Gas Phase Selective Catalytic Oxidation of Toluene to Benzaldehyde on V2O5-Ag2O／η-Al2O3 Catalyst

Gas phase selective catalytic oxidation of toluene to benzaldehyde was studied on V2O5-Ag2O/η-Al2O3 catalyst prepared by impregnation. The catalyst was characterized by XRD, XPS, TEM,and FT-IR. The catalytic results showed that toluene conversion and selectivity for benzaldehyde on catalyst sample No.4 (V/(V Ag)=0.68) was higher than other catalysts with different V/Ag ratios. This was attributed to the higher surface area, larger pore volume and pore diameter of the catalyst sample No.4 than the other catalysts. The XRD patterns recorded from the catalyst before and after the oxidation reaction revealed that the new phases were developed, and this suggested that silver had entered the vanadium lattice. XPS results showed that the vanadium on the surface of No.4 and No.5 sample was more than that in the bulk, thus forming a vanadium rich layer on the surface. It was noted that when the catalyst was doped by potassium promoter, the toluene conversion and selectivity for benzalde hydewere higher than those on the undoped catalyst. This was attributed to the disordered structure of V2O5 lattice of the K-doped catalyst and a better interfacial contact between the particles.     

MgO纳米晶负载镍催化剂用于甲烷蒸汽重整反应(英文)

Nanocrystalline MgO with a relatively high surface area and mesoporous structure was synthesized by a surfactant assisted precipitation method for use as the support of nickel catalysts for steam reforming of methane. The samples were characterized by X‐ray diffraction, N2 adsorption, temperature‐programmed reduction, temperature‐programmed oxidation, scanning electron microscopy, and transmission electron microscopy. The catalysts showed high catalytic activity and good stability in the steam reforming of methane. Increasing the nickel loading up to 10 wt% gave increased activity. Catalysts with higher nickel loadings showed more deposited carbon after reaction. The excellent anti‐coking performance of the catalysts was attributed to the formation of a nickel‐magnesia solid solution, basicity of the support surface, and nickel‐support interaction.     

Simultaneous removal of ethanol, acetaldehyde and nitrogen oxides over V-Pd/γ-Al_2O_3-TiO_2 catalyst

V-Pd/γ-Al2O3-TiO2 catalysts with different vanadium contents were prepared by a combined sol-gel and impregnation method. X-ray diffraction (XRD), N2 adsorption-desorption (BET), X-ray photoelectron spectroscopy (XPS) and catalytic removal of ethanol, acetaldehyde and nitrogen oxides at low temperature (<300 ?C) were used to assess the properties of the catalysts. The results showed that the sample with 1wt% vanadium exhibited an excellent catalytic performance for simultaneous removal of ethanol, acetaldehyde and nitrogen oxides. The conversions of ethanol, acetaldehyde and nitrogen oxides at 250 ?C were 100%, 74.4% and 98.7%, respectively. V-Pd/γ-Al2O3-TiO2 catalyst with 1 wt% vanadium showed the largest surface area and higher dispersion of vanadium oxide on the catalyst surface, and possessed a larger mole fraction of V4+ species and unique PdO species on the surface, which can be attributed to the strong synergistic effect among palladium, vanadium and the carriers. The higher activity of V-Pd/γ-Al2O3-TiO2 catalyst is related to the V4+ and Pd2+ species on the surface, which might be favorable for the formation of active sites.     

Complete oxidation of ethanol over vanadium based catalysts

V2O5/γ-Al2O3-TiO2 catalysts were prepared by the mixing sol-gel and co-impregnation method. The performance of the catalysts for complete oxidation of ethanol was performed in a conventional fixed-bed quartz reactor. And the effects of support, preparation methods and vanadium content have been investigated. The results showed that 5% V2O5 catalyst supported on γ-Al2O3-TiO2 possessed the best ethanol conversion under the considered temperature. This may be ascribed to the highly dispersible active component, mutual function between the active component and the carriers. The nature of the best performance for 5%V/γ-Al2O3-TiO2 catalyst may be related to the high V4+ amounts on the surface. And the surface V4+ species may play an important role in the formation of active site for the total ethanol oxidation.     

