The effect of duration of diffusion on Ag diffusion coefficients in YBa2Cu3O7

The Ag diffusion in superconducting YBa₂Cu₃O₇ (YBaCuO) ceramic has been studied over the duration of the diffusion range 5-24 h in the temperature range 700-850 °C by the energy-dispersive X-ray fluorescence (EDXRF) technique. For the excitation of silver atoms, an annular Am-241 radioisotope source (50 mCi) emitting 59.543 keV photons was used. The temperature dependences of silver diffusion coefficients in grains (D₁) and over the grain boundaries in the range 700-850 °C (D₂) are described by the relations D₁=1.4×10⁻² exp[−(1.18±0.10)/kT] and D₂=3.1×10⁻⁴ exp[−(0.87±0.10)/kT].     

Investigation of diode parameters using I-V and C-V characteristics of In/SiO2/p-Si (MIS) Schottky diodes

A study on interface states density distribution and characteristic parameters of the In/SiO₂/p-Si (MIS) capacitor has been made. The thickness of the SiO₂ film obtained from the measurement of the corrected capacitance in the strong accumulation region for MIS Schottky diodes was 220 Å. The diode parameters from the forward bias I-V characteristics such as ideality factor, series resistance and barrier heights were found to be 1.75, 106-112 Ω and 0.592 eV, respectively. The energy distribution of the interface state density D_it was determined from the forward bias I-V characteristics by taking into account the bias dependence of the effective barrier height. The interface state density obtained using the I-V characteristics had an exponential growth, with bias towards the top of the valance band, from 9.44×10¹³ eV⁻¹ cm⁻² in 0.329-E_v eV to 1.11×10¹³ eV⁻¹ cm⁻² in 0.527-E_v eV at room temperature. Furthermore, the values of interface state density D_it obtained by the Hill-Coleman method from the C-V characteristics range from 52.9×10¹³ to 1.11×10¹³ eV⁻¹ cm⁻² at a frequency range of 30kHz-1 MHz. These values of D_it and R_s were responsible for the non-ideal behaviour of I-V and C-V characteristics.     

Non-linear optical properties of silver nanoparticles prepared by hydrogen reduction method

Silver nanoparticles have been prepared using hydrogen gas as the reducing agent for silver nitrate and poly(vinyl pyrrolidone) as the capping agent; the reaction was carried out at 70 °C for 3 h. The size of the nanoparticles was found to be about 20 nm as analyzed using transmission electron micrographs. The X-ray diffraction pattern revealed the face-centered cubic (fcc) structure of silver nanoparticles. The linear absorption of Ag nanoparticles, α, is obtained about 3.71 cm⁻¹. The non-linear refractive indices of silver nanoparticles were defined by the z-scan technique using CW He-Ne laser (λ = 632.8 nm) at different incident intensities. The magnitude of non-linear refractive index (n₂) was measured to be in the order of 10⁻⁷ (cm²/W) with a negative sign. Therefore self-defocusing phenomena is taking placed for Ag nanoparticles.     

The synthesis and kinetic growth of anisotropic silver particles loaded on TiO2 surface by photoelectrochemical reduction method

Silver nanorods with average diameters of 120-230 nm and aspect ratio of 1.7-5.0 were deposited on the surface of TiO₂ films by photoelectrochemical reduction of Ag⁺ to Ag under UV light. The composite films prepared on soda-lime glass substrates were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and atomic force microscopy (AFM). The results show that the TiO₂ film after UV irradiation in AgNO₃ solution is composed of anatase phase TiO₂ and metallic silver with face centered cubic structure. Other compounds cannot be found in the final films. The maximum deposition content of silver particles on the surface of TiO₂ film was obtained with the AgNO₃ concentration of 0.1 M. The kinetic growth rates of silver particles can be controlled by photocatalytic activity of TiO₂ films. The studies suggest that the growth rates of silver particles increase with the enhancement of photocatalytic activity of TiO₂ films. The maximum growth rate of silver particles loaded on TiO₂ films can be up to 0.353 nm min⁻¹ among samples 1#, 2# and 3#, while the corresponding apparent rate constant of TiO₂ is 1.751 × 10⁻³ min⁻¹.     

