Simple, efficient catalyst system for the palladium-catalyzed amination of aryl chlorides, bromides, and triflates

Palladium complexes supported by (o-biphenyl)P(t-Bu)(2) (3) or (o-biphenyl)PCy(2) (4) are efficient catalysts for the catalytic amination of a wide variety of aryl halides and triflates. Use of ligand 3 allows for the room-temperature catalytic amination of many aryl chloride, bromide, and triflate substrates, while ligand 4 is effective for the amination of functionalized substrates or reactions of acyclic secondary amines. The catalysts perform well for a large number of different substrate combinations at 80-110 degrees C, including chloropyridines and functionalized aryl halides and triflates using 0.5-1.0 mol % Pd; some reactions proceed efficiently at low catalyst levels (0.05 mol % Pd). These ligands are effective for almost all substrate combinations that have been previously reported with various other ligands, and they represent the most generally effective catalyst system reported to date. Ligands 3 and 4 are air-stable, crystalline solids that are commercially available. Their effectiveness is believed to be due to a combination of steric and electronic properties that promote oxidative addition, Pd-N bond formation, and reductive elimination.     

Cross-coupling and dehalogenation reactions catalyzed by (N-heterocyclic carbene)Pd(allyl)Cl complexes

A series of well-defined, air- and moisture-stable (NHC)Pd(allyl)Cl (NHC = N-heterocyclic carbene) complexes has been used in several catalytic reactions: Suzuki-Miyaura cross-coupling, catalytic dehalogenation of aryl halides, and aryl amination. The scope of the three processes using various substrates was examined. A general system involving the use of (IPr)Pd(allyl)Cl as catalyst and NaO(t)Bu as base has proven to be highly active for the Suzuki-Miyaura cross-coupling of activated and unactivated aryl chlorides and bromides, for the catalytic dehalogenation of aryl chlorides, and for the catalytic aryl amination of aryl triflates. All reactions proceed in short reaction times and at mild temperatures. The system has also proven to be compatible with the microwave-assisted Suzuki-Miyaura cross-coupling and catalytic dehalogenation processes, affording yields similar to those of the conventionally heated analogous reactions.     

Selective Monoarylation of Primary Amines Using the Pd‐PEPPSI‐IPentCl Precatalyst

A single set of reaction conditions for the palladium‐catalyzed amination of a wide variety of (hetero)aryl halides using primary alkyl amines has been developed. By combining the exceptionally high reactivity of the Pd‐PEPPSI‐IPent^Cl catalyst (PEPPSI=pyridine enhanced precatalyst preparation, stabilization, and initiation) with the soluble and nonaggressive sodium salt of BHT (BHT=2,6‐di‐tert‐butyl‐hydroxytoluene), both six‐ and five‐membered (hetero)aryl halides undergo efficient and selective amination.     

Preparation of Phosphinated Polymer‐Incarcerated Palladium and Its Application to C?N and C?C Bond‐Forming Reactions

Phosphinated polymer‐incarcerated (PI) Pd catalysts were prepared by immobilization of palladium with phosphinated polymers by using the PI method. The phosphinated PI Pd catalysts showed good catalytic activity without externally added phosphine ligands in the amination of aryl halides for C N bond‐forming reactions, as well as in Suzuki–Miyaura and Sonogashira coupling. No leaching of palladium from the immobilized Pd was observed by fluorescence X‐ray analysis. Furthermore, it was found that immobilization of Pd by the PI process facilitated the suppression of poisoning of the metal by amines. These effects can be ascribed to stabilization of the catalyst by both the phosphine moieties and the benzene rings in the swollen polymer support. The phosphinated PI Pd catalysts could also be recovered by simple filtration and reused several times without leaching of palladium in both the amination and Suzuki–Miyaura coupling reactions.     

