高效半解析方法分析周期正交加筋板的振动-声辐射特性

为了对水下无穷大双周期正交加筋板结构模型在简谐面力激励下的振动响应及声辐射特性进行更为合理的理论预测与分析,建立了加筋板结构的数学模型。结合傅里叶变换、泊松迭加公式及空间波数法,将周期加筋板的振动响应及辐射声压表达为关于结构位移谐波分量的函数方程,对加筋板模型提出了高效分析求解方法并进行了谐波分量截断求解。验证了方法的正确性,并分析了结构的振动特性以及加强筋周期间距和扭矩对辐射声压的影响。结果表明,加强筋的扭转作用影响加筋板结构的振动模态频率,对于较高精度要求的工程应用,加强筋的扭转作用不能忽略。通过调节加强筋周期间距及横截面尺寸,可以降低薄板在较低频域区间的远场辐射声压。      

Elastic response of an acoustic coating on a rib-stiffened plate

This paper develops a three-dimensional analytical model of a fluid-loaded acoustic coating affixed to a rib-stiffened plate. The system is loaded by a plane wave that is harmonic both spatially and temporally. The model begins with Navier-Cauchy equations of motion for an elastic solid, which produces displacement fields that have unknown wave propagation coefficients. These are inserted into stress equations at the boundaries of the plate and the acoustic coating. These stress fields are coupled to the fluid field and the rib stiffeners with force balances. Manipulation of these equations develops an infinite number of indexed equations that are truncated and incorporated into a global matrix equation. This global matrix equation can be solved to determine the wave propagation coefficients. This produces analytical solutions to the systems’ displacements, stresses, and scattered pressure field. This model, unlike previously developed analytical models, has elastic behavior and thus incorporates higher order wave motion that makes it accurate at higher wavenumbers and frequencies. An example problem is investigated for three specific model results: (1) the dynamic response, (2) a sonar array embedded in the acoustic coating, and (3) the scattered pressure field. An expression for the high frequency limitation of the model is derived. It is shown that the ribs can have a significant impact on the structural acoustic response of the system.     

Estimation of broadband acoustic power due to rib forces on a reinforced panel under turbulent boundary layer-like pressure excitation. II. Applicability and validation

The previous paper showed that, when the attachment forces on a rib-reinforced panel subjected to turbulent boundary layer excitation can be considered to radiate independently, the rib-related acoustic power in a broad (e.g., one-third octave) frequency band can be estimated as the product of the average mean squared force, the real part of the radiation admittance of an attachment force, and the number of ribs. This paper shows that the radiation condition is always approximated when the acoustic wavelength is less than twice the rib spacing of a periodically reinforced panel, and generally applies at lower frequencies where the acoustic wavelength is less than four times the rib spacing. The procedure is used to estimate the broadband acoustic power radiated per rib of an infinite periodically reinforced membrane and plate in water, and the results are shown to agree with those of "exact" calculations.     

流体加载下加肋板结构的声辐射特性研究

本文采用有限元和边界元方法对加肋板结构的声辐射进行了计算分析,研究分析了加肋板结构的板厚、板面积、板边长比、肋骨惯性矩和间距、边界条件以及板材和流体介质等对结构辐射声功率的影响,得到了一些有意义的结论,从而为揭示加板结构声辐射规律,降低结构的声辐射提供了一定的依据。     

结构振动和声辐射的可控性和可观性指标

结构振动和声辐射的可控性和可观性指标对有源控制系统作动器/传感器的布置具有重要意义。对结构振动和声辐射的可控性和可观性指标进行了研究,提出了基于声压输出的振动模态可观性指标,在振动模态可控性和可观性指标的基础上,结合振动模态的声辐射效率,提出了结构声辐射的可控性和可观性指标和基于声压输出的可观性指标。以板结构为例,对结构振动和声辐射的可控性和可观性指标进行了计算分析和讨论,比较了基于声压输出和基于振动响应输出的振动模态可观性,重点研究了基于声压输出的振动模态可观性和结构振动及声辐射的可观性特点,最后对指标值在结构声有源控制中输入(输出)位置选择上的应用进行了讨论和比较,通过数值仿真对指标的有效性进行了验证。      

