As-NMR/NQR study of pressure-induced superconductivity in CaFe2As2

⁷⁵As-zero-field nuclear magnetic resonance (NMR) and nuclear quadrupole resonance (NQR) measurements are performed on CaFe₂As₂ under pressure. At P=4.7 and 10.8 kbar, the temperature dependence of nuclear-spin-lattice relaxation rate (1/T₁) measured at tetragonal phase show no coherence peak just below T_c and decrease with decreasing temperature. The superconductivity is of gapless at P=4.7 kbar but evolves to multiple gaps at P=10.8 kbar. We find that the superconductivity appears near a quantum critical point. Both electron correlation and superconductivity disappear in the collapsed tetragonal phase. A systematic study under pressure indicates that electron correlations play a vital role in forming Cooper pairs in this compound.     

Iron isotope effect on Tc in optimally-doped (Ba,K)Fe2As2 (Tc = 38 K) and SmFeAsO1−y (Tc = 54 K) superconductors

We report the iron isotope effect on a transition temperature (T_c) in an optimally-doped (Ba,K)Fe₂As₂ (T_c = 38 K) and SmFeAsO_1−y (T_c = 54 K) superconductors. In order to obtain the reliable isotope shift in T_c, twin samples with different iron isotope mass are synthesized in the same conditions (simultaneously) under high-pressure. We have found that (Ba,K)Fe₂As₂ shows an inverse iron isotope effect α_Fe = −0.18 ± 0.03 while SmFeAsO_1−y shows a small iron isotope effect α_Fe = −0.02 ± 0.01, where the isotope exponent α is defined by T_c ∼ M^−α (M is the isotopic mass). The results show that α_Fe changes in the iron-based superconductors depending on the system. The distinct iron isotope effects imply the exotic coupling mechanism in the iron-based superconductors.     

Luminescent properties of KGd1−x(WO4)2:Eux and KGd1−x(WO4)2−y(MoO4)y:Eux phosphors in UV-VUV regions

KGd_1−x(WO₄)_2−y(MoO₄)_y:Eu³⁺_x(0.1?x?0.75, y=0 and 0.2) phosphors are synthesized through traditional solid-state reaction and their luminescent properties in ultraviolet (UV) and vacuum ultraviolet (VUV) regions are investigated. Under 147 nm excitation, these phosphors show characteristic red emission with good color purity. In order to improve their emission intensity, the MoO₄²⁻ (20 wt%) is introduced into the anion of KGd_1−x(WO₄):Eu³⁺_x. The Mo⁶⁺ and Eu³⁺ co-doped KGd(WO₄)₂ phosphors show higher emission intensity in comparison with the singly Eu³⁺-doped KGd(WO₄)₂ in VUV region. The chromaticity coordination of KGd_0.45(WO₄):Eu³⁺_0.55 is (x=0.669, y=0.331), while that of KGd_0.45(WO₄)_1.8(MoO₄)_0.2:Eu³⁺_0.55 is (x=0.666, y=0.334) in VUV region.     

Electronic band structure and Fermi surface of new low-temperature Ni-based superconductors: 3.3 K (Ni2P2)(Sr4Sc2O6) and 2.7 K (Ni2As2)(Sr4Sc2O6) from first principles

Based on first-principle FLAPW-GGA calculations, we have investigated structural and electronic properties of the recently synthesized tetragonal (space group P4/nmm) nickel-based pnictide oxide superconductors: 3.3 K (Ni₂P₂)(Sr₄Sc₂O₆) and 2.7 K (Ni₂As₂)(Sr₄Sc₂O₆). Optimized structural data, electronic bands, total and partial densities of states, and Fermi surface topology have been obtained and discussed in comparison with available experiments and with their Fe-based (Fe₂P₂)(Sr₄Sc₂O₆) and (Fe₂As₂)(Sr₄Sc₂O₆) analogs.     

Luminescence investigation of red phosphors Ca0.54Sr0.34−1.5xEu0.08Smx(MoO4)y (WO4)1−y for UV-white LED device

Ca_0.54Sr_0.34−1.5xEu_0.08Sm_x(MoO₄)_y (WO₄)_1−y red phosphors were prepared by solid-state reaction using Na⁺ as a charge compensator for light-emitting diodes (LED). The effects of Na⁺ concentration, synthesis temperature, reaction time and Eu³⁺ concentration were studied for the properties of luminescence and crystal structure of red phosphors. The results show that the optimum reaction condition is 6%, 900 °C, 2 h and 8%. The photoluminescence spectra show that red phosphors are effectively excited at 616 nm by 292, 395 and 465 nm. The wavelengths of 465 nm nicely match the widely applied emission wavelengths of blue LED chips.     

