钯催化甲酸为氢源的芳硝基化合物直接加氢和一锅法酰胺化

Pd/C催化剂实现了甲酸为氢源的芳硝基化合物的直接加氢及甲酸为氢源和羰基源的一锅法芳硝基化合物的酰胺化.在芳硝基化合物的直接加氢过程中,该体系体现了很好的催化活性,实现了对同时带有其它可还原官能团的芳硝基化合物的选择性加氢,得到较高收率的胺类化合物.同时,通过提高反应温度和增加甲酸的量,实现了芳硝基化合物的加氢和甲酰化的串联反应,该体系体现了较高的催化活性.     

连续CO2激光引发的1,1-二氟乙烷与氯的反应

本文报道了CW-CO2激光引发的CF2HCH3与Cl2的反应.除主要产物CF2=CH2外,还有CF2ClCH3. CF2ClCH2Cl. CF2=CHCl. CF2=CCl2和CF2Cl2.为了探索应用激光方法合成CF2=CH2的可能性,研究了激光输出功率. 照射时间. 反应体系中CF2HCH3与Cl2的比例及样品压力对CF2=CH2得率的影响.同时为了探讨反应机理,还进行了TEA-CO2激光引发CF2HCH3加Cl2实验和CW-CO2激光作用下CF2=CH2. CF2=CH2加Cl2的反应研究,令人感兴趣的是在激光照射CF2=CH2时,发现了双键的断裂.     

Ru/ZrO_2·xH_2O催化二氟乙酸甲酯加氢制备2,2-二氟乙醇

采用共沉淀法制备Ru/ZrO2·xH2O,以Ru/ZrO2·xH2O作为催化剂催化液相中二氟乙酸甲酯(CF2HCOOCH3)加氢制备2,2-二氟乙醇(CF2HCH2OH),并且对反应前后催化剂进行了XRD表征,考察了溶剂、搅拌速度、时间、压力和温度对加氢反应的影响。实验结果表明,在以水为溶剂、搅拌速度1000 r/min、反应时间5 h、压力2.8 MPa、温度140℃条件下,CF2HCOOCH3的转化率为100%,CF2HCH2OH的收率达到51%。     

二聚(2,5-噻吩乙烯撑)基态和激发态的电子结构: 桥基和芳环取代的影响

采用密度泛函理论(DFT)和含时密度泛函理论(TD-DFT)方法, 在B3LYP/TZVP水平下, 研究了一系列给电子基团(—NH2, —OCH3和—CH3)和吸电子基团(—CCH, —CN和—NO2)在二聚(2,5-噻吩乙烯撑)(2TV)的桥基和芳环上取代对基态和激发态电子结构的影响. 结果表明, 取代基的给/吸电子能力和取代位置对衍生物的几何结构以及吸收发射光谱均有重要影响, 其中氨基(—NH2)和硝基(—NO2)取代对2TV电子结构的影响较为显著. 此外, 对于桥基和芳环取代, 随着取代基吸电子能力的增强, 衍生物的前线分子轨道HOMO和LUMO的能级均呈逐渐降低的趋势.     

有机钛化学III.1,5-环辛二烯的钛催化均相氢化

本文研究了一系列有机钛化合物(R-C5H4)2TiCl2(R=H,CH3,C2H5,n-C3H7,CH2-CHCH2.CH3CH-CHCH2.CH3OCH2CH2,C2H5OCH2CH2,cyclo-C6H1)等)和还原剂((i-Bu)3Al,LiAlH4,i-C3H7MgBr)组成的低价钛催化体系对1,5-环辛二烯的均相催化氢化反应。结果表明,低价钛催化体系在温和条件下具有较好的催化活性,氢化时还同时发生异构化反应,并讨论茂环上取代基对反应的影响及催化机理。     

Ag/Al2O3催化乙醇和甲醚选择性还原NOx反应机理的原位红外光谱研究

 尽管C2H5OH和CH3OCH3是同分异构体,但在以Ag/Al2O3为催化剂选择性催化还原NOx时,还原剂C2H5OH比CH3OCH3具有更高的活性. 原位漫反射红外光谱研究表明, C2H5OH和CH3OCH3在还原NOx反应过程中分别遵循不同的反应机理: 在Ag/Al2O3催化C2H5OH还原剂选择性还原NOx的反应过程中,烯醇式物种(RCH=CH-O-)和NO-3物种是主要的反应中间体,二者相互反应性能很强,可以生成反应关键中间体异氰酸酯(-NCO)表面吸附物种,因此NOx的去除率很高; 而在Ag/Al2O3催化CH3OCH3还原剂选择性还原NOx的反应过程中,甲酸盐(HCOO-)物种和NO-3物种是主要的反应中间体,二者之间反应生成-NCO 的活性较弱,因而NOx的去除率较低.     