Efficient imidazolium salts for palladium-catalyzed Mizoroki-Heck and Suzuki-Miyaura cross-coupling reactions

The system, Pd(OAc)2/imidazolium salts (L2), was found as an efficient catalyst in the Heck coupling reaction of olefins with aryl halides and Suzuki reactions of various aryl halides with aryl boronic acids under aerobic condition. This catalytic system demonstrates great tolerance to a wide range of groups on all substrates of aryl halides, alkenes and aryl boronic acids.     

Hemilabile‐coordinated copper promoted amination of aryl halides with ammonia in aqueous ethylene glycol under atmosphere pressure

Direct amination of aryl iodides and bromides with ammonia under 1 atm pressure has been effected using in situ‐generated hemilabile coordinated copper(I) species from copper(I) halides or copper metal in aqueous ethylene glycol, producing primary aromatic amines in good yields. Ammonia pressure and water were found to accelerate the copper‐mediated reaction while strong chelating ligands showed a suppression effect. A rationale for the copper‐mediated amination of aryl halides with ammonia is given based on a double‐face role of chelating effect. Copyright © 2009 John Wiley & Sons, Ltd.     

Improved synthesis of aryltriethoxysilanes via palladium(0)-catalyzed silylation of aryl iodides and bromides with triethoxysilane.

The scope of the palladium-catalyzed silylation of aryl halides with triethoxysilane has been expanded to include aryl bromides. A more general Pd(0) catalyst/ligand system has been developed that activates bromides and iodides: palladium(0) dibenzylideneacetone (Pd(dba)(2)) is activated with 2-(di-tert-butylphosphino)biphenyl (Buchwald's ligand) (1:2 mol ratio of Pd/phosphine). Electron-rich para- and meta-substituted aryl halides (including unprotected aniline and phenol derivatives) undergo silylation to form the corresponding aryltriethoxysilane in fair to excellent yield; however, ortho-substituted aryl halides failed to be silylated.     

Convenient and efficient Suzuki-Miyaura cross-coupling catalyzed by a palladium/diazabutadiene system

[structure: see text]. A Pd(OAc)2/diazabutadiene system has been developed for the catalytic cross-coupling of aryl halides with arylboronic acids. A combination of the diazabutadiene DAB-Cy (1, N,N'-dicyclohexyl-1,4-dizabutadiene) and Pd(OAc)2 was found to form an excellent catalyst for the Suzuki-Miyaura cross-coupling of various aryl bromides and activated aryl chlorides with arylboronic acids.     

钯催化卤代芳烃的胺化反应研究

钯催化卤代芳烃胺化是形成Car-N的重要方法.配体的发展扩展了底物的适用范围, 提高了反应的选择性,实现了廉价易得的氯代芳烃的胺化,弱碱的使用提高了官能团的兼 容性,因此Pd催化芳胺化广泛应用于合成芳胺类化合物.本文以卤代芳烃为线索,对钯催化偶联胺化反应的研究进展进行了综述和展望.     

A new palladium complex supported on magnetic nanoparticles and applied as an catalyst in amination of aryl halides,Heck and Suzuki reactions

A simple, efficient and less expensive protocol for the phosphine-free C–C coupling reactions and synthesis of anilines in the presence of 2-aminobenzamide complex of palladium supported on Fe₃O₄ magnetic nanoparticles (Pd(0)-ABA-Fe₃O₄) has been reported. The Suzuki reaction was carried out in water or PEG using phenylboronic acid (PhB(OH)₂) or sodium tetraphenyl borate (NaBPh₄). Pd(0)-ABA-Fe₃O₄ has been found promising for Heck reaction of butyl acrylate, styrene or acrylonitrile with aryl halides (including Cl, Br and I). Also, Pd(0)-ABA-Fe₃O₄ has been found as efficient catalyst for the amination of aryl halides using aqueous ammonia. The products have been obtained in short reaction times and high yields. The catalyst was easily separated using an external magnet from the reaction mixture and reused for several runs without significant loss of its catalytic efficiency or palladium leaching. The leaching of catalyst has been examined by hot filtration and ICP-OES technique. The nanomagnetical catalyst was characterized by FTIR, TGA, XRD, VSM, TEM, SEM, EDS, DLS and ICP-OES techniques.     

