（2＋1）维KP方程的三类精确解

研究了（2＋1）维KP方程的孤子解问题．应用Riccati方程映射法,得到了（2＋1）维KP方程的新的显式精确解的结构．根据得到的精确解结构,构造出了该方程的三类精确解．     

一类高阶非齐次发展方程的小波基数值分析

根据实际中存在的一类发展方程,首先论述了这种方程的物理背景,然后导出了在小波基下发展方程的数值解,并阐述了解的存在性．最后举例说明了这种方程小波基数值解的应用．     

电池系统建模中Butler-Volmer方程的同伦分析求解

Butler-Volmer方程是电化学系统中描述电极动力学过程的本构方程,具有强非线性．为了对这一方程(耦合两个Ohm方程)进行解析求解,在同伦分析方法的框架下,发展了满足简单条件的广义非线性算子的算法,以取代原同伦分析中的非线性算子．该广义非线性算子的构造保证了高阶形变方程的线性特征．这一方法的有效性通过一些算例得到了验证．最后通过同伦分析方法对Butler-Volmer方程进行了求解,结果显示过电位和电流密度的级数解析解与数值解吻合很好,并有很好的收敛效率．     

压电热弹性体的变分原理及正则方程和齐次方程

结合对偶变量理论,为压电热弹性体混合层合板问题推导了齐次的控制方程和Hamilton等参元列式．首先根据广义的Hamilton变分原理推导了压电热弹性体非齐次的Hamilton正则方程．然后进一步考虑了热平衡方程与导热方程中变量的对偶关系,通过增加正则方程的维数,成功地将非齐次的正则方程转化为能独立求解压电热弹性体耦合问题的齐次控制方程．为了推导四节点Hamilton等参元列式的方便,可将温度梯度关系类比成本构关系并构建新的变分原理．齐次方程大大简化了人们在分析压电热弹性体耦合问题时,通常要求解非齐次方程和关于平衡方程和导热方程的二阶微分方程的繁琐方法,同时也减少了数值计算工作量．     

第二梯度流体的蠕变流和热传导相似解

给出了在笛卡儿坐标系中,忽略惯性的缓慢流动的二维运动方程和二阶梯度流体的传热方程．当Re1时,若从运动方程中简单地省略惯性项,则结果方程的解仍然近似有效．事实上,从无量纲的动量和能量方程也可导出这一结论．利用李群分析,知道求得的方程是对称的．李代数包括4个有限参数和一个无限参数组成的李群变换,其中一个是比例对称变换,另一个是平移变换．利用对称性求得两种不同形式的解．利用x和y坐标的平移,给出了指数形式的精确解．对于比例对称变换,更多地涉及到常微分方程,只能给出级数形式的近似解,最后讨论了某些边值问题．     

任意流场中颗粒运动方程的通解(英)

给出了任意流场中颗粒运动方程的无因次和线性微分方程形式．估计了颗粒运动方程中的一些相关项．借助于一些数学推导和处理，求得了比线性颗粒运动方程的通解．     

电场驱动直射流的动量方程

给出了电场驱动直射流的一维动量守恒方程．该方程是用应力分量表示的,适用于任何流体本构关系,只要流体是不可压缩的．结果显示,为了使方程封闭,需要沿轴向和径向两个方向的本构关系．然而,当附加应力张量的迹为0时,只需要沿轴向的一个本构关系就足够了．还发现,射流的第二主应力差的零阶近似总为0．与其他类型的动量方程做了比较．     

共振条件下一类方程无界解和周期解的共存性

讨论了在共振条件下一类具有等时位势的方程无界解和周期解的共存性．利用Poincare映射轨道的性质,给出了无界解的存在性条件．在此条件下,Poincare-Bohl定理,得到了方程的一个周期解,进而说明共振条件下这类方程无界解和周期解的是可以共存的．最后,给出了一个无界解和周期解共存的具有等时位势的方程实例．     

Navier-Stokes方程与Euler方程的稳定性比较

比较了Navier-Stokes 方程和Euler方程的稳定性;并以它们的典型初值问题为例,分析了Navier-Stokes方程和Euler方程稳定性不同的原因．     

耦合Burgers方程的Painleve分析和相关性质

为研究耦合Burgers方程的可积性,利用WTC测试方法,给出了第一类Burgers方程的Painleve性质和第二类Burgers方程的条件Painleve性质．进而得到了第一类方程的变量分离解和第二类方程的（N2＋3N＋6/2）-参数Lie点对称群．     

