Chiral separation abilities of homogeneously synthesized cellulose 3,5-dimethylphenylcarbamates: Influences of degree of substitution and molecular weight

A series of cellulose 3,5-dimethylphenylcarbamates(CDMPCs) with different degrees of substitution(DS) and degrees of polymerization(DP) were homogeneously synthesized in 1-allyl-3-methylimidazolium chloride(Amim Cl). Then, the CDMPCs were coated on silica gel and used as chiral stationary phases(CSPs), and their chiral recognition abilities for seven racemates were evaluated by high performance liquid chromatography. The results showed that DS and DP of CDMPCs had a great influence on chiral recognition abilities of the CSPs. The CSPs with the DS ≈ 1 gives a low chiral recognition to most racemates. On the contrast, the CSPs with the DS ? 2 exhibited high chiral separation abilities. For example, six racemates could be separated on the CSP with CDMPC of DS ≈ 2(CSP-2). Especially, for the enantioseparation of 1-(2-naphthyl) ethanol and Tr?ger's base, CSP-2 gave the highest separation ability in all of CSPs. On the other hand, when the DP of cellulose was in a range from 39 to 220, the chiral separation abilities of CDMPCs increased as the DP increased. This work demonstrates that the structure of cellulose esters such as DS and DP has important effect on their chiral separation ability, and therefore provides a practical method to design and prepare desirable CSPs for different racemates.     

Preparation and Enantioseparation Property of Chiral Stationary Phases Based on Cellulose Tris(3,5-dimethylbenzoate)——A New Way to Prepare Polysaccharide-coating Type Chiral Stationary Phases

A new method to prepare polysaccharide-coating type chiral stationary phases （CSPs） was developed in this work. As a typical example, naked silica gel was coated by cellulose, which was then derivatized with 3,5-dimethylbenzoyl chloride to afford cellulose tris（3,5-dimethylbenzoate）-silica gel （CTDBS） complex. The silanols on CTDBS were end-capped with 3- aminopropyltriethoxysilane to obtain CSP 1. The amino groups on CSP 1 were further end-capped with 3,5-dimethylbenzoyl chloride to give CSP 2. The silanols on CTDBS were end-capped with methyltrimethoxysilane to yield CSP 3. CSPs 1-3 were characterized by FTIR, solid-state 13C-NMR and elemental analysis. The enantioseparation abilities of CSPs 1-3 were evaluated with structurally various chiral analytes. The enantioseparation results demonstrated that the end-capping moieties on CSPs 1 and 2 significantly affected enantioseparation. In addition, the effect of the structures of chiral analytes and end- capping moieties on the retention factors and the resolutions was discussed.     

PYRIDINATION OF POLY（VINYL CHLORIDE） via A HOMOLYTIC PATHWAY

PVC was subjected to a chemical modification aiming at replacing the chlorine atoms by pyridine groups via a homolytic route. Pyridine groups were peculiarly affixed to the PVC matrix via a carbon-carbon bond rather than a carbon-nitrogen one. PVC was first iodinated using the Conant-Finkelstein reaction, followed by the application of the homolytic conditions of Minisci to generate pyridinated PVC with a varying degree of substitution. The extent of substitution was not high; the reaction on 30% iodinated PVC afforded a degree of modification no greater than 3%.     

Preparation and Characterization of Titania-grafted Poly（styrene-divinybenzene） Nanocomposite Microspheres

Titania-grafted poly（styrene-divinylbenzene）（TiO2/PSt-DVB） nanocomposite microspheres were prepared by an open-ring reaction and radical grafting copolymerization method. The TiO2 nanoparticles were first modified by attachment of epoxy groups to their surfaces to provide reactive groups that could covalently bond to the polymer （PSt-DVB） microspheres. The nanocomposite obtained was characterized by FTIR, SEM, XRD, and TGA analyses as well as UV-Vis spectrophotometry. The results indicated that the TiO2 nanoparticles were uniformly grafted onto the surface of the polymer microsphere producing grain sizes of about 5―10 μm. The modified TiO2 showed better UV absorbing property than the unmodified form, and the nanocomposite also retained the same UV absorbing property as the free modified TiO2 nanoparticle.     

