便携式远程激光诱导击穿光谱系统及其定量分析性能

因高温、辐射等极端环境限制，核领域亟需具备在线快速检测特性的分析仪器。基于小型风冷脉冲激光器与小型光纤光谱仪实现了远程激光诱导击穿光谱技术（LIBS）装置的小型化，对该便携式远程LIBS系统的定量分析性能进行了研究，实现了5 m外样品的元素遥测。在单脉冲激光能量100 mJ，脉冲延时1.0 μs的分析条件下，实现了白水晶、陶瓷及铝合金样品中Mn、Si、Al、Na、Ba、Ca及Cr元素的激发，验证了LIBS技术对材料组分和物料成分的远程探测能力，对铝合金样品的定量分析结果显示，该远程遥测系统对铝合金样品定量测量结果的最大相对平均偏差为12%，具备执行核领域快速分析场景下的半定量检测能力。     

基于LIBS的GdFe合金材料快速检测技术研究

为了明晰LIBS（激光诱导击穿光谱）技术检测稀土合金材料的光谱特点,进一步开发基于LIBS的快速检测方法,推动LIBS技术在稀土领域的应用。本文利用激光诱导击穿光谱仪对GdFe合金材料的激发光谱,结合信号强度及背景噪音,研究确定了最佳设置参数。分别考察激光器和光谱仪的参数设置对光谱的影响,根据激发光谱中相关谱线的变化趋势,探讨GdFe合金材料的LIBS检测方法。实验发现,GdFe合金样品与激光孔(Laser aperture)的距离(Z值)、激光能量和积分时间是影响 LIBS光谱信号强度和背景噪音的关键参数。因金属和合金样品表面常覆盖氧化层,考察了脉冲激光的预剥蚀次数对光谱稳定性的影响,研究得出,在双脉冲均为164 mJ激光能量的激发下,预剥蚀1次可保证光谱效果。同时研究了两个激光器同时激发和延迟激发对GdFe合金光谱成因的影响,发现单脉冲激发与双脉冲同时激发所得光谱的信号强度并非两束脉冲单独激发的累加信号。通过光谱分析,确定了Z值0.8 mm、两个激光器的脉冲能量164 mJ、积分时间12 μs、脉冲延时时间0 μs,GdFe合金材料的光谱效果最佳,可为GdFe合金材料的LIBS检测方法建立提供参考,拓展LIBS技术在稀土领域的应用,为稀土合金产品的快速检测技术发展提供基础研究数据。     

微波辅助激光诱导击穿光谱对土豆中铅元素谱线强度的增强效果研究

研究了激光诱导击穿光谱(LIBS)对农产品中低浓度重金属元素的探测能力。土豆样品经过实验室污染处理,获得鲜样Pb元素含量范围在9.0~30.0 mg/kg的污染样品。再对样品进行烘干、粉碎、压片处理,以消除水分和样品基体效应对LIBS检测效果的影响。利用微波辅助LIBS(MA-LIBS)的方法对样品和激光烧蚀产生的等离子体进行加热,探讨了MA-LIBS对目标元素Pb的信号强度增强效果。实验结果显示,MA-LIBS能显著提高元素谱线的探测能力,对于Pb I 405.78 nm特征谱线,最低浓度的含Pb土豆样品谱线强度能提高6倍以上,其余样品也有类似的规律。说明M A-LIBS在提高目标元素探测能力上有巨大的发展潜力。     

激光诱导击穿光谱在煤质检测中的应用现状

我国当前主要能源仍是煤炭资源,煤质快速检测有利于其清洁高效利用。激光诱导击穿光谱（Laser-Induced Breakdown Spectroscopy,LIBS）作为一种快速光谱检测技术,具有样品需求量小、制样简便、可多元素同时测量等优点,其在煤质快速检测中的应用潜力已得到广泛认可。本文从激光诱导击穿光谱仪器（实验室台式、在线式和便携式）的研发现状、激光诱导击穿光谱对煤质（金属元素、非金属元素和工业指标）的检测现状、煤质分析性能提升方法,以及激光诱导击穿光谱定量分析模型研究等方面介绍了近几年来LIBS技术在煤质检测中的应用现状及未来展望。     

高分辨激光诱导击穿光谱技术用于碳质页岩光谱特征分析

碳质页岩是一种重要的非常规油气源岩,包含丰富的页岩气储存信息。在地质油气勘探领域,识别物性相近的碳质页岩是地质学的难题之一。为快速准确判别碳质页岩特性,本研究利用激光诱导击穿光谱( LIBS)技术对碳质页岩的光谱进行特征分析。以1064 nm纳秒脉冲激光作为激发光源,采用高分辨中阶梯光栅光谱仪配合ICCD搭建高分辨光学系统,利用LIBS装置分析四川盆地某井2396~3428 m不同深度处的5个典型碳质页岩样品,共获取碳质页岩中主量元素Si,Al,Fe,Ca,Mg,K和微量元素Cu,Cr,Ni,Sr,Mn,Ti,Rb等22种元素的350条发射谱线。基于高分辨LIBS系统采集的丰富谱线信息,采用主成分分析( PCA)法提取光谱贡献率最大的主成分得分二维图,识别不同类别碳质页岩样品,实现定性分析。结果表明,高分辨LIBS实验装置不仅可用于碳质页岩主量元素Si,Al,Fe,Ca,Mg,K等谱线分析,同时对微量元素如Ni,Cr,Mn,Sr等也具有很好的灵敏性。此外,LIBS技术与主成分分析( PCA)法结合可以更好地用于碳质页岩定性分析领域,提供科学的碳质页岩岩性判断数据和快速的分类手段,为页岩气开采和评估提供强有力的工具。     

