Enzymatic Synthesis and Characterization of Novel Polycarbonates Derived from 5-Allyloxy-1, 3-dioxan-2-one and 5, 5-Dimethvl-1.3-dioxan-2-one

Novel polycarbonates from 5-allyloxy-1, 3-dioxan-2-one （ATMC） with 5, 5-dimethyl- 1, 3-dioxan-2-one （DTC） were successfully synthesized for the first time using immobilized porcine pancreas lipase （IPPL） as catalyst. The resulting copolymers were characterized by IR, ^1H NMR, ^13C NMR and GPC. The molecular weight （Mn） of the copolymer with molar feed ratio of 10：90 （ATMC：DTC） was 9300 and the polydispersity was 1.31, while the Mn increased to 14300 and polydispersity of 1.25 with the feed ratio of 50：50. Moreover, the composition of the copolymers agreed well with the monomer feed.     

Fabrication of Hydrophilic and Sponge-like PVDF/Brush-like Copolymer Blend Membranes Using Triethylphosphate as Solvent简

Porous PVDF blend membranes with good hydrophilicity and a symmetric structure were prepared by the phase inversion method using amphiphilic brush-like copolymers, P（MMA-r-PEGMA）, as hydrophilic additive and triethylphosphate （TEP） as solvent. P（MMA-r-PEGMA） was synthesized by radical polymerization in TEP. Then the obtained amphiphilic copolymer solution was mixed with PVDF and TEP to prepare the dope solution. The effects of P（MMA-r-PEGMA） content and coagulation composition on membrane morphologies were investigated using scanning electron microscopy （SEM）. The results demonstrated that, even blended with amphiphilic copolymers, a symmetric structure can be formed. Hollow fiber membranes with a mainly symmetric structure were also fabricated. The dry hollow fiber membranes showed good hydrophilicity, high flux and good rejection performance because of their hydrophilic surface and pores wall.     

Crystal structure and DNA binding studies of a cobalt(Ⅱ) complex containing mixed-ligands of 1,10-phenathroline and glycollic acid

A cobalt（11） complex containing mixed-ligands of 1,10-phenathroline（phen） and glycollic acid（GA）.|Co（GA）₂（phen）| was synthesized and its structure was characterized by X-ray diffraction.The interaction of the complex with DNA was investigated by electronic absorption spectra and electrochemical methods.Electronic absorption spectrum experiments showed that after interaction with DNA.the characteristic absorption peaks of |Co（GA）₂（phen）| underwent hypochromic effect as well as redshift. Also,the binding strength of 3.8×10⁴L/mol was estimated by titration method.Electrochemical assays revealed that the redox peak currents of the complex decreased obviously accompanied by a positive shift of the formal potential after association with DNA.All these results revealed that the synthesized cobalt complex bound with DNA via an intercalation mode.     

Synthesis and Characterization of a Novel Acrylonitrile Copolymer Containing Glucose Pendants

In this work,a novel sugar-containing copolymer was synthesized by the copolymerization of α-allyl glucoside(AG) with acryloniutrile(AN).The copolymers were characterized by NMR Spectroscopy.It was found that acrylonitrile-based copolymers containing as high as 22wt.% of α-allyl glucoside can be synthesized by the free radical solution copolymerization of the two monomers in DMSO with AIBN as initiator.     

TUNED MECHANICAL PROPERTIES ACHIEVED BY VARYING POLYMER STRUCTURE — KNOWLEDGE THAT GENERATES NEW MATERIALS FOR TISSUE ENGINEERING

By changing both the monomer composition and the polymer structure, we have varied the mechanical properties of resorbable polymers. The polymers were synthesized by ring-opening polymerization using L-lactide （LLA）, ε-caprolactone （εCL）, trimethylene carbonate （TMC） and 1,5-dioxepan-2-one （DXO） as monomers. Well-defined triblock copolymers, microblock copolymers and networks have been evaluated, and comparisons between them show that it is possible to tune the mechanical properties. Triblock copolymers with an amorphous middle block of poly（1,5-dioxepan-2- one） （PDXO） and semi-crystalline end-blocks of poly（ε-caprolactone） （PCL） were stronger and had a higher strain at break than triblock copolymers with poly（L-lactide） （PLLA） as end-blocks. Polymers with both DXO and TMC in the amorphous middle-block and PLLA as end-blocks showed a lower stress at break, but the material gained elasticity, a property which is very valuable in tissue engineering. Mechanical properties of networks, synthesized by a novel method, containing PDXO and PCL are also presented. Although it is difficult to compare them with the uncross-linked polymers, this is an additional way to modify and widen the properties.     

