超短脉冲激光同位素分离

同位素的分离极为重要。传统的分离方法是气相分离法。文章详细介绍了有别于该方法的两种激光同位素分离方法。其基本原理是利用离心分离作用产生同位素的分离。具体说来就是,一个旋转等离子体柱在一定条件下达到流体力学平衡时,其中的同位素离子沿径向将形成高斯密度分布。质量数越高的离子,密度分布的高斯半径越大,从而在径向形成具有不同丰度的同位素分布。理论和实验表明,该方法能产生较高丰度的同位素,具有良好的实用化前景。     

Study on a low loss, low voltage, polarization-independent EO modulator based LPG

In this paper, a new type of high-speed EO modulator is presented. It is a multi-cladding structure with LPG written in the core, and polymer with high EO coefficient is fabricated as the outer layer. A special material with ultra-negative temperature coefficient is used for the temperature compensation. This modulator is polarization independent, it can be coupled with the optical fiber very easily and can work steadily with low voltage, high speed, is temperature insensitive, and its cost is low. To our knowledge, this is the first time a modulator has been designed with such a simple and effective structure.     

基于空间光调制器的HDR图像获取方法

提出一种利用空间光调制器对物方光线进行调制并多次曝光的方法来获取HDR图像.讨论了该方法的原理,并根据原理搭建实验装置进行了实验.实验装置中以LCOS作为空间光调制器,以CMOS作为成像传感器,通过多次曝光获得系列图像,利用图像合成算法生成HDR图像.该方法具有实时性好、扩展性强、成本较低等优点.     

一种少投影光学层析新算法及其应用

研究少投影数情况下等离子体温度场重建问题。结合光学层析重建算法及等离子体光谱诊断中的谱线绝对强度法进行自由电弧等离子体温度场重建实验。理论上，详细讨论了一种基于最大熵准则及最优化原理的光学层析图像重建新算法。通过计算机数值模拟，考察了该算法对非对称温度场分布的重建效果。详细分析了投影噪声、投影方向数、场分布性质对重建精度的影响，并与代数迭代重建算法结果进行对比．结果表明，该算法以两个正交方向投影数据重建单峰余弦模拟场平均误差仅为0.3％，而代数迭代重建算法为3．81％；该算法以四个均匀角度间隔投影数据重建三峰随机高斯模拟场平均误差为1．77％，而代数迭代重建算法为2．02％。实验中，运用该算法结合谱线绝对强度法重建了自由电弧等离子体的温度分布。     

6H-SiC的飞秒激光超衍射加工

利用飞秒激光直写微纳加工平台, 对6H-SiC材料进行了突破衍射极限的微纳结构加工研究. 使用中心波长和脉宽分别为800 nm和130 fs的钛蓝宝石激光器和荧光倒置显微镜搭建了飞秒激光直写微纳加工平台, 研究了在不同的实验条件下对6H-SiC的光学加工情况, 采用扫描电子显微镜对加工结构进行表征. 通过分析不同的激光功率和不同的曝光时间等实验条件下加工的分辨率, 发现分辨率随着激光功率的减小而提高, 随扫描速度的增大而提高, 且能突破光学衍射极限. 最终获得125 nm的加工线宽, 并加工了加工线宽240 nm, 周期1.0 μm的线阵列. 研究结果为微机电系统(MEMS)的微器件设计开创了新的思路, 对发展MEMS器件具有重要意义. 关键词： 飞秒激光直写 超衍射加工 6H-SiC 微机电系统     

横向行波偏转结构中电磁场分布及腔间耦合系数的理论研究

 模拟分析了横向行波偏转结构中传播的HEM₁₁波的特性,并与加速模式TM₀₁进行了比较。设计并加工完成了该偏转结构的实验腔,用谐振微扰法测出了中间腔的横向场分布曲线,并与HFSS模拟结果进行了比较,模拟结果和测试结果一致,其横向场的最大值在偏离轴心径向的中间位置。用HFSS模拟了腔的色散特性,对有稳定孔和没有稳定孔的情况进行了比较,用谐振法对实验腔的色散特性进行了测试,测试结果和模拟结果一致。通过对等梯度偏转结构等效电路的简化,给出了等阻抗结构的等效电路,定性分析了此偏转结构的腔间耦合情况,计算了腔间耦合系数,模拟结果和测试结果一致。     

石英玻璃微球吸收光谱上的结构共振

通过CO2激光器熔融不同直径的熔锥光纤以得到相应直径的石英玻璃微球,利用此微球和熔锥光纤,构造了球微腔耦合系统。实验中利用光腰直径为3.1μm的熔锥光纤与直径为143.1μm的石英玻璃微球进行耦合,通过最大分辨力为1pm的可调谐半导体激光器对该耦合系统进行光谱扫描,发现石英玻璃微球的吸收光谱中出现分立的结构共振峰。利用光学微球腔理论讨论了石英玻璃微球吸收光谱中的结构共振,并用米氏散射理论公式对一阶TE模共振峰的位置以及它们的间隔进行了计算,共振峰位置实验结果与理论结果的误差仅为0.03%,表明实验与计算结果相符。     

