水溶性的高荧光CdTe/CdSeⅡ型核壳量子点的合成与表征

用L-半胱氨酸(L-cysteine)作为稳定剂,以制备的CdTe量子点为核模板,水相合成了具有近红外发光的Ⅱ型核壳CdTe/CdSe半导体量子点。实验考察了合成温度,核模板的尺寸和组分比等因素对合成高质量的CdTe/CdSe量子点的影响。用紫外-可见吸收和荧光光谱研究了合成的量子点的光学性质。在优化的合成条件下,荧光发射光谱在586～753nm范围连续可调,荧光量子产率高达68%;通过X-射线衍射(XRD),X射线光电子能谱(XPS)和透射电镜(TEM)对合成的Ⅱ型核壳CdTe/CdSe量子点进行了结构和形貌表征。     

水热法合成AgInS2/ZnS核/壳结构量子点及其荧光性能

以硫脲为硫源,采用谷胱甘肽(GSH)和柠檬酸钠(SC)为配体,通过水热法制备了水溶性AgInS2/ZnS(AIS/ZnS)核/壳结构量子点。系统研究了反应温度和配体用量对量子点的合成及其荧光性能的影响。采用X射线衍射(XRD)、透射电子显微镜(TEM)、紫外可见吸收光谱(UV-Vis)和光致发光光谱(PL)分别对量子点的物相、形貌和光学性能进行了表征,并考察了量子点的稳定性。实验结果表明,随着反应温度从70℃升高至90℃,促进了ZnS壳层的形成,有效地钝化了量子点的表面缺陷,获得的AIS/ZnS核/壳量子点的发光强度显著提高,发光峰位从600 nm蓝移至580 nm。配体的添加可以有效地平衡Zn^2+的化学反应活性,减缓ZnS壳层的生长,抑制核壳界面缺陷的形成,还能消除量子点的表面态,当nGSH/nZn^2+=2.0,nSC/nZn^2+=2.5时,AIS/ZnS量子点的荧光性能最佳。此外,AIS/ZnS核/壳结构量子点还具有优异的光学稳定性。     

发光可调Au:ZnCdS合金量子点的水相合成

以巯基丙酸作为配体,在水溶液中合成了发光位置在495~583 nm可调的Au∶Zn Cd S合金量子点,研究了掺杂含量、Zn/Cd比和p H等对量子点光学性质的影响。对预提纯的Au∶Zn Cd S核量子点进行Zn S包覆,量子点表面的缺陷被有效去除,发光效率明显提高。利用X-射线粉末衍射、透射电子显微镜对其结构和形貌进行了表征。     

CdTe/CdS核壳量子点与蛋白质荧光标记

利用连续离子层吸附技术合成了水溶性的CdTe／CdS核壳量子点．通过CdS壳层的包覆,量子点的量子效率由原来的15％（裸核）提高到38％（核壳）,这种核壳结构量子点的化学和光学性质具有更好的稳定性,可以用于生物标记．本文采取共价连接与静电吸附两种方法,实现了量子点的生物标记,电泳技术已证明,应用这种量子点成功地实现了对蛋白质分子的生物标记．通过对量子点与蛋白质偶联前后的荧光光谱分析,发现量子点与蛋白质作用后荧光增强是由于蛋白质对量子点进行了表面修饰,从而降低了表面缺陷引起的非辐射跃迁几率所致．通过共价连接量子点的荧光峰位红移,主要是由于偶极-偶极相互作用引起的;量子点与蛋白质静电吸附作用引起的荧光峰位蓝移主要起因于量子点表面电荷量的降低．     

CdSe包覆层数对水溶性CdTe/CdSe (II型)核壳量子点的光学特性和微观结构的影响

在水相合成的CdTe量子点的体系中通过分批次加入新鲜配制的NaHSe和CdCl2溶液,制备出了CdSe包覆层数不同的CdTe/CdSe核壳量子点,并着重考察了CdSe包覆层数对CdTe/CdSe核壳量子点的光学特性以及微观结构的影响.与CdTe量子点相比,CdSe单层包覆的CdTe/CdSe核壳量子点的吸收峰和荧光发射峰出现明显红移;随着CdSe包覆层数的增多,CdTe/CdSe核壳量子点吸收光谱的覆盖范围向长波方向扩展,荧光发射峰强度逐步下降,荧光寿命大幅延长,体现出Ⅱ型核壳量子点的特征.X射线衍射(XRD)分析表明,随着CdSe包覆层数的增多,CdTe/CdSe核壳量子点的粉末衍射峰由CdTe衍射峰位置逐步向CdSe衍射峰位置靠近.CdTe/CdSe核壳量子点因其延伸到近红外区域的宽吸收特性致使其在太阳电池领域具有重要的应用前景.     