Preparation of Medium Cation Exchange Stationary Phase of Polymeric Matrix and Their Chromatographic Properties

Based on the monodisperse poly（glycidyl methacrylate-co-ethylenedimethacrylate） beads （PGMA/EDMA） with macropore as a medium, a new hydrophilic medium cation exchange （MCX） stationary phase for HPLC was synthesized by a new chemically modified method. The stationary phase was evaluated with the property of ion exchange, separability, reproducibility, hydrophilicity, effect of salt concentration, salt types, column loading and pH on the separation and retention of proteins in detail. It was found that it follows ion exchange chromatographic （IEC） retention mechanism. The measured bioactivity recovery for lysozyme was （96 ± 5）%. The dynamic protein loading capacity of the synthesized MCX packings was 21.8 mg/g. Five proteins were almost completely separated within 6.0 min at a flow rate of 4 mL/min using the synthesized MCX resin. The MCX resin was also used for the rapid separation and purification of lysozyme from egg white with only one step. The purity and specific bioactivity of the purified lysozyme was found more than 95% and 70345 U/mg, respectively.     

Orthorhombic 3-LiV2O5 as Cathode Materials in Lithium Ion Batteries： Synthesis and Property

The rod-like and bundle-like v-LiV205 were synthesized via a simple solvothermal process- ing. The rod-like 7-LiV205 with diameter of 500-800 nm and the bundle-like architectures are composed of several of order-attached rods with diameter of 100-600 nm. ＂y-LiV205 were synthesized using LiOH.H20, NH4VO3, HNO3, C2H5OH without and with PVP as raw materials. At the same time, the actual formation mechanism of Y-LiV205 was also investigated. As the cathode materials for lithium ion batteries, the bundle-like Y-LiV205 prepared with PVP delivers a better electrochemical performance, which has an initial dis charge capacity of 269.3 mAh/g at a current density of 30 mA/g and is still able to achieve 228 mAh/g after the 20th cycle. The good electrochemical properties of the as-synthesized Y-LiV205 coupled with the simple, relatively low temperature, and low cost of the prepara tion method may make this material a promising candidate as a cathode material for lithium ion batteries.     

Synthesis and characterization of a novel polymer electrolyte based on acrylonitrile/N-[4-(aminosulfonyl)phenyl]acrylamide copolymers

<正>Acrylonitrile/N-[4-(aminosulfonyl)phenyl]acrylamide(AN/ASPAA) copolymers were synthesized and used as a host of lithium ion conducting electrolytes.The composition,molecular weight and molecular weight distribution of AN/ASPAA copolymers were determined,and the influence of copolymer composition on the glass temperature of AN/ASPAA copolymers and the ion conductivity of electrolytes were investigated.The molecular weights of AN/ASPAA copolymers were lower than those of AN and ASPAA homopolymers due to the cross-termination reaction.The glass temperatures of AN/ASPAA copolymers increased as the molar fraction of ASPAA units in copolymers increased.The lithium ion conductivities of the polymer electrolytes increased initially as the molar fraction of ASPAA units in copolymers increased,and a maximum conductivity was achieved when the molar fraction of ASPAA in the copolymer was 16.8%.     

Synthesis and Antibacterial Activity of Selenium-functionalized Poly(ε-caprolactone)

A selenium-functionalizedε-caprolactone was synthesized by introducing a phenyl selenide group at the 7-position.A polymer was obtained through the ring-opening polymerization of this monomer in a base/thiourea binary organocatalytic system.A living polymerization process was achieved under mild conditions.The resulting polymers had a controlled molecular weight with a narrow molecular weight distributions and high end-group fidelity.Random copolymers could be obtained by copolymerizing this monomer withε-caprolactone.The thermal degradation temperature of the obtained copolymers decreased with the increasing molar ratio of selenide functionalized monomer in copolymers,while the glass transition temperature increased.In addition,the phenyl selenide side group could be further modified to a polyselenonium salt,which resulted in a polymer with good antibacterial properties.The survival rate of E.coli and S.aureus was only 9%with a polymer concentration of 62.5μg/mL.     