Application of a new bicyclic triaminophosphine ligand in Pd-catalyzed Buchwald-Hartwig amination reactions of aryl chlorides, bromides, and iodides

The new bicyclic triaminophosphine ligand P(i-BuNCH2)3CMe (3) has been synthesized in three steps from commercially available materials and its efficacy in palladium-catalyzed reactions of aryl halides with an array of amines has been demonstrated. Electron-poor, electron-neutral, and electron-rich aryl bromides, chlorides, and iodides participated in the process. The reactions encompassed aromatic amines (primary or secondary) and secondary amines (cyclic or acyclic). It has also been shown that the weak base Cs2CO3 can be employed with ligand 3, allowing a variety of functionalized substrates (e.g., those containing esters and nitro groups) to be utilized in our amination protocols. This ligand provides a remarkably general, efficient, and mild palladium catalyst for aryl iodide amination. Although 3 is slightly air and moisture sensitive, easy procedures can be adopted that avoid the need of a glovebox. Comparisons of the efficacy of 3 in these reactions with that of the proazaphosphatrane P(i-BuNCH2CH2)3N (2) reveal that in addition to the opportunity for transannulation in 2 (but not in 3), other significant stereoelectronic contrasts exist between these two ligands which help account for differences in the activities of the Pd/2 and Pd/3 catalytic systems.     

Cascade alkenyl amination/Heck reaction promoted by a bifunctional palladium catalyst: a novel one-pot synthesis of indoles from o-haloanilines and alkenyl halides

A novel approach for the synthesis of the important indole ring is described. Indoles are obtained from o-bromoanilines and alkenyl halides in a Pd-catalyzed cascade process that involves an alkenyl amination followed by an intramolecular Heck reaction. The overall process represents the first example of the participation of alkenyl amination reactions in Pd-catalyzed cascade reactions. Initially, the relative reactivity of aryl and alkenyl bromides and chlorides towards Pd-catalyzed amination was investigated. Competition experiments were carried out in the presence of primary and secondary amines, and these revealed the reactivity order alkenyl bromides > aryl bromides > alkenyl chlorides > aryl chlorides, as well as very high chemoselectivity; the more reactive halide was always favored. Thereafter, optimized reaction conditions for the sequential alkenyl amination/Heck cyclization to give indoles were investigated with the model reaction of o-bromoaniline with alpha-bromostyrene. An extensive screening of ligands, bases, and reaction conditions revealed that the [Pd2(dba)3]/DavePhos, NaOtBu, toluene combination at 100 degrees C were the optimized reaction conditions to carry out the cascade process (dba=dibenzylideneacetone, DavePhos=2-dicyclohexylphosphino-2'-N,N-dimethylaminobiphenyl). The reaction proceeds with aryl, alkyl, and functionalized substitutents in both starting reactants. The cyclization was also studied with N-substituted o-bromoanilines (which would give rise to N-substituted indoles); however, in this case, indole formation occurred only with 1-substituted-2-bromoalkenes. Finally, the application of this methodology to o-chloroanilines required further optimization. Although the catalyst based on DavePhos failed to promote the cascade process, a catalytic combination based on [Pd2(dba)3]/X-Phos promoted the formation of the indole ring also from the less reactive chloroanilines.     

