Kinetics and Mechanism of Oxidation of S2O32− by a Co‐Bound μ‐Amido‐μ‐Superoxo Complex

In acetate buffer media (pH 4.5–5.4) thiosulfate ion (S₂O₃^2?) reduces the bridged superoxo complex, [(NH₃)₄Co^III(μ‐NH₂,μ‐O₂)Co^III(NH₃)₄]⁴⁺ ( 1 ) to its corresponding μ‐peroxo product, [(NH₃)₄Co^III(μ‐NH₂,μ‐O₂)Co^III(NH₃)₄]³⁺ ( 2 ) and along a parallel reaction path, simultaneously S₂O₃^2? reacts with 1 to produce the substituted μ‐thiosulfato‐μ‐superoxo complex, [(NH₃)₄Co^III(μ‐S₂O₃,μ‐O₂)Co^III(NH₃)₄]³⁺ ( 3 ). The formation of μ‐thiosulfato‐μ‐superoxo complex ( 3 ) appears as a precipitate which on being subjected to FTIR shows absorption peaks that support the presence of Co(III)‐bound S‐coordinated S₂O₃^2? group. In reaction media, 3 readily dissolves to further react with S₂O₃^2? to produce μ‐thiosulfato‐μ‐peroxo product, [(NH₃)₄Co^III(μ‐S₂O₃,μ‐O₂)Co^III(NH₃)₄]²⁺ ( 4 ). The observed rate (k₀) increases with an increase in [T_Thio] ([T_Thio] is the analytical concentration of S₂O₃^2?) and temperature (T), but it decreases with an increase in [H⁺] and the ionic strength (I). Analysis of the log A_t versus time data (A is the absorbance of 1 at time t) reveals that overall the reaction follows a biphasic consecutive reaction path with rate constants k₁ and k₂ and the change of absorbance is equal to {a₁ exp(–k₁t) + a₂ exp(–k₂t)}, where k₁ > k₂.     

(18‐Crown‐6)‐μ‐oxo‐hexa­kis(tetra­hydro­borato)diuranium(IV): an unprecedented asymmetric dinuclear complex

In the title compound, (1,4,7,10,13,16‐hexa­oxacyclo­octa­decane‐1κ⁶O)‐μ‐oxo‐1:2κ²O:O‐hexa­kis(tetra­hydro­borato)‐1κ³H;2κ²H;2κ²H;2κ³H;2κ³H;2κ³H‐diuranium(IV), [U₂(BH₄)₆O(C₁₂H₂₄O₆)], one of the U atoms (U1), located at the centre of the crown ether moiety, is bound to the six ether O atoms, and also to a tridentate tetra­hydro­borate group and a μ‐oxo atom in axial positions. The other U atom (U2) is bound to the same oxo group and to five tetra­hydro­borate moieties, three of them tridentate and the other two bidentate. The two metal centres are bridged by the μ‐oxo atom in an asymmetric fashion, thus giving the species (18‐crown‐6)(κ³‐BH₄)U=(μ‐O)—U(κ³‐BH₄)₃(κ²‐BH₄)₂, in which the U1=O and U2—O bond lengths to the μ‐O atom [1.979 (5) and 2.187 (5) Å, respectively] are indicative of the presence of positive and negative partial charges on U1 and U2, respectively.     

catena‐Poly[potassium [copper(II)‐μ‐isothiocyanato‐μ‐N‐salicylidene‐β‐alaninato(2–)]]