Controllability and observability measures of structural vibration and acoustic radiation

This paper studies the controllability and observability measures of structural vi?bration and acoustic radiation and proposes a measure of modal observability based on acoustic pressure outputs and measures of controllability and observability of acoustic radiation by combining the measures of modal controllability and observability of vibration modes with corresponding modal acoustic radiation efficiencies. A plate with control force inputs and vibrational response outputs and acoustic pressure outputs is involved to show the modal controllability and observability measures of vibration modes and measures of controllability and observabil?ity of structural vibration and acoustic radiation. Observability measures based on vibrational response outputs and acoustic pressure outputs are compared and the emphasis is on the mea?sures based on the acoustic pressure outputs. Finally the application and usefulness of the controllability and observability measures to active control of structural vibration and acous?tic radiation are illustrated and compared. It shows that the controllability and observability measures provide useful guidance for active control design especially in optimal actuator and sensor placement.     

覆黏弹层加肋双层板的声反射

为评估覆盖层的吸声性能,研究黏弹层在无限大周期加肋双层板背衬下的声反射。首先通过弯曲波与Lamb波的比较,揭示了板近似理论不适用于黏弹性板的原因。为此采用(黏)弹性理论处理(黏)弹性板,而肋板的处理则采用板近似理论,并用Hull提出的方法解决肋板和平板的耦合问题,得到反射声场的解。与板近似理论计算加肋双层板声反射的结果进行比较验证了本文方法的正确性,对反射系数进行计算分析了背衬对声反射的影响,定义平均反射系数比较了不同覆盖层的性能。结果表明,频率较低时覆盖层无法有效抑制背衬的影响,板间流体层与双层板的耦合作用引起共振散射,肋板与双层板的耦合作用降低声反射。      

STUDY ON THE RADIATION ACOUSTIC FIELD OF RECTANGULAR RADIATORS IN FLEXURAL VIBRATION

In this paper, the radiation acoustic field of a rectangular radiator in flexural vibration is studied. The radiator is a rectangular thin plate in flexural vibration with simply supported boundary conditions. Based on the theory of Rayleigh integral, the acoustic pressure distribution of the radiator in its far field is obtained analytically and the near acoustic field of the radiator is also computed numerically. In the near field, the three-dimensional acoustic pressure distribution is obtained. In the far field, the two- and three-dimensional acoustic pressure distribution patterns are calculated. The dependence of the radiation acoustic pressure of the radiator on the vibrational order of the plate in flexural vibration is analyzed. It is demonstrated that the radiation acoustic pressure along the central axis of the radiator is always zero in the near and far acoustic fields, and the radiation near acoustic field and the far acoustic field are both directional. This is different from the acoustic field generated by an oscillating piston. On the other hand, when the vibrational order is increased, the acoustic pressure distribution of the radiator becomes complex.     

Modeling vibrational energy transmission at bolted junctions between a plate and a stiffening rib

An analytical model is presented for structure-borne sound transmission at a bolted junction in a rib-stiffened plate structure. The model is based on the wave approach for junctions of semi-infinite plates and calculates coupling loss factors required by statistical energy analysis. The stiffening rib is modeled as a plate strip and the junction is represented by an elastic interlayer with a spatially dependent stiffness. Experimental verification is carried out on a series of Plexiglas plate structures with varying rib depth and bolt spacing. A well-defined connection length at the junction was created by inserting thin spacers between the plate and the rib at each bolt. Comparison between numerical and experimental data for this case showed good agreement. Measured results for the bolted junction without spacers suggested that structure-borne sound transmission could be modeled as a series of connections characterized by a finite connection length. This concept is explored further by determining an equivalent connection length which gives the best agreement between numerical and experimental data.     