COVALENTLY BONDING CHIRAL POLYURETHANE ON AMINATED SILICA GEL： A NEW STRATEGY TO PREPARE CHIRAL STATIONARY PHASE FOR HIGH PERFORMANCE LIQUID CHROMATOGRAPHY

Two polyurethanes of different molecular weights were prepared by the copolymerization of phenyl diisocyanate and diisopropyl tartrate. The polyurethanes having terminal isocyanate groups were reacted with 3-aminopropyl silica gel to afford two chiral stationary phases. The Mn of the two polyurethanes were 4057 g/mol and 6442 g/mol. The polyurethanes and the corresponding chiral stationary phases were characterized by FT-IR, 1H NMR and elemental analysis. The loading capacities of the polyurethanes on silica gel were 0.68 mmol units/g and 0.61 mmol units/g, respectively. The separation performance and the influence of additives, triethylamine and trichloroacetic acid, on the separation of chiral compounds were investigated by HPLC. The chiral stationary phase prepared from polyurethane with Mn of 4057 g/mol demonstrated better enantioseparation capability than that with Mn of 6442 g/mol. Additionally, it was found that the addition of triethylamine and trichloroacetic acid in the mobile phases significantly improved the enantioseparation for these two chiral stationary phases.     

Study of chiral recognition mechanism of O,O-diethyl (p-methylbenzenesulfonamindo)-aryl(alkyl)-methylphosphonates by HPLC with a series of CSPs

Five chiral stationary phases (CSPs) were used to separate the enantiomers of a series of O,O-diethyl (p-methyl-benzenesulfonamindo)- aryl(alkyl)-methylphosphonates. A chiral recognition mechanism was presented to explain the resolution of these compounds. Results show that CSP with strong π-acceptor 3,5-dinitrobenzoyl group and high steric hindrance has the best resolution ability in chiral separation of O,O-diethyi (p-methyl-benzenesulfonamindo)- aryl(alkyl)-methylphosphonates. When a CSP has just a strong π-acceptor 3,5-dinitrobenzoyl or high steric hindrance it does not have good chiral resolution ability. The chiral recognition is more difficult when the CSP has more than one asymmetric center.     

Structure controlling and adsorption application of polyethersulfone porous microspheres prepared via electrospraying

The focus of this work is to control the structure of electrosprayed polymer microspheres and then study the effect of different structures on the microspheres＇ adsorption properties. Scanning electron microscopy （SEM） coupled with image analysis software was employed to evaluate the size distributions and the structure of microspheres. According to the observation and analysis results, two types of polyethersulfone （PES） porous microspheres （perfect sphere-shaped and collapsed） were prepared via electrospraying technology by adjusting the solvent and polymer molecular weight. The porous PES microspheres can remove bisphenol A （BPA） from its aqueous solution effectively. Compared with collapsed microspheres, the rough microspheres had much higher specific surface area and better mobility in the BPA aqueous solution, so it showed a better adsorption capacity than that of collapsed microspheres. The solvent evaporation rate and the occurrence rate of phase separation significantly affect the structure and morphology of microspheres.     

基于(R)-1,1’-联萘硫脲的手性荧光受体: 合成与手性识别

Two chiral fluorescent receptors 1 and 2 based on (R)-1,1‘-binaphthylene-2,2‘-bisthiourea were synthesized, and their chiral recognition properties for enantiomeric mandelate anions were studied by fluorescence spectra and molecular modeling. Addition of the L- and D-mandelate anions caused considerable fluorescent increases in the fluorescent intensity of the host solution. The L-enantiomer can enhance the fluorescence intensity of 1 much more than the D-enantiomer can do, and 1 shows a better enantioselective recognition ability than 2.     

Preparation and chromatographic characteristics of a novel 2,6-dimethyl-β-CD bonded HPLC chiral stationary phase

A novel 2,6-dimethyl-b-CD bonded and silica based HPLC chiral stationary phase（CSP） was prepared.The diphenylmethane diisocyanate（MDI） was applied for the first time in the immobilization of 2,6-dimethyl-b-CD onto the surface of aminized silica gel under mild conditions. The composite materials obtained were used as the CSP for chiral separation processes and this kind of CSP exhibits good enantioselectivity for a variety of chiral compounds under reversed-phase conditions.     