Superconductivity of powder-in-tube Sr0.6K0.4Fe2As2 wires

Nb-sheathed Sr_0.6K_0.4Fe₂As₂ superconducting wires have been fabricated using the powder-in-tube (PIT) method for the first time and the superconducting properties of the wires have been investigated. The transition temperature (T_c) of the Sr_0.6K_0.4Fe₂As₂ wires is confirmed to be as high as 35.3 K. Most importantly, Sr_0.6K_0.4Fe₂As₂ wires exhibit a very weak J_c-field dependence behavior even the temperature is very close to T_c. The upper critical field H_c2(0) value can exceed 140 T, surpassing those of MgB₂ and all the low temperature superconductors. Such high H_c2 and superior J_c-field performance make the 122 phase SrKFeAs wire conductors a powerful competitor potentially useful in very high field applications.     

On the existence of a homologous series of BamCum+nOy oxides with the cubic structure of the BaCuO2 oxide

Phase relations have been studied in the BaO–CuO_x system in the range of 42.0–83.0 mol.% CuO at P(O₂) = 21 kPa (air) by visual polythermal analysis (VPA), powder X-ray diffraction (XRD), differential thermal analysis (DTA), thermogravimetric analysis (TGA), chemical analysis (CA), and electron diffraction (ED) with simultaneous elemental analysis (EA) in a transmission electron microscope (TEM). The existence of discrete crystallization fields of barium–copper oxides of cation compositions Ba₄Cu₅O_y, Ba₅Cu₆O_y, Ba₇Cu₈O_y, Ba₁₂Cu₁₃O_y, and Ba₂₄Cu₂₅O_y, which have the cubic structure of the BaCuO₂ oxide, is revealed in the studied region of the system. The oxides may be represented as members of a Ba_mCu_m+nO_y homologous series. The BaCuO₂ oxide does not exist in the subsolidus region and does not have its own crystallization field. The oxygen-deficient oxide BaCuO_1.78 of the cation composition (Ba:Cu) 1:1 with the BaCuO₂ cubic structure is found in melted samples of the 50.0 mol.% CuO composition quenched at 1020–1060 °С.     

Structural and physical properties of undoped and nickel-doped BaFe2-xNixAs2（x = 0,0.04） single crystals

<正>Single crystals of undoped and nickel-doped BaFe_(2-x)Ni_xAs_2(x=0,0.04) have been grown by FeAs self-flux method.The maximum dimension of the crystal is as large as ~ 1 cm along the ab plane.The crystalline topography of a cleaved crystal surface is examined by scanning electron microscope(SEM).By x-ray powder diffraction(XRD) experiments using pure silicon as an internal standard,precise unit cell parameters(tetragonal at room temperature) are determined:a = 3.9606(4) A(1 A=0.1 nm),c = 13.015(2) A for BaFe_(1.96)Ni_(0.04)As_2 and a = 3.9590(5) A,c = 13.024(1) A for BaFe_2As_2.DC magnetization and transport measurements are performed to check superconducting transition(T_c=15 K for x=0.04) and other subtle anomalies.For BaFe_(0.96)Ni_(0.04)As_2 crystal,the resistance curve at normal state shows two distinct anomalies associated with spin and structure transitions,and its magnetization data above ~ 91 K exhibit a linear temperature dependence due to spin density wave(SDW) instability.     

Preparation and magnetic properties of BaFe12O19/Ni0.8Zn0.2Fe2O4 nanocomposite ferrite

Nanocomposite of hard (BaFe₁₂O₁₉)/soft ferrite (Ni_0.8Zn_0.2Fe₂O₄) have been prepared by the sol–gel process. The nanocomposite ferrite are formed when the calcining temperature is above 800 °C. It is found that the magnetic properties strongly depend on the presintering treatment and calcining temperature. The “bee waist” type hysteresis loops for samples disappear when the presintering temperature is 400 °C and the calcination temperature reaches 1100 °C owing to the exchange-coupling interaction. The remanence of BaFe₁₂O₁₉/Ni_0.8Zn_0.2Fe₂O₄ nanocomposite ferrite with the mass ratio of 5:1 is higher than a single phase ferrite. The specific saturation magnetization, remanence magnetization and coercivity are 63 emu/g, 36 emu/g and 2750 G, respectively. The exchange-coupling interaction in the BaFe₁₂O₁₉/Ni_0.8Zn_0.2Fe₂O₄ nanocomposite ferrite is discussed.     