The title polymeric compound, catena‐poly­[dipotassium [bis­[μ‐N‐salicyl­idene‐β‐alaninato(2−)]‐κ⁴O,N,O′:O′′;κ⁴O′′:O,N,O′‐dicopper(II)]‐di‐μ‐iso­thio­cyanato‐κ²N:S;κ²S:N], {K[Cu(NCS)(C₁₀H₉NO₃)]}_n, consists of [iso­thio­cyanato(N‐salicyl­idene‐β‐alaninato)copper(II)]⁻ anions connected through the two three‐atom thio­cyanate (μ‐NCS) and the two anti,anti‐μ‐­carboxyl­ate bridges into infinite one‐dimensional polymeric anions, with coulombically interacting K⁺ counter‐ions with coordination number 7 constrained between the chains. The Cu^II atoms adopt a distorted tetragonal–bipyramidal coordination, with three donor atoms of the tridentate Schiff base and one N atom of the bridging μ‐NCS ligand in the basal plane. The first axial position is occupied by a thio­cyanate S atom of a symmetry‐related μ‐NCS ligand at an apical distance of 2.9770 (8) Å, and the second position is occupied by an O atom of a bridging carboxyl­ate group from an adjacent coordination unit at a distance of 2.639 (2) Å.     

Metal Derivatives of Heterocyclic Thioamides: Synthesis and Crystal Structures of Copper Complexes with 1‐Methyl‐1,3‐imidazoline‐2‐thione and 1,3‐Imidazoline‐2‐thione

Reactions of copper(I) halides (Cl, Br, I) with 1‐methyl‐1, 3‐imidazoline‐2‐thione (mimzSH) in 1 : 2 molar ratio yielded sulfur‐bridged dinuclear [Cu₂X₂(μ‐S‐mimzSH)₂(η¹‐S‐mimzSH)₂] (X = I, 1 , Br, 2 ; Cl, 3 ) complexes. Copper(I) iodide with 1,3‐imidazoline‐2‐thione (imzSH₂) and Ph₃P in 1 : 1 : 1 molar ratio has also formed a sulfur‐bridged dinuclear [Cu₂I₂(μ‐S‐imzSH₂)₂(PPh₃)₂] ( 4 ) complex. The central Cu(μ‐S)₂Cu cores form parallelograms with unequal Cu–S bond distances {2.324(2), 2.454(3) Å} ( 1 ); {2.3118(6), 2.5098(6) Å} ( 2 ); {2.3075(4), 2.5218(4) Å} ( 3 ); {2.3711(8), 2.4473(8) Å} ( 4 ). The Cu···Cu separations, 2.759–2.877Å in complexes 1 – 3 are much shorter than 3.3446Å in complex 4 . The weak intermolecular interactions {H₂CH···S^# ( 2 ); CH···Cl^# ( 3 ); NH···I^# ( 4 )} between dimeric units in complexes 2 – 4 lead to the formation of linear 1D polymers.     

μ‐3,4′‐Bi‐1,2,4‐triazole‐di‐μ‐chloro‐cuivre(II) monohydraté

In the title compound, μ‐3,4′‐bi‐1,2,4‐triazole‐di‐μ‐chloro‐copper(II) monohydrate, {[CuCl₂(C₄H₄N₆)]·H₂O}_n, the Cu atom is located in a distorted octahedron consisting of two N atoms and four Cl atoms. The structural unit is an infinite chain in which octahedral groups, connected by shared edges, are also linked by bitriazole mol­ecules. The bitriazole ligand, the Cu atom and the water O atom all lie on independent twofold axes. The structure is held together by hydrogen bonds between the water mol­ecules and the non‐coordinated N atoms of the ligand, and by van der Waals forces.     

