Apparent molar volumes of aqueous sodium trifluoromethanesulfonate and trifluoromethanesulfonic acid from 283 K to 600 K and pressures up to 20 MPa

Relative densities of NaCF₃SO₃(aq) at molalities 0.073 ≤ m/(mol-kg^-1) ≤ 1.68 were measured with vibrating-tube densimeters from 283 K to 600 K and from 0.1 MPa to 20 MPa. Relative densities of HCF₃SO₃(aq) at molalities 0.12 < m/(mol-kg^-1) < 2.1 were determined at temperatures from 283 K to 328 K at 0.1 MPa. Apparent molar volumes calculated from the measured densities were represented by the Pitzer ion-interaction treatment. The temperature and pressure dependence of the standard partial molar volume and the second virial coefficients in the Pitzer equation were expressed by empirical expressions in which the compression coefficient of water and temperature were used as independent variables. The conventional standard partial molar volumes V‡(CF₃SO ₃ ^- , aq) fromT = 283 K to 573 K were calculated from the experimental values for V‡(NaCF₃SO₃, aq) and known values for V‡(Na⁺, aq). The values of V‡(CF₃SO_3/-, aq) at temperatures from 283 K to 328 K obtained from the values of V‡(NaCF₃SO₃, aq) and V‡(HCF₃SO₃, aq) agree to within 1.2 cm³-mol^-1.     

Polyimide-polysiloxane-segmented copolymers as high-temperature polymer electrolytes

Based on the fact that the flexibility of the polymer backbone will affect the ion transport and sometimes enhance the ionic conductivity, copolymer electrolytes of 1,2,4,5-benzene-tetracarboxylic dianhydride (PMDA), 4-aminophenyl ether (ODA), and aminopropyldimethyl-terminated polydimethylsiloxane (PSX), with or without doping of lithium triflate, have been prepared and investigated by infrared spectroscopy and electrical conductivity measurements. The PSX was found to be incorporated into PMDA-ODA polyimide to form block copolymers, and the best conductivity (10^-7 s/cm at 300°C) is observed in the lithium triflate-doped PMDA-ODA-PSX copolymer with a composition of 4PMDA: 3DA: 0.6PSX: 2LiCF₃SO₃. This conductivity is about 100 times better than the result of the lithium-doped PMDA, ODA, and 2,5-diaminobenzene sulfonic acid (DABSA) copolymer (4PMDA: 3DA:1DABSA:1LiCF₃SO₃) recently reported by this group. © 1994 John Wiley & Sons, Inc.     

Hexanoyl chitosan/ENR25 blend polymer electrolyte system for electrical double layer capacitor

Single salt polymer electrolytes based on hexanoyl chitosan‐ENR25 were prepared by employing LiN (CF₃SO₂)₂ or LiCF₃SO₃ as the doping salt. Elastic property of hexanoyl chitosan was enhanced with the incorporation of ENR25. DSC studies revealed immiscibility of hexanoyl chitosan and ENR25, and dissolution of salt was favored in ENR25 phase. Conductivity enhancement was observed in the blends as compared with the neat hexanoyl chitosan. The maximum conductivities achieved for LiCF₃SO₃‐ and LiN (CF₃SO₂)₂‐comprising electrolyte systems were 1.6 × 10^?8 and 5.0 × 10^?7 S cm^?1, respectively. Deconvolution of spectra bands in the v_as (SO₂^?) mode of LiN (CF₃SO₂)₂ and v_s (SO₃^?) mode of LiCF₃SO₃ has been carried out to estimate the relative percentage of free ions and associated ions. The findings were in good agreement with conductivity results. Electrical double layer capacitor (EDLC) was fabricated with hexanoyl chitosan/ENR25 (90:10)‐LiN (CF₃SO₂)₂‐EmImTFSI electrolyte and activated carbon‐based electrodes. The conductivity and electrochemical stability window of hexanoyl chitosan/ENR25‐LiN (CF₃SO₂)₂‐EmImTFSI were ~10^?6 S cm^?1 and 2.7 V, respectively. The performance of the EDLC was analyzed by cyclic voltammetry (CV) and galvanostatic charge‐discharge (GCD). From GCD, the specific capacitance of EDLC was 58.0 F g^?1 at 0.6 mA cm^?2. The specific capacitance was found to decrease with increasing current density.     