一维粗糙地表面下方埋藏目标SAR成像

提出一种快速实现一维粗糙地表面下方埋藏金属目标的成像算法.用层内波传播算法结合谱加速的前后向迭代算法(PILE+FB-SA)计算一维粗糙面下方埋藏金属目标的后向散射;用得到的后向散射数据结合后向投影算法实现二维SAR(synthetic aperture radar)成像,研究窗函数的选取,讨论目标位置及尺寸大小变化的影响.用具有高斯谱的粗糙面模拟实际地表面,并采用锥形波入射以减小人为截断粗糙面引起的边缘效应.由于散射数据由快速数值算法得到,该算法不受地面和目标参数限制,可以实现任意粗糙地表面和复杂目标成像,对地下目标探测具有重要的应用价值.     

Optical design for enhanced prism type fingerprint scanner image contrast with asymmetrical aspheric lens

The design of optical prism fingerprint scanner with aspheric lens is researched. We propose a modified structure for optical prism fingerprint scanner, which has an asymmetrical aspheric lens on the output plane. It is numerically shown under elliptic valley similar fingerprint model that the optical image qualities of such a scanner are better than the scanner with symmetrical aspheric lens. When the fingerprint range is 15 mm, the results show that the minimum image contrast is 0.49 for an optical prism with asymmetrical aspheric lens, much better than a symmetrical aspheric lens with 0.20. The relative illumination variation is from 0.62 to 1.00 for optical prism with asymmetrical aspheric lens, and for the symmetrical aspheric lens it is 0.35 to 1.00. We conclude that an optical prism with asymmetrical aspheric lens is better than an optical prism with symmetrical aspheric lens.     

星载高分辨率超光谱成像仪分光方式的选择

从多个方面分析了棱镜和光栅色散分光的优缺点,分析结果表明棱镜更适于星载高分辨率超光谱成像仪的分光。在透过率方面,棱镜光谱仪透过率高达95.24％(VNIR),而光栅的衍射效率仅为60%~70%。在杂散光方面,棱镜光谱仪的杂散光可达10－4,而光栅的杂散光为10－2。在0.4 －2.5 范围,棱镜光谱仪相对光栅光谱仪有优越性。在色散线性方面,光栅光谱仪基本线性,棱镜光谱仪的短波非线性问题可通过复合棱镜进行补偿。可靠性方面,棱镜光谱仪较光栅光谱仪有优势;在光谱带宽和成本方面,棱镜光谱仪与光栅光谱仪基本接近。     

二维Janus结构的PdSSe/石墨烯接触特性的第一性原理探究

Janus结构由于其两侧的原子不同,存在一个内建电场.在本工作中,将具有Janus结构的六角PdSSe与石墨烯复合,构成范德瓦尔斯异质结构.通过基于密度泛函理论的第一性原理计算对其几何结构和电子结构进行了研究.计算中考虑了两种堆叠方式,即Se侧与石墨烯接触和S侧与石墨烯接触.当S侧与石墨烯接触时,体系具有更小的平衡间距和更大的电荷转移,结合能更低. S侧与石墨烯接触时形成了为n型欧姆接触;Se侧与石墨烯接触时形成了势垒极低的n型肖特基接触.最后,讨论了垂直应变对接触特性的影响.通过施加垂直应变,PdSSe/石墨烯的接触类型具有显著的可调性.     

基于传输矩阵法讨论光疏介质表面的全反射

探究了光在光密介质与超薄光疏介质界面处的全反射,通过在光密介质中嵌入一光疏介质薄层,利用传输矩阵法,定量地分析了入射角度以及光疏介质的厚度对反射率的影响.数值模拟结果表明,当光疏介质的厚度小于约一个波长时,即使入射角大于全反射的临界角,反射率也不一定会达到1,也就是说,光学隧道效应将会出现.     

Shower age in correlation with zenith angle

The variation of lateral shower age parameter with zenith angle for different shower size ranges is studied. The observed variation is in agreement with the electron-photon cascade theory and with the other EAS observations. It is found that up to zenith angle 30°, shower ‘age’ is practically independent of zenith angle. So it is difficult to correlate the reported high ‘age’ value of the excess showers from the direction of plausible point sources with zenith angle. The change in the value of shower age with atmospheric depth is studied and is found to be consistent with the prediction of cascade theory and simulation results. From the study of the variation of shower age with shower size for two different zenith angle intervals it is found that the shower age decreases with size but the rate of change of shower age decreases at higher sizes.     