两种新型μ－氧桥联－双铁(III)席夫碱配合物：X-衍射分析，IR, UV-Vis, CD光谱，磁性质和电化学性质

热力学稳定的带有大环配体的μ－氧桥联－双铁配合物，由于其两个铁中心之间的有趣的电子结构和磁相互作用而受到广泛关注。μ－氧桥联－双铁席夫碱配合物，[{Fe(tbusalphn)}₂(μ-o)] (1)和[{Fe(R,R-salchxn)}₂(μ-o)] (2), 通过用咪唑或N－甲基咪唑的水溶液处理相应的单核铁氯化物，Fe(L)Cl，而获得。1和2的晶体结构通过x-射线结构分析而被确定。1属于三斜晶系，P－1空间群。2属于单斜晶系，P2₁/c空间群。由于1的配体带有庞大的叔丁基取代基，导致形成μ－氧桥联－双铁配合物时的空间拥挤，因此，其Fe-O-Fe夹角为176.5 ^o，几乎成平角。而2则由于配体上没有庞大的取代基，其Fe-O-Fe夹角为149.6^o，明显小于1的Fe-O-Fe夹角。 本文还对两种μ－氧桥联－双铁席夫碱配合物及相应的单核铁氯化物的红外光谱、紫外－可见吸收光谱及圆二色光谱性质进行了研究。与相应的单体铁配合物相比较，生成μ－氧桥联－双铁席夫碱配合物后，出现一新的红外吸收带，归属于ν_Fe-O-Fe振动。有趣的是，其数值与Fe-O-Fe夹角大小相对应。1和2除具有明显不同的Fe-O-Fe夹角外，它们的圆二色光谱却是相似的。 对1和2的磁性质研究表明，在这类化合物中两个铁(III)离子之间存在着强烈的分子内抗铁磁性偶合作用。另外，本文还采用循环伏安法对1和2的电化学性质进行了研究。     

Di‐μ‐hydroxido‐bis{[bis(6‐methyl‐2‐pyridylmethyl)(2‐phenylethyl)amine‐κ3N′,N′′,N′′′]copper(II)} bis(perchlorate)

The title compund, [Cu₂(OH)₂(C₂₂H₂₅N₃)₂](ClO₄)₂, is a copper(II) dimer, with two [CuL]²⁺ units [L is bis(6‐methyl‐2‐pyridylmethyl)(2‐phenylethyl)amine] bridged by hydroxide groups to define the {[CuL](μ‐OH)₂[CuL]}²⁺ cation. Charge balance is provided by perchlorate counter‐anions. The cation has a crystallographic inversion centre halfway between the Cu^II ions, which are separated by 3.0161 (8) Å. The central core of the cation is an almost regular Cu₂O₂ parallelogram of sides 1.931 (2) and 1.935 (2) Å, with a Cu—O—Cu angle of 102.55 (11)°. The coordination geometry around each Cu^II centre can be best described as a square‐based pyramid, with three N atoms from L ligands and two hydroxide O atoms completing the coordination environment. Each cationic unit is hydrogen bonded to two perchlorate anions by means of hydroxide–perchlorate O—H...O interactions.     

Synthesis and Structure of the Tetrameric [Cp*V(μ‐F)2]4 (Cp* = C5Me5); Preparation of the Imido Molybdenum Fluoride [(2,6‐i‐Pr2C6H3N)2MoF2] · THF and the Structural Investigation of [(2,6‐i‐Pr2C6H3N)6Mo4(μ3‐F)2Me2(μ‐O)4]

Treating [Cp*V(μ‐Cl)₂]₃ (Cp* = C₅Me₅) and [(2,6‐i‐Pr₂C₆H₃N)₂MoMe₂], respectively, with Me₃SnF afforded the title compounds [Cp*V(μ‐F)₂]₄ ( 1 ) and [(2,6‐i‐Pr₂C₆H₃N)₂MoF₂] · THF ( 2 ). 1 has a tetrameric structure, in which four V atoms can be regarded as being arranged at the vertices of a distorted tetrahedron, with four long edges bridged by one F atom and each of the other two short edges bridged by two F atoms with a mean V–F bond length of 2.00 Å. A hydrolyzed product of 2 , [(2,6‐i‐Pr₂C₆H₃N)₆Mo₄(μ₃‐F)₂Me₂(μ‐O)₄] ( 3 ) was characterized by elemental analyses and X‐ray single crystal study. The X‐ray diffraction analysis reveals that 3 has a unique tetranuclear structure, containing two five and two six coordinated Mo atoms connecting each other by four μ‐O and two μ₃‐F atoms. The geometries around the two Mo atoms can be described having distorted trigonal bipyramidal and distorted octahedral coordination spheres, respectively. The Mo–(μ‐O) bond lengths are 1.813 Å (average) for five coordinated Mo atoms and 2.030 Å (average) for those of six coordinated, respectively, indicating an additional π bonding between five coordinated Mo atoms and the μ‐O atoms. The Mo–(μ₃‐F) distances range from 2.291 to 2.352 Å.     