Flexural vibration of perforated plates and porous elastic materials under acoustic loading

This paper presents a method of theoretical treatment of acoustic coupling due to flexural vibration of perforated plates and plates of porous elastic materials. The analytical model is developed by introducing flow continuity at the plate surface in a spatially mean sense and air-solid interaction within the plate material. To demonstrate the method of application, some fundamental acoustic problems based on a classical thin-plate theory are analyzed and discussed in relation to the interactive effect of flexural vibration and plate permeability. For acoustic radiation from a vibrating plate excited by a harmonic point-force, the attenuation effect of power radiation appears at frequencies below the critical frequency of coincidence. In the problem of sound absorption of a perforated plate or a plate of porous elastic material backed by an air layer, as permeability decreases, the effect of plate vibration increases. For perforated absorber systems including plate vibration effects, the trend of variation from ordinary theory depends on plate thickness.     

一种分析周期加筋板声辐射的高效方法

为了研究周期加筋板的声辐射特性,建立了一种计算水中周期加筋板在简谐点力作用下的远场辐射声压的高效方法。该方法借助于傅里叶变换法只要先将耦合系统的声振方程,加强筋的弯曲和扭转运动方程,声学波动方程和耦合边界条件转换到波数域中,联合求解得到一组关于平板横向位移的无限大耦合代数方程组,再将该方程组截断成有限大小由数值方法求出波数域中的位移响应,便可结合稳相法得到远场辐射声压。与现有方法给出的结果对比发现二者完全吻合,验证了本文方法的有效性;通过数值方法研究了激励力位置、板厚,加强筋间距和宽度对周期加筋板声辐射特性的影响,得到了具有实际意义的结论。      

Sound radiation from fluid loaded orthogonally stiffened plates

The radiation of sound from infinite fluid loaded plates is examined when the plates are reinforced with two sets of orthogonal line stiffeners. The stiffeners are assumed to be equally spaced and exert only forces on the plate. The response to a convected harmonic pressure is found by using Fourier transforms and is given in terms of the harmonic amplitudes of the stiffener forces. These forces satisfy an infinite set of simultaneous equations to which a numerical solution must be found. An expression for the response to a general excitation is derived and from this the acoustic pressure in the far field is determined with particular reference to point force excitation.     

降低加肋双层圆柱壳辐射噪声线谱的结构声学设计

为降低双层圆柱壳辐射噪声线谱,从控制内壳振动响应和衰减壳间振动传递率进行结构声学设计。采用机械阻抗理论分析了环肋圆柱壳模态响应控制机理;由环肋振动方程推导分析了环肋径向机械阻抗特性;基于阻抗失配、波形转换原理提出一种阻抗加强环肋,分析了振动波阻抑特性;利用阻尼减振技术,综合考虑肋板的刚度、阻尼特性,设计了金属橡胶层叠肋板;结合数值计算实例,分析了设计双层壳模型的声辐射性能。结果表明:设计的双层加肋圆柱壳结构能有效降低辐射噪声线谱,在分析频段内辐射声压线谱平均降低约6.6 dB。研究结果对研制低噪声水下航行器具有良好的工程价值和应用前景。      

Scattering from a ribbed finite cylindrical shell with internal axisymmetric oscillators

A theoretical formalism is elaborated to determine the acoustic field scattered from a finite cylindrical shell reinforced by a set of ribs with internal axisymmetric oscillators, the locations and properties of which can vary arbitrarily along the cylinder axis. Analytical expressions are derived for the scattered pressure and approximate expressions are proposed to calculate the backscattered field. Some applications have been carried out to investigate the problem of backscattering from a periodically ribbed finite cylindrical shell in the presence of rib aperiodicity or axisymmetric internal oscillators. The modifications of the main features associated with scattering from helical and Bloch-Floquet waves are examined and numerical results are presented with respect to the mean rib spacing and to the total mass of the internal structures.     

双层加筋板低频声的隔离与有源控制

为探讨加筋对双层结构低频隔声及有源控制的影响,分析了筋条数目及布放位置对双层加筋结构低频隔声性能、有源控制策略选取及有源隔声性能的影响。首先利用模态叠加与声-振耦合理论对双层加筋结构建模,然后采用数值算例对上述问题展开探讨。研究发现,筋条数目增多或筋条靠近基板的中间位置布放,将有利于双层加筋结构低频隔声性能的提高。对于有源控制措施,声控制策略与力控制策略相比,前者的控制效率较高且降噪效果较好。由于筋复杂的耦合影响,添加多条筋或筋条靠基板中间布置时有源控制效果减弱,需施加多个点源才能获得较好的降噪效果。      