Studies on fabrication of Ag/Tl2Ba2Ca2Cu3O10/CdSe heterostructures with electrochemical technique

The Ag/Tl₂Ba₂Ca₂Cu₃O₁₀/CdSe heterostructure was fabricated at room temperature by soft electrochemical processing technique for the first time. The formation of the heterostructure with non-diffusive interfaces was confirmed by X-ray diffraction. The crystallite sizes determined for Tl-2223 and CdSe films were 33 nm and 25 nm, respectively. The Tl₂Ba₂Ca₂Cu₃O₁₀ film electrodeposited onto Ag-substrate has shown the superconducting transition temperature T_c at 116.5 K and J_c = 2.1 × 10³ A/cm². These values were found to improve after the deposition of CdSe onto Ag/Tl-2223 films. The effect of red He-Ne laser irradiation on the superconducting properties of heterostructure are studied and discussed at length in this paper.     

Electrical and electrochemical properties of glass-ceramic electrolytes in the systems Li2S-P2S5-P2S3 and Li2S-P2S5-P2O5

Electrical and electrochemical properties of the 70Li₂S·(30 − x)P₂S₅·xP₂S₃ and the 70Li₂S·(30 − x)P₂S₅·xP₂O₅ (mol%) glass-ceramics prepared by the mechanical milling technique were investigated. Glass-ceramics with 1 mol% P₂S₃ and 3 mol% P₂O₅ showed the highest conductivity of 5.4 × 10^− 3 S cm^− 1 and 4.6 × 10^− 3 S cm^− 1, respectively. Moreover, these glass-ceramics showed higher electrochemical stability than the 70Li₂S·30P₂S₅ (mol%) glass-ceramic. From the XRD patterns of the obtained glass-ceramics, trivalent phosphorus and oxygen were incorporated into the Li₇P₃S₁₁ crystal. We therefore presume that the Li₇P₃S₁₁ analogous crystals, which were formed by incorporating trivalent phosphorus and oxygen into the Li₇P₃S₁₁ crystal, improve the electrical and electrochemical properties of the glass-ceramics. An all-solid-state cell using the 70Li₂S·29P₂S₅·1P₂S₃ (mol%) glass-ceramic as solid electrolyte operated under the high current density of 12.7 mA cm^− 2 at the high temperature of 100 °C. The cell showed an excellent cyclability of over 700 cycles without capacity loss.     

Hydrogen peroxide biosensor based on gold nanoparticles/thionine/gold nanoparticles/multi-walled carbon nanotubes-chitosans composite film-modified electrode

In this paper, an amperometric electrochemical biosensor for the detection of hydrogen peroxide (H₂O₂), based on gold nanoparticles (GNPs)/thionine (Thi)/GNPs/multi-walled carbon nanotubes (MWCNTs)-chitosans (Chits) composite film was developed. MWCNTs-Chits homogeneous composite was first dispersed in acetic acid solution and then the GNPs were in situ synthesized at the composite. The mixture was dripped on the glassy carbon electrode (GCE) and then the Thi was deposited by electropolymerization by Au-S or Au-N covalent bond effect and electrostatic adsorption effect as an electron transfer mediator. Finally, the mixture of GNPs and horseradish peroxidase (HRP) was assembled onto the modified electrode by covalent bond. The electrochemical behavior of the modified electrode was investigated by scanning electron microscope, cyclic voltammetry and chronoamperometry. This study introduces the in situ-synthesized GNPs on the other surface of the modified materials in H₂O₂ detection. The linear response range of the biosensor to H₂O₂ concentration was from 5 × 10⁻⁷ mol L⁻¹ to 1.5 × 10⁻³ mol L⁻¹ with a detection limit of 3.75 × 10⁻⁸ mol L⁻¹ (based on S/N = 3).     

Highly active Ce1−xCuxO2 nanocomposite catalysts for the low temperature oxidation of CO

A series of Ce_1−xCu_xO₂ nanocomposite catalysts with various copper contents were synthesized by a simple hydrothermal method at low temperature without any surfactants, using mixed solutions of Cu(II) and Ce(III) nitrates as metal sources. These bimetal oxide nanocomposites were characterized by means of XRD, TEM, HRTEM, EDS, N₂ adsorption, H₂-TPR and XPS. The influence of Cu loading (5-25 mol%) and calcination temperature on the surface area, particle size and catalytic behavior of the nanocomposites have been discussed. The catalytic activity of Ce_1−xCu_xO₂ nanocomposites was investigated using the test of CO oxidation reaction. The optimized performance was achieved for the Ce_0.80Cu_0.20O₂ nanocomposite catalyst, which exhibited superior reaction rate of 11.2 × 10⁻⁴ mmol g⁻¹ s⁻¹ and high turnover frequency of 7.53 × 10⁻² s⁻¹ (1% CO balanced with air at a rate of 40 mL min⁻¹, at 90 °C). No obvious deactivation was observed after six times of catalytic reactions for Ce_0.80Cu_0.20O₂ nanocomposite catalyst.     