Poly[μ‐2‐aminopyrazine‐κ2N1:N4‐μ‐cyanido‐copper(I)]: a three‐dimensional network from laboratory powder diffraction data

In the title compound, [Cu(CN)(C₄H₅N₃)]_n or [Cu(μ‐CN)(μ‐PyzNH₂)]_n (PyzNH₂ is 2‐aminopyrazine), the Cu^I center is tetrahedrally coordinated by two cyanide and two PyzNH₂ ligands. The Cu^I–cyano links give rise to [Cu–CN]_∞ chains running along the c axis, which are bridged by bidentate PyzNH₂ ligands. The three‐dimensional framework can be described as being formed by two interpenetrated three‐dimensional honeycomb‐like networks, both made of 26‐membered rings of composition [Cu₆(μ‐CN)₂(μ‐PyzNH₂)₄].     

Poly[di‐μ‐aqua‐μ‐1,2‐bis(pyridin‐4‐yl)ethene‐κ2N:N′‐tetrakis(4‐iodobenzoato‐κ2O,O′)dicadmium]

Colourless crystals of the title compound, [Cd₂(C₇H₄IO₂)₄(C₁₂H₁₀N₂)(H₂O)₂]_n, were obtained by the self‐assembly of Cd(NO₃)₂·4H₂O, 1,2‐bis(pyridin‐4‐yl)ethene (bpe) and 4‐iodobenzoic acid (4‐IBA). Each Cd^II atom is seven‐coordinated in a pentagonal–bipyramidal coordination environment by four carboxylate O atoms from two different 4‐IBA ligands, two O atoms from two water molecules and one N atom from a bpe ligand. The Cd^II centres are bridged by the aqua molecules and bpe ligands, which lie across centres of inversion, to give a two‐dimensional net. Topologically, taking the Cd^II atoms as nodes and the μ‐aqua and μ‐bpe ligands as linkers, the two‐dimensional structure can be simplified as a (6,3) network.     

(PPh4)2[Cl2Re(N3S2)(μ‐NSN)(μ‐N≡ReCl3)]2 – ein Rhenium(VII)‐Komplex mit einer Nitrido‐, einer Dinitridosulfato(II)‐ und einer Rhena‐3,5‐dithia‐2,4,6‐triazino‐Funktion

(PPh₄)₂[Cl₂Re(N₃S₂)(μ‐NSN)(μ‐N≡ReCl₃)]₂ – a Rhenium(VII) Complex with a Nitrido, a Dinitridosulfato(II), and a Rhena‐3,5‐dithia‐2,4,6‐triazino Function The title compound has been prepared from PPh₄[Re^VIICl₄(NSCl)₂] with N(SiMe₃)₃ in dichloromethane solution to give red‐brown single crystals, which were suitable for a crystal structure determination. As a by‐product PPh₄[ReNCl₄] is formed. (PPh₄)₂[Cl₂Re^VII(N₃S₂)(μ‐NSN)(μ‐N≡Re^VIICl₃)]₂ ( 1 ): Space group P2₁/c, Z = 2, lattice dimensions at –80 °C: a = 1280.8(2), b = 1017.5(1), c = 2467.8(3) pm, β = 95.04(1)°, R = 0.049. The complex anion of 1 consists of a planar ReN₃S₂‐heterocycle which is connected with the second rhenium atom by a μ‐nitrido bridge as well as by a μ‐dinitridosulfato(II) ligand to form a planar Re₂(N)(NSN) six‐membered heterocycle. This [Cl₂Re(N₃S₂)(μ‐NSN)(μ‐N≡ReCl₃)]^– unit dimerizes via one of the N‐atoms of the (NSN)^4– ligand to give a centrosymmetric Re₂N₂ four‐membered ring.     

