Simulated equation of state of CaF2 with fluorite-type structure at high temperature and high pressure

The pressure-volume-temperature (P-V-T) equation of state (EOS), isothermal bulk modulus, and thermal expansivity of CaF₂ with cubic fluorite-type structure are investigated using the constant temperature and pressure shell model molecular dynamics (MD) method with effective pair potentials which consist of the Coulomb, dispersion, and repulsion interaction. It was shown that MD simulation is very successful in accurately reproducing the measured volumes of the CaF₂ over a wide range of pressures. The simulated P-V data matched X-ray diffraction experimental results up to 9.5 GPa at 300 K. In addition, volume thermal-expansion coefficient and isothermal bulk modulus were also calculated and compared with available experimental data and the latest theoretical results at ambient condition. At extended temperature and pressure ranges, The P-V EOS under different isotherms at selected temperatures, T-V EOS under different isobars at selected pressures, thermal expansivity, and isothermal bulk modulus were predicted up to 1500 K and 10 GPa. The detailed knowledge of thermodynamic behavior and EOS at extreme conditions are of fundamental importance to the understanding of the physical properties of CaF₂.     

High-pressure and high-temperature bulk modulus of cubic fluorite-type MgF2 from quasi-harmonic Debye model

A detailed theoretical study of the isothermal and adiabatic bulk moduli of MgF₂ with a fluorite structure under high pressure and temperature has been carried out by means of first-principles density functional theory calculations combined with the quasi-harmonic Debye model in which the phononic effects are considered. Particular attention is paid to the prediction of the isothermal bulk modulus and its first and second pressure derivatives for the first time. The calculated ground state properties agree well with other theoretical values. At extended pressure and temperature ranges, the variation of the bulk modulus which plays a central role in the formulation of approximate equations of state has also been predicted. The properties of MgF₂ with a fluorite structure are summarized in the pressure range of 0–135 GPa and the temperature up to melting temperature 1500 K.     

Magnetic characterization of Mn5SiB2 and Mn5Si3 phases

In this work the Mn₅Si₃ and Mn₅SiB₂ phases were produced via arc melting and heat treatment at 1000 °C for 50 h under argon. A detailed microstructure characterization indicated the formation of single-phase Mn₅Si₃ and near single-phase Mn₅SiB₂ microstructures. The magnetic behavior of the Mn₅Si₃ phase was investigated and the results are in agreement with previous data from the literature, which indicates the existence of two anti-ferromagnetic structures for temperatures below 98 K. The Mn₅SiB₂ phase shows a ferromagnetic behavior presenting a saturation magnetization M_s of about 5.35×10⁵ A/m (0.67 T) at room temperature and an estimated Curie temperature between 470 and 490 K. In addition, AC susceptibility data indicates no evidence of any other magnetic ordering in 4-300 K temperature range. The magnetization values are smaller than that calculated using the magnetic moment from previous literature NMR results. This result suggests a probable ferrimagnetic arrangement of the Mn moments.     

Hydrostatic pressure study of the structural phase transitions and superconductivity in single crystals of (Ba1−xKx)Fe2As2 (x=0 and 0.45) and CaFe2As2

We studied the effect of hydrostatic pressure (P) on the structural phase transitions and superconductivity in the ternary and pseudo-ternary iron arsenides CaFe₂As₂, BaFe₂As₂, and (Ba_0.55K_0.45)Fe₂As₂, by means of measurements of electrical resistivity (ρ) in the 1.8-300 K temperature (T) range, pressures up to 20 kbar, and magnetic fields up to 9 T. CaFe₂As₂ and BaFe₂As₂ (lightly doped with Sn) display structural phase transitions near 170 and 85 K, respectively, and do not exhibit superconductivity in ambient pressure, while K-doped (Ba_0.55K_0.45)Fe₂As₂ is superconducting for T<30 K. The effect of pressure on BaFe₂As₂ is to shift the onset of the crystallographic transformation down in temperature at the rate of ~−1.04 K/kbar, while shifting the whole ρ(T) curves downward, whereas its effect on superconducting (Ba_0.55K_0.45)Fe₂As₂ is to shift the onset of superconductivity to lower temperatures at the rate of ~−0.21 K/kbar. The effect of pressure on CaFe₂As₂ is first to suppress the crystallographic transformation and induce superconductivity with onset near 12 K very rapidly, i.e., for P<5 kbar. However, higher pressures bring about another phase transformation characterized by reduced-resistivity, and the suppression of superconductivity, confining superconductivity to a narrow pressure dome centered near 5 kbar. Upper critical field (H_c2) data in (Ba_0.55K_0.45)Fe₂As₂ and CaFe₂As₂ are discussed.     

