钯碳催化下以甲酰肼为还原剂的卤代芳烃还原偶联反应研究

在Pd/C催化下, 以甲酰肼为还原剂, 卤代芳烃通过还原偶联反应能高选择性地合成相应的联苯化合物. 具有不同取代基的卤代芳烃的还原偶联反应产率在52%～94%之间.     

钯催化卤代芳烃的胺化反应研究

钯催化卤代芳烃胺化是形成Car-N的重要方法.配体的发展扩展了底物的适用范围, 提高了反应的选择性,实现了廉价易得的氯代芳烃的胺化,弱碱的使用提高了官能团的兼 容性,因此Pd催化芳胺化广泛应用于合成芳胺类化合物.本文以卤代芳烃为线索,对钯催化偶联胺化反应的研究进展进行了综述和展望.     

在催化体系可回收和无配体条件下溴化四丁基铵中钯催化卤代芳烃与芳基硼酸的Suzuki-Miyaura交叉偶联反应

我们发展一种在催化体系可回收和无配体条件下溴化四丁基铵（TBAB）中钯催化卤代芳烃与芳基硼酸的Suzuki-Miyaura交叉偶联反应方法。我们发现水的量对反应有很大的影响。当水的用量为1 %（质量比）时,反应的结果最好。在3 mol%的醋酸钯和1.5 g的TBAB（含1%的水）,一系列卤代芳烃与芳基硼酸的顺利地发生Suzuki-Miyaura交叉偶联反应,得到中等及良好的产率。而且在溴代芳烃和活泼的氯代芳烃的交叉反应中,Pd(OAc)2/TBAB催化体系可以回收重复使用多次,并且催化活性基本不变。     

TiCl~4-Ga还原体系中芳基三卤甲烷的还原偶联反应

研究了在低价钛(TiCl~4-Ga)试剂作用下,α,α,α-三卤甲基芳烃的还原偶联反应,得到了脱卤偶联产物-二卤代烯烃、炔烃。     

1-苯基-3-甲基-4-苯甲酰基吡唑啉酮/PdCl2在温和条件下催化Suzuki偶联反应的研究

考察了商品化的简单非膦配体1-苯基-3-甲基-4-苯甲酰基吡唑啉酮在有氧温和条件下的Suzuki偶联反应活性,探讨了反应温度、反应时间、溶剂以及碱对反应的影响。结果表明,该配体在优化的反应条件下能高效催化不同溴代反应物和氯代反应物与苯硼酸的交叉偶联反应;提高反应温度、延长反应时间和引入质子性极性有机/水混合溶剂有利于偶联反应的进行。     

可见光促进铜催化的唑类化合物不对称烷基化

直接在杂芳烃酸性C—H键引入烷基,是一种原子经济性高、步骤简单的合成方法,其产物烷基化的杂芳烃在生物学、药学和材料学等领域具有重要应用.近年来,通过不饱和卤代烃在杂芳烃酸性C—H键上直接芳基化、烯基化和炔基化的研究已经取得了很好进展,但杂芳烃的直接烷基化反应,由于相应卤代烷烃在反应中容易发生诸如β-H消除、还原脱卤和自身偶联等副反应,仍然具有一定的挑战性[1].为解决上述问题,一些利用贵金属催化和引入导向基的策略被用于提高卤代烃与杂芳烃交叉偶联的反应活性和选择性[2].     

以羰基磷氧化物为配体的铜催化的C-S偶联反应

以邻溴苯甲醛为原料合成了一系列的羰基磷氧化物,用作铜催化的C-S偶联反应的新配体.在较温和的反应条件下可成功催化碘代芳烃或溴代芳烃与硫醇的偶联反应,收率最高达99%.     

Cu2O/SiC高效催化卤代芳烃与酚类的Ullmann偶联反应

卤代苯与酚类化合物反应制取二芳基醚是现代有机合成中的一个重要反应.传统的二苯醚合成方法是铜催化卤代苯与酚类化合物的Ullmann型C-O偶联反应,但是这种方法需要苛刻的反应条件.后来,人们发现了Pd(0)和Cu(Ⅰ)基催化剂,但是前者成本较高,且需要使用昂贵的配体,因此其应用受到了限制,而铜作为一种成本较低的催化剂受到了越来越多的关注.铜催化剂可以分为均相和非均相两大类.均相铜催化剂使用的是铜盐,并且需要加入配体,成本较高,且不易分离和循环利用.非均相铜催化剂研究较多的是CuO,Cu2O及Cu纳米颗粒,其中Cu2O纳米颗粒催化剂对Ullmann型C-O偶联反应具有很高的催化活性,但是它在潮湿的空气中容易被氧化,因此需要寻找一种合适的载体防止Cu2O纳米颗粒被氧化.SiC具有优良的化学稳定性及导电导热性能,并且作为载体己经成功应用到很多热催化及光催化反应中.本文以高比表面积的SiC为载体,以二乙二醇作为溶剂和还原剂,采用传统的两步液相还原法制备了Cu2O/SiC催化剂,并通过X射线衍射、X射线光电子能谱、扫描电子显微镜(SEM)、透射电子显微镜(TEM)和H2程序升温还原等方法对Cu2O/SiC催化剂进行了表征.SEM和TEM结果表明,Cu2O纳米颗粒均匀分散在SiC表面,同时上述表征结果都表明Cu在SiC上主要以Cu2O的形式存在.将制备的Cu2O/SiC催化剂用于催化卤代芳烃与酚类的Ullmann C-O偶联反应中.以碘苯和苯酚的Ullmann C-O偶联反应为模型实验,考察了反应温度、反应时间、溶剂、碱的种类及用量和催化剂用量等条件的影响,得到了碘苯与苯酚UllmannC-O偶联反应的最优反应条件为:卤代芳烃14 mmol,酚类14 mmol,1.0当量的Cs2CO3,Cu2O/SiC(5 wt％) 10 mg,四氢呋喃10mL,在Ar气氛下150℃反应3h.在该条件下,二苯醚收率达到97％,转化频率(TOF)高达1136 h-1.Cu2O/SiC催化剂对Ullmann C-O偶联反应具有很好的普适性,并且对Ullmann C-S偶联反应也表现出很高的活性,TOF高达1186h-1.以碘苯和苯酚的Ullmann C-O偶联反应为基准实验,对催化剂的循环稳定性进行了考察.Cu2O/SiC催化剂五次循环后二苯醚的收率从97％降低至64％,这主要是由于活性组分Cu2O的流失所致.     

钯催化卤代芳烃的胺化反应的研究进展

钯催化卤代芳烃的胺化是合成芳胺化合物的重要方法,综述了近年来钯催化卤代芳烃与胺等不同含氮化合物的胺化反应研究进展,重点讨论了钯催化剂配体的结构、反应物比例、溶剂及温度等因素对反应的影响.     

联苯类化合物的合成

联苯类化合物是一类极为重要的有机合成中间体,在有机合成中往往通过有机金属偶联反应构建此类化合物.以反应底物分类综述了近年来通过偶联反应合成此类化合物的方法,详细介绍了以卤代芳烃与芳基金属化合物为底物的反应.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.