Equation of state for technetium from X‐ray diffraction and first-principle calculations

The ambient temperature equation of state (EoS) of technetium metal has been measured by X-ray diffraction. The metal was compressed using a diamond anvil cell and using a 4:1 methanol-ethanol pressure transmitting medium. The maximum pressure achieved, as determined from the gold pressureEquation of state for technetium from X-ray diffraction and first-principle calculations scale, was 67 GPa. The compression data shows that the HCP phase of technetium is stable up to 67 GPa. The compression curve of technetium was also calculated using first-principles total-energy calculations. Utilizing a number of fitting strategies to compare the experimental and theoretical data it is determined that the Vinet equation of state with an ambient isothermal bulk modulus of B_0T=288 GPa and a first pressure derivative of B′=5.9(2) best represent the compression behavior of technetium metal.     

Single-crystal elastic constants of magnesium difluoride (MgF2) to 7.4 GPa

The six independent elastic constants (C₁₁, C₁₂, C₁₃, C₃₃, C₄₄, and C₆₆) of single-crystal MgF₂ in the rutile structure have been measured by Brillouin spectroscopy at room temperature from ambient conditions to 7.4 GPa. Measurements were performed on two monocrystals with perpendicular faces, (001) and (100). A quasi-linear fit from finite strain theory was applied to the experimental data revealing the pressure dependence of the six elastic constants of MgF₂. The shear modulus C_S=1/2(C₁₁−C₁₂), and the aggregate shear (Voigt–Reuss–Hill) modulus G show a softening with increasing pressure, indicating the approach of the rutile-to-CaCl₂-type structural phase transition at P~9 GPa. The adiabatic bulk modulus (Reuss average) and its pressure derivative have been determined: K_0S=105.1±0.3 GPa, (∂K_0S/∂P)_T=4.14±0.05. The pressure–volume equation of state of MgF₂ was computed self-consistently from the Brillouin data. Our results are in good agreement with X-ray diffraction data. As the phase transition is approached, MgF₂ becomes strongly anisotropic and develops partially auxetic behavior (a negative Poisson's ratio in certain directions).     

Molecular dynamic study of the melting temperature in MgF2 with the fluorite structure

The melting temperature of MgF₂ with cubic fluorite structure has been calculated by the constant temperature and pressure molecular dynamics (MD) simulation using the well-tested effective pair-wise potentials, which consist of the Coulomb, dispersion, and repulsion interaction by varying temperature from 300 to 2500 K. It is found that the potential parameters for MgF₂ derived from ab initio periodic Hartree-Fock calculations are very successful in reproducing accurately the DFT-GGA combined with quasi-harmonic Debye model calculated volumes of the cubic fluorite-type MgF₂ over a wide range of temperature at room pressure. Our simulated melting temperature of cubic fluorite-type MgF₂ is very close to the actual melting temperature 1539 K. Meanwhile, the radial distribution functions of Mg-Mg, F-F, and Mg-F ion pairs near the melting temperature are investigated from the isobaric and isothermal ensemble.     

Structural and thermodynamic properties of OsN2 from first-principles calculations

We investigate the structural and thermodynamic properties of OsN2 by a plane-wave pseudopotential density functional theory method. The obtained lattice constant,bulk modulus and cell volume per unit formula are consistent with the available theoretical data. Moreover,the pressure-induced phase transition of OsN2 from pyrite structure to fluorite structure has been obtained. It is found that the transition pressure of OsN2 at zero temperature is 67.2 GPa. The bulk modulus B as well as other thermodynamic quantities of fluorite OsN2 (including the Gru¨neisen constant γ and thermal expansion α) on temperatures and pressures have also been obtained.     

Simulated equation of state of CaF2 with fluorite-type structure at high temperature and high pressure

The pressure-volume-temperature (P-V-T) equation of state (EOS), isothermal bulk modulus, and thermal expansivity of CaF₂ with cubic fluorite-type structure are investigated using the constant temperature and pressure shell model molecular dynamics (MD) method with effective pair potentials which consist of the Coulomb, dispersion, and repulsion interaction. It was shown that MD simulation is very successful in accurately reproducing the measured volumes of the CaF₂ over a wide range of pressures. The simulated P-V data matched X-ray diffraction experimental results up to 9.5 GPa at 300 K. In addition, volume thermal-expansion coefficient and isothermal bulk modulus were also calculated and compared with available experimental data and the latest theoretical results at ambient condition. At extended temperature and pressure ranges, The P-V EOS under different isotherms at selected temperatures, T-V EOS under different isobars at selected pressures, thermal expansivity, and isothermal bulk modulus were predicted up to 1500 K and 10 GPa. The detailed knowledge of thermodynamic behavior and EOS at extreme conditions are of fundamental importance to the understanding of the physical properties of CaF₂.     