First-principles study of elastic and thermo-physical properties of kesterite-type Cu2ZnSnS4

The lattice constants and elastic constants of the kesterite-type Cu₂ZnSnS₄ have been calculated using density-functional theory (DFT). The calculated lattice constants are in good agreement with the experimental data. The calculated elastic constants indicate that the bonding strength along the [1 0 0] and [0 1 0] directions is as strong as the one along the [0 0 1] direction. The high B/G ratio shows that the kesterite-type Cu₂ZnSnS₄ compound has ductile behavior. Finally, using the Debye model, the volume, bulk modulus and heat capacity as a function of temperature for the kesterite-type CZTS have been estimated at different pressures. The Debye temperature and Gruneisen parameter are 157 K and 2.28 at 300 K temperature, respectively. The present results can give some information for the design of the kesterite-type CZTS compounds, and these can also be used to stimulate future experimental and theoretical work.     

The effect of different temperature annealing on phase relation of LaFe11.5Si1.5 and the magnetocaloric effects of La0.8Ce0.2Fe11.5−xCoxSi1.5 alloys

The phase relation of LaFe_11.5Si_1.5 alloys annealed at different high-temperature from 1223 K (5 h) to 1673 K (0.5 h) has been studied. The powder X-ray diffraction (XRD) patterns show that large amount of 1:13 phase begins to form in the matrix alloy consisting of α-Fe and LaFeSi phases when the annealing temperature is 1423 K. In the temperature range from 1423  to 1523 K, α-Fe and LaFeSi phases rapidly decrease to form 1:13 phase, and LaFeSi phase is rarely observed in the XRD pattern of LaFe_11.5Si_1.5 alloy annealed at 1523 K. With annealing temperature increasing from 1573  to 1673 K, the LaFeSi phase is detected again in the LaFe_11.5Si_1.5 alloy, and there is La₅Si₃ phase when the annealing temperature reaches 1673 K. There almost is no change in the XRD patterns of LaFe_11.5Si_1.5 alloys annealed at 1523 K for 3-5 h. According to this result, the La_0.8Ce_0.2Fe_11.5−xCo_xSi_1.5 (0≤×≤0.7) alloys are annealed at 1523 K (3 h). The analysis of XRD patterns shows that La_0.8Ce_0.2Fe_11.5xCo_xSi_1.5 alloys consist of the NaZn₁₃-type main phase and α-Fe impurity phase. With the increase of Co content from x=0 to 0.7, the Curie temperature T_C increases from 180 to 266 K. Because the increase of Co content can weaken the itinerant electron metamagnetic transition, the order of the magnetic transition at T_C changes from first to second-order between x=0.3 and 0.5. Although the magnetic entropy change decreases from 34.9 to 6.8 J/kg K with increasing Co concentration at a low magnetic field of 0-2 T, the thermal and magnetic hysteresis loss reduces remarkably, which is very important for the magnetic refrigerant near room temperature.     

Effect of sintering temperature and the particle size on the structural and magnetic properties of nanocrystalline Li0.5Fe2.5O4

Sintering temperature and particle size dependent structural and magnetic properties of lithium ferrite (Li_0.5Fe_2.5O₄) were synthesized and sintered at four different temperatures ranging from 875 to 1475 K in the step of 200 K. The sample sintered at 875 K was also treated for four different sintering times ranging from 4 to 16 h. Samples sintered at 1475 K have the cubic spinel structure with a small amount of α-Fe₂O₃ (hematite) and γ-Fe₂O₃ (maghemite). The samples sintered at≤1275 K do not show hematite and maghemite phases and the crystals form the single phase spinel structure with the cation ordering on octahedral sites. Particle size of lithium ferrite is in the range of 13-45 nm, and is depend on the sintering temperature and sintering time. The saturation magnetization increased from 45 to 76 emu/g and coercivity decreases from 151 to 139 Oe with an increase in particle size. Magnetization temperature curve recorded in ZFC and FC modes in an external magnetic field of 100 Oe. Typical blocking effects are observed below about 244 K. The dielectric constant increases with an increase in sintering temperature and particle size.     

