CdTe量子点DNA荧光纳米探针的合成及表征

采用水相合成法合成了巯基乙酸(TGA)修饰的水溶性CdTe量子点,通过反相微乳液法制备了二氧化硅及壳聚糖修饰的核壳型复合荧光纳米粒子,将其与DNA吸附连接,得到CdTe量子点DNA荧光纳米探针。用扫描电镜、透射电镜、荧光光谱、红外光谱、紫外光谱、ζ电位等测试方法对产物的理化性质进行了分析表征。结果表明制备了表面富含氨基的复合荧光纳米粒子,其对DNA具有良好的吸附作用。     

核/壳型CdTe@SiO2荧光纳米复合粒子的制备与表征

利用反相微乳法, 以巯基乙酸修饰的水溶性CdTe量子点为核, 包覆SiO₂, 制备得到核壳型CdTe@SiO₂荧光纳米复合粒子. 用紫外-可见(UV-vis)分光光度计, 荧光(PL)分光光度计, 红外(FT-IR)光谱仪, 透射电子显微镜(TEM)等分析测试手段, 对得到的荧光纳米复合粒子的性能进行表征, 结果表明: 得到的CdTe@SiO₂纳米复合粒子是核壳型结构, 由SiO₂壳层包覆多个量子点, 其大小均匀, 水溶性好, 有效地提高了量子点的稳定性, 大大增强了其抗光漂白性能, 为该材料的进一步生物应用打下了良好的基础.     

CdTe纳米荧光探针的合成及其与DNA的相互作用

以巯基丙酸(RSH)为稳定剂,采用水相法合成了功能性CdTe纳米晶,并通过X射线衍射(XRD)和透射电镜(TEM)对其粒度和形貌进行表征。建立了一种以水溶性CdTe量子点作为荧光探针测定DNA的方法,当DNA浓度为0.2~40μmol.dm-3时,荧光强度与DNA浓度呈良好的线性关系,检测限为80nmol.dm-3,11次重复测定含有5.6μmol.dm-3的小牛胸ctDNA得到的相对标准偏差为3.4%。考察了CdTe量子点浓度、pH值、温度及作用时间等因素对DNA荧光强度的影响。研究发现CdTe纳米粒子与DNA之间存在强烈的相互作用,量子点的荧光猝灭与DNA浓度呈线性关系;作用机理研究表明,CdTe纳米粒子与DNA之间存在静电相互作用,且DNA对CdTe纳米粒子的猝灭为动态猝灭过程。     

石墨烯/CdTe量子点复合物的合成及在克伦特罗检测方面的应用

成功地合成了石墨烯/CdTe量子点复合物,并采用透射电镜、紫外吸收光谱、荧光发射光谱、荧光衰减曲线和X射线光电子能谱对产物进行了表征。透射电镜结果显示CdTe量子点被修饰于石墨烯的表面;X射线光电子能谱结果表示石墨烯在合成过程中被还原,还表明在所合材料的表面具有羧基和羟基;荧光发射光谱和荧光衰减曲线的结果显示将CdTe量子点修饰于石墨烯表面显著提高了CdTe量子点的荧光性能。此外,基于克伦特罗和石墨烯/CdTe量子点复合物之间形成的氢键,所合成材料可用于定量分析克伦特罗。克伦特罗对石墨烯/CdTe量子点复合物具有显著的猝灭作用,荧光强度的降低（F₀/F）与克伦特罗之间存在良好的线性关系,线性范围为7.22~108.30 μmol·L^-1,检出限为4 μmol·L^-1。     

石墨烯/CdTe量子点复合物的合成及在克伦特罗检测方面的应用

成功地合成了石墨烯/CdTe量子点复合物,并采用透射电镜、紫外吸收光谱、荧光发射光谱、荧光衰减曲线和X射线光电子能谱对产物进行了表征。透射电镜结果显示CdTe量子点被修饰于石墨烯的表面;X射线光电子能谱结果表示石墨烯在合成过程中被还原,还表明在所合材料的表面具有羧基和羟基;荧光发射光谱和荧光衰减曲线的结果显示将CdTe量子点修饰于石墨烯表面显著提高了CdTe量子点的荧光性能。此外,基于克伦特罗和石墨烯/CdTe量子点复合物之间形成的氢键,所合成材料可用于定量分析克伦特罗。克伦特罗对石墨烯/CdTe量子点复合物具有显著的猝灭作用,荧光强度的降低（F₀/F）与克伦特罗之间存在良好的线性关系,线性范围为7.22~108.30 μmol·L^-1,检出限为4 μmol·L^-1。     

