Modulating Polymer Dispersity with Light: Cationic Polymerization of Vinyl Ethers Using Photochromic Initiators

Deterministic methods for tuning polymer dispersity are rare, especially for nonradical polymerizations. Reported here is the first example of photomodulating dispersity in controlled cationic polymerizations of vinyl ethers using carboxy‐functionalized dithienylethene initiators. Reversible photoisomerization of these initiators induces changes in their acidities by up to an order of magnitude. Using the more acidic, ring‐closed isomers as initiators results in polymers with lower dispersities. The degree of light‐induced pK_a change in the initiators correlates with the degree of dispersity change in polymers derived from the isomeric initiators. The polymerizations are controlled, and dynamic photoswitching of dispersity during the polymerization reaction was demonstrated. This work provides a framework for photomodulating dispersity in other controlled polymerizations and developing one‐pot block copolymerization reactions in which the dispersities of component blocks can be controlled using light.     

Aminimides. IV. Homo- and copolymerization studies on trimethylamine methacrylimide

Trimethylamine methacrylimide (TAMI) has been homo- and copolymerized with methyl methacrylate, vinyl acetate, vinyl chloride, hydroxypropyl methacrylate, and acrylonitrile by free-radical initiators to soluble, low molecular weight polymers containing pendant aminimide groups along the backbone of the polymer chains. The reactivity ratios in the copolymerization of TAMI (M₁) with acrylonitrile (M₂) were determined: r₁ = 0.10 ± 0.01, r₂ = 0.37 ± 0.04. The Alfrey-Price Q and e values for TAMI were also calculated: Q = 0.18, e = ?0.60. This preliminary work indicates that TAMI has potential for the preparation of reactive polymers.     

Copolymerization of new pyrazolone-containing monomers with certain vinyl comonomers

The polymerization ability of two new pyrazolone-containing monomers—3-methyl-1-phenyl-4-crotonoyl-pyrazolone-5 ( Cr ) and 3-methyl-1-phenyl-4-(3′-phenyl-acryloyl) pyrazolone-5 ( Cy )—was investigated. The monomers were obtained by acylation of 3-methyl-1-phenyl-pyrazolone-5 with crotonyl chloride or cinnamoyl chloride, respectively. It was established that the two monomers do not homopolymerize either under the action of ionic and radical initiators nor with γ-rays (doses between 2 and 10 MRad). In contrast to this, the two monomers copolymerize with other vinyl comonomers. Copolymers of Cr and Cy with methacrylic acid (MAA), methyl methacrylate (MMA), and Styrene (St) were synthesized by radical copolymerization. The molecular weights of the polymer products obtained were in the 10,000–65,000 range. It was established that the molecular weight characteristics of the copolymers were affected by the concentration of the pyrazolone-containing monomer and by the chemical nature of the solvent used. The copolymerization of Cr and Cy with MAA was investigated in detail in order to evaluate the relative activity of the new monomers during copolymerization. The reactivity ratios (r) were calculated by three different methods with good agreement. The values obtained for the monomer pairs are: r_MAA = 0.61 ± 0.01, r_Cr = 0.04 ± 0.01; r_MAA = 0.64 ± 0.05, r_Cy = 0.02 ± 0.02. The Q/e values for Cr and Cy were determined using the reactivity ratios of both monomers.     

Oxoaminium salts as initiators for cationic polymerization of vinyl monomers

Oxoaminium salt ( 1 ), derived from 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO, 2 ) by one-electron oxidation, could be an initiator for cationic polymerization of vinyl monomers such as isobutyl vinyl ether (IBVE), 2,3-dihydrofuran, p-methoxystyrene, N-vinyl pyrrolidone, etc., to give the corresponding polymers, when 1 had a low nucleophilic counter anion. Formation of the adducts of 1 and IBVE as well as ¹H-NMR and IR data suggested the formation of polymers containing N? O? C structure as the polymer head group. In the polymerization of IBVE, the effects of solvent and concentration of 1 were little observed, however the polymerization rate was dependent on temperature. Furthermore, the thermal reaction of the polymers obtained, which were regarded as prepolymers for block copolymerization and polymeric initiators for radical polymerization, was studied. For example, poly(2-benzylidene-1,3-dioxane) obtained by the polymerization of 2-benzylidene-1,3-dioxane with oxoaminium hexafluoroantimonate ( 1, X = SbF₆) was employed as an initiator for radical polymerization of MMA to give its block copolymer with PMMA. © 1993 John Wiley & Sons, Inc.     

