一种吡啶-水杨醛类席夫碱的合成及对Zn2+的特异性识别

通过席夫碱反应将2-氨基4-甲基吡啶与4-(二乙氨基)水杨醛结合,设计并合成出一种新型的荧光探针L,该探针能特异性识别Zn²⁺。通过质谱、¹H NMR以及¹³C NMR表征其结构,并利用荧光光谱、紫外-可见吸收光谱研究了探针L在CH₃OH-H₂O(V:V=8:2,Tris-HCl缓冲液,pH=7.4)中对各种离子的选择识别能力。实验结果显示,向探针L中加入Zn2+之后,溶液从无荧光变成蓝色荧光,且457 nm处出现一发射峰。Job’s plot工作曲线结果和密度泛函理论(DFT)计算表明探针L与Zn2+结合计量比为1:1。荧光滴定结果表明探针L对Zn2+的检测极限可低至2.7×10^-8 mol·L^-1,结合常数为1.32×10⁴ L·mol^-1,pH应用范围4.0～10.0。对真实水样中的Zn2+进行检测,平均回收率大于98%,RSD小于1.61%,表明探针L能够检测真实水样中的Zn2+。     

咔唑-N，S-杂冠醚类荧光探针的合成及其检测Ag+性质

以双(2?氯乙基)氨基甲酸叔丁酯、2,2?(乙烷?1,2?二丁基(氧基))二乙硫醇和N?乙基咔唑为起始原料,设计、合成了一种含有杂冠醚基团的新型荧光探针分子L,其结构经¹H NMR、¹³C NMR及高分辨质谱进行了表征。随后利用荧光光谱在水/乙醇溶剂(4∶1,V/V)中研究了探针L对Ag⁺的选择性识别。研究结果表明,探针L与Ag⁺以1∶1的比例配位。通过计算得到配位常数K_a为2.01×10⁵ L·mol^-1,检测限为4.13μmol·L^-1。通过实验证明,该探针分子可应用于河流等环境水样中Ag⁺的检测。     

一例喹喔啉酰腙荧光探针对锌离子的选择性高灵敏识别及细胞成像应用

通过缩合反应制备了一例席夫碱荧光探针2-喹喔啉甲醛缩2-吡啶酰肼(1),使用核磁共振氢谱和碳谱及质谱等手段表征了探针的结构。荧光光谱分析表明,探针1自身无荧光,而Zn²⁺能够导致其在500 nm处出现强发射峰。该荧光增强能够在常见阳离子中选择性检测Zn²⁺,检测限低至0.16μmol·L^-1。通过核磁、质谱和紫外等手段推测了探针1与Zn²⁺可能的配位模式。通过单晶X射线衍射解析了1-Zn²⁺配合物的晶体结构,进一步确认了探针的配位行为。1-Zn²⁺晶体中探针分别采取ONN和NN配位模式螯合2个Zn²⁺,并由桥联CH₃O^-和Cl^-连接形成一维链状结构。此外,该探针还可用于活细胞中Zn²⁺的检测。     

一种具有聚集诱导发光性能的Zn2+荧光探针的设计合成

以四苯乙烯为荧光基团,5-叔丁基-2-羟基苯作为识别基团,构建了一种新型的聚集诱导发光(AIE)效应Zn²⁺荧光探针L.探针结构通过NMR和ESI-MS表征,其荧光性能通过UV-vis和荧光光谱研究.在乙醇/磷酸盐(PBS)(V∶V=7∶3,pH=7.4)溶液中,探针对Zn²⁺表现出高灵敏度和选择性,其检测限低至34.1 nmol·L-1,在0～3.0×10-5mol·L-1范围内,探针对Zn²⁺表现出良好的线性关系.在自然光和紫外灯下用肉眼观察到明显颜色变化,可以实现Zn²⁺可视化检测.通过Job’splot,ESI-MS和密度泛函理论(DFT)理论计算对识别机理进行了研究.报道的新型探针可作为分析测定Zn²⁺的一种便捷工具.     