Analysis of thermoelastic behaviour of MgO at high temperatures and high pressures

The thermoelastic behaviour of MgO has been studied for the temperature range (300-3000 K) under different compressions down to V/V₀=0.3. It has been shown that a comprehensive study of the thermoelastic properties of MgO can be made with the help of the Anderson-Isaak equation for thermal expansivity and the Vinet equation of state taken together. We have estimated the values of thermal expansivity α, isothermal bulk modulus K_T, their variations with pressure and temperature, the Anderson-Gruneisen parameter and the change in entropy with compression for MgO along isotherms at different temperatures. The results have been discussed and compared with the corresponding values reported in the recent literature.     

Full potential calculation of structural, elastic properties and high-pressure phase of binary noble metal carbide: ruthenium carbide

We present in this paper the results of an ab initio theoretical study within the local density approximation (LDA) to determine in rock-salt (B1), cesium chloride (B2), zinc-blende (B3), and tungsten carbide (WC) type structures, the structural, elastic constants, hardness properties and high-pressure phase of the noble metal carbide of ruthenium carbide (RuC).The ground state properties such as the equilibrium lattice constant, elastic constant, the bulk modulus, its pressure derivative, and the hardness in the four phases are determined and compared with available theoretical data. Only for the three phases B1, B3, and WC, is the RuC mechanically stable, while in the B2 phase it is unstable, but in B3 RuC is the most energetically favourable phase with the bulk modulus 263 GPa, and at sufficiently high pressure (P_t=19.2 GPa) the tungsten carbide (WC) structure would be favoured, where ReC-WC is meta-stable.The highest bulk modulus values in the B3, B2, and WC structures and the hardnesses of H(B3)=36.94 GPa, H(B1)=25.21 GPa, and H(WC)=25.30 GPa indicate that the RuC compound is a superhard material in B3, and is not superhard in B1 and WC structures compared with the H(diamond)=96 GPa.     

First-principles calculations of structural and thermodynamic properties of Y 3Al5O12

The pseudo-potential plane-wave method using the generalized gradient approximation (GGA) within the framework of the density functional theory is applied to study the structural and thermodynamic properties of Y ₃Al₅O₁₂. The lattice constants and bulk modulus are calculated. They keep in good agreement with other theoretical data and experimental results. The quasi-harmonic Debye model, in which the phononic effects are considered, is applied to the study of the thermodynamic properties. The temperature effect on the structural parameters, bulk modulus, thermal expansion coefficient, specific heats and Debye temperatures in the whole range from 0 to 20 GPa and temperature range from 0 to 1500 K.     

Thermal equation-of-state of osmium: a synchrotron X-ray diffraction study

The pressure-volume-temperature behavior of osmium was studied at pressures and temperatures up to 15 GPa and 1273 K. In situ measurements were conducted using energy-dispersive synchrotron X-ray diffraction in a T-cup 6-8 high pressure apparatus. A fit of room-temperature data by the third-order Birch-Murnaghan equation-of-state yielded isothermal bulk modulus K₀=435(19) GPa and its pressure derivative K′₀=3.5(0.8) GPa. High-temperature data were analyzed using Birch-Murnaghan equation of state and thermal pressure approach. The temperature derivative of bulk modulus was found to be −0.061(9) GPa K⁻¹. Significant anisotropy of osmium compressibility was observed.     

Effects of pressure and temperature on the isothermal bulk modulus of CaO

Molecular dynamics (MD) simulations have been performed to investigate the effects of pressure and temperature on the isothermal bulk modulus of CaO using pair-wise interactions that include polarization effects through the shell model (SM). The dependence of isothermal bulk modulus B_T of CaO on the compression ratio V/V₀ and pressure P have been obtained from MD runs at T=300 K, and compared with the available experimental data and other theoretical results. A good agreement between theory and experiment is obtained. Meanwhile, B_T dependence on temperature T at zero pressure is investigated. At extended pressure and temperature ranges, SM-MD method has also been carried out for predicting the P-V-T equation of state and isothermal bulk modulus at different temperatures along the isotherms 0, 1000, 2000, 3000, and 4000 K, and at different pressures along the isobars 5, 15, 30, 40, and 50 GPa for CaO, respectively.     