Preparation and magnetic properties of the conductive Co(1−x)NixFe2O4/polyaniline microsphere composites

Core-shell Co_(1−x)Ni_xFe₂O₄/polyaniline nanoparticles, where the core was Co_(1−x)Ni_xFe₂O₄ and the shell was polyaniline, were prepared by the combination of sol-gel process and in-situ polymerization methods. Nanoparticles were investigated by Fourier transform spectrometer, X-ray diffraction diffractometer, Scanning electron microscope, Differential thermal analysis and Superconductor quantum interference device. The results showed that the saturation magnetization of pure Co_(1−x)Ni_xFe₂O₄ nanoparticles were 57.57 emu/g, but Co_(1−x)Ni_xFe₂O₄/polyaniline composites were 37.36 emu/g. It was attributed to the lower content (15 wt%), smaller size and their uneven distribution of Co_(1−x)Ni_xFe₂O₄ nanoparticles in the final microsphere composites. Both Co_(1−x)Ni_xFe₂O₄ and PANI/Co_(1−x)Ni_xFe₂O₄ showed superparamagnetism.     

Influence of boron on the giant magnetocaloric effect of La(Fe0.9Si0.1)13

The influences of boron addition on the phase formation, Curie temperature and magnetic entropy change of the NaZn₁₃-type La(Fe_0.9Si_0.1)₁₃ compound have been investigated. Eight boron containing La(Fe_0.9Si_0.1)₁₃B_x samples were prepared with x=0, 0.03, 0.06, 0.1, 0.2, 0.3, 0.5 and 0.6, respectively. Experimental results show that a small amount of B addition in La(Fe_0.9Si_0.1)₁₃ forms the solid solution NaZn₁₃-type structure phase by substituting B for Si or doping B into interstitial position of the lattice, preserves its giant magnetocaloric effects due to their first-order structural/magnetic transition, as well as increase its Curie temperature T_c slightly. The maximum magnetic entropy changes in the magnetic field change of 0–1.6 T are around 20 J kg^–1 K^–1 for the samples with Boron addition less than 0.3, while improving the Curie temperatures by 2 K.     

Magnetic and magneto-transport properties of double perovskite Ba2−xSrxFeMoO6 system

The structural magnetic and magneto-transport properties of double perovskite system Ba_2−xSr_xFeMoO₆ (0?x?1.0) prepared in bulk polycrystalline form are reported in this paper. X-ray diffraction analysis showed that samples are single phase and the lattice constants decreases with increase in the Sr content. The degree of Fe-Mo ordering has been found decreasing in the series with an increase in the Sr content. Parent compound Ba₂FeMoO₆ exhibits saturation magnetic moment value of 3.54 μ_B/f.u. at 85 K in a magnetic field of 6000 Oe. Temperature dependence of resistivity shows metallic behavior for all the samples. The magneto-resistance (MR) of the compound with x=0.4 is higher than that of the other samples. At room temperature this system shows a saturation magnetization value of 1.73 μ_B/f.u. and MR value of 7.08% (1 T). The observed variations in the structural and magnetic properties are attributed to the change of chemical pressure due to the substitution of Sr in place of Ba. The effect of antisite disorder (ASD) defects on magneto-transport properties is studied in more detail.     

Upper critical magnetic field in Ba0.68K0.32Fe2As2 and Ba(Fe0.93Co0.07)2As2

We report measurements of the temperature dependence of the radio frequency magnetic penetration depth in Ba_0.68K_0.32Fe₂As₂ and Ba(Fe_0.93Co_0.07)₂As₂ single crystals in pulsed magnetic fields up to 60 T. From our data, we construct an H-T-phase diagram for the inter-plane (H ‖ c) and in-plane (H ‖ ab) directions for both compounds. For both field orientations in Ba_0.68K_0.32Fe₂As₂ we find a concave curvature of the H _c2(T) lines with decreasing anisotropy and saturation towards lower temperature. Taking into account Pauli spin paramagnetism we can describe H _c2(T) and its anisotropy. In contrast, we find that Pauli paramagnetic pair breaking is not essential for Ba(Fe_0.93Co_0.07)₂As₂. For this electron-doped compound, the data support a H _c2(T) dependence that can be described by the Werthamer-Helfand-Hohenberg model for H ‖ ab and a two-gap behavior for H ‖ c.     

High-resolution FTIR measurement of the ν4 band of methylene fluoride-d2

A high-resolution (0.002 cm⁻¹) infrared absorption spectrum of methylene fluoride-d₂ (CD₂F₂) of the lowest fundamental mode ν₄ in the region from 460 to 610 cm⁻¹ has been measured on a Bruker IFS 120-HR Fourier transform infrared spectrometer. More than 3500 transitions have been assigned in this B-type band centered at 521.9 cm⁻¹. The data have been combined with upper state pure rotational measurements in a weighted least-squares fit to obtain molecular constants for the upper state resulting in an overall standard deviation of 0.00018 cm⁻¹. Accurate value for the band origin (521.9578036 cm⁻¹) has been obtained and inclusion of transitions with very high J (?60) and K_a (?34) values has resulted in improved precision for sextic centrifugal distortion constants, in particular D_K, H_KJ, and H_K.     