Structural, electronic and thermodynamic properties of cubic Zn3N2 under high pressure from first-principles calculations

The structural, electronic and thermodynamic properties of cubic Zn₃N₂ under hydrostatic pressure up to 80 GPa are investigated using the local density approximation method with pseudopotentials of the ab initio norm-conserving full separable Troullier-Martin scheme in the frame of density functional theory. The structural parameters obtained at ambient pressure are in agreement with experimental data and other theoretical results. The change of bond lengths of two different types of Zn-N bond with pressure suggests that the tetrahedral Zn-N bond is slightly less compressible than the octahedral bond. By fitting the calculated band gap, the first and second order pressure coefficients for the direct band gap ofthe Zn₃N₂ were determined to be 1.18×10⁻² eV/GPa and −2.4×10⁻⁴ eV/(GPa)², respectively. Based on the Mulliken population analysis, Zn₃N₂ was found to have a higher covalent character with increasing pressure. As temperature increases, heat capacity, enthalpy, product of temperature and entropy increase, whereas the Debye temperature and free energy decrease. The present study leads to a better understanding of how Zn₃N₂ materials respond to compression.     

Calculation of temperature fields with a film-substrate interfacial layer model to discuss the layer-pair number effects on the damage thresholds of LaF3/MgF2 high reflectors at 355 nm

Laser induced damage thresholds (LIDT) of LaF₃/MgF₂ high reflectors at 355 nm were measured and investigated as a function of layer-pair number. Generally, LaF₃/MgF₂ coatings with more layer pairs possessed higher LIDT, but coatings with too high layer-pair number crazed because of high tensile stress, so the LIDT of them decreased badly. The temperature rise in the coatings was calculated based on a film-substrate interfacial absorption model, and the depth of the damage in the coatings were measured by a Veeco optical profilograph. The two characterization methods together were used to interpret the effects of layer-pair number on LIDT, and the damage mechanism of coatings at laser wavelength of 355 nm was also discussed.     

Self-, N2- and O2-broadening coefficients for the CO2 transitions near-IR measured by a diode laser photoacoustic spectrometer

Using a high-resolution tunable diode laser photoacoustic spectrometer, self-, N₂ and O₂ pressure broadening coefficients for the first 11 transitions of ¹²C¹⁶O₂ in the R branch of the (30012) ← (00001) overtone band at the 6348 cm⁻¹ have been revisited at room temperature (∼298 K). Air-broadening parameters have also been calculated from the N₂ and O₂ measurements. The dependence of the broadening on rotational quantum number m is discussed. The recorded lineshapes are fitted with standard Voigt line profiles in order to determine the collisional broadening coefficients of carbon dioxide transitions. The results are compared to our previous measurements and to the values reported in the HITRAN04 database and by other research group with a different spectroscopic technique.     

Line shift and mixing in the ν4 and 2ν2 band of NH3 perturbed by H2 and Ar

Pressure induced line shift and line mixing parameters have been measured for 66 rovibrational lines in the ν₄ band and for 10 lines in the 2ν₂ band of NH₃ perturbed by H₂ and Ar at room temperature (T = 296 K). These lines with J values ranging from 2 to 10 are located in the spectral range 1450-1600 cm⁻¹. Experiments were made with a high-resolution Fourier transform spectrometer. The line shifts and line mixing parameters have been derived from the non-linear least-square multi-pressure fitting technique. The shift coefficients are compared with those calculated from the Robert-Bonamy formalism (RB). The results are generally in satisfactory agreement with the experimental data.     

Air-broadening coefficients of the HO2 radical in the 2ν1 band measured using cw-CRDS

In this paper we present measurements of the air-broadening coefficients of HO₂ at room temperature in the 2ν₁ band around 1.5 microns. The HO₂ radicals were created by flash photolysis of SOCl₂ in a flow of O₂/CH₃OH mixtures. To observe air-broadening, N₂ (79%) and O₂ (21%) were added using calibrated flow controllers and a total pressure controller. The total pressure was monitored in parallel using a capacitive pressure gauge. Air-broadening coefficients at 296 K were determined for 34 absorption lines between 6631 and 6671 cm⁻¹. The air-broadening coefficients of HO₂ show a rotational dependence (decreasing from about 0.14 cm⁻¹/atm for N″ = 3 to about 0.09 cm⁻¹/atm for N″ = 10). No evidence for collisional narrowing was observed.     

Annealing effect on CdS/SnO2 films grown by chemical bath deposition

The extensive investigation of the annealing effect in nitrogen atmosphere on the structural optical and electrical properties of chemically deposited CdS films on SnO₂ has been performed. The as-deposited film shows 2.45 eV band gap (E_g) and decreases with increasing annealing temperature. The film annealed at 623 K having pure hexagonal phase (a = 4.14 Å, c = 6.71 Å for [1 0 0] plane) and E_g = 2.36 eV shows 10 times higher conductivity for all temperature range, and shows two different activation energies E_a = 0.114 eV and E_a = 0.033 eV for the temperature range 395 K ≤ T ≤ 515 K and 515 K ≤ T ≤ 585 K, respectively. The structural parameters such as dislocation density, strain and optical parameters such as absorption and extinction coefficient are calculated and compared for all the films.     