Application of polyacrylonitrile-based polymer electrolytes in rechargeable lithium batteries

Polyacrylonitrile (PAN)-based polymer electrolytes have obtained considerable attention due to their fascinating characteristics such as appreciable ionic conductivity at ambient temperatures and mechanical stability. This study is based on the system PAN–ethylene carbonate (EC)–propylene carbonate (PC)–lithium trifluoromethanesulfonate (LiCF₃SO₃). The composition 15 mol% PAN–42 mol% EC–36 mol% PC–7 mol% LiCF₃SO₃ has shown a maximum room temperature conductivity of 1.2?×?10^?3 S cm^?1. Also, it was possible to make a thin, transparent film out of that composition. Cells of the form, Li/PAN–EC–PC–LiCF₃SO₃/polypyrrole (PPy)–alkylsulfonate (AS) were investigated using cyclic voltammetry and continuous charge–discharge tests. When cycled at low scan rates, a higher capacity could be obtained and well-defined peaks were present. The appearance of peaks elucidates the fact that redox reactions occur completely. This well proves the reason for higher capacity. The average specific capacity was about 43 Ah kg^?1. Cells exhibited a charge factor close to unity during continuous charging and discharging, indicating the absence of parasitic reactions.     

Electrical conductances of aqueous sodium trifluoromethanesulfonate from 0 to 450°C and pressures to 250 MPa

The electrical conductances of dilute (0.001 to 0.1 mol-kg^?1) aqueous sodium trifluoromethanesulfonate (NaCF₃SO₃) solutions have been measured from 0 to 450°C and pressures to 250 MPa. The limiting molar conductance $\Lambda _0 $ increases with increasing temperature from 0 to 300°C and decreasing density from 0.8 to 0.3 g-cm^?3. Above 300°C, $\Lambda _0 $ is nearly temperature independent, but increases linearly with decreasing density. The logarithm of the molal association constant of NaCF₃SO₃ calculated at temperatures from 372 to 450°C is represented as a function of temperature (Kelvin) and density of water (g-cm^?3) by $$\log K_m = 0.888 - 330.4/T - (12.83 - 5349/T)\log \rho _w $$ The relative strengths of NaCF₃SO₃ and NaCl are similar within the accuracy of the current measurements over the limited range of temperature and pressure that could be investigated here.     

Properties of a nanocomposite polymer electrolyte from an amorphous comb-branch polymer and nanoparticles

Three fully amorphous comb-branch polymers based on poly(styrene-co-maleic anhydride) as a backbone and poly(ethylene glycol) methyl ether of different molecular weights as side chains were synthesized. SiO₂ nanoparticles of various contents and the salt LiCF₃SO₃ were added to these comb-branch polymers to obtain nanocomposite polymer electrolytes. The thermal and transport properties of the samples have been characterized. The maximum conductivity of 2.8×10^–4 S cm^–1 is obtained at 28 °C. In the system the longer side chain of the comb-branch polymer electrolyte increases in ionic conductivity after the addition of nanoparticles. To account for the role of the ceramic fillers in the nanocomposite polymer electrolyte, a model based on a fully amorphous comb-branch polymer matrix in enhancing transport properties of Li⁺ ions is proposed.     

Solid state NMR study of intercalate complexes of poly(ethylene oxide) and small molecules

From solid state NMR spectra, a lower shielding of poly(ethylene oxide) (PEO) protons, in contrast to higher shielding of PEO carbons, has been found for PEO/hydroxybenzene and PEO/LiCF₃SO₃ complexes in comparison with neat PEO. The same PEO chemical shifts were found both for crystalline and amorphous phase of PEO/LiCF₃SO₃ polymer electrolyte, confirming the same interaction in both phases. Measurements of 2D ¹H CRAMPS exchange NMR spectra have been used to characterize proton distances in complexes of PEO and benzene derivatives. A close contact (∼ 0.3 nm) between aromatic and PEO protons was detected in some cases. From the measurements of the cross polarization ¹H → ¹³C, using Lee-Goldburg irradiation of ¹H nuclei, the distance between LiCF₃SO₃ carbon and the nearest PEO protons in the PEO/LiCF₃SO₃ complex was determined.     

