Complexation of copper ions with histidine-containing tripeptides immobilized on solid surfaces

Short oligopeptides that complex with metal ions with high affinity and high specificity are of interest to the design of chemical sensors. In this study, we compare the complexation properties of two copper-selective tripeptides, Gly-Gly-His and His-Gly-Gly, either in aqueous solutions or immobilized on solid surfaces. Our results show that the copper complex formed by Gly-Gly-His is more stable than the complex formed by His-Gly-Gly in aqueous solutions, because the position of histidine (His) in the Gly-Gly-His permits the formation of a tetragonal copper complex with a high stability. However, when the tripeptides are immobilized on aldehyde-decorated silicon wafer surfaces under a reaction condition that gives rise to near maximum surface densities of tripeptides, both immobilized Gly-Gly-His and His-Gly-Gly experience strong steric hindrance on the over-crowded surfaces. The surface crowding effect causes less complexation with copper ions than that in aqueous solutions. To ensure a proper surface density on the surface for complexation with copper ions, a so-called two-dimensional (2D) metal-ion imprinting technique is employed to avoid the surface crowdedness. By immobilizing Gly-Gly-His in the presence of copper ions, we create a tripeptide-functionalized surface that exhibits high complexation capability for copper ions. We attribute the higher copper complexation capability to the proper intermolecular distances obtained from the ion-imprinting procedure that gives the copper-tripeptide complex a preferential tetragonal geometry. Our results show that the amounts of copper complexed to a copper-imprinted surface functionalized with Gly-Gly-His are 62% higher than those of a nonimprinted surface.     

Spacer layer screening effect: a novel fluorescent film sensor for organic copper(II) salts

A fluorescent film sensor was prepared by chemical assembly of pyrene on a glass plate surface via a long flexible spacer. It was found that the film is highly selective for some organic Cu2+ salts, such as copper acetate and copper propionate. The presence of inorganic Cu2+ salts and other metal(II) acetates, including Ni2+, Co2+, Pb2+, Cd2+, Zn2+, etc., had little effect upon the sensing behavior of the film for copper acetate or copper propionate. The observation was explained by employing a proposed "two-dimensional solution" model. The quenching by copper acetate of the emission of the film is static in nature due to complexation of the spacers to the metal ions. Furthermore, the response of the film sensor to copper acetate is fully reversible. To the best of our knowledge, this film sensor may be the first one that can differentiate greasy copper salts from inorganic copper salts.     

A novel 5-mercapto triazole Schiff base as a selective chromogenic chemosensor for Cu2+

A novel colorimetric cation sensor bearing phenol, thiol and HCN groups was designed and synthesized. In a DMSO/H2O (9:1, v/v) solution, the sensor exhibited highly selective recognition of Cu2+ among a range of metal ions tested. In the presence of Cu2+, solutions of the sensor underwent a dramatic color change from colorless to yellow, while the presence of other metal cations such as Zn2+, Pb2+, Cd2+, Ni2+, Co2+, Fe3+, Hg2+, Ag+ and Ca2+ had no effect on the color. The detection limit of the sensor toward Cu2+ is 8.0×10(-7) M and an association constant Ka of 4.3×10(5) M(-1) was measured. The sensing of Cu2+ by this sensor was found to be reversible, with the Cu2+-induced color being lost upon addition of EDTA.     

Multi-analyte sensing: a chemometrics approach to understanding the merits of electrode arrays versus single electrodes

A peptide-modified electrode array with a different peptide on each electrode is compared with a single electrode modified with many peptides for the voltammetric measurement of concentrations of Cu(2+), Cd(2+) and Pb(2+) in solution. The single gold electrode was modified simultaneously with peptides Gly-Gly-His, glutathione and angiotensin I each coupled to thioctic acid, and thioctic acid itself, and the calibration of mixtures of ions was compared with previously published data from an array of four sensors each with an individual modification. Calibration at the multi-peptide single-electrode sensor was by two-way partial least squares (voltammetric current measured with variables 'sample' x 'potential') and for the electrode array by three-way NPLS1 ('sample' x 'potential' x 'electrode'). The advantage of designing experiments to yield multi-way data is demonstrated and discussed.     

