Intra-puff CO and CO2 measurements of cigarettes with iron oxide cigarette paper using quantum cascade laser spectroscopy

The objective of this research was to apply Fourier transform infrared spectroscopy (FTIR) and tunable infrared laser differential absorption spectroscopy (TILDAS) for measuring selected gaseous constituents in mainstream (MS) and sidestream (SS) smoke for experimental cigarettes designed to reduce MS CO using iron oxide cigarette papers. These two complimentary analytical techniques are well suited for providing per puff smoke deliveries and intra-puff evolution profiles in cigarette smoke respectively. The quad quantum cascade (QC) laser high resolution infrared spectroscopy system has the necessary temporal and spectral resolution and whole smoke analysis capabilities to provide detailed information for CO and CO(2) as they are being formed in both MS and SS smoke. The QC laser system has an optimal data rate of 20 Hz and a unique puffing system, with a square wave shaped puff, that allows whole smoke to enter an 18 m, 0.3 L multi-pass gas cell in real time (0.1s cell response time) requiring no syringe or Cambridge filter pad. Another similar multi-pass gas cell with a 36 m pathlength simultaneously monitors the sidestream cigarette smoke. The smoke from experimental cigarettes manufactured with two types of iron oxide papers were compared to the smoke from cigarettes manufactured similarly without iron oxide in the paper using both instrument systems. The delivery per puff determined by the QC laser method agreed with FTIR results. MS CO intra-puff evolution profiles for iron oxide prototype cigarettes demonstrated CO reduction when compared to cigarettes without iron oxide paper. Additionally, both CO and CO(2) intra-puff evolution profiles of the cigarettes with iron oxide paper showed a significant reduction at the initial portion of the 2 s puff not observed in the non-iron oxide prototype cigarettes. This effect also was observed for ammonia and ethylene, suggesting that physical parameters such as paper porosity and burn rate are important. The SS CO and CO(2) deliveries for the experimental cigarettes evaluated remained unaffected. The iron oxide paper technology remains under development and continues to be evaluated.     

Time-resolved analysis of the emission of sidestream smoke (SSS) from cigarettes during smoking by photo ionisation/time-of-flight mass spectrometry (PI-TOFMS): towards a better description of environmental tobacco smoke

In this study, the chemical composition of sidestream smoke (SSS) emissions of cigarettes are characterised using a laser-based single-photon ionisation time-of-flight mass spectrometer. SSS is generated from various cigarette types (2R4F research cigarette; Burley, Oriental and Virginia single-tobacco-type cigarettes) smoked on a single-port smoking machine and collected using a so-called fishtail chimney device. Using this setup, a puff-resolved quantification of several SSS components was performed. Investigations of the dynamics of SSS emissions show that concentration profiles of various substances can be categorised into several groups, either depending on the occurrence of a puff or uninfluenced by the changes in the burning zone during puffing. The SSS emissions occurring directly after a puff strongly resemble the composition of mainstream smoke (MSS). In the smouldering phase, clear differences between MSS and SSS are observed. The changed chemical profiles of SSS and MSS might be also of importance on environmental tobacco smoke which is largely determined by SSS. Additionally, the chemical composition of the SSS is strongly affected by the tobacco type. Hence, the higher nitrogen content of Burley tobacco leads to the detection of increased amounts of nitrogen-containing substances in SSS.     

Quad quantum cascade laser spectrometer with dual gas cells for the simultaneous analysis of mainstream and sidestream cigarette smoke

A compact, fast response, infrared spectrometer using four pulsed quantum cascade (QC) lasers has been applied to the analysis of gases in mainstream (MS) and sidestream (SS) cigarette smoke. QC lasers have many advantages over the traditional lead-salt tunable diode lasers, including near room temperature operation with thermoelectric cooling and single mode operation with improved long-term stability. The new instrument uses two 36 m, 0.3 l multiple pass absorption gas cells to obtain a time response of 0.1s for the MS smoke system and 0.4s for the SS smoke system. The concentrations of ammonia, ethylene, nitric oxide, and carbon dioxide for three different reference cigarettes were measured simultaneously in MS and SS smoke. A data rate of 20Hz provides sufficient resolution to determine the concentration profiles during each 2s puff in the MS smoke. Concentration profiles before, during and after the puffs also have been observed for these smoke constituents in SS smoke. Also, simultaneous measurements of CO(2) from a non-dispersive infrared (NDIR) analyzer are obtained for both MS and SS smoke. In addition, during this work, nitrous oxide was detected in both the MS and SS smoke for all reference cigarettes studied.     

Optimization and validation of a gas chromatographic method for analysis of (RS,SR)-diastereoisomeric impurity in formoterol fumarate

The levels of 2-amino-9H-pyrido[2,3-b]indole (AalphaC or 2-amino-alpha-carboline), 2-amino-3-methyl-9H-pyrido[2,3-b]indole (MeAalphaC or 2-amino-3-methyl-alpha-carboline), 9H-pyrido[3,4-b]indole (norharman), and 1-methyl-pyrido[3,4-b]indole (harman) have been determined in the mainstream smoke condensate from three reference cigarettes, namely Kentucky reference 1R5F, Kentucky reference 2R4F, and CORESTA CM4. The amino-alpha-carbolines, and norharman and harman (beta-carbolines) can be classified as heterocyclic aromatic amines (HAAs) and are listed as biologically active agents in the mainstream smoke of cigarettes. For the analysis, the mainstream smoke condensate from cigarettes was collected on a filter pad, the analytes were isolated using solid-phase extraction (SPE), and quantified without derivatization on a GC-MS. Total amounts of carbolines found in the condensate increased from ultralight 1R5F to full-flavor CM4 cigarettes. The level of harman was about 250 ng/cigarette for the 1R5F cigarette and about 1025 ng/cigarette for the CM4 cigarette. Norharman was typically three times more abundant than harman. The AalphaC was found at about 10 times lower level compared to harman, and MeAalphaC was about 50 times lower than harman. The use of reference cigarettes can provide a common measure for laboratories to assess carboline amounts among cigarette brands.     