稻壳SiO_2/钒催化剂上苯乙酮液相氧化(英文)

Rice husk silica catalyst loaded with 10 wt% vanadium was synthesized from agricultural biomass via a sol-gel synthetic route at pH = 9. The catalyst was characterized by different physico-chemical methods. The FTIR spectra showed the formation of Si–O–V and V=O stretching bands. The presence of vanadium was confirmed by EDX elemental analysis. RH-10V possessed a high specific surface area of 276 m2/g and pore volume of 0.83 ml/g. The prepared catalyst possessed a narrow pore size distribution centered around 7.9 nm. The catalytic performance of RH-10V was tested in the oxidation of acetophenone at 70 ℃. RH-10V was found to be an active catalyst in the oxidation of acetophenone, producing 36.28% conversion efficiency. The products identified were benzoic acid, 2-hydroxyacetophenone, phenol, acetic acid, and 3-hydroxyacetophenone.     

稻壳SiO2/钒催化剂上苯乙酮液相氧化（英文）

Rice husk silica catalyst loaded with 10 wt% vanadium was synthesized from agricultural biomass via a sol-gel synthetic route at pH = 9. The catalyst was characterized by different physico-chemical methods. The FTIR spectra showed the formation of Si–O–V and V=O stretching bands. The presence of vanadium was confirmed by EDX elemental analysis. RH-10V possessed a high specific surface area of 276 m2/g and pore volume of 0.83 ml/g. The prepared catalyst possessed a narrow pore size distribution centered around 7.9 nm. The catalytic performance of RH-10V was tested in the oxidation of acetophenone at 70 ℃. RH-10V was found to be an active catalyst in the oxidation of acetophenone, producing 36.28% conversion efficiency. The products identified were benzoic acid, 2-hydroxyacetophenone, phenol, acetic acid, and 3-hydroxyacetophenone.     

铂沉积对Ga2O3-SiO2纳米粒子光催化性能的提高（英文）

Ga2O3‐SiO2 nanoparticles were prepared by a sol‐gel method and Pt was then immobilized on their surface via photo‐assisted deposition (PAD). The produced samples were characterized using X‐ray diffraction (XRD), ultraviolet and visible spectroscopy, photoluminescence emission spectroscopy, and surface area measurements. The catalytic performances of the Ga2O3‐SiO2 and Pt/ Ga2O3‐SiO2 samples were evaluated for the degradation of cyanide using visible light. XRD and EDX results showed that the Pt was well dispersed within the Ga2O3‐SiO2 phase and was detected on the surface of the catalyst, which confirmed the successful loading of Pt ions by the PAD method. BET results revealed that the surface area of Ga2O3‐SiO2 was higher than that of Pt/Ga2O3‐SiO2 . 0.3 wt% Pt/Ga2O3‐SiO2 exhibited the highest photocatalytic activity for degradation of cyanide under visible light. The catalyst could be reused with no loss in activity for the first 10 cycles.     

NO-NH_3-O_2 reaction catalyzed by V_2O_5/AC at low temperatures——Effects of SO_2, V_2O_5 loading and reaction temperature

The effects of SO2, V2O5 loading and reaction temperature on the activity of activated carbon supported vanadium oxide catalyst have been studied for the reduction of NO with NH3 at low temperatures (150-250℃). It is found that SO2 significantly promotes the catalyst activity. Both V2O5 loading and reaction temperature are vital to the promoting effect of SO2. The catalysts with V2O5 loadings of 1 -5 weight percent have a positive effect on the promotion of SO2, while the catalysts with V2O5 loadings of above 7 weight percent have not such an effect or show a negative effect. At lower temperatures (<180℃) SO2 poisons the catalyst but at higher temperatures promotes it. The reason of the SO2 promotion was also discussed; it may results from the formation of SO42- on the catalyst surface, which increases the surface acidity and hence the catalytic activity.     