Manganese(II) Complexes with Bridging Selenidoarsenate(III) Anions [AsSe2(Se2)]3− and [(AsSe2)2(μ‐Se2)]4−

Solvothermal reaction of [MnCl₂(terpy)] with elemental As and Se at a 1:1:2 molar ratio in H₂O/trien (10:1) at 150 °C affords the linear trimanganese(II) complex [{Mn(terpy)}₃(μ‐AsSe₄)₂] ( 1 ). The tridentate [AsSe₂(Se₂)]^3? anions of 1 chelate the terminal {Mn(terpy)}²⁺ fragments and bridge these through their remaining Se atom to the central {Mn(terpy)}²⁺ moiety. Weak interactions of Mn1···Se and Mn3···Se bonds with length 2.914(7) and 3.000(7) Å link the molecules of 1 into infinite chains. Treatment of [MnCl₂(cyclam)]Cl with As and Se at a 1:1:2 molar ratio in superheated H₂O/CH₃OH (1:1) at 150 °C yields the dinuclear complex [{Mn(cyclam)}₂ (μ‐As₂Se₆)] ( 2 ), whose novel [(AsSe₂)₂(μ‐Se₂)]^4? ligands bridge the Mn^II atoms in a μ‐1κ²Se¹, Se²: 2κ²Se⁵,Se⁶ manner.     

{[Mn2(μ3‐Tda)2(μ‐H2O)(H2O)2(bipy)]·DMF}n – a 2D Manganese(II) Coordination Polymer involving Six‐membered Binuclear Metallacycle Nodes

The single crystal X‐ray analysis of a novel thiophene‐2,5‐dicarboxylic acid (H₂Tda) Manganese(II) coordination polymer, {Mn₂(μ₃‐Tda)₂(μ‐H₂O)(H₂O)₂(bipy)]·DMF}_n, shows two different types of Mn²⁺‐ions with environment of Mn1O₆ and Mn2O₄N₂, and the complex is a two‐dimensional polymer as a result of bridging (Tda)^2? ligands and by connecting the carboxylate‐ and water‐bridged {Mn₂(μ‐Tda)₂(μ‐H₂O)} nodes.     

(Ph4P)2[Be3(μ‐OH)3(H2O)6]Cl5: Kristallstruktur und DFT‐Rechnungen

Bis(tetraphenylphosphonium)‐tris(μ‐hydroxo)hexaaquatriberylliumpentachloride, (Ph₄P)₂[Be₃(μ‐OH)₃(H₂O)₆]Cl₅ ( 1 ), was surprisingly obtained by reaction of (Ph₄P)N₃ · n H₂O with BeCl₂ in dichloromethane suspension and subsequent crystallization from acetonitrile to give single crystals of composition 1· 5.25CH₃CN. According to the crystal structure determination space group P , Z = 2, lattice dimensions at 100 K: a = 1354.8(2), b = 1708.7(2), c = 1753.2(2) pm, α = 114.28(1)°, β = 94.80(1)°, γ = 104.51(1)°, R₁ = 0.0586] the [Be₃(μ‐OH)₃(H₂O)₆]³⁺ cations form six‐mem‐bered Be₃O₃ rings with boat conformation and distorted tetrahedrally coordinated beryllium atoms with the terminally coordinated H₂O molecules. The structure ist characterized by a complicated three dimensional hydrogen‐bridging network including O–H ··· O, O–H ··· Cl, and O–H ··· NCCH₃ contacts. DFT calculations result in nearly planar [Be₃(OH)₃] six‐membered ring conformations.     

The infinite one‐dimensional chain polymer catena‐poly­[[bis­[μ‐1,1′‐ethane‐1,2‐diyl­bis(1,2,4‐triazole)‐κ2N4:N4′]­bis­[azido­zinc(II)]]‐di‐μ‐azido‐κ4N1:N1]

In the crystal structure of the title complex, [Zn(N₃)₂(C₆H₈N₆)]_n or [Zn(N₃)₂(bte)]_n, where bte is μ‐1,2‐bis(1,2,4‐triazol‐1‐yl)­ethane, each Zn atom is pentacoordinated in a distorted trigonal‐bipyramidal coordination environment involving two N atoms from two bte ligands and three N atoms from three azide ligands. The Zn atoms are bridged by μ‐1,1‐azide groups and bte ligands around a centre of inversion, forming an infinite one‐dimensional chain containing both four‐membered Zn(μ‐1,1‐N₃)₂Zn and 18‐membered Zn(gauche‐bte)₂Zn rings.     