用扫描近场光学显微镜技术研究金膜表面等离体子共振

表面等离体子波(SPW)可与入射光横磁波极化能量耦合并被共振激发,这种现象被称为表面等离体子共振现象(SPR)。主要利用扫描近场光学显微镜(SNOM)技术和表面等离体子共振现象技术相结合,来研究金膜表面等离体子共振。设计并建立了结构独特的新型Kretschmann型表面等离体子共振现象耦合装置,同时又设计了具有厚度梯度的表面等离体子的制备方法。在此基础上,测量了改变入射角条件下的表面等离体子共振曲线,测得该装置的等离体子共振角灵敏度为1°。并且对金膜表面进行表面等离体子共振条件下的扫描近场光学显微成像。实验结果表明,在共振时金膜表面的扫描成像比不共振时清晰,而且增加了很多细节。应用表面等离体子共振现象技术将可以明显提高扫描近场光学显微镜的信噪比、分辨力等性能。     

Sound reduction by barriers on the ground

An existing theory on the propagation of spherical sound waves over ground with a finite acoustic impedance is to a large extent verified by field measurements over different types of ground surfaces. It is then shown that it is reasonable to combine this theory with ordinary diffraction theory to get a solution of the mixed problem with a barrier on the ground. Full-scale measurements have been carried out with a 3 m high wall and the results show good agreement with the predicted values. It is also shown that it is generally of minor importance whether a thin screen is sound absorbing or not.     

中心波长121.6nm的真空紫外窄带滤光片设计和制备

采用双半波法布里-珀罗(F-P)干涉滤光片结构设计了中心波长在121.6 am的窄带滤光片,其峰值透射率为6.78%,通带半宽度为10.7 nm.通过设计、制备和测量峰值波长在217 nm的滤光片验证了设计用到的光学常数和膜厚定标都比较精确.在此基础上制备了121.6 nm的窄带滤光片,到合肥同步辐射实验室测量的结果是中心波长在120.74 nm,峰值透射率为5.94%,通带半宽度为12 nm.可以看出实际制备的滤光片和预先设计的基本吻合但还是有一定的偏差,最后对实际测量的和理论设计的偏差进行了分析.     

Thermo-optically driven adaptive mirror for laser applications

An adaptive mirror is investigated that is based on the deformation of the reflective surface due to thermal expansion of an underlying material that can be locally heated with an external light source. The mirror is made from a glass plate coated with a 1-mm-thick layer of a material with a large thermal expansion coefficient that was finally sputter coated with a thin gold film. The adaptive mirror is thermo-optically heated with an incandescent lamp. To generate the desired temperature pattern an aperture mask is used. The deformation of the adaptive mirror is measured with a Michelson interferometer. It is shown that the spatial resolution and amplitude of the deformation are sufficient for the application as an adaptive mirror. As a possible application the suitability of this mirror type as part of a laser resonator to generate a super-Gaussian mode is discussed. PACS 42.60.Jf; 42.60.By; 42.79.-e     

Estimating the nonlinear resonant frequency of a single pile in nonlinear soil

Analytical expressions are determined for the nonlinear resonant frequency (or natural frequency) of the fundamental lateral mode of a pile. A pile with a floating toe, with and without pile cap is considered in this paper. The influence of a nonlinear soil spring model that varies with depth and a nonlinear damping model that is strain amplitude dependent is considered. A non-dimensional equation of motion for the system dynamics is derived from an energy based formulation. This equation is a Duffing's type nonlinear differential system that has nonlinear damping. Harmonic balance with numerical continuation is employed to determine the nonlinear resonance curves of the system. Comparison with some experimental results is made.     

SPH方法对金属表面微射流的数值模拟

 光滑粒子流体动力学（Smoothed Particle Hydrodynamics）方法是一种无网格的拉氏计算方法,具有计算格式简单、易于计算大变形问题等优势。用二维SPH程序模拟了冲击加载下金属铝表面的沟槽状缺陷产生微射流的过程,得到了喷射物的总质量、最大速度和质量-速度曲线。还计算了相同深度、不同夹角的沟槽微射流,并与实验结果进行了比较。结果表明：计算得到的喷射物总质量和最大速度与实验结果符合较好,SPH方法对于估算金属表面的微射流提供了一种有效的数值模拟手段。     

二维不规则形状发热型缺陷的红外识别算法

对带有自身发热型缺陷的试件建立二维传热模型,利用有限元法进行求解,研究试件表面的温度分布规律,并根据共轭梯度法提出根据试件外表面红外测温,定量识别发热型内部缺陷边界轮廓的方法.数值实验证明了算法的有效性.对所研究缺陷类型,导热系数较小的试件识别精度较高;温度测量误差、测温点数目及缺陷轮廓初值假设对识别结果的影响可以忽略;检测表面最大温差越大,识别精度越高.