Study of CO2 Hydrogenation to Methanol over Cu-V/γ-Al2O3 Catalyst

The effect of vanadium addition to CU/γ-Al2O3 catalyst used in the hydrogenation of CO2 to produce methanol was studied. It was found that the catalytic performance of the Cu-based catalyst improved after V addition. The influence of reaction temperature, space velocity and the molar ratio of H2 to CO2 on the performance of 12%Cu-6%V/γ-Al2O3 catalyst were also studied. The results indicated that the best conditions for reaction were as follows: 240℃, 3600 h-1 and a molar ratio of H2 to CO2 of 3:1. The results of XRD and TPR characterization demonstrated that the addition of V enhanced the dispersion of the supported CuO species, which resulted in the enhanced catalytic performance of CU-V/γ-Al2O3 binary catalyst.     

CH_4 reforming with CO_2 for syngas production over La_2O_3 promoted Ni catalysts supported on mesoporous nanostructured γ-Al_2O_3

Nanostructured γ-Al2O3 with high surface area and mesoporous structure was synthesized by sol-gel method and employed as catalyst support for nickel catalysts in methane reforming with carbon dioxide. The prepared samples were characterized by XRD, N2adsorption-desorption,TPR, TPO, TPH, NH3-TPD and SEM techniques. The BET analysis showed a high surface area of 204 m2 g-1and a narrow pore-size distribution centered at a diameter of 5.5 nm for catalyst support. The BET results revealed that addition of lanthanum oxide to aluminum oxide decreased the specific surface area. In addition, TPR results showed that addition of lanthanum oxide increased the reducibility of nickel catalyst. The catalytic evaluation results showed an increase in methane conversion with increasing lanthanum oxide to 3 mol% and further increase in lanthanum content decreased the catalytic activity. TPO analysis revealed that the coke deposition decreased with increasing lanthanum oxide to 3 mol%. SEM and TPH analyses confirmed the formation of whisker type carbon over the spent catalysts. Addition of steam and O2 to dry reforming feed increased the methane conversion and led to carbon free operation in combined processes.     

氨法选择性还原氮氧化物 V2O5/TiO2-PILC催化剂的抗硫性能

选择性催化还原(SCR)是目前去除氮氧化物最有效的方法之一. V2O5/TiO2催化剂被广泛应用于氨法选择性还原氮氧化物(NH3-SCR)反应,但该催化剂存在工作温度高(300–400oC)及 SO2氧化率高引起设备腐蚀和管路堵塞等问题,开发低温 SCR催化剂具有重要意义.过渡金属氧化物(如 Fe2O3, MnOx和 CuO等)催化剂用于低温SCR先后见诸文献报道,但这些催化剂在 SO2和 H2O存在下易失活.近年来柱撑黏土(PILC)引起科学家广泛关注, Yang等首次将 V2O5/TiO2-PILC催化剂应用于 NH3-SCR反应,发现其催化活性高于传统 V2O5/TiO2催化剂.柱撑黏土基催化剂在 NH3-SCR反应中也显示出良好抗硫性能,但 V2O5/TiO2-PILC催化剂的抗硫机理至今尚未见深入研究.因此我们制备了一系列 V2O5/TiO2-PILC催化剂,采用原位漫反射红外等方法详细研究了其抗硫性能较好的原因.
　　首先采用离子交换法制备出 TiO2-PILC载体,之后采用浸渍法制备了不同钒含量(质量分数x/%=0,3,4,5)的xV2O5/TiO2-PILC催化剂.同时,制备了传统 V2O5/TiO2和 V2O5-MoO3/TiO2催化剂作为对比.活性评价结果显示,4V/TiO2-PILC催化剂具有最高的催化活性,其催化性能与传统钒钛催化剂相当.在160oC时, NO转化率可达80%以上.同时,4V/TiO2-PILC催化剂还具有较宽的反应温度窗口,在260–500oC范围内, NO转化率保持在90%以上.向反应体系中加入0.05% SO2和10% H2O后,在低温(160oC以下)时所有催化剂的反应活性都有一定提高,可能是由于 SO2的加入提高了催化剂的表面酸性.继续升高温度,4V/TiO2和4V6Mo/TiO2催化剂活性均明显下降,而4V/TiO2-PILC催化剂的活性则未出现明显下降.原位漫反射红外光谱结果显示, SO2在三种催化剂表面的吸附以表面硫酸盐或亚硫酸盐物种以及离子态 SO42–物种形式存在,而在4V/TiO2-PILC催化剂表面离子态 SO42–物种的量最少. X射线光电子能谱及 O2程序升温脱附结果显示,在4V/TiO2-PILC催化剂上,表面吸附氧(Oads)的量最少.综合上述分析可以得出,在 SO2气氛下,离子态 SO42–物种在 SCR催化剂表面的累积可能是导致其失活的主要原因,而离子态 SO42–物种的形成可能与催化剂表面吸附氧的量有关.     