A comparison of local structures in crystalline P(EO)3LiCF3SO3 and glyme-LiCF3SO3 systems

The newly discovered crystal structures of CH₃(OCH₂CH₂)OCH₃(LiCF₃SO₃)₂, monoglyme:(LiTf)₂, and CH₃(OCH₂CH₂)₃OCH₃(LiCF₃SO₃)₂, triglyme:(LiTf)₂, are briefly described. The coordination of lithium cations and the CF₃SO₃⁻ anions in these structures is compared with the cation and anion coordination in the crystalline phase of high molecular weight P(EO)₃LiCF₃SO₃. Comparison is also made with the previously reported crystalline phase of CH₃(OCH₂CH₂)₂OCH₃LiCF₃SO₃, diglyme:LiTf. A tendency to form trans-gauche-trans conformations for the bond order -O-C-C-O- is noted in adjacent ethylene oxide sequences interacting with a five-coordinate lithium ion.     

Solid Polymer Electrolytes Studied by NMR Spectroscopy and DFT Calculations

Summary: Results obtained recently on polymer electrolytes poly(ethylene oxide) (PEO)/LiCF₃SO₃ and poly(2-ethyl-2-oxazoline) (POZ)/AgCF₃SO₃ by a combination of solid-state ¹³C and ¹H NMR spectroscopy and DFT quantum-chemical calculations are discussed. Essentially the same local structure was found for the amorphous and crystalline phases of semicrystalline PEO/LiCF₃SO₃ polymer electrolyte. The amorphous POZ/AgCF₃SO₃ complex has a defined stoichiometry with two POZ monomeric units per one AgCF₃SO₃. A close contact between the metal salt and polymer was determined for both investigated systems from the Lee-Goldburg cross-polarization ¹H → ¹³C dynamics.     

Molar conductance of aqueous solutions of sodium, potassium, and nickel trifluoromethanesulfonate at 25‡C

The electrical conductivities of aqueous solutions of NaCF₃SO₃, KCF₃SO₃, and Ni(CF₃SO₃)₂ have been measured at 25‡C in the concentration range 1 to 25X 10^-3 mol-dm^-3 The data approach the Onsager limiting law at low concentrations, leading to a limiting molar ion conductivity for the CF₃SO ₃ ⁻ ion of 44.5±0.2 S-cm²-mol^-1, based on standard values for the cations. Using a simple size parameter for unsymmetrical polyatomic ions, based on the ion geometry, it is shown that the well known empirical relation between the molar conductivities of symmetrical ions and their radii can be extended to include certain polyatomic anions including CF₃SO ₃ ⁻ . The results suggest that the CF₃SO ₃ ⁻ ion is either a weak structure breaker in aqueous solution or neutral in this respect.     

Nano lithium aluminate filler incorporating gel lithium triflate polymer composite: Preparation,characterization and application as an electrolyte in lithium ion batteries

Gel polymer composites electrolytes containing nano LiAlO₂ as filler were prepared using a solution cast technique and characterized using different techniques such as X-ray diffraction (XRD), thermal analysis (TG, DSC), Fourier transform infra – red spectroscopy (FT-IR) and scanning electron microscope (SEM). X-ray diffraction analysis showed the effect of lithium tri fluoro methane sulphonate (LiCF₃SO₃), poly vinyl acetate (PVAc) and nano lithium aluminate (LiAlO₂) on the crystalline structure of the poly vinylidene fluoride –co– hexa fluoro propylene (PVDF-co-HFP) matrix containing ethylene carbonate (EC) and diethyl carbonate (DEC) as plasticizers. FT-IR analysis confirmed both the good dissolution of the LiCF₃SO₃ salt and the good interaction of the nano LiAlO₂ filler with the polymer matrix. TG analysis showed the good thermal stability of the LiAlO₂ samples compared to the free one. Also, addition of nano LiAlO₂ filler enhanced the conductivity value of the polymer composites electrolytes. The sample containing 2 wt% of LiAlO₂ showed the highest conductivity value, 4.98 × 10⁻³ Ω ⁻¹ cm⁻¹ at room temperature, with good thermal stability behavior (T_d = 362 °C). This good conductive and thermally stable polymer nano composite electrolyte was evaluated as a promising membrane for lithium ion batteries application.     

