胆固醇分子印迹的聚合有机凝胶及其吸附性能研究

报道了一种新型胆固醇分子印迹的聚合有机凝胶.以3-胆固醇酰氧基丙酸(COPA)为模板分子,通过可聚合凝胶剂N-十八烷基马来酰胺酸(ODMA)在甲基丙烯酸β-羟乙酯、甲基丙烯酸和聚乙二醇二甲基丙烯酸酯混合溶液的自组装,首先形成稳定的超分子有机凝胶,经UV光引发原位聚合,再经乙醇提取模板分子后制得胆固醇非共价印迹的聚合有机凝胶.偏光显微镜(POM)和场发射扫描电镜(FE-SEM)表明ODMA在单体混合物中自组装形成带状聚集体,这为其后形成的印迹聚合有机凝胶的孔穴稳定性提供了保证.印迹聚合有机凝胶对胆固醇的吸附效率可达到64%,并与ODMA和COPA的含量有关.实验表明,当ODMA的含量由1wt%增加到3 wt%时,吸附量由15.7 mg/g增加到22.9 mg/g.当COPA的含量由4 wt%增加到7 wt%时,吸附量由16.8 mg/g增加到22.2 mg/g.然而,当ODMA含量过多时,吸附量反而下降,这主要归因于体系网络密度的增加导致扩散阻力增加.而COPA含量过多时,可能干扰ODMA的自组装,影响印迹孔穴的稳定性,同样使得吸附量下降.     

胆固醇分子印迹聚合有机凝胶的制备及其选择性吸附研究

以N-十八烷基马来酰胺酸(ODMA)为凝胶剂,在甲基丙烯酸β-羟乙酯、甲基丙烯酸、聚乙二醇二甲基丙烯酸酯和模板分子3-胆固醇酰氧基丙酸(COPA)混合物中自组装形成稳定的超分子有机凝胶,经UV原位光聚合,乙腈提取模板分子制备了胆固醇非共价印迹聚合有机凝胶.吸附实验在水/THF中进行.结果显示胆固醇非共价印迹聚合有机凝胶...     

Interpenetrating polymer networks templated on bicontinuous microemulsions containing silicone oil, methacrylic acid, and hydroxyethyl methacrylate

Polydimethylsiloxane-poly(methacrylic acid—hydroxyethyl methacrylate) interpenetrating polymer networks (PDMS-P(MAA–HEMA) IPN) were formulated and polymerized simultaneously from bicontinuous microemulsion templates. Microemulsions containing reactive silicone oils and MAA/HEMA in aqueous solution were stabilized with silicone surfactants, and were then reacted at 50 °C for 3 h under an N₂ atmosphere. The formation of bicontinuous morphology was confirmed by laser scanning confocal microscopy, reversible swelling behavior, differential scanning calorimetry, texture analysis, and permeability to vitamin B₁₂ in aqueous solution. Incorporating polymerizable surfactants into the microemulsion aided in stabilizing the initial microemulsion structure during polymerization, yielding a more uniform IPN morphology with domain sizes of <200 nm at equilibrium swelling. The process developed here demonstrates a simple, single-step polymerization approach to forming IPNs from low viscosity microemulsion templates, and could potentially be extended to a variety of hydrophilic and hydrophobic monomers.     

Synthesis of Molecularly Imprinted Polymers for Nevirapine by Dummy Template Imprinting Approach

Nevirapine (NVP) and its structurally related analogs including nicotinamide (NAM), benzamide (BZM) and benzophenone (BZP) were used as templates in the synthesis of molecularly imprinted polymers for NVP. Molecular modeling was used to estimate binding energy of the complex formation between methacrylic acid (MAA) monomer and the selected templates, while equilibrium binding studies were applied to evaluate the polymer binding efficiency. The data indicated that NAM is the best candidate to prepare MIPs for retaining NVP due to a relatively similar binding energy between the NVP–MAA and NAM–MAA complex. The NAM-imprinted polymer showed a high binding affinity and selectivity toward NVP. When the polymer was applied as a sorbent in solid-phase extraction of NVP from human plasma, high recovery and reproducibility were obtained.     