过渡金属（Cu，Fe，Mn，Co）改性高分散V2O5/TiO2作为高效NH3-SCR脱硝催化剂

选择性催化还原(SCR)是目前固定源及移动源中控制NOx排放最为有效的技术手段之一.工业上应用最广泛的商业SCR催化剂是钒基催化剂.钒基催化剂经钨(钼)改性后具有较好的活性、稳定性和抗水抗硫性能,但在应用过程中仍存在N2选择性较低、活性温度窗口(300–400 oC)较窄及高温下V2O5极易流失等不足,且钨(钼)的价格十分昂贵.因此,用廉价组分提高钒基催化剂的催化性能在实际工业应用中仍具有重要意义.研究发现,很多非贵金属(如Cu, Fe, Mn, Co, Ce, Zr, Nb, Sn, La等)都可以代替钨(钼)用来提高钒基催化剂的选择性、活性温度窗口和(热)稳定性能等.引入的金属通常以氧化物或钒酸盐形式存在,并与活性组分钒物种有很强的相互作用,从而提高钒物种的氧化还原性能及分散度,同时增大表面酸性位数量,抑制锐钛矿向金红石相转变.近年来很多研究发现,经金属改性的钒基催化剂以钒酸盐形式存在时可有效提高催化剂活性和 N2选择性,尤其可显著提高催化剂的(热)稳定性.本文采用浸渍法以廉价易得、储量丰富的过渡金属改性钒基催化剂,得到高度分散的M-V/TiO2(M = Cu, Fe, Mn, Co)脱硝催化剂.结果发现, Cu-V/TiO2和Fe-V/TiO2催化剂表现出较好的催化活性和N2选择性以及优异的稳定性和抗H2O/SO2性能,其中Cu-V/TiO2的工作温度窗口扩展到225–375oC. X射线衍射、拉曼光谱和EDX-mapping表征结果证明,钒物种及引入的金属高度分散在TiO2载体表面,并生成了钒酸盐.氢气程序升温还原结果表明,钒酸盐的形成导致钒物种的还原峰向低温区移动,有利于催化剂氧化还原性能的提升. X射线光电子能谱结果表明, Cu-V/TiO2催化剂表面具有更多的活性氧物种(Oα),且具有较强的电子间相互作用,是SCR活性提高的关键原因之一. NH3程序升温脱附和原位红外光谱实验结果表明,金属的引入可以提高酸量和酸强度; Cu-V/TiO2催化剂表面主要为Lewis酸性位,而Fe-V/TiO2催化剂表面主要为Br?nsted酸性位,两者可能导致不同的SCR反应机理,但均可以提高催化剂在高温下的N2选择性.综上所述,过渡金属改性的钒基催化剂中Cu-V/TiO2具有最好的活性和N2选择性以及较强的稳定性和抗H2O/SO2性能,可能得益于其表面更多的活性氧物种和更多更强的酸性位.     