Bis{μ‐6,6′‐dimethoxy‐2,2′‐[propane‐1,2‐diylbis(iminomethylene)]diphenolato}bis[aquacopper(II)] dihydrate

In the title compound, [Cu₂(C₁₉H₂₄N₂O₄)₂(H₂O)₂]·2H₂O, the asymmetric unit consists of one half of the bis{μ‐6,6′‐dimethoxy‐2,2′‐[propane‐1,2‐diylbis(iminomethylene)]diphenolato}bis[aquacopper(II)] complex and two water molecules. Two Cu^II centres are bridged through a pair of phenolate groups, resulting in a complex with a centrosymmetric structure, with the centre of inversion at the middle of the Cu₂O₂ plane. The Cu atoms are in a slightly distorted square‐pyramidal coordination environment (τ = 0.07). The average equatorial Cu—O bond length and the axial Cu—O bond length are 1.928 (3) and 2.486 (3) Å, respectively. The Cu—O(water) bond length is 2.865 (4) Å, so the compound could be described as having a weakly coordinating water molecule at each Cu^II ion and two solvent water molecules per dimetallic unit. The Cu...Cu distance and Cu—O—Cu angle are 3.0901 (10) Å and 87.56 (10)°, respectively. The molecules are linked into a sheet by O—H...O and C—H...O hydrogen bonds parallel to the [001] plane.     

Aktivierung von Schwefelkohlenstoff an Trirutheniumclustern: Synthese und Kristallstruktur von [Ru3(CO)5(μ‐H)2(μ‐PCy2)(μ‐Ph2PCH2PPh2){μ‐η2‐PCy2C(S)}(μ3‐S)] und [Ru3(CO)5(CS)(μ‐H)(μ‐PtBu2)(μ‐PCy2)2(μ3‐S)]

Activation of Carbon Disulfide on Triruthenium Clusters: Synthesis and X‐Ray Crystal Structure Analysis of [Ru₃(CO)₅(μ‐H)₂(μ‐PCy₂)(μ‐Ph₂PCH₂PPh₂){μ‐η²‐PCy₂C(S)}(μ₃‐S)] and [Ru₃(CO)₅(CS)(μ‐H)(μ‐P^tBu₂)(μ‐PCy₂)₂(μ₃‐S)] [Ru₃(CO)₆(μ‐H)₂(μ‐PCy₂)₂(μ‐dppm)] ( 1 ) (dppm = Ph₂PCH₂PPh₂) reacts under mild conditions with CS₂ and yields by oxidative decarbonylation and insertion of CS into one phosphido bridge the opened 50 VE‐cluster [Ru₃(CO)₅(μ‐H)₂(μ‐PCy₂)(μ‐dppm){μ‐η²‐PCy₂C(S)}(μ₃‐S)] ( 2 ) with only two M–M bonds. The compound 2 crystallizes in the triclinic space group P 1 with a = 19.093(3), b = 12.2883(12), c = 20.098(3) Å; α = 84.65(3), β = 77.21(3), γ = 81.87(3)° and V = 2790.7(11) ų. The reaction of [Ru₃(CO)₇(μ‐H)(μ‐P^tBu₂)(μ‐PCy₂)₂] ( 3 ) with CS₂ in refluxing toluene affords the 50 VE‐cluster [Ru₃(CO)₅(CS)(μ‐H)(μ‐P^tBu₂)(μ‐PCy₂)₂(μ₃‐S)] ( 4 ). The compound cristallizes in the monoclinic space group P 2₁/a with a = 19.093(3), b = 12.2883(12), c = 20.098(3) Å; β = 104.223(16)° and V = 4570.9(10) ų. Although in the solid state structure one elongated Ru–Ru bond has been found the complex 4 can be considered by means of the ³¹P‐NMR data as an electron‐rich metal cluster.     