接枝微球PMAA-HEMA/NVP对溶菌酶的吸附行为与吸附机理

采用反相悬浮聚合法制备了甲基丙烯酸羟乙酯(HEMA)与N-乙烯基吡咯烷酮(NVP)的交联共聚微球HEMA/NVP,然后采用"接出"法,实施了甲基丙烯酸(MAA)在交联微球表面的接枝聚合,制得了接枝微球PMAA-HEMA/NVP.以溶菌酶(LYZ)为模型碱性蛋白,深入研究了接枝微球PMAA-HEMA/NVP对碱性蛋白的吸附性能与吸附机理.测定了微球PMAA-HEMA/NVP的zeta电位,考察了PMAA接枝度、介质pH值及离子强度等因素对体系吸附性能的影响.结果表明,在较大的pH范围内,接枝微球PMAA-HEMA/NVP的zeta电位为绝对值较大的负值,即其表面携带有高密度的负电荷.在强静电相互作用的驱动下,接枝微球PMAA-HEMA/NVP对溶菌酶表现出很强的吸附能力.随介质pH值的增高,接枝微球对溶菌酶的吸附容量呈现先增大后减小的变化趋势,在与溶菌酶等电点接近的pH值处(pH=9),具有最大的吸附容量(90mg.g-1);离子强度对接枝微球的吸附能力也有较大的影响,当pH9时,溶菌酶吸附容量随NaCl浓度的增高而减小;当pH9时,吸附容量随NaCl浓度的增高而增大.     

多壁碳纳米管表面对硝基苯酚印迹复合材料的制备与吸附性能

以多壁碳纳米管表面接枝的L-苯丙氨酸为结合位点, 甲基丙烯酸为功能单体, 乙二醇二甲基丙烯酸酯为交联剂, 采用沉淀聚合技术, 在碳纳米管表面制备了对硝基苯酚印迹复合材料. 采用红外光谱和扫描电镜研究了该印迹复合材料的结构和形貌, 结果表明, 在碳纳米管表面接枝了一层稳定的印迹材料. 采用高效液相色谱研究了该印迹材料的等温吸附性能, 结果表明, 该印迹材料对模板分子具有较大的吸附容量(Qmax=80.5 μmol/g)和良好的选择吸附性能(选择因子达2.5). 以该印迹材料作为固相萃取吸附剂, 研究了它对对硝基苯酚和其它结构类似物混合溶液的动态吸附性能, 结果表明, 印迹复合材料对对硝基苯酚的吸附容量不受结构类似物浓度的影响, 能较好地应用于对硝基苯酚的分离富集检测.     

Synthesis of Molecularly Imprinted Polymers for Nevirapine by Dummy Template Imprinting Approach

Nevirapine (NVP) and its structurally related analogs including nicotinamide (NAM), benzamide (BZM) and benzophenone (BZP) were used as templates in the synthesis of molecularly imprinted polymers for NVP. Molecular modeling was used to estimate binding energy of the complex formation between methacrylic acid (MAA) monomer and the selected templates, while equilibrium binding studies were applied to evaluate the polymer binding efficiency. The data indicated that NAM is the best candidate to prepare MIPs for retaining NVP due to a relatively similar binding energy between the NVP–MAA and NAM–MAA complex. The NAM-imprinted polymer showed a high binding affinity and selectivity toward NVP. When the polymer was applied as a sorbent in solid-phase extraction of NVP from human plasma, high recovery and reproducibility were obtained.

     

Adsorption and controlled release of Chlortetracycline HCl by using multifunctional polymeric hydrogels

Adsorption and controlled release of Chlortetracycline HCl to and from multifunctional polymeric materials (HEMA/MAA) hydrogels were investigated. P(HEMA/MAA) hydrogels were synthesized by gamma radiation-induced copolymerization of 2-hydroxyethylmethacrylate (HEMA) and methacrylic acid (MAA) in aqueous solution. The influence of copolymer composition and pH value of the surrounding medium on the type of water diffusion into the glassy polymer were discussed. Drug, Chlortetracycline HCl containing hydrogels, with different drug concentration to polymer ratios, was loaded by direct adsorption method. The influence of MAA content in the gel on the adsorption capacities of hydrogel was studied. Chlortetracycline HCl adsorption capacity of hydrogels was found to increase from 8 to 138 mg Chlortetracycline HCl per gram dry gel with increasing amount of MAA in the gel system and drug concentration. The effect of pH on the releasing behavior of Chlortetracycline HCl from gel matrix was investigated. In vitro drug release studies in different buffer solutions show that the basic parameters affecting the drug release behavior of hydrogel are the pH of the solution and MAA content of hydrogel.     