N-芳基香豆素甲基酮缩氨基硫脲对Cu2+的选择性比色识别

设计合成了2种新型N-芳基香豆素甲基酮缩氨基硫脲受体分子S1和S2, 利用紫外-可见(UV-Vis)吸收光谱考察了其对Fe3+, Hg2+, Ag+, Ca2+, Cu2+, Zn2+, Pb2+, Cd2+, Ni2+, Cr3+和Mg2+等阳离子的识别作用. 结果表明, 当加入Cu2+时, 溶液颜色立刻由无色变为黄色, 而加入其它阳离子则无变化, 从而实现了对Cu2+的裸眼检测, 具有专一选择性比色识别效果. 通过计算可知, 受体分子S2对Cu2+的络合常数大于S1, 且主客体间形成1: 1的配合物. 受体分子S2对Cu2+的检出限为2.0×10-7 mol/L, 稳定常数Ks=1.02×105 L/mol. 另外, 在EDTA存在时, 配合物可以释放出Cu2+, 与EDTA结合, 表现出对Cu2+的"off-on"模式.     

微悬臂梁检测三肽Gly-Gly-His与Cu~(2+)的相互作用过程

将三肽Gly-Gly-His(GGH)共价键合到MPA修饰的微悬臂梁表面,研究了肽与Cu2+的相互作用过程.研究发现,在Cu2+浓度较高时,Cu2+能快速与不同肽链上的羧基和咪唑环配位,并通过连锁反应诱导悬臂梁向镀金面偏转;而后肽链上的氮原子与Cu2+配位,同时构象发生变化,由直链转变成折叠状,进而增加链间的作用力使悬臂梁反向偏转;而Cu2+浓度低时不能实现连锁反应诱导悬臂梁表面快速的形成向内的拉力,直接通过构象变化推动悬臂梁反向偏转.考察了溶液pH值、Cl-浓度对GGH与Cu2+作用的影响,结果表明,在pH 7.0的条件下GGH与Cu2+作用导致悬臂梁偏转最大.Cl-的存在会与Cu2+形成CuCl2–xx配合物不易与肽链结合.     

Novel chiral N4S2- and N6S3-donor macrocyclic ligands: synthesis,protonation constants,metal-ion binding and asymmetric catalysis in the Henry reaction

New hydrophobic chiral macrocyclic ligands L1-L3 with chiral diamino and thiophene moieties have been synthesized by the Schiff base condensation approach. Protonation constants of L1 and L2 were determined by potentiometry titration. Metal-ion binding experiments exhibited that L1 and L3 are pronounced in selective recognition, Ag+, Cu2+ and Ca2+ ions among the surveyed metal ions (Cu2+, Co2+, Ni2+, Zn2+, Cd2+, Pb2+, Ag+, Li+, Na+, K+, and Ca2+). L1 was found to spectroscopically detect the presence of Cu2+ and Ca2+ to function as a multiple readout sensor. The detection limit for Ca2+ ions was found to be 9.8 x 10(-5) M in CH2Cl2-MeOH solution. The trimeric chiral ligand L3 has been shown to be an efficient auxiliary in a Zn(II)-mediated enantioselective Henry reaction.     