Effects of permeability and viscosity in linear polymeric gels

We propose and analyze a mathematical model of the mechanics of gels, consisting of the laws of balance of mass and linear momentum of the polymer and liquid components of the gel. We consider a gel to be an immiscible and incompressible mixture of a nonlinearly elastic polymer and a fluid. The problems that we study are motivated by predictions of the life cycle of body‐implantable medical devices. Scaling arguments suggest neglecting inertia terms, and therefore, we consider the quasi‐static approximation to the dynamics. We focus on the linearized system about stress‐free states, uniform expansions, and compressions and derive sufficient conditions for the solvability of the time‐dependent problems. These turn out to be conditions that guarantee local stability of the equilibrium solutions. We also consider non‐stress free equilibria and states with residual stress and derive an energy law for the corresponding time‐dependent system. The conditions that guarantee stability of solutions provide a selection criteria of the material parameters of devices. The boundary conditions that we consider are of two types, displacement‐traction and permeability of the gel surface to the fluid. We address the cases of viscous and inviscid solvent, assume Newtonian dissipation for the polymer component, and establish existence of weak solutions for the different boundary permeability conditions and viscosity assumptions. We present two‐dimensional, finite element numerical simulations to study stress concentration on edges, this being the precursor to debonding of the gel from its substrate. Copyright © 2015 John Wiley & Sons, Ltd.     

颤振分析中的特征值排序问题

颤振分析中判断颤振临界速度的重要依据是系统V-g和V-f图,即系统特征值随参数的变化曲线.在几乎所有商用软件及自编程序的输出结果中,有时会出现所谓的"窜支"现象,这给颤振临界速度和颤振穿越分支及耦合形式的判断带来很大不便.通过隐函数定理可以证明,除重特征值点以外,系统特征值连续依赖于系统参数变化.依据多元向量值函数连续性,建立对特征值的排列算法,给出系统特征根轨迹的正确曲线,再输出V-g和V-f图数据,从而避免"窜支"现象.编制应用程序,通过几个典型算例对算法进行了验证.该工作能够有效简化颤振分析的后处理工作,提高分析效率.     

Boundary-Value Problems of the Theory of Thin and Nonthin Orthotropic Shells with Account of Nonlinearly Elastic Properties and Low Shear Rigidity of Composite Materials

The basic geometric and physical relations and resolving equations of the theory of thin and nonthin orthotropic composite shells with account of nonlinear properties and low shear rigidity of their materials are presented. They are derived based on two theories, namely the theory of anisotropic shells employing the Timoshenko or Kirchhoff-Love hypothesis and the nonlinear theory of elasticity and plasticity of anisotropic media in combination with the Lagrange variational principle. The procedure and algorithm for the numerical solution of nonlinear (linear) problems are based on the method of successive approximations, the difference-variational method, and the Lagrange multiplier method. Calculations of the stress-strain state for a spherical shell with a circular opening loaded with internal pressure are presented. The effect of transverse shear strains and physical nonlinearity of the material on the distribution of maximum deflections and circumferential stresses in the shell, obtained according to two variants of the shell theories, is studied. A comparison of the results of the problem solution in linear and nonlinear statements with and without account of the shell shear strains is given. The numerical data obtained for thin and nonthin (medium thick) composite shells are analyzed.     

Creep of polymer concrete in the nonlinear region

Two polyester-based polymer concretes with various volume content of diabase as an extender and aggregate are tested in creep under compression at different stress levels. The phenomenological and structural approaches are both used to analyze the experimental data. Common features of changes in the instantaneous and creep compliances are clarified, and a phenomenological creep model which accounts for the changes in the instantaneous compliance and in the retardation spectrum depending on the stress level is developed. It is shown that the model can be used to describe the experimental results of stress relaxation and creep under repeated loading. Modeling of the composite structure and subsequent solution of the optimization problem confirm the possibility of the existence of an interphase layer more compliant than the binder. A direct correlation between the interphase volume content and the instantaneous compliance of the composite is revealed. It is found that the distinction in nonlinearity of the viscoelastic behavior of the two polymer concretes under investigation can be due to the difference in their porosity. Submitted to the 11th International Conference on Mechanics of Composite Materials (Riga, June 11–15, 2000.) Translated from Mekhanika Kompozitnykh Materialov, Vol. 36, No. 2, pp. 147–164, 2000.     

Unsteady motion of a spherical bubble in a complex fluid: Mathematical modelling and simulation

The nonlinear response of an oscillatory bubble in a complex fluid is studied. The bubble is immersed in a Newtonian liquid, which may have a dilute volume fraction of anisotropic additives such as fibers or few ppm of macromolecules. The constitutive equation for the fluid is based on a Maxwell model with an extensional viscosity for the viscous contribution. The model is considered new in the study of bubble dynamics in complex fluids. The numerical computation solves a system of three first order ordinary differential equations, including the one associated with the solution of the convolution integral, using a fifth order Runge–Kutta scheme with appropriated time steps. Asymptotic solutions of governing equation are developed for small values of the pressure forcing amplitude and for small values of the elastic parameter. A study of the bubble collapse radius is also presented. We compare the results predicted by our model with other model in the literature and a good agreement is observed. The calculated asymptotic solutions are also used to test the results of the numerical simulations. In addition, the orientation of the additives is considered. The angular probability density function is assumed to be a normal distribution. The results show that the model based on the fully aligned additives with the radial direction overestimates the tendency of the additives to stabilize the bubble motion, since the effect of extensional viscosity occurs due to the particle resistance to the movement throughout its longitudinal direction.     