Enantioselective ester hydrolysis catalyzed by imprinted polymers

Highly cross-linked network polymers prepared by molecular imprinting catalyzed enantioselectively the hydrolysis of N-tert-butoxycarbonyl phenylalanine-p-nitrophenyl ester (BOCPheONP). The templates were designed to allow incorporation of the key catalytic elements, found in the proteolytic enzyme chymotrypsin, into the polymer active sites. Three model systems were evaluated. These were constructed from a chiral phosphonate analogue of phenylalanine (series A, C) or L-phenylalanine (series B) attached by a labile ester linkage to an imidazole-containing vinyl monomer. Free radical copolymerization of the template with methacrylic acid (MAA) and ethylene glycol dimethacrylate (EDMA) gave a highly cross-linked network polymer. The templates could be liberated from the polymers by hydrolysis, giving catalytically active sites envisaged to contain an enantioselective binding site, a site complementary to a transition state like structure (series A, C), and a hydroxyl, imidazole, and carboxylic acid group at hydrogen bond distance. As predicted, the enantiomer of BOCPheONP complementary to the configuration of the template was preferentially hydrolyzed with D-selectivity for the series A polymers (kD/kL = 1.9) and L-selectivity for the series B polymers (kL/kD = 1.2). The maximum rate enhancement, when compared with a control polymer, prepared using a benzoyl-substituted imidazole monomer as template, was 2.5, and comparing with the imidazole monomer in solution, a maximum rate enhancement of 10 was observed. The catalytic activity was higher for polymers subjected to the nucleophilic treatment. This was explained by a higher site density and flexibility of the polymer matrix caused by this treatment. In a comparison of template rebinding to polymers imprinted with a template containing either a carboxylate (planar ground state structure) or a phosphonate (tetrahedral transition state like structure) functionality, it was observed that imprinted polymers are able to discriminate between a transition state like and a ground state structure for transesterification. However the influence of transition state stabilization on the observed rate enhancements remains obscure. Only at acidic pH's was catalysis observed, whereas at basic pH's the polymers inhibit the reaction. At a later stage, the catalytic activity of the polymers for nonactivated D- and L-phenylalanine ethyl esters was investigated. A rate enhancement of up to 3 was observed when compared to the blank. Most important, however, the polymers imprinted with a D template preferentially hydrolyzed the D-ethyl ester and exhibited saturation kinetics.     

Core‐stabilized polymeric micelle as potential drug carrier: increased solubilization of taxol

Poly(ethylene glycol‐b‐lactide) possessing a methoxy group at the poly(ethylene glycol) (PEG) chain end and a polymerizable methacryloyl group at the poly(lactic acid) (PLA) chain end (MeO–PEG/PLA–methacryloyl) was prepared by an anionic ring‐opening polymerization of ethylene oxide and DL ‐lactide in tandem manner initiated with a potassium 2‐methoxyethanolate, followed by end‐capping with an excess of methacrylic anhydride. The molecular weight of the obtained polymer was controlled by the initial monomer/initiator ratio, which was confirmed by the combination of gel permeation chromatography and nuclear magnetic resonance analyses. The functionality of the methacryloyl–PLA end was almost quantitative. The MeO–PEG/PLA–methacryloyl (38/35; these numbers in parentheses denote the molecular weights of PEG and PLA segments divided by 100, respectively) formed a core–shell type spherical micelle in aqueous media obtained by a dialysis technique, the cumulant diameter of which was ca. 30 nm with very low polydispersity factor. The methacryloyl group adjacent to the PLA was polymerized in the PLA core of the micelle. The polymerization proceeded thermally with radical initiator and photochemically with photo‐initiator to produce core‐polymerized nanoparticles, which was found by spectroscopic and light‐scattering techniques. Taxol‐incorporated micelles were prepared to entrap Taxol into MeO–PEG/PLA–methyacryloyl block copolymer micelles by the oil/water emulsion method. Copyright © 1999 John Wiley & Sons, Ltd.     