a,a,a,b-ZnT(o-BocThr)APP对咪唑衍生物和氨基酸酯的分子识别研究

Molecular Recognition of α,α,α,β-ZnT（o-BocThr）APP （1） toward a series of imidazole derivatives and amino acid esters was investigated. Association constants were determined in chloroform by means of UV-Vis titration method. The association constants of 1 with imidazole derivatives are larger than those of 1 with amino acid esters. 1H NMR spectra were investigated to describe the binding mode of the recognition system, showing that all the protons of the guests were shifted to upfield. The circular dichroism spectra of 1-L-/D-ValOMe showed a split cotton effect in Soret region, while those of 1-L-/D-PheOMe showed no split cotton effect. Molecular modeling was performed to understand chiral recognition on a molecular level. Quantum chemical calculation was carried out based on the stable conformations of these recognition systems, which gave a reasonable explanation for the behavior of molecular recognition. The results indicated that the conformation of 1-D-ValOMe was more stable than that of 1-L-ValOMe.     

Preparation and chiral recognition ability of crosslinked beads of polysaccharide derivatives

The spherical beads consisting of cellulose 3,5-dimethylphenylcarbamate with partial hydroxyl groups were prepared to be used as chiral packing materials (CPMs) for HPLC. The beads were obtained without using macroporous silica gel, which is usually used as the support of the CPMs based on the polysaccharide derivatives. After the crosslinking in the bead with diisocyanates, such as 4,4'-diphenylmethane diisocyanate (MDI), 4,4'-dibenzyl diisocyanate (DBDI), tolylene-2,4-diisocyanate (TDI), and m-xylylene diisocyanate (XDI), the obtained beads were packed into an HPLC column. As the content of the hydroxyl groups of the cellulose derivatives decreased, the obtained CPM exhibited a higher chiral recognition ability. The beads possessed a higher loading capacity than the CPM prepared by coating the cellulose derivative on silica gel. The crosslinked beads could be used with the eluent containing chloroform. The amylose derivative beads were also prepared as a CPM for chiral HPLC.     

Improved preparation of chiral stationary phases via immobilization of polysaccharide derivative‐based selectors using diisocyanates

The classical method for the preparation of immobilized polysaccharide‐based chiral stationary phases (CSPs) with a diisocyanate was improved. Cellulose or amylose was directly coated onto 3‐aminopropyl silica gel after it was dissolved in a mixture of N,N‐dimethylacetamide, LiCl, and pyridine, then immobilized onto silica gel with a diisocyanate, and finally allowed to react with an excess of corresponding isocyanate. Four polysaccharide derivatives, 3,5‐dimethylphenylcarbamate and 3,5‐dichlorophenylcarbamate of cellulose, and 3,5‐dimethylphenylcarbamate and 5‐chloro‐2‐methylphenylcarbamate of amylose, were immobilized onto silica gel utilizing this method. Compared with the classical diisocyanate method, the improved procedure avoided the derivatization and regeneration of 6‐hydroxyl groups of cellulose and amylose, and thus showed an advantage for simple and economical preparation. The relationships among the amount of diisocyanate used, immobilization efficiency, and enantioseparation on the cellulose‐based CSPs were investigated. Also, the solvent durability of the obtained CSPs was examined with eluents containing chloroform or THF. By utilizing these eluents, the chiral recognition abilities of the obtained CSPs for some of the tested racemates were improved.     

Development of chiral stationary phases consisting of low-molecular-weight cellulose derivatives covalently bonded to silica gel

We prepared chiral supports whose chiral stationary phase (CSP), consisting of a low-molecular-weight cellulose derivative (degree ofpolymerization: 15), is covalently bonded to silica gel. The cellulose used asthe base material of the CSP was pre-hydrolysed with phosphoric acid before thecoupling reaction to unite a reducing terminal in the cellulose and anaminopropyl group on the surface of silanized silica. After substitutinghydroxyl groups in cellulose by using 3,5-dichlorophenyl isocyanate or phenylisocyanate, we tested the CSP thus obtained for its performance in chiralrecognition and found a wide range of chiral discrimination ability. We alsoconfirmed that an elution using strong solvents as a mobile phasecould be achieved, which is difficult for the coated-type CSPs because themobile phase may dissolve the CSP. However, more enantiomeric mixtures showedlarger selectivity factors () when eluted on the coated-type CSPs thanonthe covalently bonded CSPs. A coated-type CSP consisting of thelow-molecular-weight cellulose phenylcarbamate, prepared as a control CSPsample, showed comparable performance with the commercial coated-type column(CHIRALCEL® OC), so the slightly poorer performance ofthe chemically bonded CSPs may be explained by the difficulty of the polymerconsisting of the CSPs in taking an optimal supermolecular structure requiredfor chiral recognition due to the fixation to the silica gel. The lowdegreeof polymerization may have an additional effect.     