Rapid room temperature Buchwald-Hartwig and Suzuki-Miyaura couplings of heteroaromatic compounds employing low catalyst loadings

The use of second-generation [(NHC)Pd(R-allyl)Cl] complexes for Suzuki-Miyaura and Buchwald-Hartwig cross-coupling reactions involving heteroaromatic halides at room temperature is reported. The first examples of room temperature Suzuki-Miyaura cross-coupling of deactivated aryl chlorides with alkenyl boronic acids are also disclosed. Terminal substitution at the allyl moiety of the palladium complex facilitates its activation at room temperature leading to very active catalytic species enabling the present catalytic transformations to be performed rapidly using very mild reaction conditions. Catalyst loadings can be as low as 10 ppm for the Buchwald-Hartwig aryl amination and 50 ppm for the Suzuki-Miyaura reaction.     

Aqueous hydroxide as a base for palladium-catalyzed amination of aryl chlorides and bromides

The amination of aryl halides in the presence of inexpensive and air-stable alkali metal hydroxide bases and Pd[P(t-Bu)3]2 as catalyst gave arylamines in high yields. The reactions were conducted with a catalytic amount of cetyltrimethylammonium bromide as phase-transfer agent and either aqueous hydroxide or solid hydroxide in the presence of water. This combination of alkali metal hydroxide base, H2O, and the ammonium salt performed as well as NaO-t-Bu in the amination of p-chlorotoluene with dibutylamine. Hydroxide base was suitable for reactions of a wide range of aryl chlorides and bromides with aliphatic and aromatic amines. Some functional groups that were intolerant of tert-butoxide base, such as esters, enolizable ketones, nitriles, and nitro groups, were tolerated by the combination of hydroxide base, H2O, and cetyltrimethylammonium bromide in toluene solvent.     

Pd(0)‐Catalyzed Tandem One‐Pot Reaction of Biphenyl Ketones/Aldehydes to the Corresponding Di‐substituted Aryl Olefins

Synthesis of di‐substituted aryl olefins via a Pd(0)‐catalyzed cross‐coupling reaction of biphenyl ketones/aldehydes, tosylhydrazide, and aryl bromides (or benzyl halides) was developed. This methodology was achieved by one‐pot two‐step reactions involving the preparation of N ‐tosylhydrazones by reacting tosylhydrazide with biphenyl ketones/aldehydes, followed by coupling with aryl bromides (or benzyl halides) in the presence of Pd(PPh₃ )₄ and lithium t ‐butoxide to produce various di‐substituted aryl olefins in moderate to good yields.     

Aryl transfer between Pd(II) centers or Pd(IV) intermediates in Pd-catalyzed domino reactions

A computational study has been performed to determine the mechanism of the key steps of Pd-catalyzed domino reactions in which C(sp2)-C(sp2) are formed from aryl and alkenyl halides. DFT calculations were done on model complexes of the proposed intermediates, with PH3 and H2O as ancillary ligands, to explore two possible mechanisms: the oxidative addition of aryl or alkenyl halides to palladacycles to give Pd(IV) intermediates, and the transmetalation-type reaction of aryl or alkenyl ligands between two Pd(II) centers, a palladacycle, and a Pd(II) complex formed by oxidative addition of aryl or alkenyl halides to Pd0. We have shown that oxidative addition of iodoethylene to Pd0 precursors is more favorable than oxidative addition to Pd(II) palladacycles, whereas transmetalation-type reactions between Pd(II) complexes are facile. Similar results were obtained with iodobenzene instead of iodoethylene and formamide as the ancillary ligand. These results suggest that Pd(IV) intermediates are not involved in these reactions.     

The Buchwald–Hartwig Amination After 25 Years

The Pd‐catalyzed coupling of aryl (pseudo)halides and amines is one of the most powerful approaches for the formation of C(sp²)?N bonds. The pioneering reports from Migita and subsequently Buchwald and Hartwig on the coupling of aminostannanes and aryl bromides rapidly evolved into general and practical tin‐free protocols with broad substrate scope, which led to the establishment of what is now known as the Buchwald–Hartwig amination. This Minireview summarizes the evolution of this cross‐coupling reaction over the course of the past 25 years and illustrates some of the most recent applications of this well‐established methodology.     