Ladder-type Diindenopyrazine Based Conjugated Copolymers for Organic Solar Cells with High Open-circuit Voltages

A ladder-type diindenopyrazine （IPY） was synthesized and used as a building block for constructing conjugated copolymers. Three copolymers based on the IPY moiety were obtained via the Suzuki coupling reaction with dif- ferent monomers, including 4,7-dithien-2-yl-2,1,3-benzothiadiazole （DBT）, 5,8-dithien-2-yl-2,3-diphenylquinoxa- line （DTQ）, and 5,8-dithien-2-yl-2,3-di（4-fluorophenyl）quinoxaline （DFTQ）. The obtained polymers were charac- terized by 1H NMR spectroscopy, UV-Vis absorption spectroscopy, cyclic voltammetry, and gel permeation chro- matography （GPC）. Owing to the four solubilizing alkyl chains on the IPY unit, all the three copolymers have good solubility in common solvents. These polymers have deep-lying HOMO energy levels in the range of-5.55-5.60 eV, and exhibit field-effect mobilities as high as 0.006 cm2.V-l.s i. Photovoltaic applications of these polymers as light-harvesting and hole-conducting materials were investigated in conjunction with [6,6]-phenyl-C6rbutyric acid methyl ester （PC61BM）. Both conventional and inverted devices were fabricated based on these three polymers. A power conversion efficiency （PCE） of 2.53% and a high open-circuit voltage of 1.00 V were obtained under simu- lated solar light AM 1.5 G （100 mW/cm2） from an inverted solar cell with an active layer containing 25 wt% lad- der-type IPY containing copolymer （PIPYDTQ） and 75 wt% PC61BM. Moreover, a high open-circuit voltage of 1.02 V and a PCE of 2.40% were achieved from a conventional solar cell based on PIPYDTQ.     

Supercritical carbon dioxide assisted synthesis of amphiphilic graft copolymers based on poly(styrene-co-maleic anhydride) with methoxyl poly(ethylene glycol) side chains

Supercritical carbon dioxide（scCO₂） was used as a reaction medium in synthesizing amphiphilic graft copolymers composed of poly（styrene-co-maleic anhydride）（SMA） backbones and methoxyl poly（ethylene glycol）（MPEG） side chains via esterification.The synthesized copolymers were characterized by Fourier transform infrared spectroscopy（FTIR）,gel permeation chromatography（GPC）,¹H-NMR,thermo-gravimetric analysis（TGA） and differential scanning calorimetric analysis（DSC）.The gelation phenomenon was suppressed effectively by tuning reaction conditions.The influences of scCO₂ temperature and pressure on the conversion of anhydride were investigated.It was found that the highest conversion ratio occurred at 80℃under a constant pressure of 14 MPa or 26 MPa.With the increase of scCO₂ pressure,the conversion ratio increased first,and then leveled off.The conversion ratio of anhydride could be controlled by regulating the reaction conditions.It was also revealed that using low molecular weight MPEG brought a high conversion ratio of anhydride.     

Pervaporation for separating benzene/cyclohexane mixture by P(AA-MA) copolymer membranes

P(AA-MA)copolymers composed of acrylic acid and methyl acrylate with different molecular weights and sequence structures were synthesized by combination of ATRP and selective hydrolysis.These copolymers were used as membrane materials to separate benzene/cyclohexane mixture by pervaporation.The effects of molecular weight and sequence structure of the copolymers on the pervaporation performance were investigated in detail.For the random copolymers,the permeate flux decreased rapidly with the increasing of molecular weight.The separation factor was also influenced by the molecular weight,which was changed from no selectivity to cyclohexane selectivity with increasing the molecular weight.Contrarily,the block copolymer membrane showed good benzene selectivity with separation factor of 4.3 and permeate flux of 157 g/(m~2h)to 50 wt%benzene/cyclohexane mixture.     