Promotion of surface SOx on the selective catalytic reduction of NO by hydrocarbons over Ag/Al2O3

The promotion of sulfur oxides on the selective catalytic reduction (SCR) of NO by hydrocarbons in the presence of a low concentration of sulfur oxides over Ag/Al₂O₃ has been investigated by a flow reaction test and in situ infrared spectroscopy. When the C₃H₆ (or C₁₀H₂₂) + NO + O₂ feed-flow reaction was tested, maximum NO reduction was below 30% over fresh Ag/Al₂O₃. After the addition of SO₂ to the feed flow, conversion increased slightly. Conversion increased further after SO₂ was cut-off from the feed flow. This demonstrated that the increase in NO reduction activity of the catalyst was related to SO_x adsorbed on the catalyst. SO_x adsorbed on the catalytic surface (1375 cm⁻¹) was detected by IR spectroscopy and was stable within the temperature range. NCO species, as an intermediate in NO reduction, on SO_x-adsorbed Ag/Al₂O₃ in a C₃H₆ + NO + O₂ feed flow was observed in in situ IR spectra during the elevation of the reaction temperature from 473 to 673 K, while it was only observed at 673 K on fresh Ag/Al₂O₃ under the same experimental conditions. We suggest that SO_x in low concentrations depressed the combustion of reductants by contaminating hydrocarbon combustion active sites on the catalyst, resulting in an increase in NO reduction efficiency of the reductants.     

High-resolution FTIR spectrum of the ν12 band of ethylene-d (C2H3D)

The infrared absorption spectrum of the ν₁₂ fundamental band of ethylene-d (C₂H₃D) has been recorded with an unapodized resolution of 0.004 cm⁻¹ in the wavenumber range of 1340-1460 cm⁻¹ using the Fourier transform technique. By assigning and fitting a total of 870 infrared transitions using a Watson’s A-reduced Hamiltonian in the I^r representation, three rotational and five quartic centrifugal distortion constants for the upper state (v₁₂ = 1) were determined for the first time. The rms deviation of the fit was 0.00044 cm⁻¹ which is close to the experimental precision of the absorption lines. The A-type ν₁₂ band centred at 1400.762811 ± 0.000041 cm⁻¹was found to be relatively free from local frequency perturbations. The inertial defect Δ₁₂ was found to be 0.20928 ±  0.00002 μŲ.     

Spectral properties of Nd:Ca2Nb2O7 crystal

This paper reports the spectral properties of Nd³⁺:Ca₂Nb₂O₇. The spectral parameters of Nd³⁺ in Nd³⁺:Ca₂Nb₂O₇ crystal have been investigated based on Judd-Ofelt theory. The spectral parameters were obtained. The parameters of line strengths Ω_λ are Ω₂=4.967×10⁻²⁰ cm², Ω₄=5.431×10⁻²⁰ cm², Ω₆=5.693×10⁻²⁰ cm². The radiative lifetime, the fluorescence lifetime and the quantum efficiency are 122 μs, 103 μs and 84.4%, respectively. The fluorescence branch ratios calculated: β₁=0.425, β₂=0.479, β₃=0.091, β₄=0.004. The emission cross section at 1068 nm is 6.204×10⁻²⁰ cm².     

Enhanced photocatalytic activity of TiO2 nano-structured thin film with a silver hierarchical configuration

TiO₂ sol-gels with various Ag/TiO₂ molar ratios from 0 to 0.9% were used to fabricate silver-modified nano-structured TiO₂ thin films using a layer-by-layer dip-coating (LLDC) technique. This technique allows obtaining TiO₂ nano-structured thin films with a silver hierarchical configuration. The coating of pure TiO₂ sol-gel and Ag-modified sol-gel was marked as T and A, respectively. According to the coating order and the nature of the TiO₂ sol-gel, four types of the TiO₂ thin films were constructed, and marked as AT (bottom layer was Ag modified, surface layer was pure TiO₂), TA (bottom layer was pure TiO₂, surface layer was Ag modified), TT (pure TiO₂ thin film) and AA (TiO₂ thin film was uniformly Ag modified). These thin films were characterized by means of linear sweep voltammetry (LSV), X-ray diffraction (XRD), scanning electron microscopy (SEM), electrochemical impedance spectroscopy and transient photocurrent (I_ph). LSV confirmed the existence of Ag⁰ state in the TiO₂ thin film. SEM and XRD experiments indicated that the sizes of the TiO₂ nanoparticles of the resulting films were in the order of TT > AT > TA > AA, suggesting the gradient Ag distribution in the films. The SEM and XRD results also confirmed that Ag had an inhibition effect on the size growth of anatase nanoparticles. Photocatalytic activities of the resulting thin films were also evaluated in the photocatalytic degradation process of methyl orange. The preliminary results demonstrated the sequence of the photocatalytic activity of the resulting films was AT > TA > AA > TT. This suggested that the silver hierarchical configuration can be used to improve the photocatalytic activity of TiO₂ thin film.     