Effect of Sr concentration on microstructure and magnetic properties of (Ba1−xSrx)(Ti0.3Fe0.7)O3 ceramics

Fe-doped (Ba_1−xSr_x)TiO₃ ceramics were prepared by solid-state reaction, and ferromagnetism was realized at room temperature. The microstructure and magnetism were modified by the Sr concentration control (0≤x≤75 at%) at a fixed Fe concentration, and the relevant magnetic exchange mechanism was discussed. All the samples are shown to have a single perovskite structure. When increasing the Sr concentration, the phase structure is transformed from a hexagonal perovskite into a cubic perovskite, with a monotonic decrease in lattice parameters induced by ionic size effect. The room-temperature ferromagnetism is expected to originate from the super-exchange interactions between Fe³⁺ on pentahedral and octahedral Ti sites mediated by the O²⁻ ions. The increase in Sr addition modifies two main influencing factors in magnetic properties: the ratio of pentahedral to octahedral Fe³⁺ and the concentration of oxygen vacancies, leading to a gradually enhanced saturation magnetization. The highest value, obtained for Fe-doped (Ba_0.25Sr_0.75)TiO₃, is an order of magnitude higher than that of the Fe-doped BaTiO₃ system with similar Fe concentration and preparation conditions, which may indicate (Ba_1−xSr_x)TiO₃ as a more suitable matrix material for multiferroic research.     

Effects of uniaxial pressure and annealing on the resistivity of Ba(Fe1−xCox)2As2

Single crystals of underdoped Ba(Fe_1−xCo_x)₂As₂ were detwinned by applying uniaxial pressure. The anisotropic in-plane resistivity was measured using the Montgomery method without releasing pressure. The resistivity along the a-axis shows metallic behavior down to 5 K, while the resistivity along the b-axis shows an insulator-like behavior in some temperature range. Annealing the sample radically reduces the residual resistivity for x=0, and at the same time the anisotropy becomes much smaller at low temperatures.     

Structural and physical properties of CaFe2As2

Polycrystalline and single crystalline samples of CaFe₂As₂ were prepared by using different fabrication routes. These samples show evident differences in both phase transition temperatures and transport properties depending on fabrication conditions. TEM observations reveal a rich variety of structural phenomena in these materials, such as a tweed-like pattern in self-flux samples, a structural modulation along the 〈1 1 0〉_tetra direction in the polycrystalline sample, and complex dislocation networks in the Sn-flux samples. Careful analysis shows that the twinning domains arising from the tetragonal-to-orthorhombic phase transition belong to the δ-type.     

High temperature ferromagnetism of the vacuum-annealed (In1−xFex)2O3 powders

(In_1−xFe_x)₂O₃ (x = 0.02, 0.05, 0.2) powders were prepared by a solid state reaction method and a vacuum annealing process. A systematic study was done on the structural and magnetic properties of (In_1−xFe_x)₂O₃ powders as a function of Fe concentration and annealing temperature. The X-ray diffraction and high-resolution transmission electron microscopy results confirmed that there were not any Fe or Fe oxide secondary phases in vacuum-annealed (In_1−xFe_x)₂O₃ samples and the Fe element was incorporated into the indium oxide lattice by substituting the position of indium atoms. The X-ray photoelectron spectroscopy revealed that both Fe²⁺ and Fe³⁺ ions existed in the samples. Magnetic measurements indicated that all samples were ferromagnetic with the magnetic moment of 0.49-1.73 μ_B/Fe and the Curie temperature around 783 K. The appearance of ferromagnetism was attributed to the ferromagnetic coupling of Fe²⁺ and Fe³⁺ ions via an electron trapped in a bridging oxygen vacancy.     

Gigantic uniaxial pressure effect in single crystals of iron-based superconductors

In order to elucidate the anisotropic pressure effect on superconductivity in an iron-based superconductor, magnetization measurements have been performed in Ba(Fe_0.92Co_0.08)₂As₂ single crystals under uniaxial pressures applied along the c-axis. Gigantic T_c suppression, dT_c/dP_//c = −15 K/GPa, was observed when the anisotropic deformation with the a-expansion and c-compression was induced by the c-pressure, which should be compared with dT_c/dP < +1 K/GPa in the isotropic pressure case. This suggests that the a-axis (c-axis) compression has a positive (negative) contribution to T_c.