Plasticiser interactions with polymer and salt in PVC-LiCF3SO3-DMF electrolytes

The IR spectra of pure DMF, LiCF₃SO₃, PVC, PVC-LiCF₃SO₃, LiCF₃SO₃-DMF, PVC-DMF and PVC-LiCF₃SO₃-DMF have been studied as part of a systematic research on the interactions between the components of the PVC-based electrolytes. It has been found that Li⁺ ions interact with the chlorine atoms of PVC in PVC-LiCF₃SO₃ samples. In LiCF₃SO₃-DMF samples interactions between Li⁺ is observed to be with both the oxygen and nitrogen atoms of DMF. PVC-DMF interactions are evident from the disappearance of the C-Cl stretching vibrations and the shifts in some peaks attributed to DMF. Free ions and ion pairs are observed to be present in the PVC-LiCF₃SO₃-DMF samples which affect the ionic conductivity of the samples.     

Solid state NMR studies of syndiotactic polystyrene/ethylbenzene and poly(ethylene oxide)/LiCF3SO3 molecular complexes

Solvent dynamics and polymer-solvent interactions in syndiotactic (s) polystyrene (PS)/ethylbenzene (PhEt) clathrates, as well as polymer-salt interactions in the poly(ethylene oxide) (PEO)/LiCF₃SO₃ complex, were characterized by solid state ¹H and ¹³C NMR. ¹H static and ¹H MAS NMR spectra have shown that PhEt molecules in s-PS clathrates retain relatively large, but spatially anisotropic mobility. ¹³C CP/MAS (cross polarization/magic angle spinning) spectra and CP dynamics measured for s-PS-dg/PhEt system indicate that at least a part of PhEt molecules are intercalated between phenyl rings of s-PS. ¹³C CP/MAS NMR spectra show that PEO carbons in complex with LiCF₃SO₃ are more shielded in comparison to neat crystalline PEO. The results (distances) obtained from CP dynamics are in agreement with the published crystal structure of the PEO/LiCF₃SO₃ complex. ¹³C spin-lattice relaxation time measurements have shown that the mobility of PEO in the complex is lower than that in neat crystalline PEO.     

Investigation of mechanical properties of polyvinyl chloride-polyethylene oxide (PVC-PEO) based polymer electrolytes for lithium polymer cells

Polymer electrolytes composed of a blend of polyvinyl chloride-polyethylene oxide (PVC-PEO) as a host polymer, lithium triflate (LiCF₃SO₃) as a salt, mixture of ethylene carbonate (EC) and dibuthyl phthalate (DBP) as plasticizers and silica (SiO₂) as the nanocomposite filler were studied. Results suggest that PVC-PEO blending exhibits improved mechanical strength compared to that of pure PEO. The introduction of LiCF₃SO₃ changes the mechanical properties of PVC-PEO blends from hard and brittle to soft and tough. In PVC-PEO:LiCF₃SO₃ (70:30) system, the Young’s modulus value decreases from 5.30 × 10⁻¹ MPa to 4.78 × 10⁻⁴ MPa and the elongation at peak value increases from 3.71 mm to 32.09 mm with the incorporation of DBP and EC. The deteriorated mechanical properties with the addition of plasticizers are overcome with the addition of SiO₂ as nanocomposite filler. In PVC-PEO-LiCF₃SO₃-DBP-EC system, the addition of 5% SiO₂ increases the Young’s modulus value from 4.78 × 10⁻⁴ MPa to 1.51 × 10⁻³ MPa. The improvement of the mechanical properties reveals greater dispersion of SiO₂ particles in PVC-PEO blend based polymer electrolytes. In practical lithium polymer cells, inorganic fillers are frequently added to improve the mechanical strength of the electrolyte films.     

The short-term cycling properties of Na/PVdF/S battery at ambient temperature

The Na/PVdF/S cells were composed of solid sodium, sulfur, and polyvinylidene fluoride–hexafluoropropene (PVdF) gel polymer electrolyte. The PVdF polymer electrolyte was prepared form tetraglyme plasticizer and NaCF₃SO₃ salt, and its electrochemical properties were studied using CV and impedance analysis. The interfacial resistance between sodium and polymer electrolyte increase with storage time, which might be associated with passivation layer. Solid-state sodium/sulfur cell using a PVdF gel polymer electrolyte has been tested. The Na/PVdF/S cell with 0.288 mA cm^?2 shows a high discharge capacity of 392 mAh g^?1 and 36 mAh g^?1 after 20 cycles. The cycle performance of Na/GPE/S cell operating at 25 °C is worse than Na/S cell at a high temperature.     