BippyPhos: A Single Ligand With Unprecedented Scope in the Buchwald–Hartwig Amination of (Hetero)aryl Chlorides

Over the past two decades, considerable attention has been given to the development of new ligands for the palladium‐catalyzed arylation of amines and related NH‐containing substrates (i.e., Buchwald–Hartwig amination). The generation of structurally diverse ligands, by research groups in both academia and industry, has facilitated the accommodation of sterically and electronically divergent substrates including ammonia, hydrazine, amines, amides, and NH heterocycles. Despite these achievements, problems with catalyst generality persist and access to multiple ligands is necessary to accommodate all of these NH‐containing substrates. In our quest to address this significant limitation we identified the BippyPhos/[Pd(cinnamyl)Cl]₂ catalyst system as being capable of catalyzing the amination of a variety of functionalized (hetero)aryl chlorides, as well as bromides and tosylates, at moderate to low catalyst loadings. The successful transformations described herein include primary and secondary amines, NH heterocycles, amides, ammonia and hydrazine, thus demonstrating the largest scope in the NH‐containing coupling partner reported for a single Pd/ligand catalyst system. We also established BippyPhos/[Pd(cinnamyl)Cl]₂ as exhibiting the broadest demonstrated substrate scope for metal‐catalyzed cross‐coupling of (hetero)aryl chlorides with NH indoles. Furthermore, the remarkable ability of BippyPhos/[Pd(cinnamyl)Cl]₂ to catalyze both the selective monoarylation of ammonia and the N‐arylation of indoles was exploited in the development of a new one‐pot, two‐step synthesis of N‐aryl heterocycles from ammonia, ortho‐alkynylhalo(hetero)arenes and (hetero) aryl halides through tandem N‐arylation/hydroamination reactions. Although the scope in the NH‐containing coupling partner is broad, BippyPhos/[Pd(cinnamyl)Cl]₂ also displays a marked selectivity profile that was exploited in the chemoselective monoarylation of substrates featuring two chemically distinct NH‐containing moieties.     

Ligand free open air copper(II) mediated aryl formamidation and amination of aryl halides

A simple synthetic procedure for direct formamidation and amination of aryl halides mediated by copper(II) salts was developed in open air, without an external ligand in formamide with potassium carbonate as a base. This approach is particularly efficient when electron active aryl halides are used as substrates. In these cases almost quantitative formamidation was observed.     

Synthetic,structural, and mechanistic studies on the oxidative addition of aromatic chlorides to a palladium (N-heterocyclic carbene) complex: relevance to catalytic amination

The oxidative addition products trans-[Pd(NHC)(2)(Ar)Cl] (NHC = cyclo-C[N(t)BuCH](2); Ar = Me-4-C(6)H(4), MeO-4-C(6)H(4), CO(2)Me-4-C(6)H(4)) have been isolated in good yields from the reactions of ArCl with the amination precatalyst [Pd(NHC)(2)] and structurally characterized. The former undergo reversible dissociation of one NHC ligand at elevated temperatures, and a value of 25.57 kcal mol(-1) has been determined for the Pd-NHC dissociation enthalpy in the case where Ar = Me-4-C(6)H(4). Detailed kinetic studies have established that the oxidative addition reactions proceed by a dissociative mechanism. Rate data for the oxidation addition of Me-4-C(6)H(4)Cl to [Pd(NHC)(2)] compared to that obtained for the [Pd(NHC)(2)]-catalyzed coupling of morpholine with 4-chlorotoluene are consistent with a rate-determining oxidative addition in the catalytic amination reaction. The relative rates of oxidative addition of the three aryl chlorides to [Pd(NHC)(2)] (CO(2)Me-4-C(6)H(4)Cl > Me-4-C(6)H(4)Cl > MeO-4-C(6)H(4)Cl) reflect the electronic nature of the substituents and also parallel observed trends in coupling efficiency for these aryl halides in aminations.