Rational synthesis of α-MnO2 and γ-Mn2O3 nanowires with the electrochemical characterization of α-MnO2 nanowires for supercapacitor

An acidification-hydrothermal method was developed to synthesize α-MnO₂ nanowires, which was subsequently treated with ethanol, resulting in γ-Mn₂O₃ nanowire bundles on a large scale. The electrochemical characterization was carried out by cyclic voltammetry, which indicated that the α-MnO₂ nanowires in 0.5 mol L⁻¹ Na₂SO₄ aqueous electrolyte was of an excellent electrode material for supercapacitor at the scan rate of 10 mV S⁻¹ in the range of 0.0-0.85 V.     

Luminescence and diffuse reflectance studies of biacetyl included within p-tert-butylcalixarenes

Powdered solid samples of biacetyl within p-tert-butylcalix[4]arene and p-tert-butylcalix[6]arene were studied with the use of diffuse reflectance techniques to observe the formation of inclusion complexes of the diketone (probe) and those solid powdered matrixes.In all substrates, room temperature phosphorescence was obtained in air equilibrated samples. The decay times vary greatly and the largest lifetime was obtained for biacetyl/p-tert-butylcalix[4]arene, showing that this host cavity well accommodates biacetyl, this way promoting a significant increase of the triplet emission lifetimes of the diketone.Transient absorption spectra of inclusion complexes show the triplet-triplet absorption of biacetyl in the calix[4]arene case, while the ketyl radical formation is observed in the calix[6]arene case.A lifetime distribution analysis has shown a single band, peaking at 1.9 ms for biacetyl/calix[4]arene indicating a unique emissive species and in accordance with an endo inclusion of the probe within the non-polar cavity of the calixarene. Furthermore, in the calix[6]arene inclusion, the lifetime distribution exhibits two maxima peaking at 40 and 174 μs, showing that in this case the probe is emitting in two different environments, a more confined one within the non-polar cavity of the calixarene, while some others probe molecules emit from a location within the polar lower rim, in accordance with an exo-calix complex formation.     

Stabilization of a very high-k crystalline ZrO2 phase by post deposition annealing of atomic layer deposited ZrO2/La2O3 dielectrics on germanium

The impact of the ZrO₂/La₂O₃ film thickness ratio and the post deposition annealing in the temperature range between 400 °C and 600 °C on the electrical properties of ultrathin ZrO₂/La₂O₃ high-k dielectrics grown by atomic layer deposition on (1 0 0) germanium is investigated. As-deposited stacks have a relative dielectric constant of 24 which is increased to a value of 35 after annealing at 500 °C due to the stabilization of tetragonal/cubic ZrO₂ phases. This effect depends on the absolute thickness of ZrO₂ within the dielectric stack and is limited due to possible interfacial reactions at the oxide/Ge interface. We show that adequate processing leads to very high-k dielectrics with EOT values below 1 nm, leakage current densities in the range of 0.01 A/cm², and interface trap densities in the range of 2-5 × 10¹² eV⁻¹ cm⁻².     

Studies of the electrochemical reduction processes of Bi, HTeO2 and their mixtures

The reduction process of Bi³⁺, HTeO₂⁺ and their mixtures on Au electrode surface was studied by cyclic voltammetry, linear sweep voltammetry, electrochemical impedance spectroscopy and chronoamperometry. XRD and EDS methods were also used to measure the reductive products prepared under different potentials and provide the evidences of the reactions. The results indicate that the reduction of HTeO₂⁺ occurs at more positive potential than that of Bi³⁺, but its reduction rate is slower and adsorption phenomenon exists during its reduction process. Bi₂Te₃ compound can be obtained potentiostatically at a proper potential in all the mixed solutions with concentration ratio CHTe+O₂/CBi3+ in our research range (0.1-10). But pure Bi₂Te₃ compound can only be obtained at 42 mV in the solution with concentration ratio CHTe+O₂/CBi3+ equaling to 1. And the formation of Bi₂Te₃ compound is an inductive co-depositing process: (1) HTeO₂⁺ + 4e⁻ + 3H⁺ → Te⁰ + 2H₂O, (2) 3Te⁰ + 2Bi³⁺ + 6e⁻ → Bi₂Te₃.     