Influence of substrate temperature on structures and dielectric properties of pyrochlore Bi1.5Zn1.0Nb1.5O7 thin films prepared by pulsed laser deposition

The influence of substrate temperature on structural and dielectric properties of cubic pyrochlore Bi_1.5Zn_1.0Nb_1.5O₇ (BZN) thin films prepared by pulsed laser deposition process has been investigated. BZN thin films were deposited on Pt/Ti/SiO₂/Si(1 0 0) substrate and in situ annealed at 700 °C. The results indicate that the substrate temperature has a significant effect on the structural and dielectric properties of BZN thin films. The films exhibit a cubic pyrochlore structure in the substrate temperature range from 550 °C to 700 °C and at the annealing temperature of 700 °C. With further increase of substrate temperature to 750 °C, the phases of Bi₂O₃, BiNbO₄ and Bi₅Nb₃O₁₅ can be detected in the XRD pattern due to the Zn loss. The dielectric constant and loss tangent of the films deposited at 650 °C are 192 and 6 × 10⁻⁴ at 10 kHz, respectively. The tunability is 10% at a dc bias field of 0.9 MV/cm.     

Formation of a cubic Sr2MnWO6 phase at elevated temperature; a neutron powder diffraction study

In a temperature dependent neutron powder diffraction (NPD) study we observed the high temperature cubic phase at 973 K in the polycrystalline double perovskite Sr₂MnWO₆. Rietveld analysis of the NPD data shows that the room temperature tetragonal phase exists up to 573 K (space group P4₂/n, a=8.0119 (4) Å, c=8.0141(8) Å). At 773 K, the primitive tetragonal symmetry change to body-centred tetragonal (space group I4/m, a=5.6935(5) Å, c=8.077(1) Å) and finally at 973 K it becomes face-centred cubic (space group Fm-3m, a=8.0864(8) Å). The changes in the structural symmetry are connected to the small distortion of the B-site octahedra, which are insensitive to the Differential Thermal Analysis (DTA) signal.     

Experimental study of H2O spectroscopic parameters in the near-IR (6940-7440 cm) for gas sensing applications at elevated temperature

Tunable diode laser (TDL) absorption sensors of water vapor are attractive for temperature, gas composition, velocity, pressure, and mass flux measurements in a variety of practical applications including hydrocarbon-fueled combustion systems. Optimized design of these sensors requires a complete catalog of the assigned transitions with accurate spectroscopic data; our particular interest has been in the 2ν₁, 2ν₃, and ν₁+ν₃ bands in the near-IR where telecommunications diode lasers are available. In support of this need, fully resolved absorption spectra of H₂O vapor in the spectral range of 6940-7440 cm⁻¹ (1344-1441 nm) have been measured as a function of temperature (296-1000 K) and pressure (1-800 Torr), and quantitative spectroscopic parameters inferred from these spectra compared to published data from Toth, HITRAN 2000 and HITRAN 2004. The peak absorbances were measured for more than 100 strong transitions at 296 and 828 K, and linestrengths determined for 47 strong lines in this region. In addition to reference linestrengths S(296 K), the air-broadening coefficients γ_air(296 K) and temperature exponents n were inferred for strong transitions in five narrow regions, near 7185.60, 7203.89, 7405.11, 7426.14 and 7435.62 cm⁻¹ that had been targeted as attractive for future diagnostics applications. Most of the measured results, determined within an accuracy of 5%, are found to be in better agreement with HITRAN 2004 than with earlier editions of this database. Large discrepancies (>10%) between measurements and HITRAN 2004 database are identified for some of the probed transitions. These new spectroscopic data for H₂O provide a useful test of the sensor design capabilities of HITRAN 2004 for combustion and other applications at elevated temperatures.     

Elastic and thermodynamic properties of CaB6 under pressure from first principles

The elastic and thermodynamic properties of CsCl-type structure CaB₆ under high pressure are investigated by first-principles calculations based on plane-wave pseudopotential density functional theory method within the generalized gradient approximation (GGA). The calculated lattice parameters of CaB₆ under zero pressure and zero temperature are in good agreement with the existing experimental data and other theoretical data. The pressure dependences of the elastic constants, bulk modulus B (GPa), and its pressure derivative B′, shear modulus G, Young's modulus E, elastic Debye temperature Θ_B, Zener's anisotropy parameter A, Poisson ratios σ, and Kleinmann parameter ζ are also presented. An analysis for the calculated elastic constants has been made to reveal the mechanical stability of CaB₆ up to 100 GPa. The thermodynamic properties of the CsCl-type structure CaB₆ are predicted using the quasi-harmonic Debye model. The pressure-volume-temperature (P-V-T) relationship, the variations of the heat capacity C_V, Debye temperature Θ_D, and the thermal expansion α with pressure P and temperature T, as well as the Grüneisen parameters γ are obtained systematically in the ranges of 0-100 GPa and 0-2000 K.     

