氧在甲基丙烯酸辛酯-乙烯基咪唑共聚物/钴卟啉复合膜中的溶解和扩散过程

讨论了氧在甲基丙烯酸辛酯 乙烯基咪唑共聚物 钴卟啉复合膜中的溶解和扩散过程,用二元输送模型分析了间α,α,α,α-四(邻三甲基乙酰胺苯基)钴卟啉(CoP)作为氧载体的复合膜氧输送性能.研究发现,固定在聚合物中的CoP与氧可逆地络合和解络合,其络合平衡常数K为14mol- 1 L ,根据吸附实验结果计算出氧在基体聚合物中的物理溶解度系数kD 为4 4×10 - 5cm3(STP)cm- 3Pa- 1 .聚合物 载体复合膜除了物理渗透外,氧还可通过与载体的络合和解络合而扩散,从而促进氧的输送.氧通过载体的扩散系数(DC)和通过基体聚合物的物理扩散系数(DD)的比值为0 0 8.     

钴卟啉的不可逆氧化及含氟聚合物对钴卟啉复合膜氧络合寿命的影响

研究了甲基丙烯酸八氟戊酯 乙烯基咪唑共聚物 (PFIm)与 5 ,1 0 ,1 5 ,2 0 四 (邻 三甲基乙酰胺苯基 )钴卟啉 (TPPCo)复合膜的氧络合百分率随环境湿度和时间的变化 ,讨论了钴卟啉不可逆氧化的机理、动力学 ,及钴卟啉与氧络合的寿命 .空气中的水分子进攻与氧络合的钴卟啉 ,生成过氧化氢自由基和三价钴卟啉 ,是钴卟啉失去与氧络合能力的主要原因 .发现PFIm的憎水性可抑制由水分子引起的钴卟啉的不可逆氧化反应 ,可显著延长钴卟啉与氧络合的寿命 ,从而使含氟的PFIm TPPCo膜与氧络合的寿命要比甲基丙烯酸辛酯 乙烯基咪唑共聚物 (POIm)与钴卟啉复合膜的寿命长     

甲基丙烯酸八氟戊酯乙烯基咪唑共聚物的合成及与钴卟啉复合物的氧结合性能

研究了甲基丙烯酸八氟戊酯单体及其与乙烯基咪唑共聚物的合成与表征 ,以及该共聚物与氧载体钴卟啉配位复合物的氧结合性能 .共聚物分子量和乙烯基咪唑含量分别由GPC和元素分析方法测定 ,结果为5 0× 10 4 和 2 5mol % .共聚物中的咪唑基与钴卟啉在溶液中配位 ,复合物具有快速、可逆的氧结合特性 .溶剂对复合物的氧结合性能影响较大 ,复合物在四氢呋喃中的氧结合亲合力大于在N ,N 二甲基甲酰胺中的亲合力     

聚合物-卟啉钴复合膜的氧气促进输送性能

综述了聚合物－卟啉钴复合膜的氧气促进输送性能。讨论了卟啉钴的结构及与氧的结合性能，聚合物－卟啉钴复合膜的氧气促进输送特性，影响聚合物－卟啉钴复合膜氧气透过性能的因素及卟啉钴的不可逆氧化反应机理。     

N-(4-乙烯基)苄基咪唑共聚物的合成及与钴卟啉络合物的氧结合性能

研究了N-(4-乙烯基)苄基咪唑单体及其与甲基丙烯酸辛酯共聚物(PBIOM)的合成与表征,以及咪唑基有机或聚合物配位体与钴卟啉(CoP)络合物的氧结合性能.合成的PBIOM重均分子量和咪唑基含量分别由GPC和元素分析方法测定,结果为3.4×105和57 mol%.PBIOM或苄基咪唑(BIm)中的咪唑基与CoP在溶液中配位,得到的CoP-PBIOM或CoP-BIm络合物具有快速、可逆的氧结合特性.相同氧气分压下CoP-BIm络合物在三氯甲烷溶液中的氧结合百分率略大于CoP-PBIOM络合物.CoP-PBIOM络合物固体膜的氧结合亲和力大于三氯甲烷溶液中的氧结合亲和力.60℃下CoP-PBIOM固体膜的氧结合半衰期为40.7 h,而CoP-BIm固体膜为8.8 h,表明聚合物配位体显著提高了CoP络合物的氧结合寿命.     