A convenient,highly-efficient method for preparation of hydroxyl-terminated isotactic poly(propylene) and functional di-block copolymer

Both terminated functional isotactic polypropylene （iPP） and block copolymers containing iPP segment are desirable for commercial applications. This paper provides a convenient, highly-efficient method to prepare hydroxyl-terminated isotactic polypropylene （iPP-t-OH） and functional di-block copolymer containing the iPP segment through a combination of coordination polymerization and coupling reaction. The coordination polymerization was catalyzed by TiCI4/MgCI2/AIEt3 catalyst system using ZnEt2 as chain transfer agent. Further, the Zn-terminated iPP was oxidized and subsequently hydrolyzed to provide iPP-t-OH. Soxhlet extraction and 13C NMR were used to calculate the isotacticity of iPP-t-OH. The degree of polymerization and the number of hydroxyl groups at the chain end of iPP-t-OH were measured by GPC and 1H NMR. Despite the high molecular weight and heterogeneous reaction, iPP-t-OH is effectively linked with PEG-t-NCO to produce di-block copolymers. DSC analysis of the di-block copolymer shows an obvious decrease in Tm and To, which indicated that PEG was successfully linked to the terminal end of iPP.     

Synthesis, Purification and Characterization of Amphiphilic and Microphase Separated Graft Copolymer Polystyrene-g-Poly(ethylene oxide)

The present paper covers the poly (ethylene oxide) macromer with vinyl benzyl terminal group (PEO-VB) prepared by deactivation of the alkoxide function of mono-functional "living" PEO chains with vinyl benzyl chloride (VBC). The obtained macromers were subjected to careful purification and detailed characterization. A new kind of amphiphilic polystyrene-g-poly(ethylene oxide) (PS-g-PEO) with both mi-crophase separated and PEO side chains was synthesized from radical copolymerization of PEO-VB macromer with styrene monomer. An improved purification method, referred as "selective dissolvation", was established for the isolation of graft copolymers from the grafting products, and the purity and yield of the purified copolymers were satisfactory. The well-defined structure of the purified copolymers was confirmed by IR, 1H NMR and GPC. The bulk composition of the graft copolymers was determined by a well-established first derivative UV spectrometry. Various experimental parameters controlling the copolymeri     

Metal-flee synthesis of amphiphilic functional polycarhonates

Amphiphilic block copolymers of poly（5-benzyloxy trimethylene carbonate） （PBTMC） and poly（ethylene glycol） （PEG） were synthesized through enzymatic polymerization using immobilized porcine pancreas lipase （IPPL）. The obtained copolymers with different compositions were characterized by GPC and IH NMR. The copolymer composition was in agreement with the feed ratio. The molecular weight of the copolymers showed an increasing trend with the decrease of PEG contents. MiceUes of the copolymers were formed by dialysis procedure, and characterized by transmission electron microscopy （TEM）.     

Y-shaped block copolymers of poly(ethylene glycol) and poly(N-isopropylacrylamide) synthesized by ATRP

Novel Y-shaped block copolymers of poly(ethylene glycol) and poly(N-isopropylacrylamide),PEG-b-(PNIPAM)_2,were successfully synthesized through atom transfer radical polymerization(ATRP).A difunctional macroinitiator was prepared by esterification of 2,2-dichloroacetyl chloride with poly(ethylene glycol) monomethyl ether(PEG).The copolymers were obtained via the ATRP of N-isopropylacrylamide(NIPAM) at 30℃with CuCl/Me_6TREN as a catalyst system and DMF/H_2O(v/v = 3:1) mixture as solvent.The resulting copo...     

Synthesis of Poly(glutamic acid-co-aspartic acid) via Combination of N-carboxyanhydride Ring Opening Polymerization with Debenzylation简