Fe_3O_4/CdTe/聚氨酯纳米复合物的制备及其性能研究

由共沉淀法和Stober法制备了伯胺基功能化SiO2稳定的Fe3O4磁性纳米粒子Fe3O4@SiO2-NH2;Fe3O4@SiO2-NH2与二异氰酸酯及咪唑阳离子二醇、聚乙二醇的反应使其表面形成阳离子型聚氨酯稳定层;通过阳离子型聚氨酯与CdTe量子点表面修饰的巯基乙酸间的电荷相互作用,制备得到了Fe3O4/CdTe/聚氨酯纳米复合物.用X射线衍射(XRD)、红外吸收光谱(FTIR)、热重分析(TGA)、透射电子显微镜(TEM)、磁强计(VSM)、紫外吸收光谱(UV)、荧光发射光谱(PL)表征了该纳米复合物的结构与性能.结果表明,CdTe量子点均匀地分散在Fe3O4@SiO2磁性纳米粒子周围,所得纳米复合物在溶剂中分散均匀,不团聚,且具有超顺磁性,并保持了CdTe量子点的荧光性能.     

半胱胺包被的碲化镉量子点的直接水相制备及其与DNA链接

用半胱胺作为表面修饰剂,在水相中制备了稳定的CdTe纳米量子点。吸收光谱和荧光光谱表明,所合成的CdTe量子点具有优异的发光特性。透射电子显微境(TEM)表征了纳米微粒的结构和粒径分布。与目前较为普遍的用巯基羧酸等其它稳定剂在水相中合成的CdTe量子点相比,半胱胺包被的CdTe量子点的前驱体不需要加热就能受激发出荧光,在100℃加热20min后,荧光明显增强;而巯基羧酸包被的CdTe量子点前驱体受激不能发光。本工作还利用量子点上包被的半胱胺上的氨基,实现了与单链DNA分子的直接链接,链接后溶液的发射峰位红移19nm,荧光强度增强。     

表面修饰CdTe量子点的合成及其光学特性

在水相中合成高发光性能的CdTe量子点,研究以巯基乙酸(TGA)为稳定剂对CdTe表面进行修饰,制备在水中分散性良好的纳米晶,通过对CdTe量子点合成反应条件的摸索,掌握了其合成的反应规律.同时用紫外分光光度计、荧光分光光度计和透射电子显微镜对其进行了表征.结果表明,回流时间、n(Cd²⁺):n(HTe^-)、反应物浓度、TGA用量、反应体系pH值,对纳米晶的光学性质具有显著影响.回流2 h制得的CdTe纳米粒子直径约为5 nm,其发射峰窄且对称,表现出良好稳定的光学性质.     

CdTe量子点对胰凝乳蛋白酶的荧光标记

用巯基丙酸作为表面修饰剂在水相中制备了稳定的CdTe纳米量子点.利用量子点外层包被的巯基丙酸上的羧基,实现了量子点与胰凝乳蛋白酶的直接偶联.偶联后溶液的吸光度值略有增大而吸收峰位不变,同时荧光强度明显增强,荧光发射峰位稍有蓝移.通过荧光发射光谱确定了CdTe量子点与胰凝乳蛋白酶偶联的最佳反应条件为:pH 9.0,反应温度37℃,反应时间1.5 h.重点考察了NaCl浓度和胰凝乳蛋白酶浓度对量子点与胰凝乳蛋白酶偶联产物荧光强度的影响.     

不同环境因子作用下水溶性CdTe量子点的生长动力学研究

以硫普罗宁为稳定剂,水热法制备了水溶性CdTe量子点,系统研究了回流时间、反应物配比、pH值、反应温度和电解质种类等环境因子对量子点生长动力学及光物理性质的影响。结果表明,溶液的pH值及反应物配比对CdTe量子点的光物理性质均有重要影响。优化条件后,回流5 h可得到发射峰位于550 nm的CdTe量子点,其荧光量子效率高达52%;在氯化钠作用下,量子点生长加快,即高浓度氯化钠会减弱溶液中粒子间静电排斥,促进离子扩散,有利于量子点的生长;添加苯磺酸钠会抑制量子点的生长,有利于制备高荧光量子效率的小尺寸CdTe量子点。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.