板厚对无障薄板声辐射特性影响的分析

分析无障薄板的声辐射特性时通常忽略板厚对格林函数的影响而采用双层势计算.本文考虑板厚引起的声辐射阻抗,采用混合势计算结构表面声压与振速,并分析板厚对声辐射参数的影响。根据交界相容性条件,采用边界积分方程分别表示平板上下表面的声压和振速,并合并同类项.进一步将结构的动力方程代入混合势形式的振速方程中,离散声压差值和板的位移为振动模态叠加的形式,获得二重积分形式的声辐射阻抗,从而求解振动模态系数,确定声辐射特性参数.以水下简支矩形板为例计算对比了声辐射参数,并讨论了其对板厚的敏感性。结果表明:板厚引起的声辐射阻抗对声辐射参数的大小影响较小,但随着频率的增加致使共振频率发生较大偏移;在相同阶数的共振频率范围内,板厚度越大,采用双层势计算的误差越大。      

Acoustic reflection of rib-stiffened double plates coated with a viscoelastic layer

To predict sound-absorbing performance of anechoic materials,the acoustic reflection problem of a viscoelastic layer backed with periodically rib-stiffened infinite double plates is studied in this paper.The reason why structural theories of plates are not applicable to viscoelastic plates is explained through comparing dispersion and attenuation curves of flexural waves with those of Lamb waves.As a result,（visco-）elastic theory is adopted to deal with（visco-）elastic plates,and ribs are treated by structural theories of plates.The coupling between ribs and plates are solved by Hull＇s method,and solution of the reflected field is obtained.The accuracy of present method is validated by comparing with the results by the structural theories of plates.The influence of a backing on the acoustic reflection of the viscoelatic layer is analyzed by computing reflection coefficients.Performances of different viscoelastic materials are evaluated by the average reflection coefficients.The computational results show that,influence of a backing on the acoustic reflection cannot be suppressed by the viscoelastic materials in low frequencies.The resonance is determined by the coupling of the fluid layer and the double plates.And ribs,which are coupled with the double plates,mainly reduce the acoustic reflection.     

Reduction of radiated exterior noise from the flexible vibrating plate of a rectangular enclosure using multi-channel active control

This study attempted to control the radiated exterior noise from a rectangular enclosure in which an internal plate vibrates by acoustic excitation and noise is thus radiated from that plate. Multi-channel active control was applied to reduce the vibration and external radiation of this enclosed plate. A piezoelectric ceramic was used as a distributed actuator for multiple mode control of the vibration and radiated noise in the acoustically excited plate. To maximize the effective control, an approach was proposed for attachment the piezoelectric actuator in the optimal location. The plate and internal acoustic space in the enclosure are coupled with each other. This will change dominant frequency characteristics of the plate and, thus, those of the externally radiated noise. Active noise control was accomplished using an accelerometer attached to the plate and a microphone placed adjacent to that plate as an error sensor under acoustic excitation of sine wave and white noise. It was found that the control of radiated external radiation noise requires a microphone as an error sensor, a sound pressure sensor due to vibration of the plate, differences in the dominant frequency of externally radiated noise, and complex vibration modes of the plate.     

磁致伸缩换能器辐射板形状对声场分布的影响

磁致伸缩换能器可作为热声制冷机的声源装置,辐射板的形状直接影响声压输出效率,从而影响制冷效果。为提高换能器工作效率、减小换能器体积,辐射板需在Terfenol-D棒的激励下产生大振幅、高频率的活塞振型。针对这一问题,应用ATILA软件分析了磁致伸缩换能器辐射板形状对谐振腔振动幅频特性的影响以及对谐振腔内声场分布的影响。结果表明:相同激励条件下,凹球面辐射板出现活塞振型时振幅最大,对应谐振腔中声压幅值最高;谐振腔端面形状为凹球面时,具有聚焦声压幅值的作用;端面形状为凹发射端-凸反射端组合的谐振腔内声压幅值最高。以上结论为合理设计辐射板、谐振腔两端面组合形状提供了参考。