Co-electrolysis of CO2 and H2O in solid oxide cells: Performance and durability

This study examines the initial performance and durability of a solid oxide cell applied for co-electrolysis of CO₂ and H₂O. Such a cell, when powered by renewable/nuclear energy, could be used to recycle CO₂ into sustainable hydrocarbon fuels. Polarization curves and electrochemical impedance spectroscopy were employed to characterize the initial performance and to break down the cell resistance into the resistance for the specific processes occurring during operation. Transformation of the impedance data to the distribution of relaxation times (DRT) and comparison of measurements taken under systematically varied test conditions enabled clear visual identification of five electrode processes that contribute to the cell resistance. The processes could be assigned to each electrode and to gas concentration effects by examining their dependence on gas composition changes and temperature.This study also introduces the use of the DRT to study cell degradation without relying on a model. The durability was tested at consecutively higher current densities (and corresponding overpotentials). By analyzing the impedance spectra before and after each segment, it was found that at low current density operation (− 0.25 A/cm² segment) degradation at the Ni/YSZ electrode was dominant, whereas at higher current densities (− 0.5 A/cm² and − 1.0 A/cm²), the Ni/YSZ electrode continued to degrade but the serial resistance and degradation at the LSM/YSZ electrode began to also play a major role in the total loss in cell performance. This suggests different degradation mechanisms for high and low current density operation.     

High-resolution FTIR measurement of the ν4 band of methylene fluoride-d2

A high-resolution (0.002 cm⁻¹) infrared absorption spectrum of methylene fluoride-d₂ (CD₂F₂) of the lowest fundamental mode ν₄ in the region from 460 to 610 cm⁻¹ has been measured on a Bruker IFS 120-HR Fourier transform infrared spectrometer. More than 3500 transitions have been assigned in this B-type band centered at 521.9 cm⁻¹. The data have been combined with upper state pure rotational measurements in a weighted least-squares fit to obtain molecular constants for the upper state resulting in an overall standard deviation of 0.00018 cm⁻¹. Accurate value for the band origin (521.9578036 cm⁻¹) has been obtained and inclusion of transitions with very high J (?60) and K_a (?34) values has resulted in improved precision for sextic centrifugal distortion constants, in particular D_K, H_KJ, and H_K.     

Spectrofluorimetric study on the inclusion behavior of p-sulfonated calix arene with cetyltrimethylammonium bromide and analytical application

The characteristics of host-guest complexation between p-sulfonated calix [G. Arena, S. Gentile, F. G. Gulino, D. Sciotto, C. Sgarlata, Tetrahedron Lett. 45 (2004) 7091] arene (SC6A) and cationic surfactant cetyltrimethylammonium bromide (CTAB) were studied by fluorescence spectrometry. A 1:1 stoichiometry for the complexation was established and the complex constant was also calculated by a deduced equation. It was found the fluorescence of the complex could be remarkably quenched by an appropriate amount of ceftriaxone sodium (CTRX). Based on the results, a novel spectrofluorimetric method for determination of CTRX was developed with a linear range of 9.2×10⁻⁷-8.5×10⁻⁵ mol L⁻¹ and a detection of 3.5×10⁻⁷ mol L⁻¹. The proposed method was used to determine CTRX in their commercial preparations with satisfactory results. Moreover, the probable interaction mechanisms of the systems were also discussed.     

Optical properties of Er in MoO3-Bi2O3-TeO2 glasses

Erbium-doped MoO₃−Bi₂O₃−TeO₂ (MBT) glasses suitable for broadband optical amplifier applications have been fabricated and characterized optically. The maximum phonon band of undoped glasses is at 915 cm⁻¹, and the emission from the Er³⁺: ⁴I_13/2 → ⁴I_15/2 transition locates around 1.53 μm with a full width at half maximum (FWHM) of ∼80 nm. The lifetime and quantum efficiency of the ⁴I_13/2 level are 2.13 ms and ∼90%, respectively. Under the same measurement condition, the upconversion emission intensities at 550 nm in Er³⁺-doped MBT glasses is about 30 times weaker than that in Er³⁺-doped Na₂O−ZnO−TeO₂ (NZT) glasses.