氟涂层对聚合物-钴卟啉膜氧气输送性能及其寿命的影响

采用在聚合物-钴卟啉(CoP)膜表面旋转涂覆氟涂料法,制备了氧/氮分离膜.研究表明,与未涂层膜相比,氟涂层膜中的CoP与氧表观结合平衡常数、膜的氧渗透系数和氧/氮选择性没有发生明显变化.随氟涂层厚度增加,氧渗透系数稍有降低,但水蒸汽渗透系数显著降低.由于氟涂层的憎水性,使涂层膜的水蒸汽渗透系数显著降低,氧载体CoP与氧结合寿命延长了4倍.     

非对称取代卟啉钴（Ⅱ）轴向配位反应的热力学研究

合成了非对称对位取代卟啉钴（Ⅱ）（５－（４－乙酰胺基苯基）－１０，１５，２０－三（４－甲基苯基）卟啉钴（Ⅱ））用分光光度法测量了该体系与一系列含咪唑基配体（２－甲基咪唑（２－ＭｅＩｍ），Ｎ－甲基咪唑（Ｎ－ＭｅＩｍ）２－乙基－４－甲基咪唑（ＥＭＩｍ）克霉唑（ＧＭＺ）轴向配位反应的平衡常数，研究结果表明，配体的尺寸及取代基的位置将向轴向配合物的稳定性产物影响，其平衡常数呈现ＫＧＭＺ〉ＫＮ－ＭｅＩｍ〉Ｋ     

二硫桥键钴卟啉二聚体的合成与电催化氧还原性能

成功合成了二硫桥键相连的钴卟啉二聚体2Co。通过循环伏安电化学方法测试,在无水二氯甲烷溶剂中,钴卟啉二聚体展示了3个氧化和2个还原峰,表明此钴卟啉二聚体可以稳定多重负/正电荷。详细研究了在酸性条件下的钴卟啉二聚体的电催化氧还原性能。钴卟啉二聚体的电催化氧还原显示了高稳定性和高活性,测得转移电子数为3.5~3.6之间。钴卟啉二聚体的电催化氧还原性能说明通过二硫键对钴卟啉单体二聚化可以提高钴卟啉的电催化氧还原性能。     

ms-四咪唑基卟啉络合金属离子的能力及其金属络合物的催化性能

本文考察了两种ms-四咪唑基卟啉〔H₂T(2-I)P和H₂T(4或5-I)P〕对锌离子的络合能力,并与ms-四苯基卟啉〔H₂TPP〕进行了比较。用ms-四咪唑基金属卟啉〔MT(2-I)P和MT(4或5-I)P〕作为催化剂,以分子氧为氧源,考察了对氢醌、异丙硫醇和抗环血酸三种底物氧化反应的催化活性。在后一底物的氧化反应中对CoT(2-I)P,CoT(4或5-I)P和CoTPP进行了对比。此外,还用EHMO程序计算了卟吩、ms-四咪唑基卟啉、ms-四苯基卟啉及其锌络合物的净电荷分布和能量,对反应结果作了比较满意的解释。     

钴卟啉络合物的氧结合性能及其在功能材料中的应用

钴卟啉可与氧发生迅速、可逆的结合反应,是有效的氧载体,已被用于氧气吸收、光学传感器和氧气选择性分离膜。综述了钴卟啉的立体结构、配住体、环境等对其与氧可逆结合性能的影响,以及钴卟啉在功能材料中的应用。     