Gamma Ray Induced Low Temperature in Situ Polymerization of Vinyl Chloride and Copolymfrization of Vinyl Chloride-Vinyl Acetate in Taiwan-Produced Woods

Gamma radiation induced polymerization of vinyl chloride (VC) and copolymerization of vinyl chloride (VC)-vinyl acetate (VAc) in Taiwan cedars have been investigated at low temperatures. The polymerization-rate of VC and the copolymerization-rate of VC-VAc system in wood were found to be proportional to the n powers of the dose-rate, where n became close to the value of 1 as the polymerization temperature being lowered below 0°C. The oxygen in air was recognized to induce the delay of the induction period due to its retardation on the polymerization. The apparent activation energies of VC and VC-VAc for the polymerization and the copolymerization in wood were determined by use of the Arrhenius plotting as 4.0 Kcal/mole and 3.4 Kcal/mole respectively at the temperature-range of —15°C～20°C. The degree of polymerization of VC was greatly affected by the polymerization temperature, although it was observed to be independent on the total gamma dose within 1 Mrad and the kinds of wood. No graft reaction of PVC polymer and PVC-PVAc copolymer onto the wood cellulose was found, while low graft percentage of about 3% being obtained at 20° C in the case of using swelling agents. However, this value was found to be decreased to 0.1% at the temperature of —15°C. Based on the above-mentioned experimental results, the radiation induced low temperature polymerization of VC or copolymerization of VC-VAc system in Taiwan produced cedars are considered to proceed with radical polymerization mechanism.     

Vinyl Polymerization with Transition Metal Alkyls and Hydrides

Transition metal alkyls and hydrides isolated from Ziegler-type catalyst mixtures serve as appropriate models for coordination polymerization. These transition metal complexes initiate the polymerization of some vinyl compounds and aldehydes. In some cases the monomer-coordinated complexes may be isolated and the interaction of the monomer with the transition metal complexes may be studied. Comparison of the polymerization kinetics of the vinyl compounds with the decay kinetics of the initial transition metal complexes on interaction with the monomer provided important information with respect to the mechanism of coordination polymerization by these complexes. The effect of organoaluminum compounds on the reactivity of the transition metal complexes has been also studied. These transition metal alkyls initiate the polymerization of acetaldehyde to give a polyether-type polymer at -78°C and a polymer with OH groups at room temperature.     

Studies on polymers containing functional groups. II. Polymerization behavior of o-hydroxystyrene

The polymerization behavior of o-hydroxystyrene with free-radical and cationic initiators and without an initiator was examined. The structures thus obtained were estimated. Although polymerization behavior of o-hydroxystyrene was rather complicated, according to the results, it appeared that each polymerization more or less might simultaneously follow the two types of mechanisms: normal vinyl polymerization and polymerization through the addition to benzene nuclei. The proportion of addition to benzene nuclei was considered to be highest in the polymerization with BF₃·(OEt)₂ and lowest in that with azobisisobutyronitrile. Degrees of polymerization of these polymers were low in all cases (42–82). Some brief experiments on copolymerization of o-hydroxystyrene were carried out.     

SYNTHESIS OF POLY(VINYLIDENE FLUORIDE) WITH LOW CONTENTS OF HEAD-TO-HEAD CHAIN

The relations between polymerization conditions of vinylidene fluoride and contents of head-tohead chain in the polymer have been studied. It shows that the contents of head-to-head chain of the polymer are related to its polymerization temperature, but are not related with the kinds of initiators used. Therefore, poly(vinylidene fluoride) with low contents of head-to-head chain (ca. 3%) can be prepared under lower polymerization temperature. Plot of the contents of A chains against melting points of the polymer is linear, which can be expressed by an equation: A=24.8 + 0.362 T_m(%).     

Polymeric catechol derivatives. IV. Polymerization behavior of 4-vinylcatechols and some properties of their polymeric derivatives

The polymerization and copolymerization of 4-vinylcatechols, such as 2-(0-methyl)-4-vinylcatechol (I), 3,4-dimethoxystyrene (II), and 3,4-methylenedioxystyrene (III), were investigated in cyclohexanone at 30°C, using tri-n-butylborane as an initiator. The reactions yielded vinyl polymers and copolymers. The copolymerization parameters of I–III were determined; their Q and e values were found to be similar to those of styrene and vinylhydroquinone. The copolymerization of I–III gave copolymers of a highly alternating character. The thermal stability of the polymers and copolymers so obtained was also studied. The redox potentials of hydroloyzed poly(I) were examined; the reverse “polymer effect” was observed.     