Kinetics of replacement of bridging ligands in a diruthenium(II,III) cation

Tetrakis-μ-propionatodiruthenium(II,III) cation reacts with oxalate, in acidic aqueous solution (0.10 M LiCF₃SO₃, [H⁺] 0.01 M at 29.4°C) in a two-phase process. An initial rapid change results in a small decrease in absorbance. This is ascribed to replacement of one propionate ligand by oxalate. A subsequent slower reaction, of which the rate is proportional to added oxalate concentration (k_bi 1.3 M⁻¹ s⁻¹), corresponds to a relatively large increase of absorbance at 475 nm, the absorbance maximum of the product. The data indicate formation of a bis(μ-oxalato)bis(μ-propionato)diruthenium(II,III) anion with a formation constant K_f > 2 x 10⁴ M⁻¹ and an extinction coefficient of 1.3 x 10³ M⁻¹ cm⁻¹ at 475 nm. A third, much slower, change results in decomposition of that product. The occurrence of replacement of bridging ligands under mild conditions indicates that tris-μ-carboxylatodiruthenium(II,Ill) species (otherwise unknown) function as kinetic intermediates.     

二氧化硫溶于水和酸性溶液的化学状态研究

采用拉曼光谱技术，对SO₂溶于水和酸性溶液的化学状态进行了研究。测定出SO₂的特征拉曼光谱(1147 cm^-1)，表明SO₂是以SO₂·nH₂O形式存在于水和酸性溶液里。     

THE ELECTROCHEMICAL PREPARATION OF POLYPHENOL WITH CONDUCTIBILITY

Polyphenol film deposited on platinum foil can continuously grow with time during the electrolysis of a phenolsolution consisting of 0. 1 mol L~(-1) phenol, 3 mol L~(-1) NaOH and 0.5 mol L~(-1) Na_2SO_4, as has been proved by the methods ofsweep potential, constant potential and constant current, and visible spectra during the electrolysis of phenol. A polyphenolfilm with thickness of 0.11 mm was obtained by the electrolysis of phenol at a constant potential of 0.70 V (versus Ag/AClwith saturated KCl solution). Polyphenol film is inactive and stable in 2 mol L~(-1) H_2SO_4 solution, neutral solution and3 mol L~(-1) NaOH solution and in the potential range between -0.95 and 1.35 V. The usable potential range is dependent onthe pH value. Polyphenol has an ESR signal with a g factor of 2.0049. The conductivity of polyphenol is 1.2×10~(-4) S cm~(-1). Inthe solution of polyphenol dissolved in DMSO, the mobility of polyphenol anions is 8×10~(-9) m~2 s~(-1) V~(-1) at 20℃.     

氧化偶联聚合的方法合成新型电活性聚醚砜及其结构表征

通过氧化偶联聚合的方法我们制备了一种新型电活性聚芳醚砜,这种聚合物主链上含有苯基封端的苯胺四聚体齐聚物单元。我们通红外、核磁和XRD对其结构进行了表征。在1.0M的硫酸水溶液介质中我们对其电活性进行了研究,聚合物展现出两对氧化还原峰。此外,我们使用TGA测试手段对其热稳定性也做了研究。在室温质子酸掺杂的条件下聚合物的导电率为1.37 × 10-7 S·cm-1。     

Polymer electrolyte poly(ethylene oxide)/LiCF3SO3 studied by solid-state 13C NMR spectroscopy and ab initio calculations

Solid-state ¹³C NMR spectra and ab initio calculations of ¹³C NMR chemical shifts show that poly(ethylene oxide) (PEO) carbons in complex with LiCF₃SO₃ (both in crystalline and amorphous phase) are more shielded in comparison with neat PEO, due to the coordination to the Li⁺ cation. The results obtained from ¹³C NMR cross-polarization dynamics are in agreement with the published X-ray crystal structure of the PEO/LiCF₃SO₃ complex. The mobility of PEO in the crystalline complex is lower than in neat crystalline PEO.