SYNTHESIS OF POLY（3,4-AZOPYRIDYLENE） AND OXYGEN-BINDING AFFINITY OF ITS COMPLEX WITH COBALTPORPHYRIN

Synthesis and characteristics of poly(3,4-azopyridylene) (PAP), conductivity and oxygen-binding affinity of its complex with meso-α,α,α,α-tetrakis(o-pivalamidophenyl) porphyrinatocobalt(Ⅱ) (CoP) were studied. PAP was prepared by oxidative polymerization of 3,4-diaminopyridine (DAP) in DMF solution using CuCl/pyridine as the catalyst. IR and NMR results showed that the peak of amido group in DAP was converted to the azo group in PAP and a π conjugated polymer was synthesized. The average molecular weight of PAP was determined to be 5.0 × 103. The PAP-CoP complex was prepared by complexing the pyridyl group of PAP with the fifth coordination site of CoP in DMF solution. In comparison with the CoP complex with a non-π conjugated polymer, the PAP-CoP complex shows good electroconductivity of 5.8 × 10-6 Scm-1. The PAP-CoP complex displays a reversible change in the UV-Visible absorption spectrum from the deoxy form to the oxy or oxygen-binding one with an isosbestic point, in response to the partial oxygen pressure of the atmosphere. The oxygen-response behavior was monitored at the absorbance ascribed to the oxy form at 548 nm to give the oxygen-binding affinity.The oxygen-binding equilibrium curves of PAP-CoP complex obey a Langmuir isotherm. DMF has great effects on the oxygen-binding properties of the PAP-CoP complex. The oxygen-binding affinity of PAP-CoP complex in the solid state is higher than that in DMF solution. With decreasing temperature, the oxygen-binding affinity of the PAP-CoP complex increases.     

O2/n2-separation by polymer-bound cobalt complexes

Facilitated or complexation-mediated transport of oxygen in the solid membrane containing a fixed carrier was described, by using the polymer-bound cobalt Schiff's base chelate (CoS) and cobaltporphyrin (CoP). α³ β-Substituted cobaltporphyrin derivatives were synthesized: The oxygen-binding reaction to cobalt was affected by the cavity structure on porphyrin, i.e., unbulky amido-substituted groups such as acetylamido- and acrylamido-substituents enhanced oxygen-binding and -dissociation rate constant or provided an oxygen-binding pathway. Oxygen transport through the membranes of these polymer-bound CoP derivatives was selectively augmented due to the rapid and reversible oxygen-binding. Diffusion constants via the fixed CoPs correlated to the characteristics of oxygen-binding reaction.     

Oxygen-binding to simple cobaltporphyrins combined with polyvinylmidazole

Reversible oxygen-binding was observed at low temperature for the poly(vinylimidazole-co-octyl methacrylate) complexes of the simple or planar cobaltporphyrins (CoP) such as cobalt-tetraphenylporphyrin and cobalt-octaethylporphyrin. The oxygen-binding affinity and rate constants were compared with those for the cobalt-picketfence porphyrin, a typical oxygen-carrier. The low oxygen-binding affinity for the CoP complexes was attributed to the enormously large oxygen-releasing rate constant.     

Oxygen dissolution and transport in cobaltporphyrin-bound organophosphazene membranes

Rubbery poly(organophosphazene)s were synthesized, and were combined with cobaltporphyrin (CoP) which binds molecular oxygen rapidly and reversibly. The apparent oxygen-binding equilibrium constant (K_app) is in proportion to the physical solubility coefficient of oxygen in the polymer, although the reduced equilibrium and thermodynamic parameters are not dependent on the polymer matrix species. Diffusivity of oxygen via the fixed CoP(D_C) is enhanced for poly(organophosphazene) membranes with a larger oxygen diffusion constant. Poly(organophosphazene) membranes with both a large K_app and D_C yield high oxygen permeability.     

Specific oxygen-binding to a polymer-supported N,N-disalicylidenethylenediaminocobalt complex

A polymer membrane containing N,N-disalicylidenethylenediaminocobalt (Co(salen)) was prepared. The Co(salen) supported in the polymer not only worked as a reversible and specific oxygen-adsorbent but discontinuously bound oxygen at the atmospheric oxygen partial pressure of ca. 15 cmHg to give an on-off-like oxygen-binding curve. Oxygen permeation through the Co(salen) membrane was also augmented in the higher upstream oxygen pressure region, which was caused by the specific oxygen-binding to the Co(salen) fixed in the membrane.