Mechanical properties of bulk and nanoscale TiO2 phases

The mechanical properties of bulk and nanoscale TiO₂ phases are examined with a view to assess the available bulk modulus and hardness data, and to understand the size-dependent behaviors. The bulk modulus values of thermodynamically stable bulk TiO₂ phases show a general correlation with Ti-O coordination number. As with the cotunnite-structured (OII) phase, it is likely that the seven-coordinated OI and eight-coordinated fluorite forms of TiO₂ are ultrahard substances. Of the nanoscale phases investigated thus far, nanocrystalline anatase displays the strongest size dependence of bulk modulus values, with possible stiffening behavior effected by incipient grain boundary amorphization under pressure. Nanocrystalline rutile and baddeleyite phases do not show appreciable size dependence in their compression behaviors.     

Melting and isothermal bulk modulus of the rocksalt phase of ZnO with molecular dynamics simulation

The Buckingham potential has been employed to simulate the melting of the rocksalt phase of ZnO over a wide pressure–temperature range and isothermal bulk modulus with shell model molecular dynamics method. The melting curve from molecular dynamics simulations is in good agreement with the results obtained from Lindemann melting equation in the pressure below 7 GPa. The calculated null compression bulk modulus is compared with the available experimental data and other theoretical results. At extended temperature ranges, the isothermal bulk modulus has also been predicted up to 3000 K.     

Ab initio investigation into the structural, electronic and elastic properties of AlCu2TM (TM = Ti, Zr and Hf) ternary compounds

The Al-Cu-TM (TM = transition metal) alloy system has attracted great attention for both excellent glass-forming ability and its interesting physical properties. In this work, an investigation into the crystal, electrical and elastic properties of the AlCu₂TM (TM = Ti, Zr, and Hf) compounds has been conducted by first-principles calculations based on density-functional theory. The fully relaxed structure parameters of the AlCu₂TM compounds are in good agreement with previous experimental and other theoretical results. Besides, the cohesive energies of all the AlCu₂TM compounds have been evaluated. The energy band and densities of state of these compounds are also obtained. According to the calculated single crystal elastic constants, all the compounds are mechanically stable. The polycrystalline bulk moduli, shear moduli, Young’s moduli and Poisson’s ratio have been deduced by using Voigt-Reuss-Hill (VRH) approximations. The calculated negative Cauchy pressure and ratio of bulk modulus to shear modulus indicated that the AlCu₂TM compounds are ductile materials. The Debye temperatures of the AlCu₂TM compounds decrease with increasing the TM (Ti, Zr, and Hf) atomic number.     

First principles study on the structural, electronic, and elastic properties of Na-As systems

We have performed the first principles calculation by using the plane-wave pseudopotential approach with the generalized gradient approximation for investigating the structural, electronic, and elastic properties Na-As systems (NaAs in NaP, LiAs and AuCu-type structures, NaAs₂ in MgCu₂-type structure, Na₃As in Na₃As, Cu₃P and Li₃Bi-type structures, and Na₅As₄ in A₅B₄-type structure). The lattice parameters, cohesive energy, formation energy, bulk modulus, and the first derivative of bulk modulus (to fit to Murnaghan’s equation of state) of the related structures are calculated. The second-order elastic constants and the other related quantities such as Young’s modulus, shear modulus, Poisson’s ratio, sound velocities, and Debye temperature are also estimated.     

First-principles calculations of structural stability and mechanical properties of tungsten carbide under high pressure

The structural stability and mechanical properties of WC in WC-, MoC- and NaCl-type structures under high pressure are investigated systematically by first-principles calculations. The calculated equilibrium lattice constants at zero pressure agree well with available experimental and theoretical results. The formation enthalpy indicates that the most stable WC is in WC-type, then MoC-type finally NaCl-type. By the elastic stability criteria, it is predicted that the three structures are all mechanically stable. The elastic constants C_ij, bulk modulus B, shear modulus G, Young?s modulus E and Poisson?s ratio ν of the three structures are studied in the pressure range from 0 to 100 GPa. Furthermore, by analyzing the B/G ratio, the brittle/ductile behavior under high pressure is assessed. Moreover, the elastic anisotropy of the three structures up to 100 GPa is also discussed in detail.     

High pressure X-ray diffraction study on icosahedral boron arsenide (B12As2)

The high pressure properties of icosahedral boron arsenide (B₁₂As₂) were studied by in situ X-ray diffraction measurements at pressures up to 25.5 GPa at room temperature. B₁₂As₂ retains its rhombohedral structure; no phase transition was observed in the pressure range. The bulk modulus was determined to be 216 GPa with the pressure derivative 2.2. Anisotropy was observed in the compressibility of B₁₂As₂—c-axis was 16.2% more compressible than a-axis. The boron icosahedron plays a dominant role in the compressibility of boron-rich compounds.     