Polymerization of allyl(vinyl phenyl) ethers and reactions of the resulting polymers

Solution polymerizations of allyl(o-vinyl phenyl)ether and allyl(p-vinyl phenyl)ether with cationic and radical initiators were investigated. Soluble polymers were formed in polymerizations with boron trifluoride etherate and with benzoyl peroxide. In polymerization with azobisisobutyronitrile the polymerization in dilute solution gave a soluble polymer, whereas that in concentrated solution gave a crosslinked, insoluble one. For informationon the polymerization behavior some infrared and ultraviolet spectroscopic investigations of the soluble polymers were made. From these results it appears that polymers with pendant allyl groups are formed in polymerization with boron trifluoride etherate at low temperature, and polymers containing pendant vinyl groups and allyl groups are obtained with the two types of radical initiator. Copolymerizations of these monomers with ethyl vinyl ether and styrene with the use of boron trifluoride etherate were sucessfully effected. Such reactions as Claisen rearrangement, crosslinking induced with radical initiators, and epoxidation with perbenzoic acid were examined for the polymers prepared in the polymerization with boron trifluoride etherate. Good results were obtained for the former two reactions. However, the latter was unsuccessful.     

Iodine-Transfer Polymerization (ITP) of Ethylene and Copolymerization with Vinyl Acetate

Controlled radical polymerization of ethylene using different commercially available, cheap, and non-toxic iodo alkyls is performed by iodine transfer polymerization (ITP) under mild conditions (≤100 °C and ≤200 bar). The formed well-defined iodo end-capped polyethylene (PE−I) species is very stable upon storage. Narrow molar-mass distributions (dispersities around 1.6) were obtained up to number average molar masses of 7300 g mol⁻¹. The ethylene copolymerization by ITP (ITcoP) with vinyl acetate allowed to form a broad range of poly(ethylene-co-vinyl acetate) (EVA) containing from 0 to 85 mol % of VAc unit. In addition, EVA-b-PE block copolymers or EVA-b-EVA gradient block copolymers with different content of VAc in the blocks were obtained for the first time using ITP. Finally, reactivity trends were explored by a theoretical mechanistic study. This highly versatile synthetic platform provides a straightforward access to a diverse range of well-defined PE based polymer materials.     

Vinyl polymerization initiated by reducing compounds of transition metals—5. Graft copolymerization of chlorine containing polymers by vanadium(III) chloride

Graft copolymerization of methyl methacrylate (MMA) on chlorine containing polymers [e.g. trichloroacetates of poly(vinyl alcohol), microcrystalline cellulose or starch and chlorinated atactic polypropylene] in the presence of vanadium(III) chloride (VCl₃) was carried out in dimethylformamide at 70°. The grafting n-butyl methacrylate or ethyl acrylate on poly(vinyl trichloroacetate) displayed high efficiency; in the first system, however, crosslinked polymer fractions were formed. The number-average molecular weight of grafted branches was determined. Chromium(II) acetate and titanium(III) chloride are less efficient initiators for polymerization of methacrylates in the presence of trichloroacetates.     

Cationic polymerization of α,β-disubstituted olefins. Part II. Cationic polymerization of propenyl N-butyl ether

The cationic polymerization of propenyl n-butyl ether (PBE) in methylene chloride with boron fluoride etherate at ?78°C. has been studied. The copolymerization of PBE with vinyl n-butyl ether (VBE) showed that both the isomers are more reactive than VBE, and their monomer reactivity ratios were found to be:     