Chemical graft polymerization of sulfobetaine monomer on polyurethane surface for reduction in platelet adhesion

Surface modification is an effective way to improve the hemocompatibility and remain bulk properties of biomaterials. Recently, polymer tailored with zwitterions was found having good blood compatibility. In this study, the zwitterionic monomer of sulfobetaine was graft polymerized onto polyurethane (PU) surface in a three-step heterogenous system through the vinyl bonds of acrylic acid (AA) or hydroxyethyl methacrylate (HEMA), which was immobilized with hexamethylene diisocyanate (HDI) beforehand. First, PU was activated with isocyanate groups using HDI as coupling agent. Second, AA or HEMA was introduced through reaction of AA or HEMA with NCO groups bonded on PU surface. Last, zwitterionic monomer of sulfobetain was graft polymerized with vinyl group of AA or HEMA using AIBN as polymerization initiator. The reaction process was monitored with ATR-IR spectra and XPS spectra. Variation of graft yield with temperature and monomer feed concentration was investigated and feasible conditions were optimized. The wettability of films was investigated by water contact angle measurement and water absorbance. Platelet adhesion experiment was conducted as a preliminary test to confirm the improved blood compatibility of PU. The number of platelets adhering to PU decreased greatly comparing with the originals after 1 and 3 h of contact with human plate-rich plasma (PRP).     

Development and characterisation of a molecularly imprinted polymer prepared by precipitation polymerisation for the determination of phenylurea herbicides

New materials based on molecularly imprinted polymers (MIPs) have been developed for use as sorbents in solid phase extraction to preconcentrate some urea herbicides. In the preconcentration step, different molecularly imprinted polymers were tested using methacrylic acid (MAA) and 2-(trifluoromethyl)acrylic acid (TFMAA) as functional monomers, and linuron and isoproturon as templates. The best results were obtained when the polymer was synthesised using MAA with isoproturon as template. Another parameter evaluated was the way in which the polymer was obtained. We observed that the imprinted polymers obtained by precipitation displayed a greater capacity to retain the phenylureas. Studies conducted using scanning electron microscopy (SEM) revealed that the bulk polymerisation method is far from ideal owing to the random shape and size distribution of the particles obtained, whereas when polymerisation was carried out in precipitation microspheres were obtained. In order to confirm the interaction between the functional monomer and the template, 1H NMR (CD2Cl2) analyses were conducted. The results obtained suggest that the hydrogen and/or nitrogen of the amino group of the template would be involved in the formation of hydrogen bonds with the functional monomer. The imprinted polymer obtained by precipitation polymerisation with MAA as functional monomer and isoproturon as template can be applied to preconcentrate phenylureas when the sample is dissolved in toluene. The proposed methodology was employed to evaluate polymer selectivity towards humic acids and towards other herbicides.     

Hollow-fiber membranes coated with polymerizable bicontinuous microemulsions

A new method has been successfully employed to prepare hollow-fiber membranes by coating and polymerizing bicontinuous microemulsions onto the internal surfaces of hollow-fiber membranes. The bicontinuous microemulsion consisting of water, a polymerizable zwitterionic surfactant of acryloyloxyundecyl dimethylammonio acetate, methyl methacrylate, and 2-hydroxylethyl methacrylate (HEMA) can form a transparent polymer thin film after polymerization. The hollow-fiber membranes as the supports for microemulsion coatings were fabricated from the spinning solution of polyethersulfone/diethylene glycol/N-methyl-2-pyrrolidone. The microemulsion coated hollow-fiber membranes were evaluated by the separation efficiency and the permeation rate of polyethylene glycol (PEG) solutions. The performance of coated membrane on the PEG separation is strongly dependent on the concentration of HEMA and water in precursor bicontinuous microemulsions. The pore size of the hollow-fiber membranes can be regulated between about 2 to 40 nm by varying the composition of precursor bicontinuous microemulsions. The characteristics of the coated membranes is believed to be directly related to the bicontinuous structures of precursor bicontinuous microemulsions. The use of polymerizable bicontinuous microemulsions enable one to better control the microstructures of coated membranes via in situ polymerization.     