Molecular dynamics simulation of P-V-T relationship of ZnO with rock-salt structure using pair-wise interactions

Molecular dynamics (MD) method is used to investigate the behavior of the pressure-volume-temperature (P-V-T) relationship, lattice constant and thermal expansivity for ZnO with rock-salt structure at high pressures and temperatures. The interionic potential is taken to be the sum of pair-wise additive Coulomb, van der Waals attraction, and repulsive interactions. The isothermal and isobaric properties are discussed from the corresponding P-V-T relationship, and it is shown that the MD simulation is successful in reproducing the measured volumes of ZnO over a wide range of temperature and pressure. Meanwhile, the equations of state parameters including lattice constant, linear thermal expansion coefficient, and isothermal bulk modulus are calculated and compared with the available experimental data and the latest theoretical results. At an extended pressure and temperature range, P-V-T relationship, lattice constant, and linear thermal expansion coefficient have been predicted. The structural and thermodynamic properties of ZnO with rock-salt structure are summarized in the pressure 0-100 GPa ranges and the temperature up to 3100 K.     

Structural studies of AgSbTe2 under pressure: Experimental and theoretical analyses

The crystal structure of AgSbTe₂ has been refined using first-principles calculations, from which the ordering of the cations, Ag and Sb, was confirmed. The spontaneous formation of two (D4 and L1₁) phases at ambient and elevated pressure was demonstrated theoretically. The compound was also prepared and its high-pressure structural deformation sequence, ranging from ambient to 50.9 GPa, was observed with synchrotron radiation at room temperature. The compound underwent a pressure-induced amorphization (PIA) at 24.6 GPa and then started recrystallizing at 49.2 GPa. The bulk modulus (B₀) and pressure derivative of the bulk modulus (B_p) were determined experimentally to be 56.3 ± 5.1 GPa and 4.3 ± 0.8, respectively. We suggest that large displacements of Te atoms to Ag vacancy positions are responsible for PIA and the recrystallization.     

First-principles calculations of structural, elastic, electronic and optical properties of the antiperovskite AsNMg3

The density functional theory (DFT) calculations of structural, elastic, electronic and optical properties of the cubic antiperovskite AsNMg₃ has been reported using the pseudo-potential plane wave method (PP-PW) within the generalized gradient approximation (GGA). The equilibrium lattice, bulk modulus and its pressure derivative have been determined. The elastic constants and their pressure dependence are calculated using the static finite strain technique. We derived the bulk and shear moduli, Young's modulus and Poisson's ratio for ideal polycrystalline AsNMg₃ aggregate. We estimated the Debye temperature of AsNMg₃ from the average sound velocity. This is the first quantitative theoretical prediction of the elastic properties of AsNMg₃ compound, and it still awaits experimental confirmation. Band structure, density of states and pressure coefficients of energy gaps are also given. The fundamental band gap (Γ-Γ) initially increases up to 4 GPa and then decreases as a function of pressure. Furthermore, the dielectric function, optical reflectivity, refractive index, extinction coefficient, and electron energy loss are calculated for radiation up to 30 eV. The all results are compared with the available theoretical and experimental data.     

Theoretical study of the structural, elastic, electronic and thermal properties of the MAX phase Nb2SiC

Structural, elastic, electronic and thermal properties of the MAX phase Nb₂SiC are studied by means of a pseudo-potential plane-wave method based on the density functional theory. The optimized zero pressure geometrical parameters are in good agreement with the available theoretical data. The effect of high pressure, up to 40 GPa, on the lattice constants shows that the contractions along the c-axis were higher than those along the a-axis. The elastic constants C_ij and elastic wave velocities are calculated for monocrystal Nb₂SiC. Numerical estimations of the bulk modulus, shear modulus, Young’s modulus, Poisson’s ratio, average sound velocity and Debye temperature for ideal polycrystalline Nb₂SiC aggregates are performed in the framework of the Voigt-Reuss-Hill approximation. The band structure shows that Nb₂SiC is an electrical conductor. The analysis of the atomic site projected densities and the charge density distribution shows that the bonding is of covalent-ionic nature with the presence of metallic character. The density of states at Fermi level is dictated by the niobium d states; Si element has a little effect. Thermal effects on some macroscopic properties of Nb₂SiC are predicted using the quasi-harmonic Debye model, in which the lattice vibrations are taken into account. The variations of the primitive cell volume, volume expansion coefficient, bulk modulus, heat capacity and Debye temperature with pressure and temperature in the ranges of 0-40 GPa and 0-2000 K are obtained successfully.