高能机械球磨法制备V-Ti-O超细微粒催化剂

负载型V2O5/TiO2氧化物催化剂因具有优良的催化性能而广泛地用于烃类选择性氧化[1,2]和氮氧化物选择性催化还原(SCR)[3]. 迄今,所研究的负载型V2O5/TiO2氧化物催化剂大多是采用浸渍法制备的[2,4～6],通过调整催化剂的组成[2,5]、引入适当的助剂组分[2,6]和选择适宜的反应操作条件[2,5]可进一步优化其催化性能.     

柠檬酸对Ni2P/TiO2-Al2O3催化剂加氢脱硫性能的影响

采用溶胶-凝胶法制备了TiO2-Al2O3复合载体,以柠檬酸(CA)为络合剂采用浸渍法制备了Ni2P负载的TiO2-Al2O3复合载体催化剂,并用X射线衍射(XRD)、N2吸附比表面积测定、H2程序升温氢还原(H2-TPR)、程序升温氧化(TPO)、X射线光电子能谱(XPS)技术对催化剂的结构和性质进行了表征,考察了CA/Ni摩尔比对在Ni2P/TiO2-Al2O3催化剂上进行的二苯并噻吩(DBT)加氢脱硫(HDS)性能的影响.结果表明:适量的CA可以丰富催化剂的孔道,提高催化剂的比表面积.当n(CA)/n(Ni)=2:1时,催化剂的比表面积达到126.75m2·g-1,与不加CA时相比,提高了57.05m2·g-1.调节n(CA)/n(Ni)能够改善活性相的分布,改变活性相的种类;引入CA使Ni和P前驱体的还原温度明显降低,促进活性相Ni2P的生成,一定程度上能够抑制催化剂表面炭的形成和沉积,提高其稳定性.n(CA)/n(Ni)=2:1时,催化剂具有最好的加氢脱硫活性,在360°C,3.0MPa,氢油比为500(V/V),液时体积空速为2.0h-1的条件下,二苯并噻吩转化率为99.5%,可将模拟油中硫含量由2%(w)降低到0.01%(w).     

Cu、Mn、Ce改性V2O5-WO3/TiO2/堇青石催化剂Urea-SCR脱除NO

采用硅胶为黏结剂,在堇青石蜂窝陶瓷上以涂覆法依次负载Cu、Mn、Ce改性的纳米TiO₂粉末、W改性的V₂O₅粉末得到复合催化剂,在120～550 ℃用尿素选择性催化还原(Urea-SCR)氮氧化物时显示良好活性。与商业催化剂V₂O₅-WO₃/TiO₂相比,添加Cu、Mn、Ce后,催化剂脱硝活性显著提高,活性温度窗口明显拓宽。结果表明,催化剂的高活性与催化剂表面适度的酸碱性、高比值的V⁴⁺/V⁵⁺以及良好的氧化还原性能和锐钛矿相的TiO₂、丰富的表面裂纹的存在等因素有关。     

钛白粉载体对选择性催化还原脱硝催化剂性能的影响

钛白粉(TiO2)是钒钛类选择性催化还原(SCR)脱硝催化剂的载体,TiO2的晶型、比表面积、粒度、孔结构以及SO42-和P2O5含量直接影响所制备的SCR催化剂的性能。一般而言,TiO2的比表面积越大,以其制备的SCR催化剂的比表面积也越大,活性也较高;但对于纳米级TiO2,由于颗粒粒径太小,容易发生烧结,而且形成钒钛化合物,导致催化剂比表面积较载体明显下降,因而活性降低。锐钛型TiO2由于比表面积大和不易被硫化,较金红石型TiO2适合做载体。多孔结构的TiO2使得钒物种在载体表面处于高度分散状态,从而提高催化剂的活性。TiO2中本身含有的少量SO42-和P2O5有助于提高催化剂的性能。     

