of electronically controlled slower all-optical switches which are all-optically multiplexed to drive all-optical switches to data rates not currently achievable by electronically controlled switches. It is argued that such systems will be complex, requiring sophisticated electronic synchronization and being inferior to corresponding wavelength division multiplexing systems. Power dissipation and switch energy are analyzed for two different physical mechanisms for controllably changing the refractive index in the all-optical and electronically controlled optical switches: Pockels and Kerr effects as well as the plasma or free carrier effect and the relative merits of electronically and optically controlled optical switches using these are discussed. It is shown that, in the former case, (Pockels and Kerr effects) using representative data, electronically controlled switches are generally more power efficient than the all-optical counterparts.     

All-optical quantization and coding scheme for ultrafast analog-to-digital conversion exploiting polarization switches based on nonlinear polarization rotation in semiconductor optical amplifiers

A novel all-optical quantization and coding scheme for ultrafast analog-to-digital (A/D) conversion exploiting polarization switches (PSWs) based on nonlinear polarization rotation (NPR) in semiconductor optical amplifiers (SOAs) is proposed. In addition, a theoretical model for the polarization switch based on NPR is presented. Through cascading two PSWs, a 2-period transfer function for 3-bit long all-optical quantization and coding is realized numerically for the first time to the authors’ knowledge. The effective number of bits (ENOB), the limitation of bandwidth and conversion speed and the scalability are also investigated. The proposed all-optical quantization and coding scheme, combined with existing all-optical sampling techniques, will enable ultrafast A/D conversion at operating speed of hundreds of Gs/s with at least 3 bit resolution, and allows low optical power requirements, photonic integration, and easy scalability.     

All-optical logic gates and a half-adder based on lithium niobate photonic crystal micro-cavities

All-optical logic gates including AND, XOR, and NOT gates, as well as a half-adder, are realized based on twodimensional lithium niobate photonic crystal(PhC) circuits with Ph C micro-cavities. The proposed all-optical devices have an extinction ratio as high as 23 dB due to the effective all-optical switch function induced by twomissing-hole micro-cavities. These proposed devices can have potential implementation of complex integrated optical functionalities including all-optical computing in a lithium niobate slab or thin film.     

Single SOA based all-optical adder assisted by optical bandpass filter: Theoretical analysis and performance optimization

A simple and compact configuration of all-optical adders implemented with a single semiconductor optical amplifier (SOA) and optical bandpass filter (OBF) is presented in this paper. A comprehensive SOA model is put forward to investigate the output characteristics of the all-optical adders. The numerical simulation results demonstrate the influence of these key parameters, including input pulse peak power, pulsewidth, repetition rate, and OBF characteristics. Moreover some design rules are extracted for the proper selection of these parameters so as to ensure optimum performance. The obtained results confirm the feasibility of our configuration.     

Method of developing all-optical parallel to serial converter exploiting Kerr non-linearity of medium

Different all-optical logic operations, memory blocks etc. are developed using the inherent parallelism of optics. In any digital communication and computation system, the role of serial to parallel and parallel to serial data conversion are very much essential for making a data convenient for transition.Here in this paper, the authors propose a new scheme for developing an all-optical parallel to serial data conversion system by using optical J-K Flip-Flops and some logic gates based on optical non-linear switches. The uses of such switches are widely established in the area of optical parallel computation.This process can be extend for developing some all-optical digital devices like shift register, optical pulse counters etc. The proposed scheme deals with the best use of high parallelism of the optics, so the super-fast processing speed can be achieved.     

Photonic crystal-based all-optical arithmetic circuits without SOA-based switches

Various proposed optical computing devices involve nonlinear optical operation and use semiconductor optical amplifier (SOA)-based switches as fundamental elements for logic operations. Due to the nonlinear operation, these devices suffer from high power that causes problems in very large-scale optical integration. In this paper, a method is proposed to implement arithmetic operations using a photonic crystal (PhC) cell and eliminate the SOA-based switches altogether. The proposed method is employed on designing an all-optical full adder/subtractor circuit that requires only beam combiners and photonic crystal NOT gates.     

