用硬纸板制作晶系模型

自然界里的固体大多数是晶体,晶体是物质在固态时所特有的结构。晶体的外形是构成晶体的质点(离子、原子或分子)在空间的固定点上有规则地排列的内部结构的反映。根据对称性不同可把晶体划分为七个晶系,其中三斜、单斜和斜方晶系对称性最低,属于低级晶族;正方、三方和六方晶系对称性居中,属于中级晶族;等轴晶系对称性最高,属于高级晶族。     

NiSO_4·6H_2O晶体聚集体形貌及结晶学模型的建立

对四方晶系水溶性晶体NiSO4·6H2O（镍矾）进行生长实验,得到其晶体聚集体形貌.基于单偏光显微镜下的形貌观察和分析,以结晶学、晶体形貌学基本原理为基础,探讨该晶体聚集体形貌中蕴含的结晶学规律,并建立了该晶体聚集体的结晶学模型.在该模型中,晶体发育单形{110},{114},{100},{103},形成聚集体形貌时,...     

PEO分子量对POM/PEO晶/晶共混物溶液结晶的影响

以六氟异丙醇(HFIP)为聚甲醛(POM)与聚氧化乙烯(PEO)的共溶剂,通过溶液结晶研究了PEO分子量对POM/PEO 50/50晶/晶共混物结晶行为及结晶形态的影响。结果表明,PEO分子量越小,POM与PEO在结晶过程中相互干扰越大。当PEO分子量为4×103时,共混物中POM形成部分不完善晶体,出现明显的熔融双峰。SEM结果表明:含不同分子量PEO的共混晶体均无明显相分离,且低分子量PEO的共混物更易形成规整球晶,认为通过溶液结晶,POM/PEO 50/50共混物中POM与PEO形成了晶体相互穿插的结晶结构。     

共沉淀CuO-ZrO2复合氧化物分散态结构研究

用XRD、EXAFS、XPS表征了共沉淀法制备的CuO-ZrO2复合氧化物的分散态结构. 500 ℃焙烧的样品在一定组成范围内形成大体均匀的无定形态固溶体. CuO含量超过其在ZrO2中溶解度时，多余的CuO以CuO晶体形式存在；当ZrO2含量超过其在CuO中溶解度时，多余的ZrO2以四方相ZrO2晶体形式存在.焙烧温度达到800 ℃时，样品由单斜相ZrO2和CuO晶体组成.     

pH值对LaVO_4:Eu~(3+)纳米晶的相变及发光性能的影响

运用水热法通过调节p H值制备了La VO4:Eu3+纳米晶体,采用XRD,SEM,TEM,PL对产物进行了表征,研究了单一因素p H对产物物相、形貌以及发光性能的影响。XRD结果表明,p H为8时可以得到纯的四方相La VO4:Eu3+晶体;SEM与TEM结果表明,生成的产物形貌有片状、六方棒状、针状和蠕虫状;PL结果表明具有片状、针状单斜相和六方棒状四方相的La VO4:Eu3+晶体具有最好的发光性能。     

Li1.5Al0.5Ge1.5(PO4)3基固体复合电解质的制备及锂离子导电行为

将聚氧化乙烯(PEO)和二(三氟甲基磺酰)亚胺锂(LiTFSI)混合(固定EO/Li摩尔比为13)后, 采用溶液浇注法制备了一系列不同Li_1.5Al_0.5Ge_1.5(PO₄)₃(LAGP)与PEO质量比的LAGP-PEO(LiTFSI)固体复合电解质体系. 结合电化学阻抗法、 表面形貌表征以及与惰性陶瓷填料(SiO₂, Al₂O₃) 性能的对比分析, 探讨了LAGP在固体复合电解质中的作用机理以及锂离子的导电行为. 结果表明, 在以LAGP为主相的固体复合电解质中, PEO主要处于无定形态, 整个体系主要为PEO与LiTFSI的络合相、 LAGP与PEO(LiTFSI)相互作用形成的过渡相和LAGP晶相. 其中LAGP作为主要的导电基体不仅起到降低PEO结晶度、 改善两相导电界面的作用; 同时自身也可以作为离子传输的通道, 降低锂离子迁移的活化能, 从而使离子电导率得到提高. 当LAGP与PEO的质量比为6:4时, 固体复合电解质的成膜性能最好, 离子电导率最高, 在30 ℃时为2.57×10^-5 S/cm, 接近LAGP的水平, 电化学稳定窗口超过5 V.     