CF3CH2CF2CH3（HFC-365mfc）与Cl原子反应的微观机理及动力学性质

采用密度泛函理论方法 M06-2X结合6-31+G(d,p)基组研究了CF3CH2CF2CH3与Cl原子反应的反应机理.计算获得了CF3CH2CF2CH3的两种可区分的稳定几何构象RC1和RC2以及与它们相对应的8条氢提取反应通道和2条取代反应通道.运用改进的正则变分过渡态理论(ICVT)并结合小曲率隧道效应校正(SCT),在M06-2X/6-31+G(d,p)水平上计算了各氢提取通道的速率常数,并由Boltzmann配分函数得到总包反应的速率常数kT(cm3.molecule-1.s-1).计算结果表明,体系的总反应速率常数与已有实验值相吻合,进而给出了该反应在200～1000 K温度区间内反应速率常数kT的三参数表达式kT=1.88×10-22T3.76.exp(-1780.69/T),并讨论了两种构象RC1和RC2对总反应的贡献及各构象中氢提取发生在—CH3或—CH2—基团上的位置选择性.此外,由于缺少相关反应物及产物自由基标准生成焓ΔHf,298 K的数据,利用等化学键法估算了在上述物种的标准生成焓.     

氮杂冠醚的研究VIII:N-取代-2,3-苯并-10-氮杂-1,4,7,13-四氧杂-环十五-2-烯的合成及其对碱金属离子的配合作用

2,3-苯并-10-氮杂-1,4,7,13-四氧杂-环十五-2-烯与溴代烃或溴代多甘醇单烷基醚, 在无水碳酸钾存在下, 在乙腈中缩合制得N-取代-2,3-苯并-10-氮杂-1,4,7,13-四氧杂-环十五-2-烯化合物(1-11), 取代基为:n-C4H9, i-C5H11,n-C7H15, CH2CH2OCH3, CH2CH2OCH2CH3, CH2CH2OC4H9, (CH2CH2O)CH3, (CH2H2O)2C2H5, (CH2CH2O)2C4H9, CH2CH=CH2, 和CH2Ph。本文还考查了化合物2-4和6-11在室温下, 在氯仿-水体系中, 对苦味酸碱金属(Li^+、Na^+和K^+)盐的配合作用。     

氮杂冠醚的研究VIII:N-取代-2,3-苯并-10-氮杂-1,4,7,13-四氧杂-环十五-2-烯的合成及其对碱金属离子的配合作用

2,3-苯并-10-氮杂-1,4,7,13-四氧杂-环十五-2-烯与溴代烃或溴代多甘醇单烷基醚, 在无水碳酸钾存在下, 在乙腈中缩合制得N-取代-2,3-苯并-10-氮杂-1,4,7,13-四氧杂-环十五-2-烯化合物(1-11), 取代基为:n-C4H9, i-C5H11,n-C7H15, CH2CH2OCH3, CH2CH2OCH2CH3, CH2CH2OC4H9, (CH2CH2O)CH3, (CH2H2O)2C2H5, (CH2CH2O)2C4H9, CH2CH=CH2, 和CH2Ph。本文还考查了化合物2-4和6-11在室温下, 在氯仿-水体系中, 对苦味酸碱金属(Li^+、Na^+和K^+)盐的配合作用。     

单氢钌配合物催化氢化苯乙烯的位阻效应

研究了溶剂分别为 THF, H2O/THF, CH3CN/THF以及ROH/THF (R＝Me, Et, iso-Pr, tert-Bu)条件下TpRuH(PPh3)- (CH3CN) [Tp＝hydrotris(pyrazolyl)borate]催化氢化苯乙烯生成乙基苯的反应, 发现向干燥THF体系中添加微量 H2O, CH3CN或ROH对催化反应都具有显著的促进作用. 催化机理研究表明, 小分子添加物首先取代TpRuH(PPh3)(CH3CN)中的PPh3配体形成中间体TpRuH(CH3CN)L (L＝H2O, CH3CN或ROH), 降低空间位阻, CH3CN配体随后被苯乙烯取代生成中间体 TpRuH(H2C＝CHPh)L; η2-苯乙烯插入Ru—H键后形成的Ru-烷基中间物与H2反应生成η2-H2配合物 TpRu(CH2CH2Ph)(H2)L或TpRu[CH(CH3)Ph](H2)L, 进而发生σ-复分解反应生成乙基苯完成催化循环.     

Aromatic substitution

It is demonstrated that a previously developed topological expression for the total π-electron energy of aromatic molecules provides a good qualitative account of localization energies. The logarithm of the ratio of the algebraic structure counts for the ground state and the localized reaction intermediate is the principle energy determining factor. This expression fails for hydrocarbons with unusually small HOMO-LUMO separations. An alternative topological expression that includes a correction for this situation provides an excellent non-empirical explanation for the successful empirical use of Dewar reactivity numbers in correlating exact localization energies. The present analysis provides an explanation for the success of the traditional resonance structure counting technique in predicting relative rates of aromatic substitution. The analysis develop applied only to alternant hydrocarbons.     