All-optical prefix tree adder with the help of terahertz optical asymmetric demultiplexer

We propose and describe an all-optical prefix tree adder with the help of a terahertz optical asymmetric demultiplexer (TOAD) using a set of optical switches. The prefix tree adder is useful in compound adder implementation. It is preferred over the ripple carry adder and the carry lookahead adder. We also describe the principle and possibilities of the all-optical prefix tree adder. The theoretical model is presented and verified through numerical simulation. The new method promises higher processing speed and accuracy. The model can be extended for studying more complex all-optical circuits of enhanced functionality in which the prefix tree adder is the basic building block.     

Au/MXene based ultrafast all-optical switching

All-optical switches have arisen great attention due to their ultrafast speed as compared with electric switches. However, the excellent optical properties and strong interaction of two-dimensional (2D) material MXene show great potentials in next-generation all-optical switching. As a solution, we propose all-optical switching used Au/MXene with switching full width at half maximum (FWHM) operating at 290 fs. Compared with pure MXene, the Au/MXene behaves outstanding performances due to local surface plasmon resonance (LSPR), including broadband differential transmission, strong near-infrared on/off ratio enhancement. Remarkably, this study enhances understanding of Au/MXene based ultrafast all-optical switching red-shifted about 34 nm in comparison to MXene, validating all optical properties of Au/MXene opening the way to the implementation of optical interconnection and optical switching.     

All-optical method of developing half and full subtractors by the use of phase encoding principle

In this paper the authors proposed all-optical half subtractor and full subtractor using phase encoding technique. The processing part of the proposed model is consists of numbers of optical coherent mixers and mirrors. Optical switches are used only in the encoding of inputs, but no such switches are used in the processing part. So real time operation based on this proposed encoding may be achieved. The output of the system always carries same intensity and therefore it is suitable for using in a combinational and sequential logic system.     

Design and Performance Analysis of High Speed Optical Binary Code Converter using Micro-Ring Resonator

The present paper describes various attractive logical code conversions using optical micro-ring resonator. We have proposed an all-optical switching activity using silicon waveguide based micro-ring resonator under low-power operation through two-photon absorption effect. The different properties of the optical switch are analyzed through numerical simulation. We have also proposed and described all-optical binary-to-octal, binary-coded-decimal-to-excess-3 and binary-to-Gray-code converter circuits by this proposed architecture. Numerical simulation results for code conversion verifying the proposed methods are given in this paper. We identify a combination of feasible ring radius and detuning through numerical simulation that allows analyzing the system performance of the scheme.     

Ultrafast all-optical signal processing with Symmetric Mach–Zehnder type all-optical switches

We present Symmetric Mach–Zehnder (SMZ) type all-optical switches: an SMZ all-optical switch, a polarization-discriminating SMZ (PD-SMZ) all-optical switch, and a delayed interference signal wavelength converter (DISC). These switches are capable of ultrafast, low control power, and low chirp switching, which is not restricted by slow relaxation of highly efficient nonlinearities. High repetition operation unrestricted by slow relaxation is also possible for these switches. This is because of a push–pull modulation scheme or sometimes called a differential phase modulation scheme. These three devices are similar, but different in some important aspects, thus a comparison is made among the three. Then semiconductor optical amplifiers (SOAs) are discussed as a nonlinear phase shifter for these devices. Then, ultrafast all-optical signal processing using SOA based SMZs is demonstrated. Error-free demultiplexing from 168 to 10.5 Gbit/s is presented, in which a hybrid-integrated SMZ (HI-SMZ) is used as a demultiplexer. In pulse regeneration experiment, the signal pulses at 84 Gbit/s are regenerated by the PD-SMZ and the regenerated pulses are demultiplexed to 10.5 Gbit/s by the HI-SMZ to verify error-free operation. The retiming capability of this scheme is quantitatively demonstrated. Also presented is error-free all-optical wavelength conversion at 168 Gbit/s using the DISC. These results represent the fastest error-free operations reported to date in each category.     