温控双咪唑离子液体的合成与晶体结构表征

以1-乙基咪唑和1,3-二溴丙烷(或1,5-二溴戊烷)为原料制得溴盐中间体,然后与六氟磷酸钾在水溶液中进行阴离子交换,以制备双咪唑型温控型离子液体。通过对上述两种双-(3-乙基咪唑)烷烃六氟磷酸盐进行X-射线单晶结构分析,发现两者结构相近,但晶体形貌差异较大,其中双-(3-乙基咪唑)丙烷六氟磷酸盐属于四方晶系,而另一个属于正交晶系;两者在晶胞堆积结构上呈现高度对称。另外,将双-(3-乙基咪唑)烷烃六氟磷酸盐应用到苯胺的缩合反应中,随着反应温度的升高,晶体物质渐渐溶解,达到85℃时反应体系为淡红色均相,反应结束后冷却到60℃以下,晶体物质逐渐析出,取得了较好的温控分离效果。     

Ag(TCNQ)准一维微米结构的制备及表征

利用溶液化学反应法制备了准一维结构的金属有机配合物Ag(TCNQ). X射线衍射(XRD)表明，所制备的Ag(TCNQ)为晶态结构;扫描电子显微镜(SEM)的观察证明，Ag(TCNQ)为准一维的微米管或线；Raman 测试结果表明，单根的Ag(TCNQ)形成时,Ag原子与TCNQ分子之间发生了电荷转移.对样品的制备工艺,即 Ag膜厚度和浸入溶液的反应时间对生成Ag(TCNQ)晶体形貌的影响进行了研究.结果表明，Ag膜越薄，生长出的晶体越稀疏;Ag膜与TCNQ乙腈溶液的反应时间影响其形貌的变化.反应历经三个阶段,晶体形成和长大阶段、反应完全阶段及溶解阶段.     

新型Fe(Ⅱ)Fe(Ⅲ)-SO_4~(2-)水滑石的制备及结构研究

采用共沉淀法进行了Fe?Fe?-SO42-型水滑石(FeFe-LDH)的制备研究,并利用X射线衍射、红外光谱、穆斯堡尔谱和热分析等手段对其晶体结构和稳定性进行了分析。研究结果表明:当反应投料物质的量之比Fe2+/Fe3+介于2～5之间,共沉淀pH值控制在6.5～7.5之间,反应温度为40℃,反应时间为2h时,可得到晶体结构规整的层状结构产物,所得产物的层板组成并不随投料比的改变而改变,基本保持恒定;且在FeFe-LDH层间形成了SO42-离子与H2O分子的双层排列方式,从而使层间距增大。     

咪唑类离子液体辅助水热法合成棒状微/纳米ZnO晶体

以醋酸锌和氢氧化钠为原料, 以水和含不同长度烷基链的咪唑类氯盐离子液体的混合物作为反应介质, 采用水热法合成出不同形貌的微/纳米ZnO晶体, 用扫描电子显微镜(SEM)和X射线衍射仪(XRD)对合成的ZnO晶体进行表征. 研究了烷基链长度、 离子液体用量、 反应时间以及反应温度对形成棒状ZnO晶体形貌的影响. 实验结果表明, 所制备的棒状ZnO晶体样品均为六方晶系结构. 在棒状ZnO晶体的制备过程中, 控制反应温度, 选择不同的离子液体及其用量十分重要.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.