多糖类氨基甲酸酯衍生物的区域选择性合成及其手性识别

通过糖单元6-位羟基的保护和去保护,运用区域选择性方法合成了6种新型多糖类氨基甲酸酯衍生物,分别为纤维素/直链淀粉-[2,3-二(3,5-二甲基苯基)-6-环己基]氨基甲酸酯、[2,3-二(3,5-二氯苯基)-6-环己基]氨基甲酸酯及[2,3-二(4-氯苯基)-6-环己基]氨基甲酸酯,并将其涂敷在氨丙基硅胶的表面制备HPLC手性固定相.利用1H-NMR与FTIR光谱技术对所合成衍生物进行结构表征和分析,并应用HPLC法评价其对于9种手性化合物的手性识别能力.通过与以手性识别能力高而著称且含有单一取代基的纤维素/直链淀粉-三(3,5-二甲基苯基氨基甲酸酯)等手性固定相的对比分析表明,所合成新型手性固定相对于某些对映体显示出更优的手性识别能力.由进一步分析表明,糖单元2-、3-和6-位取代基的性能对于纤维素和直链淀粉氨基甲酸酯类衍生物的手性识别能力均具有较大影响.     

The Resolution of Enantiomeric Ibuprofen on Chiral Stationary Phases Containing N-Arylcarbamoyl Derivatives of Phenylglycine

A series of fourteen anilide derivatives of ibuprofen were resolved on six chiral stationary phases (CSPs) derived from N-arylcarbamoyl derivatives of (S)-phenylglycine. Excellent chiral resolutions were achieved on these CSPs. The ionic-type CSPs showed better chiral recognition abilities than the corresponding covalent-type CSPs, and the CSP bearing two chiral centers has better performance than the CSPs bearing only one chiral center. The highest separation factor was achieved using the ionic-type CSP bearing two chiral centers for the resolution of the 3,5-dinitroanilide derivative of ibuprofen. This result is better than those reported in literature for the resolution of ibuprofen on the CSPs derived from amino acids, According to the chromatographic behaviors, the hydrogen bonding interaction, the π-π interactions provided by the phenyl groups in CSPs bearing one chiral center, and the phenylethylcarbamoyl moiety in CSPs bearing two chiral centers dominate the chiral recognition.     

淀粉及纤维素三(3-三氟甲基苯基氨基甲酸酯)手性固定相的制备及其性能评价

为了扩展多糖类手性固定相的种类,制备了基于淀粉及纤维素三(3-三氟甲基苯基氨基甲酸酯)的涂敷型手性固定相,以正己烷-异丙醇混合液为流动相,对8种手性化合物进行了高效液相色谱拆分。研究表明: 虽然与应用最广泛的分别以淀粉及纤维素三(3,5-二甲基苯基氨基甲酸酯)为手性选择因子的商品化手性柱Chiralpak AD和Chiralcel OD相比,所制备的手性固定相的手性分离能力较低,但纤维素三(3-三氟甲基苯基氨基甲酸酯)手性固定相显示出特异的手性识别能力,一些手性化合物在此固定相上得到了比在Chiracel OD上更好的分离;所制备的手性固定相的手性识别能力随流动相中异丙醇含量的降低而变好,当流动相中正己烷与异丙醇的体积比为95:5时所制备的手性固定相显示出相对较高的手性识别能力;总体来说,淀粉三(3-三氟甲基苯基氨基甲酸酯)手性固定相的手性识别能力稍强于纤维素三(3-三氟甲基苯基氨基甲酸酯)手性固定相,同时两种手性固定相的手性识别能力具有一定的互补性。     

Preparation and chiral recognition ability of cellulose 3,5-dimethylphenylcarbamate immobilized on silica gel through radical polymerization