Fe-Mn/Al2O3催化剂低温 NH3选择性催化还原 NO的性能

本文制备了一系列 Fe-Mn/Al2O3催化剂,并在固定床上考察了其 NH3低温选择性催化还原 NO的性能.首先考察了不同 Fe负载量制备的催化剂的脱硝性能,优选出最佳的 Fe负载量;在此基础上,研究了 Mn负载量对催化剂脱硝效率的影响;最后,对优选催化剂的抗 H2O和抗 SO2性能进行了实验研究;同时,对催化剂由于 SO2所造成的失活机制进行了考察.采用 N2吸附-脱附、X射线衍射、透射电镜、能量弥散 X射线谱、程序升温还原、程序升温脱附、X射线光电子能谱、热重和傅里叶变换红外光谱等方法对催化剂进行了表征.结果表明,最佳的 Fe和 Mn负载量均为8%,所制的8Fe-8Mn/Al2O3催化剂在150°C的脱硝效率可达近99%;同时,在整个低温测试区间(90–210°C)的脱硝效率均超过了92.6%. Fe在催化剂表面主要以 Fe3+形态存在,而 Mn主要包括 Mn4+和 Mn3+; Mn的添加提高了 Fe在催化剂表面的积累,促进了催化剂比表面积增大和活性物种分散,改善了催化剂氧化还原性能和对 NH3的吸附能力.催化剂的高活性主要是由于其具有较大的比表面积、高度分散的活性物种、增加的还原特性和表面酸性、较低的结合能、较高的 Mn4+/Mn3+和增强的表面吸附氧.此外,8Fe-8Mn/Al2O3的催化性能受 H2O和 SO2影响较小,抗 H2O和 SO2能力较强.同时,反应温度对催化剂的抗硫性有重要影响,在较低的反应温度下,催化剂抗硫性更好; SO2造成催化剂活性降低主要是由于催化剂表面硫酸盐物种的生成.一方面,表面硫酸铵盐的生成造成催化剂孔道堵塞和比表面积降低,减少了反应中的气固接触从而导致活性降低;另一方面,催化剂表面的活性物种被硫酸化,造成反应中的有效活性位减少,从而降低了催化剂活性.     

V2O5/TiO2-ZrO2催化剂上甲醇选择氧化制甲缩醛

采用共沉淀法制备TiO2-ZrO2复合氧化物载体、等体积浸渍法制备V2O5/TiO2-ZrO2催化剂,对催化剂在温和条件下甲醇选择氧化生成甲缩醛(DMM)反应进行研究.结果表明,与单一氧化物载体TiO2或ZrO2负载的钒基催化剂相比,V2O5/TiO2-ZrO2对甲醇选择氧化具有较好的催化性能.XRD、NH3-TPD和...     

CeO2/ACF的低温SCR烟气脱硝性能研究

在氧存在下以NH3为还原剂的选择性催化还原烟气NOX技术（SCR）已经工程化。工业中常用的催化剂，主要是V2O5／TiO2或V2O5-WO3／TiO2，在300℃～400℃表现出高的NOX脱除率。为此，选择性催化还原法（SCR）装置须安装在空气预热器之前和省煤器之后，以利用过程的烟气温度。但这里存在的高浓度粉尘和SO2容易引起催化剂中毒和使用寿命减少，因此，研究开发低温运行（〈300℃）的SCR催化剂，使催化反应器能布置在除尘或／和脱硫之后，具有重要意义。同时烟道废气的温度会因生产装置负荷的变化而有较大的波动，这就要求催化剂具有较宽的高活性温度区间。     

CuSO_4/TiO_2催化剂在氨选择性催化还原氮氧化物反应中的性能(英文)