激光诱导击穿光谱技术/多元二次非线性回归分析土壤中的铬元素

利用激光诱导击穿光谱(LIBS)技术对土壤中铬元素的含量进行了定量分析研究.由于土壤成分复杂,光谱谱线存在较严重的重叠干扰,若采用一元回归方法分析常得不到理想结果.为了更充分有效地利用光谱中信息,以土壤中Cr Ⅰ 425.43 nm和Fe Ⅰ 425.07 nm谱线的积分强度为自变量,Cr元素浓度为因变量,建立交叉降维近似多元非线性回归、多元二次非线性回归和平方降维近似多元非线性回归模型.对比分析表明,当添加Cr和Fe元素特征谱线强度交叉项影响时,所建立的多元二次非线性回归模型效果最佳,预测浓度与实际参考浓度之间线性关系达到0.9943,预测4个验证样品的相对误差分别为3.57％,0.76％,7.66％和2.24％.     

基于双脉冲LIBS结合偏最小二乘回归的稀土元素定量分析

激光诱导击穿光谱(LIBS)是一种以激光为激发源的等离子体发射光谱分析技术,已有将其用于稀土元素的定量分析研究,但由于稀土矿基体差异大、元素含量低,定量分析灵敏度和准确度仍有待提高。通过使用单激光分束构造双脉冲LIBS系统,并结合偏最小二乘回归(PLSR)算法实现对稀土矿石样品中的稀土元素La、Dy、Yb和Y的定量分析。结果表明,双脉冲LIBS结合PLSR可建立更加稳定的定标模型,与常规基本定标法相比,La、Dy、Yb和Y元素的相对均方根预测误差(RMSEP)从0.0061 %、0.0037%、0.0045%、0.0280 %降低至0.0044%、0.0016%、0.0029%、0.0134%,平均相对预测误差(AREP)从10.88%、15.27%、6.42%、17.20%降低至6.67%、3.62%、4.10%、7.98%。因此,双脉冲LIBS结合PLSR方法可以有效地提高LIBS对稀土矿石中稀土元素的定量分析能力。     

基于C++ Builder的激光诱导击穿光谱成分分析系统

正激光诱导击穿光谱(LIBS)是一种新型工业检测诊断技术~([1-2]),发射脉冲激光汇聚到样品表面激发出等离子体信号,利用光谱仪收集和分析得出样品成分、波长信息。该技术具有快速、无需制样、非接触等优势,在冶金分析领域具有广泛应用前景,可以优化炼钢工艺、提高生产效率、降低冶炼成本和节约资源~([3-5])。目前国内外LIBS方面的研究工作大多数集中在实验室环节,现场应用领域仍然局限于实验室或     

电化学富集-激光诱导击穿光谱（LIBS）法测定水中铀元素

为改善激光诱导击穿光谱技术(Laser-Induced Breakdown Spectroscopy, LIBS)检测液体样品时遇到的液体飞溅、等离子体猝灭和稳定性差的问题,结合电化学富集方法,以KCl为电解质,石墨棒为阴极,开展了水中铀(U)元素的LIBS检测研究。选择UⅡ367.007 nm、UⅡ409.013 nm作为分析对象进行定量分析,着重研究了富集电压、KCl质量浓度、激光脉冲能量、激发方式等对铀元素特征谱线强度的影响规律,并通过扫描电子显微镜(SEM)及能谱分析(EDS)对石墨棒表面吸附元素的空间分布进行了分析。结果表明,最佳富集电压为1.6 V,适当的电解质KCl质量浓度可以提高铀元素的富集效率和富集均匀性,提高激光脉冲能量与采用光电双脉冲激发方式能增强铀元素特征谱线的强度并提高信噪比。在光电双脉冲激发下,对水中铀元素进行了定量分析,获得UⅡ367.007 nm、UⅡ409.013 nm的检测下限分别为25.89和15.00μg/L,相关系数均大于0.98。方法可为水体中放射性核素含量调查、生活饮用水铀污染现状以及核工业含铀废水监测等场景提供技术支持。     

激光诱导击穿光谱(LIBS)法微损快速检测党参中Pb

中药材重金属元素快速检测对污染监控及人们健康具有重要意义。激光诱导击穿光谱技术(Laser Induced Breakdown Spectroscopy, LIBS)属于一种快速检测方法,研磨压片等预处理方法相对样品消解已有所简化,但破坏了样品的物理性质,且不能满足中药材大宗品种、大批量检测需求。若进一步简化样品预处理,将更加凸显LIBS快速检测的优势。本文建立了激光诱导击穿光谱技术(LIBS)快速微损检测中药材样品重金属元素定标方法。线性相关系数R2为0.7764,建立的微损定标曲线线性可用于切片党参LIBS快速检测,对待测党参切片样品检测平均相对误差为3.74%,与电感耦合等离子体质谱法(ICP-MS)对比,相关系数R2为0.7957,验证了LIBS技术微损检测的可行性。制备的党参参考定标样品可多次重复用于待测样定标和仪器标定等。实验对待测党参样品仅进行切片处理,避免了研磨、压片等预处理,更加充分地体现LIBS快速检测的优势,为LIBS技术应用于中药材重金属元素快检等领域提供了一种新方法。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.