Polymerizability of Exo‐methylene‐lactide toward vinyl addition and ring opening

This work examines the stereochemical control and polymerizability of exo‐methylene‐lactide (MLA) or (6S)‐3‐methylene‐6‐methyl‐1,4‐dioxane‐2,5‐dione, a chiral monomer derived from l ‐lactide, toward vinyl‐addition and ring‐opening polymerization (ROP) pathways, respectively. Currently, no information on the stereochemistry of the vinyl‐addition polymerization of MLA is known, and the possible ROP pathway is unexplored. Accordingly, this work first investigated the stereochemical control and other characteristics of the radical polymerization of MLA and its copolymerization with an analogous exo‐methylene‐lactone, γ‐methyl‐α‐methylene‐γ‐butyrolactone (MMBL), and di‐methylene‐lactide (DMLA) or 3,6‐dimethylene‐1,4‐dioxane‐2,5‐dione. The MLA homopolymerization produced optically active, but atactic, vinyl‐type polymers having a specific rotation of [α]²³_D = ?42 ± 4°, a high T_g from 229 to 254 °C, and a medium (M_w = 76.3 kg/mol, ? = 1.16) to high (M_w = 358 kg/mol, ? = 2.83) molecular weight, depending on the solvent. The copolymerization of MLA with MMBL afforded copolymers exhibiting enhanced thermal stability, while its copolymerization with DMLA led to cross‐linked polymers. The results obtained from the model reactions designed to probe the possible ROP indicate that the nonpolymerizability of MLA by initiators or catalysts comprising acidic, protic, and/or nucleophilic reagents is due to the high sensitivity of MLA toward such common ROP reagents that trigger decomposition or other types of transformations of MLA forming nonpolymerizable derivatives. © 2015 Wiley Periodicals, Inc. J. Polym. Sci. Part A: Polym. Chem. 2015 , 53, 1523–1532     

双官能度引发剂引发苯乙烯聚合微观动力学

采用 2 ,5 二甲基 2 ,5 二己酰基过氧化己烷 (DMDEHPH)为引发剂 ,在 5 5～ 80℃下引发苯乙烯聚合 .通过研究影响聚合速率的各种因素 ,得出了聚合速率对单体浓度和引发剂浓度的级数分别为 1 0和 0 5次、聚合活化能为 92 0kJ mol、引发效率为 0 5 5± 0 0 3.温度一定 ,引发效率随引发剂浓度的增加而减小 .求得 6 0和70℃下DMDEHPH向引发剂的链转移常数分别为 0 0 37和 0 0 4 8、向单体的链转移常数分别为 0 5 9× 10 - 4和0 75× 10 - 4.     

Effect of reaction medium on copolymerization of acrylonitrile and methyl acrylate

The copolymerization of acrylonitrile (AN) with methyl acrylate (MEA) has been investigated in three types of polymerization, i.e., emulsion polymerization in water with a water-soluble initiator, suspension polymerization in water with an oil-soluble and water-insoluble initiator, and solution polymerization in dimethyl sulfoxide (DMSO). Monomer reactivity ratios at 50°C. for AN and MEA are found to be r₁ = 0.78 ± 0.02, r₂ = 1.04 ± 0.02 in emulsion polymerization; r₁ = 1.02 ± 0.02, r₂ = 0.70 ± 0.02 in DMSO solution polymerization; r₁ = 0.75 ± 0.05, r₂ = 1.54 ± 0.05 in suspension polymerization. The large differences found in the reactivity ratios may be attributed to the different ratio of concentration of two monomers in the loci of polymerization. Chemically, AN is somewhat more reactive than MEA as shown by the reactivity ratios in DMSO. In the case of the suspension polymerization, the MEA/AN ratio in the polymer particles in which polymerization occurs may be higher than that in the total phase. Experimental results of the emulsion polymerization show that the emulsion polymerization of AN occurs both in the particles and in water. In addition, rates of the copolymerization of AN with MEA have also been investigated.     

Free‐radical crosslinking copolymerization of 2,2′‐azobis[N‐(2‐propenyl)‐2‐methylpropionamide] with vinyl benzoate resulting in polymeric azo initiators

2,2′‐Azobis[N‐(2‐propenyl)‐2‐methylpropionamide] (APMPA) with two carbon–carbon double bonds and an azo group was copolymerized with vinyl benzoate (VBz) at 60 °C, resulting in azo groups containing VBz/APMPA prepolymers and crosslinked polymers as soluble and insoluble polymeric azo initiators, respectively. The polymerization characteristics of APMPA as a novel diallyl monomer were clarified with the rate and degree of polymerization and the monomer reactivity ratios. The gelation behaviors in VBz/APMPA crosslinking copolymerizations were examined in detail with a comparison of the actual gel point and the theoretical gel point calculated according to Stockmayer's equation with the tentative assumption of equal reactivity for both vinyl groups belonging to VBz and APMPA. The effectiveness of the resulting branched or crosslinked poly(VBz‐co‐APMPA)s as soluble or insoluble polymeric azo initiators, respectively, at providing graft polymers through the cleavage of azo groups at an elevated temperature was examined by the polymerization of allyl benzoate at 120 °C. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 317–325, 2002     