Polysaccharide-immobilized chiral stationary phases (CSPs) were prepared by the polymerization of cellulose 3,5-dimethylphenylcarbamate, having a polymerizable vinyl group, such as 4-vinylphenylcarbamate or 2-methacryloyloxyethylcarbamate, at the 6-position, with a vinyl monomer, such as styrene, isoprene, t-butyl acrylate, or t-butyl methacrylate, on silica gel under various conditions. Their chiral recognition abilities were then evaluated with high-performance liquid chromatography. The immobilized cellulose 3,5-dimethylphenylcarbamate remained on the silica gel even if washed with tetrahydrofuran, which could dissolve the cellulose derivative. The chiral recognition abilities of the immobilized CSPs were similar to those of the coated CSPs when the vinyl monomer content was low. The chiral recognition abilities of the obtained immobilized CSPs slightly depended on the vinyl monomers. The immobilization of the cellulose derivatives was more efficiently attained on the silica gel modified with a vinyl compound. The cellulose derivatives, randomly having a vinyl group at the 2-, 3-, or 6-position of the glucose unit, were prepared by a one-pot reaction. The immobilization efficiency of these derivatives was slightly lower than that of the derivative with the vinyl group at the 6-position. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3703–3712, 2003     

Preparation and enantioseparation characteristics of three chiral stationary phases based on modified β-cyclodextrin for liquid chromatography

In order to study the effect of the nature and the length of the spacer, three mixed 10-undecenoate/phenylcarbamate derivatives of β-cyclodextrin have been prepared and linked to allylsilica gel by means of a radical reaction. The chiral recognition ability of the resulting materials, when used as liquid chromatography chiral stationary phases (CSPs), was evaluated using heptane and either 2-propanol or chloroform as organic mobile-phase modifiers. A large variety of racemic compounds have been separated successfully on these CSPs (mainly pharmaceuticals and herbicides). Optimization of these separations was discussed in terms of mobile-phase composition and structural patterns of the injected analytes. The efficiencies of the three prepared materials were compared to those of previously described perphenylated-β-cyclodextrin column and to analogous cellulose derivative-based CSPs. Schematic illustration of the b-cyclodextrin/mandelic acid inclusion complex     

Effect of Chiral Additives in the Preparation of Cellulose-Based Chiral Stationary Phases in HPLC, and Effect on Enantiomer Resolution

Chiral stationary phases (CSPs) for high-performance liquid chromatographic (HPLC) have been prepared by coating silica gel with cellulose tribenzoate or cellulose trisphenylcarbamate. The effect of chiral additives on preparation of the CSPs was studied with (+)-l-mandelic acid, (−)-2-phenyl-1-propanol, (+)-1-phenyl-1,2-ethanediol and (−)-1-(1-naphthyl)ethanol as chiral additives for cellulose tribenzoate and (−)-2-phenyl-1-propanol and (+)-phenylsuccinic acid as chiral additives for cellulose trisphenylcarbamate. The results showed that chiral recognition by these stationary phases was increased in comparison with the original CSPs, especially the resolution (R _S) obtained. The method can be used to improve the efficiency of enantiomer separation by silica gel stationary phases coated with polymers.     

Synthesis of chemically bonded cellulose trisphenylcarbamate chiral stationary phases for enantiomeric separation

Cellulose trisphenylcarbamate is regioselectively bonded to 3-aminopropyl silica gel and underivatized silica gel, respectively, at the 6-position of the primary hydroxyl group on the glucose unit of cellulose with 4,4'-diphenylmethane diisocyanate (DPDI) as a spacer. Enantioseparations are evaluated on these prepared chiral stationary phases (CSPs) with several organic acids as the modifiers in the mobile phase by high-performance liquid chromatography. The influence of the amount of DPDI used on chiral resolution is investigated. Also, the corresponding coated-type phase is also prepared for the aim of comparison. It is observed that the bonded-type phase shows a lower chiral recognition power but a better column efficiency than the coated-type phase under the liquid chromatographic mobile phase with hexane-alcohol. However, the bonded-type CSPs are compatible with a wider number of solvents such as tetrahydrofuran (THF) or chloroform, which generally result in the solubility or swelling of the cellulose derivatives on the coated-type CSPs. The results obtained from this study indicate that the bonded-type CSP may provide complementary enantioselectivity over the coated-type phase by adopting THF as a component in the mobile phase.