微波衍生-离子对高效液相-磺化四苯基卟啉光度法同时测定痕量镍、铜、锰和锌

 用磺化四苯基卟啉 (TPPS4 )作柱前衍生试剂 ,在微波作用下进行衍生反应 ,研究了衍生和分离Ni2 + ,Mn2 + ,Zn2 + 和Cu2 + 的最佳条件。在 75 0W的微波作用下衍生反应 3min ,在C18柱上采用乙腈 水 (体积比为 2 2 5∶77 5 )体系作流动相 ,四乙基溴化铵 (TEABr)作离子对试剂 ,在 415nm处检测 ,建立了微波衍生 离子对高效液相快速分离、光度检测Ni2 + ,Mn2 + ,Zn2 + 和Cu2 + 的新方法。络合物和反应试剂在 15min内出峰完毕。Zn2 + ,Cu2 + ,Ni2 + 和Mn2 + 的检测限分别为 0 0 5 μg/L ,0 0 1μg/L ,0 10 μg/L和 0 40 μg/L。     

A new fluorescent chemosensor for copper ions based on tripeptide glycyl-histidyl-lysine (GHK)

[structure: see text]. A new fluorescent chemosensor for Cu2+ ions was synthesized by modifying the tripeptide glycyl-histidyl-lysine (GHK) with 9-carbonylanthracene via the standard Fmoc solid-phase peptide synthesis method. While significant fluorescence quenching was observed from the molecule upon binding with Cu2+, addition of Fe2+, Co2+, Ni2+, and Zn2+ to the peptide solution caused a minimum fluorescence emission spectral change, indicating a high specificity of this chemosensor for Cu2+ ions. Effects of pH were also investigated.     

Uptake of transition metal ions using liposomes containing dicetylphosphate as a ligand.

The uptake of Cu2+ was investigated using various types of liposomes composed of phosphatidylcholine (PC), cholesterol (Chol) and dicethylphosphate (DCP). DCP played a role as a ligand for Cu2+. Multilamellar vesicles (MLVs) were more effective for the uptake of Cu2+ compared to unilamellar vesicles prepared by the extrusion technique. The uptake efficiency of MLVs for Cu2+ was dependent on the molar ratio of DCP in MLVs. The uptake percent of Cu2+ was 92% using MLVs having a PC:DCP:Chol molar ratio of 4:3:3; 95% of the total vesicle Cu2+ was bound to DCP of the outer membrane surface of the MLVs, and the remaining 5% of the total Cu2+ was distributed into the interior side of the MLVs. MLVs having a PC:DCP:Chol molar ratio of 4:3:3 were also effective as separation media for Mn2+, Co2+, Ni2+ and Zn2+. The uptake efficiency of the MLVs for the transition-metal ions increased in the order Co2+ < Zn2+ < Ni2+ < Mn2+ < Cu2+.     

Diastereoselective DNA cleavage recognition by Ni(II) x Gly-Gly-His-derived metallopeptides

Site-selective DNA cleavage by diastereoisomers of Ni(II) x Gly-Gly-His-derived metallopeptides was investigated through high-resolution gel analyses and molecular dynamics simulations. Ni(II) x L-Arg-Gly-His and Ni(II) x D-Arg-Gly-His (and their respective Lys analogues) targeted A/T-rich regions; however, the L-isomers consistently modified a subset of available nucleotides within a given minor groove site, while the D-isomers differed in both their sites of preference and their ability to target individual nucleotides within some sites. In comparison, Ni(II) x L-Pro-Gly-His and Ni(II) x D-Pro-Gly-His were unable to exhibit a similar diastereoselectivity. Simulations of the above systems, along with Ni(II) x Gly-Gly-His, indicated that the stereochemistry of the amino-terminal amino acid produces either an isohelical metallopeptide that associates stably at individual DNA sites (L-Arg or L-Lys) or, with D-Arg and D-Lys, a noncomplementary metallopeptide structure that cannot fully employ its side chain nor amino-terminal amine as positional stabilizing moieties. In contrast, amino-terminal Pro-containing metallopeptides of either stereochemistry, lacking an extended side chain directed toward the minor groove, did not exhibit a similar diastereoselectivity. While the identity and stereochemistry of amino acids located in the amino-terminal peptide position influenced DNA cleavage, metallopeptide diastereoisomers containing L- and D-Arg (or Lys) within the second peptide position did not exhibit diastereoselective DNA cleavage patterns; simulations indicated that a positively charged amino acid in this location alters the interaction of the metallopeptide equatorial plane and the minor groove leading to an interaction similar to Ni(II) x Gly-Gly-His.     