自由基嵌段共聚合新进展

本文引用５０多篇文章，按引发方式不同从顺序引发剂，ｉｍｉｆｅｒｔｅｒ法，高分子引发剂法和自由基性聚合等几方面综述了自由基嵌段共聚合近１０年来的新进展。     

Controlled random and alternating copolymerization of (meth)acrylates,acrylonitrile, and (meth)acrylamides with vinyl ethers by organotellurium‐, organostibine‐, and organobismuthine‐mediated living radical polymerization reactions

Random and alternating copolymerizations of acrylates, methacrylates, acrylonitorile, and acrylamides with vinyl ethers under organotellurium‐, organostibine‐, and organobismuthine‐mediated living radical polymerization (TERP, SBRP, and BIRP, respectively) have been studied. Structurally well‐controlled random and alternating copolymers with controlled molecular weights and polydispersities were synthesized. The highly alternating copolymerization occurred in a combination of acrylates and vinyl ethers and acrylonitorile and vinyl ethers by using excess amount of vinyl ethers over acrylates and acrylonitorile. On the contrary, alternating copolymerization did not occur in a combination of acrylamides and vinyl ethers even excess amount of vinyl ethers were used. The reactivity of polymer‐end radicals to a vinyl ether was estimated by the theoretical calculations, and it was suggested that the energy level of singly occupied molecular orbital (SOMO) of polymer‐end radical species determined the reactivity. By combining living random and alternating copolymerization with living radical or living cationic polymerization, new block copolymers, such as (PBA‐alt‐PIBVE)‐block‐(PtBA‐co‐PIBVE), PBA‐block‐(PBA‐alt‐PIBVE), and (PTFEA‐alt‐PIBVE)‐block‐PIBVE, with controlled macromolecular structures were successfully synthesized. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Effect of temperature and solvents on stereospecific polymerization of vinyl alkyl ethers catalyzed by aluminum sulfate–sulfuric acid complex

The effect of polymerization temperature and solvents was determined on the crystallinity of polymers of vinyl isobutyl ether and of vinyl n-butyl ether prepared with aluminum sulfate–sulfuric acid complex catalyst. Principally, the methyl ethyl ketone (MEK)-insoluble fractions of these polymers were used for characterization. Density, per cent crystallinity by x-ray diffraction, infrared ratio, and dilatometric volume contraction of these polymer fractions were used as criteria of crystallinity. The MEK-insoluble fractions of poly(vinyl n-butyl ethers) prepared in carbon disulfide in the temperature range of ?30 to +25°C did not show any significant difference in the values of the above crystallinity parameters. The polymer obtained at 50°C. was less crystalline than the rest of the polymers. The MEK-insoluble fractions of poly(vinyl isobutyl ethers) prepared at 0–50°C. in carbon disulfide and n-heptane solvents also did not significantly differ in their degree of crystallinity. They were, however, decidedly less crystalline than the MEK-insoluble fractions of the corresponding polymers obtained at ?20°C. These data a indicate that on increasing the temperature of polymerization the crystallinity of the polymers was either unchanged or decreased slightly. The polymerizations of vinyl n-butyl ether and vinyl isobutyl ethers were also carried out in binary mixtures of carbon disulfide with n-heptane, chlorobenzene, and MEK. Generally, increasing the concentration of carbon disulfide increased the inherent viscosities of polymers as well as the weight percentage of their MEK-insoluble fractions. The MEK-insoluble fraction of poly(vinyl isobutyl ether) prepared in carbon disulfide-MEK mixture (volume ratio 2:1) was isotactic and highly crystalline. Likewise, the MEK-insoluble fractions of two polymers of vinyl n-butyl ether prepared in MEK itself were also isotactic and highly crystalline. Compared to poly(tetramethylene oxide), these latter fractions exhibited less dependence of rate of crystallization upon temperature. Consequently, at low degrees of supercooling they crystallize much more rapidly than does poly(tetramethylene oxide).