谷胱甘肽稳定水溶性CdTe/ZnTe量子点的制备与表征

用还原型谷胱甘肽(GSH)作为稳定剂, 合成了水溶性的CdTe/ZnTe核壳结构的半导体量子点. 考察了Zn/Cd反应物配比及GSH用量对CdTe/ZnTe量子点的性能影响. 用高分辨透射电子显微镜(HRTEM)和X射线粉末衍射(XRD)光谱对CdTe和CdTe/ZnTe的形貌和晶体结构进行了表征. 荧光光谱结果表明, 核壳结构的CdTe/ZnTe量子点比单一的CdTe量子点具有更高的荧光量子产率和更好的光活化性能.     

模板法控制合成AgInSe2:Zn2+近红外荧光量子点及其生物标记应用※

AgInSe₂ (AISe)量子点具有带隙小、斯托克斯位移大、荧光寿命长且不含重金属有毒元素等特性, 使其在生物医学领域具有重要研究价值. 同时, AISe量子点的光学性质对尺寸和组成具有强烈的依赖关系, 然而传统的直接合成法很难实现对AISe量子点形貌和组分的精准调控, 从而极大限制了其发光效率. 对此, 作者提出了温和条件(75 ℃)下以In₂Se₃:Zn²⁺量子点为模板, 离子交换法控制合成AISe近红外荧光量子点的策略, 所合成的AISe量子点很好地维持了In₂Se₃:Zn²⁺模板的形貌, 进一步通过系统调节Ag/In投料物质的量比控制离子交换程度, AISe量子点的实际Ag/In组分比实现了从0.26~1.09宽范围调节; 最高绝对量子产率可达42.5%, 这一数值远高于通过直接合成法所得到的AISe量子点. 通过稳态、瞬态和低温光谱等手段对不同组分AISe量子点的发光行为进行了系统的光谱学研究, 揭示了其发光机理. 另外, 利用AISe量子点高效的近红外发光和良好的生物安全性, 实现了基于AISe近红外量子点探针的肿瘤细胞靶向成像, 展示出AISe量子点在生物成像和疾病的早期诊疗等领域具有很好的应用潜力.     

CdTe/CdS量子点的Ⅰ-Ⅱ型结构转变与荧光性质

制备了壳层厚度可以精确控制的CdTe/CdS核壳量子点, 利用紫外-可见吸收光谱、光致发光光谱、透射电镜和时间分辨光谱等技术, 分析了CdS壳层厚度对CdTe量子点的荧光量子产率和光谱结构的影响规律. 发现了不同于CdSe/CdS, CdSe/ZnS, CdTe/ZnS等核壳量子点的荧光峰展宽、大幅度红移以及荧光寿命大幅度增加现象. 根据能带的位置关系, 随着CdS厚度的增加, CdTe从Ⅰ型结构逐渐过渡到Ⅱ型核壳结构. 对于Ⅱ型CdTe/CdS核壳量子点, 不仅存在CdTe核区导带电子与价带空穴间的直接复合, 还存在CdS壳层导带电子与CdTe核价带空穴界面处的间接复合, 发光机制的变化导致荧光峰的展宽、明显红移和荧光寿命的增加. 当壳层过厚时, 壳层表面新引入的缺陷会阻碍荧光寿命和量子产率的进一步提高.     

核-壳结构CdSe/ZnS量子点的制备、硫醇修饰及其光学性能

采用高温有机相包覆技术制备了CdSe/ZnS核壳结构量子点材料,考察了包覆量对量子点材料的光学性能的影响,研究了含脂肪链和芳香基的双硫醇分子1,4-苯二甲硫醇和1,8-辛二硫醇对于具有核-壳结构的CdSe/ZnS量子点材料的修饰作用,考察了修饰作用对于量子点的量子效率和荧光强度等光学性能的影响.实验结果表明:随着硫化锌包覆量的增加,量子点的量子效率及其荧光发射强度明显提高;硫醇的修饰能显著增强量子点的发光强度,随着硫醇浓度的增加,其发光性能增强,但是达到一定程度后,光学性能基本不随硫醇浓度的变化而变化.根据固体核磁共振等实验结果推测:硫醇分子可能部分替代了量子点体系中的正三辛基氧膦配体,稳定了量子点体系,对量子点起修饰保护作用,从而提高了量子点的光学性能.     