The first di‐μ‐hydro­xo‐bridged binuclear copper complex containing a bis‐guanidine ligand

The present structure determination of di‐μ‐hydroxo‐bis{[N,N′‐bis­(dipiperidino­methyl­ene)­propane‐1,3‐di­amine‐κ²N,N′]copper(II)} bis­(hexa­fluoro­phosphate), [Cu₂(OH)₂(C₂₅H₄₆N₆)₂](PF₆)₂, is the first to crystallographically characterize a Cu₂(μ‐OH)₂ complex with a bidentate guanidine ligand. The cation lies on a crystallographic inversion centre and shows planar fourfold coordination of the copper centres. The Cu₂(μ‐OH)₂ species can be distinguished from Cu₂(μ‐O)₂ by the Cu—O bond lengths. The packing is determined by strong intermolecular anion–cation hydrogen bonds.     

AgI and CuI binuclear macrocyclic complexes with 1‐(3‐pyridyl)­ethano­ne oxime

Bis­[μ‐1‐(3‐pyridyl)­ethanone oxime‐κ²N:N′]­bis­[nitrato­sil­ver(I)], [Ag₂(NO₃)₂(C₇H₈N₂O)₂], crystallizes as a centrosymmetric binuclear macrocylic complex containing silver(I) ions bridged by the organic 1‐(3‐pyridyl)­ethanone oxime ligand. The ligand coordinates via the pyridine and the oxime N atoms. A similar metal–ligand arrangement was found in the copper(I) complex catena‐poly­[[bis­[μ‐1‐(3‐pyridyl)­ethano­ne oxime‐κ²N:N′]­dicopper(I)]‐di‐μ‐iodo], [Cu₂I₂(C₇H₈N₂O)₂]_n, but here the centrosymmetric macrocycles are connected by double anion bridges, resulting in the formation of a one‐dimensional coordination polymer.     

Synthesis,X‐ray characterization and density functional theory studies of N6‐benzyl‐N6‐methyladenine–M(II) complexes (M = Zn,Cd): The prominent role of π–π, C–H···π and anion–π interactions

We report the synthesis and X‐ray characterization of the N⁶‐benzyl‐N⁶‐methyladenine ligand (L) and three metal complexes, namely [Zn(HL)Cl₃]·H₂O ( 1 ), [Cd(HL)₂Cl₄] ( 2 ) and [H₂L]₂[Cd₃(μ‐L)₂(μ‐Cl)₄Cl₆]·3H₂O ( 3 ). Complex 1 consists of the 7H‐adenine tautomer protonated at N3 and coordinated to a tetrahedral Zn(II) metal centre through N9. The octahedral Cd(II) in complex 2 is N⁹‐coordinated to two N⁶‐benzyl‐N⁶‐methyladeninium ligands (7H‐tautomer protonated at N3) that occupy apical positions and four chlorido ligands form the basal plane. Compound 3 corresponds to a trinuclear Cd(II) complex, where the central Cd atom is six‐coordinated to two bridging μ‐L and four bridging μ‐Cl ligands. The other two Cd atoms are six‐coordinated to three terminal chlorido ligands, to two bridging μ‐Cl ligands and to the bridging μ‐L through N3. Essentially, the coordination patterns, degree of protonation and tautomeric forms of the nucleobase dominate the solid‐state architectures of 1 – 3 . Additionally, the hydrogen‐bonding interactions produced by the endocyclic N atoms and NH groups stabilize high‐dimensional‐order supramolecular assemblies. Moreover, energetically strong anion–π and lone pair (lp)–π interactions are important in constructing the final solid‐state architectures in 1 – 3 . We have studied the non‐covalent interactions energetically using density functional theory calculations and rationalized the interactions using molecular electrostatic potential surfaces and Bader's theory of atoms in molecules. We have particularly analysed cooperative lp–π and anion–π interactions in 1 and π⁺–π⁺ interactions in 3 .