氮氧化物(NO_x)是主要的大气污染物之一.氨气选择性催化还原法(NH_3-SCR)是目前去除固定源排放的氮氧化物的最有效方法,被广泛用于燃煤或者生物质的火电厂中.催化剂是NH_3-SCR法的核心,其中V_2O_5-WO_3/TiO_2催化剂是主要的商业SCR催化剂;但是V_2O_5有毒,对环境的影响很大;另外,该催化剂具有较高的SO_2氧化性能.因而研究者一直在探索新型的SCR催化剂.SO_2是燃煤电厂烟气中的典型气体之一,所以抗硫性能是催化剂的一个重要指标.在SCR反应条件下,SO_2和O_2容易与氧化物催化剂发生反应生成稳定性较高的硫酸盐,覆盖在催化剂表面从而引起催化剂失活.但已有研究发现,硫化会提高K中毒后的V_2O_5-WO_3/TiO_2催化剂的活性.并且,短时间的硫化可以明显提高CuO/Al_2O_3的NH_3-SCR活性.硫酸盐催化剂或许具有较低毒性和较高抗硫性能,应该是一种有前景的SCR催化剂.本文以商业纳米TiO_2为载体,采用湿式浸渍法制备了一系列的CuSO_4/TiO_2催化剂.在自制的活性评价装置上测试了样品的NH_3-SCR活性并且在340℃下连续24 h测试了SO_2、水蒸气及两者共同作用对催化剂活性的影响.使用N_2等温吸附-脱附、X射线衍射(XRD)、X射线光电子能谱(XPS)、H_2程序升温还原(H2-TPR)和NH_3程序升温脱附(NH_3-TPD)对催化剂进行了表征.另外,采用原位红外漫反射光谱研究了CuSO_4/TiO_2催化剂上的NH_3-SCR反应过程.N_2等温吸附-脱附结果表明,负载的CuSO_4没有明显改变载体的孔结构.而XRD结果仅显示锐钛矿TiO_2的衍射峰,说明CuSO_4在载体上有较好的分散度或者CuSO_4的含量低于检测限.XPS结果显示,催化剂中的铜主要以Cu~(2+)形式存在,硫主要以SO_4~(2-)形式存在,而氧主要以晶格氧和吸附氧两种形式存在,并且CuSO_4的存在会增加催化剂中吸附氧的含量.H_2-TPR结果表明,随着CuSO_4含量的增加,催化剂的氧化还原能力逐渐增强.NH_3-TPD结果表明,催化剂表面的酸性位数目随着样品中CuSO_4含量的增加而增加.纯TiO_2的NH_3-SCR活性很差,当温度从300℃增加到450℃时,最高NO_x转化率仅为32.7%.但当CuSO_4负载到TiO_2上以后,催化剂活性明显提高.在反应温度高于340℃时,CuSO_4/TiO_2催化剂的NO_x转化率在94%以上,与商业V_2O_5-WO_3/TiO_2催化剂相当,并且其N_2O生成量低于商业催化剂.不过,当温度低于340℃时,CuSO_4/TiO_2催化剂的NO_x转化率明显低于商业催化剂,说明CuSO_4/TiO_2催化剂的活性仍有待改善.连续24 h测试了SO_2、水蒸汽及两者的共同作用对CuSO_4/TiO_2催化剂活性的影响.结果显示,单独的水蒸气会导致活性轻微下降,但SO_2以及两者共同存在时对催化剂的活性基本没有影响.CuSO_4/TiO_2催化剂的NH_3吸附红外光谱表明,催化剂上存在Lewis和Bronsted两种酸性位,但Bronsted酸性位上的NH_4~+稳定性较差,280℃时即基本消失.在高温时,NH_3主要吸附在Lewis酸性位上且CuSO_4/TiO_2催化剂对NO_x的吸附能力较差,红外光谱未检测到NO_x的吸附峰.380℃下,当NO和O_2通入预吸附NH_3的催化剂样品时,属于Lewis酸性位上NH_3的红外峰明显下降,说明Lewis酸性位上吸附的NH_3参与了反应.CuSO_4/TiO_2显示出高的抗硫抗水性能和比较好的NH_3-SCR活性,应该是一种有应用前景的SCR催化剂.CuSO_4可以增加催化剂的酸性位数目和吸附氧量.根据原位红外漫反射结果,CuSO_4/TiO_2上的SCR反应遵循Eley-Rideal机理.气相的NO与吸附在Lewis酸性位上的NH_3反应生成N_2和H_2O或许是主要的反应途径,并且吸附氧可能会促进这个过程.