基于NSGA-Ⅱ的应急储备库多目标

应急物资储备库选址问题是在近年世界灾害多发的现实背景下产生的,根据具体选址问题特点建立了多目标选址决策模型。该模型综合考虑了两种灾害风险下储备库的成本费用、覆盖效率以及对重点地区的备用覆盖,以使模型更加符合实际目标及约束情况。算法设计上,首次采用带精英策略的非支配排序遗传算法(Fast and elitist Non-dominated Sorting Genetic Algorithm Ⅱ,NSGA-Ⅱ)解决储备库多目标选址问题,得到了Pareto非劣解分布并同不带精英策略的常规NSGA算法下的仿真结果进行对比分析。验证了模型的可行性以及NSGA-Ⅱ在解决储备库多目标选址问题的有效性。     

Variation of the structure and permeability of tensioned fiber layers during impregnation with a thermoplastic polymer melt

The influence of displacements of tensioned fibers on the impregnation of fibrous layers with a polymer melt and on the final composite structure is studied. Using computer simulation, it is shown that, during impregnation, the structure of tensioned fibrous layers changes considerably depending on the initial arrangement and tensioning of fibers. The consolidated regions formed under the melt front move inside the impregnated layer with the advancing melt front. Displacement of the tensioned fibers as well as the formation of “washouts” favors the impregnation of internal layers, but cause significant inhomogeneity of the polymer structure. The surface (on the side of the melt flow) regions are more saturated with the polymer than the internal ones. A difference in the melt percolation mechanisms at various impregnation regimes is revealed. The effective permeability coefficients of a tensioned fiber layer are not constant but depend on the conditions and regimes of impregnation. Submitted to the 11th Conference on the Mechanics of Composite Materials (Riga, June 11–15, 2000). Translated from Mekhanika Kompozitnykh Materialov, Vol. 36, No. 2, pp. 259–270, March–April, 2000.     

拍卖机制设计在区块链中的应用与挑战

区块链是新一代信息技术的重要组成部分,是分布式网络、加密技术、智能合约等多种技术集成的新型数据库软件。过去的十多年,区块链技术在全球范围内产生广泛影响。如今的区块链技术,已从最初的关注于解决货币和支付的去中心化问题,转入到解决市场的去中心化问题。智能合约的出现使得基于区块链技术的去中心化金融进入高速发展状态,也涌现出区块链环境下的各类拍卖场景。本文首次从机制设计角度,以区块链交易费机制,非同质化代币(Non-Fungible Token,NFT)拍卖和矿工可提取价值(Miner-Extractable Value,MEV)交易位置拍卖为主要对象,总结和剖析近些年来区块链上特有的拍卖机制;并针对区块链特性,提出区块链上拍卖机制设计所面临的挑战和未来亟待解决的问题。     

On the hyperbolicity of the period-doubling fixed point

We give a new proof of the hyperbolicity of the fixed point for the period-doubling renormalization operator using the local dynamics near a semi-attractive fixed point (in a Banach space) and the theory of holomorphic motions. We also give a new proof of the exponential contraction of the Feigenbaum renormalization operator in the hybrid class of the period-doubling fixed point: our proof uses the non-existence of invariant line fields in the period-doubling tower (C. McMullen), the topological convergence (D. Sullivan), and a new infinitesimal argument.

     

The Stokes phenomenon in the confluence of the hypergeometric equation using Riccati equation

In this paper we study the confluence of two regular singular points of the hypergeometric equation into an irregular one. We study the consequence of the divergence of solutions at the irregular singular point for the unfolded system. Our study covers a full neighborhood of the origin in the confluence parameter space. In particular, we show how the divergence of solutions at the irregular singular point explains the presence of logarithmic terms in the solutions at a regular singular point of the unfolded system. For this study, we consider values of the confluence parameter taken in two sectors covering the complex plane. In each sector, we study the monodromy of a first integral of a Riccati system related to the hypergeometric equation. Then, on each sector, we include the presence of logarithmic terms into a continuous phenomenon and view a Stokes multiplier related to a 1-summable solution as the limit of an obstruction that prevents a pair of eigenvectors of the monodromy operators, one at each singular point, to coincide.