Preparation of Cu-Ni alloy nanocrystallites in water-in-oil microemulsions

The well-mixed copper-nickel nanoparticles were prepared when the molar ratio of Cu2+ to Ni2+ was 1:1 by simultaneous reduction of CuSO4 and NiCl2 with hydrazine in the microemulsion of SDS/n-butanol/n-heptane/water at 70 degrees C, and was characterized by TEM, ED, TGA, EDS, and XRD. ED analysis and XRD patterns suggest the formation of the homogeneous alloy structure in the bimetallic nanoparticles. Average size of the sample calculated from the full width at medium height of peak 111 in the XRD patterns using Scherrer formula is 5.53 nm. TEM photographs show a narrow distribution of Cu-Ni nanoparticles that essentially are monodispersed and the mean diameter is 12 nm. The results indicate that the composition and size of alloy nanoparticles depend on the mole ratio of H2O to SDS, the method of addition of Cu2+ and Ni2+, and the mole ratio of Cu2+ and Ni2+ in the initial precursor solution.     

吡咯并[2,1,5-cd]中氮茚酰腙衍生物的合成及Cu2+荧光探针行为

设计合成了吡咯并[2,1,5-cd]中氮茚酰腙衍生物6. 测试了其紫外光谱和荧光光谱, 研究了其对铜离子的选择性识别作用. 结果表明, 化合物6作为铜离子荧光探针, 受常见离子干扰较小, 对于铜离子有着较高的选择性和较低的检出限.     

Detection of Ni2+ by a dimethylglyoxime probe using attenuated total-reflection infrared spectroscopy.

A new analytical approach for the detection of Ni2+ utilizing an attenuated total reflection (ATR) technique is discussed in this paper. Nickel detection was accomplished on a silicon ATR parallelogram crystal uniformly coated by a ca. 1.5-microm Nafion film embedded with dimethylglyoxime (DMG) probe molecules. The detection of Ni2+ is based on the appearance of a unique infrared absorption peak at 1572 cm(-1) that corresponds to the C=N stretching mode in the nickel dimethylglyoximate, Ni(DMG)2, complex. The suitable operational pH range for the nickel infrared sensor is between 6 - 8. High alkalinity in the sample solution causes a leaching of Ni(DMG)2. The detection limit of the nickel infrared sensor is 1 ppm in a sample solution of pH = 8. Interference studies revealed that Cu2+ could compete with Ni2+ for the DMG sites in the Nafion matrix. The new nickel detection methodology can be potentially utilized, after further improvement, in field analysis to locate hot spots contaminated with a high ppm of Ni2+.     

溶剂化金属原子浸渍法制备高分散负载型催化剂(Ⅶ)——Ni-Cu/SiO2双金属催化剂的结构与性能

利用金属蒸气法制备了不同组成的Nj-CujSiO₂双金属催化剂,XRD、TEM和磁性测定表明有Ni-Cu合金形成,合金颗粒的组成不均匀,而且有部分自由的Ni和Cu存在;Ni/Cu摩尔比为1:1催化剂的催化活性大于2:1和3:1的双金属催化剂以及Ni和Cu的单金属催化剂。     

基于N-(9-蒽甲基)-L-组氨酸的NOR荧光逻辑门

合成了一个新的组氨酸衍生物, N-(9-蒽甲基)-L-组氨酸(1), 并对其进行了元素分析、电喷雾电离质谱(ESI-MS)、核磁共振氢谱(1H-NMR)和碳谱(13C-NMR)等波谱表征. 考查了pH值及15种不同金属离子对其荧光强度的影响. 实验结果表明, 中性水溶液条件下, Zn2+和Cd2+能使体系荧光增强, 而Pb2+、Co2+、Hg2+、Ni2+和Cu2+等则使体系荧光有不同程度的猝灭.其中, Cu2+和Ni2+猝灭能力最强, 它们与化合物1均形成了物质的量比为1:2的配合物, 络合常数分别为2.88×10⁶和1.12×10⁶ L2·mol-2. Cu2+和Ni2+对化合物1的荧光猝灭为静态猝灭过程. 在此基础上, 以Cu2+和Ni2+作为两个输入信号, 以蒽的特征荧光发射作为输出信号, 构建了一个NOR荧光分子逻辑门.     