Synthesis,magnetic and electrical transport properties of magnetoresistance material Sr2FeMoO6 by microwave sintering

Magnetoresistance material Sr₂FeMoO₆ with double perovskite structure was synthesized by microwave sintering method using SrCO₃, Fe₂O₃ and MoO₃ as raw materials, with MnO₂ for microwave absorber. The phase structure, magnetic and electrical transport properties were investigated by X-ray powder diffraction (XRD) and vibrating-sample magnetometer. XRD analysis shows that the as-synthesized sample is Sr₂FeMoO₆ with tetragonal crystal structure and I4/mmm space group. The unit cell parameters are a=0.5587 nm, c=0.7894 nm, volume=0.2464 nm³. The calculated grain size of the sample is 31.62 nm, which is obtained by the Scherrer formula using the diffraction data. Magnetism testing results show that the sample Sr₂FeMoO₆ is ferromagnetic with the magnetic transition temperature of about 380 K. Under 1.0 T magnetic field, the saturation and spontaneous magnetization of Sr₂FeMoO₆ is 1.25 μ_B/f.u. and 1.00 μ_B/f.u. at room temperature. The magnetoresistance ratio of the sample is 28%. Electrical transport properties testing results indicate that the sample exhibits typical semiconductor behavior. The conductive mechanism of Sr₂FeMoO₆ is highly dependent on temperature: within the temperature range of 100–300 K, the mechanism is attributed to the small polaron variable-range hopping model; while it is ascribed to the adiabatic small polaron model within the temperature range of 80–100 K.     

Effects of oxygen partial pressure and substrate temperature on the structure and optical properties of MgxZn1−xO thin films prepared by magnetron sputtering

Deposited with different oxygen partial pressures and substrate temperatures, Mg_xZn_1−xO thin films were prepared using a Mg_0.6Zn_0.4O ceramic target by magnetron sputtering. The structural and optical properties of the prepared thin films were investigated. The X-ray diffraction spectra reveal that all the films on quartz substrate are grown along (2 0 0) orientation with cubic structure. The lattice constant decreases and the crystallite size increases with the increase of substrate temperature. Both energy dispersive X-ray spectroscopy and calculated results suggest the ratio of Mg/Zn increases with increasing substrate temperature. The thin film deposited with T_s = 500 °C has a minimal rms roughness of 7.37 nm. The transmittance of all the films is higher than 85% in the visual region. The optical band gap is not sensitive to the oxygen partial pressure, while it increases from 5.63 eV for T_s = 100 °C to 5.95 eV for T_s = 700 °C. In addition, the refractive indices calculated from transmission spectra are sensitive to the substrate temperature. The photoluminescence spectra of Mg_xZn_1−xO thin films excited by 330 nm ultraviolet light indicate that the peak intensity of the spectra is influenced by the oxygen partial pressure and substrate temperature.     

Theoretical study on the kinetics for OH reactions with CH3OH and C2H5OH

Kinetics and mechanisms for reactions of OH with methanol and ethanol have been investigated at the CCSD(T)/6-311 + G(3df, 2p)//MP2/6-311 + G(3df, 2p) level of theory. The total and individual rate constants, and product branching ratios for the reactions have been computed in the temperature range 200-3000 K with variational transition state theory by including the effects of multiple reflections above the wells of their pre-reaction complexes, quantum-mechanical tunneling and hindered internal rotations. The predicted results can be represented by the expressions k₁ = 4.65 × 10⁻²⁰ × T^2.68 exp(414/T) and k₂ = 9.11 × 10⁻²⁰ × T^2.58 exp(748/T) cm³ molecule⁻¹ s⁻¹ for the CH₃OH and C₂H₅OH reactions, respectively. These results are in reasonable agreements with available experimental data except that of OH + C₂H₅OH in the high temperature range. The former reaction produces 96-89% of the H₂O + CH₂OH products, whereas the latter process produces 98-70% of H₂O + CH₃CHOH and 2-21% of the H₂O + CH₂CH₂OH products in the temperature range computed (200-3000 K).