Aromatic Superhalogens

No organic molecules with electron affinities near or above those of halogens are known. We show for the first time that aromaticity rules can be used to design molecules with electron affinities far exceeding those of halogen atoms either by tailoring the ligands of cyclopentadienyl or by multiple benzoannulations of cyclopentadienyl in conjunction with the substitution of CH groups with isoelectronic N atoms. Results based on density functional theory revealed that the electron affinities of some of these organic molecules can reach as high as 5.59 eV, thus opening the door to new class of superhalogens that contain neither a metal nor a halogen atom.     

Aromatic Aminocatalysis

Aromatic aminocatalysis refers to transformations that employ aromatic amines, such as anilines or aminopyridines, as catalysts. Owing to the conjugation of the amine moiety with the aromatic ring, aromatic amines demonstrate distinctive features in aminocatalysis compared with their aliphatic counterparts. For example, aromatic aminocatalysis typically proceeds with slower turnover, but is more active and conformationally rigid as a result of the stabilized aromatic imine or iminium species. In fact, the advent of aromatic aminocatalysis can be traced back to before the renaissance of organocatalysis in the early 2000s. So far, aromatic aminocatalysis has been widely applied in bioconjugation reactions through transamination; in asymmetric organocatalysis through imine/enamine tautomerization; and in cooperative catalysis with transition metals through C?H/C?C activation and functionalization. This Focus Review summarizes the advent of and major advances in the use of aromatic aminocatalysis in bioconjugation reactions and organic synthesis.     

Aromatic polyesterimides

Several novel arylene bis(trimellitate) dianhydrides have been prepared by: the acidolysis reaction of trimellitic anhydride (TMA) with aromatic diacetoxy compounds and the reaction of trimellitic anhydride monoacid chloride with diphenols. These novel aromatic bisesteranhydrides were reacted with aromatic diamines in polar solvents to give high molecular weight polyamic acid solutions. Heat converted these soluble precursors to insoluble aromatic polyesterimides having good physical and thermal properties. The mechanism of the acidolysis reaction between an aromatic acid and an aromatic acetoxy compound is briefly discussed.     

Aromatic polyamides

Kinetics of the initial degradation of poly(1,3-phenylene isophthalamide) and of poly(chloro-2, 4-phenylene isophthalamide) has been studied by TG in inert as well as oxidative atmospheres. The information derived from the kinetic data is in agreement with our earlier reported studies on the degradation mechanism of these polyamides. The difference-differential method of Freeman-Carroll is shown to have problems when applied to high-char forming polymeric materials. The isoconversion method of Ozawa involving simple computations based on a particular reaction extent, is considered suitable for studying the complex degradation behavior of high-temperature and high-char forming polymer systems. Using this procedure, an activation energy of 215–230 kJ/mole is obtained for the initial degradation of the studied aromatic polyamides in inert and oxidative environments.     

Aromatic polysulfonamides

Aromatic polysulfonamides have been prepared by solution polycondensation of aromatic disulfonyl chlorides and aromatic diamines with a suitable acid acceptor in such solvents as N,N-dimethylacetamide and tetramethylenesulfone. The highest molecular weight polymers were obtained by using 2,6-dimethylpyridine as the acid acceptor in tetramethylenesulfone as the solvent. Clear, translucent, brittle films of the polysulfonamides may be formed from solution or from melt.     

Aromatic polydiketopiperazines

Aromatic polydiketopiperazines have been prepared from bis-2-chloroacetamides of aromatic diamines in the presence of an epoxide as HCl acceptor and a quaternary ammonium halide catalyst. The structures of the polymers were characterized by infrared and NMR spectra. These polymers were soluble in organic acids such as formic acid, dichloroacetic acid, and trifluoroacetic acid but insoluble in common organic solvents such as dimethylformamide, dimethylacetamide, and dimethyl sulfoxide. Thermogravimetric analysis indicated that these polymers decomposed at 300–340°C.     

Aromatic delta-peptides

Oligoamides of 8-amino-2-carboxy-quinoline adopt a very stable helical conformation characterized in solution by 1H NMR and in the solid state by single-crystal X-ray diffraction. The helix comprises only 2.5 units per turn, which represents the highest curvature achieved by aromatic oligoamides until now. Monomers possessing alkoxy substituents in position 4 are easily available from 2-nitroaniline and dimethyl acetylenedicarboxylate.     

Aromatic fluoro-derivatives

Conclusions The action of Wilsmore's reagent on pentafluoroacetophenone leads to the formation 5,6,7,8-tetrafluorochromone and its 2-formyl derivative.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 4, pp. 893–896, April, 1969.