Ag2Se@Ag2S核壳量子点的室温合成及其近红外荧光性能优化

在Ag₂Se量子点表面生长宽禁带无机壳层以消除表面缺陷是提高其光致发光性能的有效方法.与Ag₂Se相比,Ag₂S带隙更宽,晶格常数相似,是Ag₂Se量子点的理想壳层.然而,室温下精确制备Ag₂Se@Ag₂S核壳量子点仍然是一个挑战.分别采用胶体原子层沉积(c-ALD)法和一锅水相法在室温下合成了油溶性和水溶性的Ag₂Se@Ag₂S核壳量子点,并通过调控配体链长优化了水溶性Ag₂Se@Ag₂S核壳量子点近红外荧光性能.在c-ALD法中,以1-十二硫醇(DDT)包裹的Ag₂Se量子点作为种子,以油胺(OAM)配位的Ag(OAM-Ag)和Na₂S作为壳层前驱体,制备的油溶性Ag₂Se@Ag₂S核壳结构量子点暂无荧光发射,随后尝试通过高温退火但仍无法恢复其荧光发射能力.接着,在一锅水相法中,...     

油溶性CuInS2/ZnS量子点的制备及其温敏性聚丙烯酰胺胶束介导的水相转移

采用非热注法成功制备了高质量的油溶性CuInS2/ZnS核壳量子点,量子点的荧光发射峰在可见光到近红外范围内可调(550～800 nm),且荧光量子产率最高达80%。本文进一步利用具有温敏特性的聚丙烯酰胺胶束作相转移剂,成功地将油溶性的CuInS2/ZnS核壳量子点转移入水相。水相中自组装形成的CuInS2/ZnS量子点-胶束复合物不仅具有良好的荧光性质,而且胶束原有的灵敏的热响应性被保留。这些研究初步表明,无镉的低毒的CuInS2/ZnS量子点可作为纳米胶束的荧光示踪探针。     

油溶性CuInS2/ZnS量子点的制备及其温敏性聚丙烯酰胺胶束介导的水相转移

采用非热注法成功制备了高质量的油溶性CuInS₂/ZnS核壳量子点, 量子点的荧光发射峰在可见光到近红外范围内可调(550~800 nm), 且荧光量子产率最高达80%。本文进一步利用具有温敏特性的聚丙烯酰胺胶束作相转移剂, 成功地将油溶性的CuInS₂/ZnS核壳量子点转移入水相。水相中自组装形成的CuInS₂/ZnS量子点-胶束复合物不仅具有良好的荧光性质, 而且胶束原有的灵敏的热响应性被保留。这些研究初步表明, 无镉的低毒的CuInS₂/ZnS量子点可作为纳米胶束的荧光示踪探针。     

Cu7.2S4量子点玻璃的制备及三阶非线性光学性质

利用溶胶-凝胶法结合气氛控制合成了含Cu7.2S4量子点的玻璃. 通过热重-差热分析仪对干凝胶样品的热分解机制进行了分析, 并利用X射线粉末衍射仪、 X射线光电子能谱、 透射电子显微镜、 X射线能量色散谱)、 高分辨透射电子显微镜及选区电子衍射对 Cu7.2S4量子点在玻璃中的微结构进行了表征, 利用飞秒Z扫描技术研究了材料在800 nm的三阶非线性光学性质. 结果表明, 尺寸在9~21 nm之间的Cu7.2S4纳米晶已经在玻璃中形成, 该玻璃展示出了优异的三阶非线性光学性能, 其三阶非线性光学折射率(γ)、 三阶非线性吸收系数(β)和三阶非线性极化率[X(3)]分别为1.11×10-15 m2/W, 8.91×10-9 m/W和9.56×10-18 m2/V2.     

Optical properties of Ag/CdTe nanocomposite self-organized by electrostatic interaction

Ag/CdTe nanocomposite was prepared via self-organization process by electrostatic interaction between positively charged CdTe quantum dots and negatively charged Ag nanoparticles and examined with respect to their optical properties. The positively charged CdTe quantum dots and negatively charged Ag nanoparticles were synthesized separately by modifying nanoparticles surface with cationic and anionic thiol compounds, respectively. The result showed that the mixing ratio of Ag nanoparticles to CdTe quantum dots is an important parameter for controlling resulting composites. The resulting solution is optically transparent if one component is in excess. Photoluminescence of CdTe quantum dots undergoes considerably quenching if CdTe nanocrystals are in excess and SERS spectra of BVPP absorbed on Ag colloid became stronger if Ag nanoparticles are in excess. Nevertheless, while the ratio is approximately 1, micrometer-sized solid composite is obtained with the elapse of 1h after mixing. SERS spectra for solid composite only exhibit the signals of the CdS nanocrystal which reflected that prolonged refluxing during the synthesis leads to a partial hydrolysis of the thiols and to the incorporation of the sulfur from the thiol molecules into the the growing nanoparticles to form mixed CdTe(S) nanocrystal, similar to CdTe/CdS core/shell structure. From the results, we conclude that optical properties of Ag/CdTe are dependent on the mixing ratio of both nanoparticles.     