Charged polystyrene nanoparticles: role of ionic comonomers structures

Emulsion copolymerizations of styrene were carried out with four structurally different ionic comonomers namely acrylic acid (AAc), methacrylic acid (MAA), 2-hydroxyethyl methacrylate (HEMA), and sodium styrene sulfonate (NaSS) to study the effect of monomer structure on the copolymerization kinetics and size, morphology, charge density, and the self-assembly of the particles. The copolymerization kinetics was found to be highly dependent upon the ionic comonomer structure, and the nature of this dependence altered from homogeneous to micellar nucleation regime. The decrease in particle size (D) with increasing surfactant concentration (S) was observed in all the cases; however, the exponents of D vs. S were not similar for all the cases. In the homogeneous nucleation regime, exponents followed the order as AAc (0.446) > MAA (0.396) > NaSS (0.252) > HEMA (0.241), whereas the order was almost reversed in the micellar nucleation regime as NaSS (0.406) > HEMA (0.228) > AAc (0.206) > MAA (0.172). The hydrophobic/hydrophilic character and the steric factors were found to be the driving force for the variation in D vs. S exponents with ionic comonomer structure. The presence of charges on the particle surface contributed by the ionic comonomers triggered the self-assembly of the particles upon sedimentation and diffracted visible light obeying Bragg's law.     

Computational Design and Fabrication of Enantioselective Recognition Sorbents for L-phenylalanine Benzyl Ester on Multiwalled Carbon Nanotubes Using Molecular Imprinting Technology

Computational strategies have been employed to investigate the influence of the nature of monomers and cross-linker in order to design three dimensional imprinted polymers with selective recognition sites for L-phenylalanine benzyl ester(L-PABE) molecule.Here, computational chemistry methods were applied to screen the molar quantity of functional monomers that interact with one mole of the template molecule. Effects of the nature of functional monomer, cross-linker, and molar ratio were determined computationally using density functional calculations with B3LYP functional and generic 6-31G basis set. Methacrylic acid(MAA) and ethylene glycol dimethacrylate(EGDMA) were used as the functional monomer and crosslinking agent, respectively. L-PABE imprinted polymer layered on multiwalled carbon nanotube(MWCNT) and conventional bulk MIP were synthesised and characterized as well. To investigate the influence of pre-organization of binding sites on the selectivity of L-PABE, respective non-imprinted polymers were also synthesised.MWCNT-MIPs and MIPs exhibited the highest adsorption capacity towards L-PABE. The synthesized polymers revealed characteristic adsorption features and selectivity towards L-PABE in comparison with those of its enantiomer analogues.     

Polyreactions in ordered systems: Polymerization of octadecyl methacrylate in monolayers at the gas–water interface

The ultraviolet-initiated polymerization of octadecyl methacrylate (ODMA, octadecyl 2-methyl-2-propenoate) as a monomolecular layer at the gas-water interface was studied. The polymerization was carried out at 27°C at the nitrogen-water interface; air inhibits the polymerization. At 27°C the ODMA monolayer exhibits three different states which were characterized by surface pressure-area diagrams and by surface potential measurements. The ODMA monolayer was polymerized under constant surface pressure in the range between 0 and 10 dyne/cm. The polymerization was followed by recording the contraction of the film. The conversion was determined by comparison of the area per monomer unit during polymerization with the area of mixed monolayers formed from ODMA and poly-ODMA as well as by infrared spectroscopy. The polymerization in the condensed state of the monolayer (at high surface pressure) is considerably faster than in the expanded state (at low surface pressure). As the polymer has a condensing effect on the monomer in the mixed monolayer, autocatalysis is suggested at low surface pressures. The resulting polymer was studied by x-ray diffraction. The structure of the freshly collapsed film is determined by the conformation of the polymer at the interface; the data after crystallizing the same sample from the melt point to higher tacticity of the poly-ODMA prepared in monolayers than that of poly-ODMA prepared by normal radical polymerization in solution.     

In situ photopolymerization of a polymerizable poly(ethylene glycol)-covered phospholipid monolayer on a methacryloyl-terminated substrate