The random copolymers of glutamic acid （LG） and aspartic acid （ASP）, poly（LG-co-ASP）, with designed compositions could be successfully synthesized via combination of N-carboxyanhydride ring opening copolymerization with debenzylation. Ring opening copolymerizations of y：benzyl-L-glutamate N-carboxyanhydride （BLG-NCA） and β-benzyl-Laspartate N-carboxyanhydride （BLA-NCA） were carried out by using different amines including triethylamine （TEA）, diethylamine, n-hexylamine （NHA）, triphenylamine, diphenylamine or aniline as initiators. All the 6 amines were highly efficient to get well-defined poly（BLG-co-BLA） copolymers with designed compositions although the polymerizations proceeded via different mechanisms （normal amine mechanism or/and activated monomer mechanism）, which are based on chemical structure of amines. The molecular weights of poly（BLG-co-BLA） copolymers could be mediated by both TEA concentration and polymerization time. Then, debenzylation ofpoly（BLG-co-BLA） copolymers was conducted to prepare the corresponding hydrophilic random eopolymers of poly（LG-co-ASP） with a-subunit structure in ASP structural units. The contents of LG structural units in poly（LG-co-ASP） copolymers matched with those of BLG-NCA in NCA-monomer feeds in ring opening copolymerizations initiated by NHA or TEA and were closed to the theoretical line. The diblock copolymer of poly（BLG-b-BLA） could also be synthesized via living NCA ring opening copolymerization by sequential addition of BLG- NCA and BLA-NCA.     

MOLECULAR DESIGN OF LIGHT EMITTING POLYMERS

Fluorene-based alternating and statistical copolymers were synthesized by employing reaction methods of Wittig,Heck and Suzuki. The copolymers were classified into three groups with the photoluminescence (PL) emission maxima at420, 475 and 500 nm, respectively. Statistical copolymers with two chromophores having PL emission maxima at 420 and475 nm emitted light with the emission maximum at 475 nm on photoexcitation at 365 nm and improved the quantumefficiency by the energy transfer. However, the intramolecular energy transfer was inefficient compared to the intermolecularenergy transfer when the two chromophores were apart from each other in the range of the Forster critical distance. Fluorene-pyridinedivinylene alternating copolymer was synthesized by the Wittig reaction and found to have physical, electronic andelectrochemical properties of the individual units intact. The double-layered light emitting diode (LED) with the statisticalcopolymer as an emitting layer and the pyridine-containing copolymer as an electron transporting-hole blocking layer, whichwere sandwiched between ITO and Al, displayed a quantum efficiency of 0.1%.     

Synthesis and Characterization of Novel Sulfonated Polyimides from 4,6-Bis（4-aminophenoxy）-naphthalene-2-sulfonic Acid

A novel sulfonated diamine monomer, 4,6-bis（4-arninophenoxy）-naphthalene-2-sulfonic acid（BAPNS）, was synthesized. A series of sulfonated polyimide copolymers was prepared from BAPNS, 1,4,5,8-naphthalenetetracarboxylic dianhydride（NTDA） and nonsulfonated diamine 4,4＇-diaminodiphenyl ether（ODA）. Flexible, transparent, and mechanically strong membranes were obtained. The novel sulfonated polyimide（SPI） membranes show higher conductivity, for example, SPI-100 shows a conductivity of 0.0698 S/cm at 80℃（SPI-X： Xrefers to molar fraction of BAPNS）. The membranes exhibit the permeability of methanol from 2.18×10^-7 cm2/s to 2.57×10^-7 cm2/s, which is much lower than that of Nafion（2.00×10 6 cm^2/s）. The copolymers were thermally stable up to 330℃. The sulfonated polyimide copolymers also show reasonable mechanical strength; for example, the maximum tensile strength at break of the sulfonated polyimide copolymer with 100%（molar fraction） BAPNS is 1.35 GPa under high moisture condi- tions. The optimum concentration of BAPNS was found to be 100%（molar fraction） from the view point of proton conductivity, methanol permeability, and membrane stability.     

PREPARATION AND SURFACE PROPERTIES OF ACRYLIC COPOLYMERS CONTAINING FLUORINATED MONOMERS

A series of copolymers comprising butylmethacrylate, styrene, butylacrylate, hydroxypropyl acrylate and perfluoroalkyl methacrylate were synthesized by the free radical polymerization using BPO as an initiator. The surface property of the copolymer films was subsequently characterized. The contact angle measurements and energy dispersive analysis of X-ray （EDAX） show that the length and content of perfluoroalkyl side chains in the copolymers are crucial for the preparation of the film with low surface energy. At a given content of fluorinated monomers in the copolymers, the longer the perfluoroalkyl side chain, the larger the water contact angle of the copolymer films will be. On the other hand, the higher the content of fluorinated monomers, the lower the surface energy is. The water contact angle increases with the increase of the fluorinated monomer content and reaches a plateau at 3 wt% of fluorinated monomer content.