Photoluminescence of carbon quantum dots: coarsely adjusted by quantum confinement effects and finely by surface trap states

Photoluminescence (PL) mechanism of carbon quantum dots (CQDs) remains controversial up to now even though a lot of approaches have been made. In order to do that, herein a PL color ladder from blue to near infrared of CQDs with the absolute quantum yields higher than 70% were prepared via a one-pot hydrothermal synthesis route and separated by silica gel column. Time-correlated single photon counting measurements suggest that the electron transition takes in effect in the PL progress of the crystalline core-shell structured CQDs, and the PL properties could be coarsely adjusted by tuning the size of the crystalline carbon core owing to quantum confinement effects, and finely adjusted by changing the surface functional groups consisted shell owing to surface trap states, respectively. Both coarse and fine adjustments of PL, as optical and photoelectrical characterizations and density-functional theory (DFT) calculations have demonstrated, make it possible for top-level design and precise synthesis of new CQDs with specific optical properties.     

In-situ synthesis of stable perovskite quantum dots in core-shell nanofibers via microfluidic electrospinning

Perovskite quantum dots (PQDs) possess remarkable optical properties, such as tunable photoluminescence (PL) emission spectra, narrow full width at half maximum (FWHM) and high PL quantum yield (QY), endowing the PQDs great application prospects. However, the inherent structural instability of PQDs has seriously hindered the application of PQDs in various photoelectric devices. In this work, a microfluidic electrospinning method was used to fabricate color-tunable fluorescent formamidinium lead halogen (FAPbX₃, X = Cl, Br, I) PQDs/polymer core-shell nanofiber films. The core-shell spinning nanofiber not only supplies the interspace for the in-situ formation of PQDs, but also significantly reduces the permeability of moisture and oxygen in the air, which greatly improves the stability of PQDs. After adjusting the composition of precursors, the blue-emissive polystyrene (core) and polymethyl methacrylate (shell) coated FAPbCl₃ QDs (abbreviated as PS/FAPbCl₃/PMMA, hereinafter), green-emissive PS/FAPbBr₃/PMMA and red-emissive PS/FAPbI₃/PMMA nanofiber films were fabricated with the highest PL QY of 82.3%. Moreover, the PS/FAPbBr₃/PMMA nanofiber film exhibits great PL stability under blue light irradiation, long-term storage in the air and water resistance test. Finally, the green- and red-emissive nanofiber films were directly applied as light conversion films to fabricate wide-color-gamut display with the color gamut of 125%, indicating their tremendous potentials in optoelectronic applications.     

Semiconductor quantum dots and metal nanoparticles: syntheses,optical properties,and biological applications

We review the syntheses, optical properties, and biological applications of cadmium selenide (CdSe) and cadmium selenide–zinc sulfide (CdSe–ZnS) quantum dots (QDs) and gold (Au) and silver (Ag) nanoparticles (NPs). Specifically, we selected the syntheses of QDs and Au and Ag NPs in aqueous and organic phases, size- and shape-dependent photoluminescence (PL) of QDs and plasmon of metal NPs, and their bioimaging applications. The PL properties of QDs are discussed with reference to their band gap structure and various electronic transitions, relations of PL and photoactivated PL with surface defects, and blinking of single QDs. Optical properties of Ag and Au NPs are discussed with reference to their size- and shape-dependent surface plasmon bands, electron dynamics and relaxation, and surface-enhanced Raman scattering (SERS). The bioimaging applications are discussed with reference to in vitro and in vivo imaging of live cells, and in vivo imaging of cancers, tumor vasculature, and lymph nodes. Other aspects of the review are in vivo deep tissue imaging, multiphoton excitation, NIR fluorescence and SERS imaging, and toxic effects of NPs and their clearance from the body. Figure Semiconductor quantum dots and metal nanoparticles have extensive applications, e.g., in vitro and in vivo bioimaging Tamitake Itoh and Abdulaziz Anas contributed equally to this article.