检测汞离子的比色-荧光双通道探针的设计合成及应用

以7-羟基吩恶嗪酮(试卤灵)为荧光团、硫代甲酸苯酯为汞离子(Hg²⁺)识别基团,经一步简单有机合成反应,制备了比色-荧光双通道探针NMP。采用核磁共振氢谱(¹H NMR)、核磁共振碳谱(¹³C NMR)和高分辨率质谱(HRMS)表征了探针结构,利用吸收光谱和荧光发射光谱测试了探针对Hg²⁺的选择性和灵敏度。光谱测试结果表明,探针对Hg²⁺具有较好的选择性和检测灵敏度,检出限(3σ)为17 nmol/L。反应溶液由淡黄色变为紫红色,可对溶液中Hg²⁺进行比色检测,并可用于实际水样中Hg²⁺的检测。采用CCK-8法测试了探针的细胞毒性,结果表明,在探针浓度低于10μmol/L时,细胞存活率高于90%。共聚焦荧光显微成像结果表明,探针具有较好的细胞通透性,可对细胞内Hg²⁺进行荧光成像。     

基于1,8-萘酰亚胺的Ag+荧光探针的合成及应用

通过N-丁基-4,5-二氨基-1,8-萘酰亚胺与2-噻吩甲醛缩合,构建了一种基于分子内电荷转移(ICT)的荧光探针NAPH-1(6-氨基-2-丁基-7-((噻吩-2-基亚甲基)氨基)-1H-苯并[de]异喹啉-1,3(2H-二酮)),其结构经¹H NMR、¹³C NMR、HRMS和元素分析确证。探究了该探针对Ag⁺选择性、荧光滴定、淬灭常数、检测限等性能。研究结果表明,NAPH-1对Ag⁺呈现出荧光淬灭效应,猝灭常数为2.96×10⁵L·mol^-1。值得关注的是,NAPH-1表现出对Ag⁺较好的选择性和响应性,检测限为0.32μmol·L^-1。水样中测定结果表明,NAPH-1可以作为一种潜在的Ag⁺检测工具。     

含蒽双三联吡啶化合物的合成及其对金属离子的荧光识别性能

以蒽,醋酸,溴化氢,1,3,5-三聚甲醛,N,N,N-三甲基-1-十四烷基溴化铵,双(2-吡啶基甲基)胺,三乙胺等为原料,合成了含蒽的双三联吡啶化合物,其结构经¹H NMR、 ¹³C NMR和HR-MS表征。目标产物中含有双三联吡啶结构,可以与金属离子之间具有较强的螯合作用,从而改变原来目标化合物的光学性质,尤其是其荧光性能。实验结果表明：体系中随着Zn²⁺、Ag⁺和Mn²⁺浓度不断增大,含蒽双三联化合物荧光强度不断增强;Cu²⁺、Co²⁺、Hg²⁺、Pb²⁺、Na⁺、Fe³⁺、Ni²⁺均随着浓度的增大,含蒽双三联化合物荧光强度不断减弱。在此基础上,运用荧光光谱法能高灵敏度的检测痕量金属离子。      

新型荧光探针罗丹明肉桂酰胺的合成及其用于荧光分光光度法测定汞

以罗丹明B和肉桂酸为主要反应物,制备了新型荧光探针罗丹明肉桂酰胺,并采用红外光谱、核磁和质谱对荧光探针的结构进行了表征。在含30%（φ）乙醇的pH 7.0 HEPES缓冲溶液中,荧光探针与Hg²⁺形成1比1的络合物,通过测定在发射波长584 nm处的荧光强度,与汞的浓度在1.0×10^-6mol·L^-1以内呈线性关系,方法的检出限（3s）为7.4×10^-9mol·L^-1。试验结果表明:该荧光探针对Hg²⁺具有很好的选择性,不受其他金属离子的干扰。     

新型吲嗪三联吡啶的合成及其荧光性能

以醋酸钯为催化剂,三环己基膦为配体,碳酸铯为碱,甲苯为溶剂,4-溴-三联吡啶和2-甲酸甲酯-吲嗪经Heck偶联反应合成了一个新型的吲嗪三联吡啶(3),其结构经¹H NMR, ¹³C NMR和HR-MS表征。并研究了3的荧光性能。结果表明：溶剂极性增加,3的荧光强度降低,最大发射波长红移;Cu²⁺可完全淬灭3的荧光;3的Cu²⁺, Cd²⁺, Zn²⁺配合物对部分氨基酸有荧光响应。     

N-乙基咔唑-3-甲醛席夫碱荧光探针的合成及其检测Cu2+性质

以咔唑为原料,经过两步反应制备得到N-乙基咔唑-3-甲醛,其结构经X射线单晶衍射测定属于单斜晶系,空间群为P2₁/n。再以N-乙基咔唑-3-甲醛与1,3-二氨-2-丙醇为原料,设计、合成了一种新型双席夫碱荧光探针分子CMP。借助荧光光谱在体积比为6∶4的DMSO/H₂O缓冲溶液(Tris-HCl,p H=7.0)中研究了探针CMP对Cu²⁺的选择性识别。研究结果表明,探针CMP与Cu²⁺以1∶2的比例配位,结合常数为1.52×10⁵L·mol^-1,检出限为0.205μmol·L^-1。回收实验表明,探针分子CMP可应用于环境水样中Cu²⁺的检测。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.