A copper(II) ion-selective on-off-type fluoroionophore based on zinc porphyrin-dipyridylamino

A new copper(II) fluorescent sensor 5,10,15,20-tetra((p-N,N-bis(2-pyridyl)amino)phenyl)porphyrin zinc (1) has been designed and synthesized by the Ullmann-type condensation of bromoporphyrin zinc with 2,2'-dipyridylamine (dpa) under copper powder as a catalyst as well as with K2CO3 as the base in a DMF solution. It consists of two separately functional moieties: the zinc porphyrin performs as a fluorophore, and the dpa-linked-to-zinc porphyrin acts as a selected binding site for metal ions. It displays a high selectivity and antidisturbance for the Cu2+ ion among the metal ions examined (Na+, Mg2+, Cr3+, Mn2+, Fe2+, Co2+, Ni2+, Cu2+, Ag+, Zn2+, Cd2+, Hg2+, and Fe3+) and exhibits fluorescence quenching upon the binding of the Cu2+ ion with an "on-off"-type fluoroionophoric switching property. The detection limit is found to be 3.3 x 10(-7) M (3s blank) for Cu2+ ion in methanol solution, and its fluorescence can be revived by the addition of EDTA disodium solution. The design strategy and remarkable photophysical properties of sensor 1 help to extend the development of fluorescent sensors for metal ions.     

Nickel and copper complexes of a chelating methacrylate sorbent in the purification of chitinases and specific immunoglobulin G1 by immobilized metal ion affinity chromatography

The isolation of the isoforms of endo- and exochitinases of Clostridium aminovalericum T1 and of the horseradish peroxidase (HRP)-specific immunoglobulin G1 from natural sources by immobilized metal ion affinity chromatography was studied. The effect of Cu2+ and Ni2+ complexes of iminodiacetic acid incorporated in porous glycidyl methacrylate-co-ethylene dimethacrylate and in agarose (Sepharose Fast Flow) beads on separation of the target polypeptides was analyzed. It was found that the Cu2+ complexes bound both the HRP-specific IgG1 and some isoforms of chitinases more strongly than the Ni2+ complexes. From the former complexes, both target polypeptides were eluted by a stepwise imidazole concentration gradient of 5-100 mM. The lower strength of Ni2+ complex binding with the HRP-specific IgG1 resulted in its easy elution with a pH gradient of 5.5-5 while some isoforms of chitinases required imidazole for their elution. The "fraction elution degree" of a target polypeptide (i.e., the ratio of its amounts in each eluate fraction and in the combined fractions) was used for the evaluation of the sorption selectivity and binding affinity of the separating components to the studied metal complexes.     

Using micelles for a new approach to fluorescent sensors for metal cations

A new approach based on self-assembly inside micelles has been individuated to prepare a system behaving as a water-operating selective fluorescent sensor for Cu2+ and Ni2+.     

非样品手性配体交换毛细管电泳测定手性多巴

以L-多巴为测定目标, 以天然芳香氨基酸为替代样品, 建立了以非样品α-羟基酸为手性配体, 以铜和镍等二价金属为中心离子的手性配体交换毛细管电泳新方法. 当弱配位的α-羟基酸与中心离子的摩尔比大于6∶1时, 所建立的方法即可实现对D,L-氨基酸和D,L-多巴的基线分离, 可用于口服多巴药片含量的测定, 检测出质量分数为0.5%的异构体杂质, 其定量的线性范围是0.025~2.5 mmol/L, 回收率为96.3%. 据此方法测得某商品药片的实际含量(质量分数)为标称值的(97.33±0.70)%.