光梯度力驱动的纳米硅基光开关

通过一道光改变另一道光的传输路线是光子集成网络中重要而长远的目标, 然而, 由于硅材料的光学非线性较弱, 在硅材料上实现开关的全光控制难以实现. 因此本文提出了一种由光梯度力驱动的纳米硅基光开关, 实现了硅基光开关的全光控制. 该光开关由一个部分悬空的微环谐振器和一个交叉波导结构构成, 当通入一道控制光时, 悬空的微环谐振器在光梯度力的作用下发生弯曲, 微环谐振器的谐振波长随之发生变化, 从而实现光信号的传输路线发生改变. 该光开关利用纳米光子制造技术在标准绝缘体上硅晶圆上制造, 实验数据得出其最小消光比为10.67 dB, 最大串扰为 -11.01 dB, 开关时间分别为180 ns和170 ns. 该光开关具有尺寸小, 响应速度快, 低损耗和可拓展等优点, 在片上集成光路、高速信号处理以及下一代光纤通信网络中具有潜在应用.     

Control over hysteresis curves and thresholds of optical bistability in different semiconductor double quantum wells

The effects of optical field on the phenomenon of optical bistability(OB) are investigated in a K-type semiconductor double quantum well(SDQW) under various parametric conditions. It is shown that the OB threshold can be manipulated by increasing the intensity of coupling field. The dependence of the shift of OB hysteresis curve on probe wavelength detuning is then explored. In order to demonstrate controllability of the OB in this SDQW, we compare the OB features of three different configurations which could arise in this SDQW scheme, i.e., K-type, Y-type, and inverted Y-type systems. The controllability of this semiconductor nanostructure medium makes the presented OB scheme more valuable for applications in all-optical switches, information storage, and logic circuits of all optical information processing.     

Optical computation based on nonlinear total reflectional optical switch at the interface

A new scheme of binary half adder and full adder is proposed. It realizes a kind of all-optical computation which is based on the polarization coding technique and the nonlinear total reflectional optical switches.      

A method of developing wavelength encoded all-optical S–R flip-flop by the uses of semiconductor optical amplifier based Mach–Zenhder interferometer and phase conjugation system

A scheme for a high-speed wavelength encoded all-optical S–R flip-flop (or a digital memory cell for storing of optical bits) based on wavelength conversion (MZI) in semiconductor optical amplifier (SOA) and phase conjugation system (PCS) is proposed. The switching action of semiconductor optical amplifier (SOA) does not give too high operational speed because of electrical pumping power. But optical phase conjugation mechanism gives us ultrahigh operational speed. So, joint use of them gives rise to a more high speed system comparatively to only SOA based switches. Here two logic states of the whole system is encoded by two wavelengths as well as frequencies, since the information in the bit is unaffected throughout the communication not having regard to the loss of light energy due to reflection, refraction polarization, etc.     

All-optical reconfigurable logic operations with the help of terahertz optical asymmetric demultiplexer

An all-optical reconfigurable logic operation essentially constitutes a key technology for avoiding complex and speed limited optoelectronics conversions and performing various processing tasks. All-optical reconfigurable logic operations with the help of terahertz optical asymmetric demultiplexer (TOAD) is proposed and described. The paper describes the all-optical reconfigurable logic operations using a set of all-optical multiplexer and optical switches. We have tried to exploit the advantages of TOAD-based switch to design an integrated all-optical circuit which can perform the different logic operations AND, XOR, NOR and NOT. Numerical simulation confirming described methods is given in this paper.     

Phase sensitive,all-optical and self-integrated multi-logic AND,OR, XOR,and NOT gates

The design and simulation of all-optical and self-integrated primary logical AND, OR, XOR and NOT gates based on phase sensitivity of spatial optical solitons have been reported. By tuning the phase of incident solitons into a bulky nonlinear Kerr medium and interaction between the phase tuned solitons, the self-integrated logical gates are achieved simultaneously in a 50 μm long distance by one setup. These are the advantages in the application and design of integrated circuits. In addition, the proposed logical gates can be cascaded and the logical AND and XOR gates can simultaneously have two outputs. The simplicity of constructing, simultaneous functions with one setup, the possibility of integrating, high sensitivity and fabrication ease are the advantages of the proposed logical gates and may be a good candidate for the future of integrated photonic computational circuits.