We have prepared a chemically anchored monolayer of PEG (poly(ethylene glycol)) and phospholipid mixture (PEG/phospholipid) on a methacryloyl-terminated substrate by in situ photopolymerization. Both monoacryloyl phospholipid (acryloyl-PC, 1-palmitoyl-2-[12-(acryloyloxy)dodecanoyl]-sn-glycero-3-phosphocholine) and monoacryloyl PEG (acryloyl-PEG, 12-(acryloyloxy)dodecanoyl-PEG) were synthesized by modifyingphospholipid and PEGwith 12-(acryloyloxy)-1-dodecanoic acid and 12-(acryloyloxy)-1-dodecanol, respectively. The surface pressure-area (pi-A) isotherm showed that acryloyl-PEG molecules were stable in the phospholipid monolayer and that they could be evenly inserted into a phospholipid monolayer at the air/water interface. By adding 10 mol % acryloyl-PEG into phosholipid vesicles, we could produce a PEG/phosholipid monolayer on methacryloyl-terminated substrates using vesicle fusion for 3 h. Then, this polymerizable PEG/phospholipid monolayer was in situ photopolymerized onto a methacryloyl-terminated substrate with eosin Y/triethanolamine as co-initiators. Optimal vesicle fusion and irradiation condition were determined with respect to the vesicle fusion time and duration of irradiation. As confirmed by atomic force microscopy and X-ray reflectivity studies, the polymerized PEG/phosholipid surface formed a PEG-covered phospholipid monolayer with thicknesses of 3 and 6 nm for the base phospholipid monolayer and the covering PEG layer, respectively. The chemical anchoring efficiency ofpolymerized PEG and phospholipid molecules, which was calculated by the relative carbon ratio of each surface before and after methanol washing using X-ray photoelectron spectroscopy, was 98%. This polymerized PEG/phosholipid monolayer showed good stability in organic solution due to firm chemical anchoring to a solid surface.     

A Novel Estimation Method of the Distribution of Carboxyl Groups Within Copolymer Particles Using Isothermal Titration Calorimeter

Summary: A novel quantitative method using isothermal titration calorimeter (ITC) for the estimation of the distribution of carboxyl groups within polymer particles has been proposed. The method has been employed to clarify the difference in the distribution between the particles prepared by batch emulsion copolymerization of styrene and methacrylic acid under inefficient and efficient stirring conditions. At inefficient stirring, monomer was floating as a layer on the aqueous medium, whereas at efficient stirring, the monomer phase was dispersed as droplets. Under inefficient stirring, methacrylic acid (MAA) polymerized faster than styrene (S) due to a slower diffusion rate of S than MAA into the aqueous medium, while under efficient stirring, S and MAA copolymerized at similar rates. ITC measurement showed that under inefficient stirring, the carboxyl groups were distributed mainly in the center of the particles, and their number decreased toward the surface. On the other hand, under efficient stirring, carboxyl groups were distributed homogeneously inside the particle.     

Dual‐templates molecularly imprinted monolithic columns for the evaluation of serotonin and histamine in CEC

To extend the application of molecularly imprinted polymers, the dual‐templates molecularly imprinted monolithic columns were developed in a capillary format. Two templates serotonin and histamine were simultaneously imprinted using two different functional monomers such as methacrylic acid (MAA) and methylenesuccinic acid (MSA) in a mixture of ethylene glycol dimethacrylate (EDMA) as a cross‐linker and AIBN as polymerization initiator dissolved in DMF as porogen. The resulting molecular imprinted polymers (MIPs) were characterized based on their performance in the CEC separation of two imprinted templates. The optimization parameters such as pH, ACN composition, and concentration of the eluent were varied to achieve best resolution and efficiency for CEC separation of templates with each MIP column. It was found that the MIP monolith column fabricated using MSA offered better resolution and separation efficiency compared to column fabricated with MAA. This work utilized the dual‐templates imprinting approach successfully and broadens the scope of multi‐templates imprinting capabilities in capillary format in CEC application.     

基于金属卟啉的甲基磷酸二甲酯分子印迹聚合物微球的合成及性能

合成了分别以5-(4-甲基丙烯酰氧苯基)-10,15,20-三苯基锌卟啉(ZnMOTPP)和5-(4-甲基丙烯酰氧苯基)-10,15,20-三苯基钆卟啉(GdMOTPP)为功能单体, 甲基丙烯酸(MAA)为辅助功能单体的甲基磷酸二甲酯(DMMP)分子印迹聚合物微球. 扫描电子显微镜(SEM)表征结果表明, 微球平均粒径为50～100 μm, 粒度均匀. 与甲基丙烯酸作为功能单体的分子印迹聚合物微球的吸附性能和特异性进行对比发现, ZnMOTPP分子印迹微球的吸附性能优于 GdMOTPP分子印迹微球, 金属卟啉分子印迹微球的吸附性能优于仅以甲基丙烯酸作为功能单体的分子印迹微球, 并且微球对其印迹分子DMMP具有特异性吸附. Scatchard分析表明, DMMP分子印迹空穴中只存在一类结合位点, MIPMs-Zn+MAA的最大吸附量Q_max=148 μmol/g, MIPMs-Gd+MAA的Q_max=78.9 μmol/g, MIPMs-MAA的Q_max=13.57 μmol/g.