Determination of Cd levels in smoke condensate of Brazilian and Paraguayan cigarettes by Thermospray Flame Furnace Atomic Absorption Spectrometry (TS-FF-AAS)

In this study, the concentrations of Cd in smoke condensate of Paraguayan and Brazilian full flavor normal size cigarettes were determined. A “fishtail” chimney was used to confine and direct cigarette smoke to an impaction trap followed by 3 MCE (mixed cellulose ester) filters for smoke collection. The smoke condensate collected at the first two collection stages (chimney and impactor) was prepared as Triton X-100 slurry samples and the 3 MCE filters (third collection stage) used to collect smoke were microwave digested. Samples were analyzed by Thermospray Flame Furnace Atomic Absorption Spectrometry (TS-FF-AAS) for Cd and the results obtained were compared with Graphite Furnace Atomic Absorption Spectrometry (GFAAS). No significant differences were found between the values obtained with TS-FF-AAS and GFAAS at a 95% confidence level. The total concentration of Cd in the smoke of Brazilian and Paraguayan cigarettes tested ranged from 187 to 281 ng/cigarette and from 176 to 271 ng/cigarette, respectively. The LODs for Cd using TS-FF-AAS and GFAAS, were 5.8 and 1.5 ng/cigarette, respectively, for the analysis of smoke condensate from 1 cigarette. The main advantages of using the simple TS-FF-AAS system are its low running costs and the analysis time when compared to GFAAS.     

Determination of the elemental distribution in cigarette components and smoke by instrumental neutron activation analysis

Cigarette smoking is a major source of particles released in indoor environments. A comprehensive study of the elemental distribution in cigarettes and cigarette smoke has been completed. Specifically, concentrations of thirty elements have been determined for the components of 15 types of cigarettes. Components include tobacco, ash, butts, filters, and cigarette paper. In addition, particulate matter from mainstream smoke (MS) and sidestream smoke (SS) were analyzed. The technique of elemental determination used in the study is instrumental neutron activation analysis. The results show that certain heavy metals, such as As, Cd, K, Sb and Zn, are released into the MS and SS. These metals may then be part of the health risk of exposure to smoke. Other elements are retained, for the most part, in cigarette ash and butts. The elemental distribution among the cigarette components and smoke changes for different smoking conditions.     

Separation and quantitation of phenolic compounds in mainstream cigarette smoke by capillary gas chromatography with mass spectrometry in the selected-ion mode

Cigarette smoke condensate is a complex chemical matrix and determination of phenolic compounds in it frequently requires extensive and laborious sample preparation. By utilizing derivatization techniques and capillary column gas chromatography with mass spectrometry in the selected-ion mode, separation and quantitation of selected phenolic compounds found in mainstream cigarette smoke can be accomplished with minimal sample preparation. This method has been used to determine concentrations of phenol, o-cresol, m-cresol, p-cresol, catechol, resorcinol and hydroquinone in cigarette smoke condensate from a number of commercially available cigarettes and a new cigarette which heats, but does not burn, tobacco. Unlike tobacco-burning cigarettes, levels of the phenolic compounds in the new cigarette smoke are at or below the detection limits for most of the compounds. This result is attributed to the unique design of the new cigarette.     

Chemical Studies on Tobacco Smoke. LXI. Volatile Pyridines: Quantitative Analysis in Mainstream and Sidestream Smoke of Cigarettes and Cigars

Abstract

A quantitative analytical method has been developed for volatile pyridines in tobacco smoke using pyridine- ¹⁴C as an internal standard. Mainstream and sidestream smoke are trapped in 0.05 N sulfuric acid anti partitioned with chloroform. The acidic portion is then concentrated, adjusted to pH 3 and extracted with chloroform. Methanol and a trace of 2N sulfuric acid are added to this chloroform portion and the mixture is carefully concentrated.

A trace of sodium hydroxide is added and the final concentrate is analyzed by gas chromatography. Twenty-one volatile pyridines have been identified. The mainstream stroke of a popular. 85-mm U.S. cigarette without filter tip contained the following major pyridines: 33.4 μg pyridine, 12.3 μg α-picoline, 24.2 μg. β+γ-picoline, 7.6 μg 3-ethylpgridine, 5.9 μg: 4-ethylpyridine, and 23.3 μg 3,4-lutidine + 3-vinylpyridine. The sidestream smoke of this cigarette contained up to 28 times higher concentrations of pyridines.

Volatile pyridines were also determined in the mainstream smoke of other non-filter cigarettes, filter cigarettes, little cigars and, a non-tobacco cigarette. Of special interest were the much greater quantities of volatile pyridines in the mainstream and sidestream of cigars in comparison to those of cigarettes. The ratio of pyridines in sidestream to those in mainstream was 5 to 50 in large cigars. Selective filtration was observed with both cellulose acetate and charcoal filter tips. The analytical method resulted in reproducible values for pyridine, with an average recovery rate of more than 90%. In addition to pyridines, two pyrazines were also isolated from the smoke. Processed tobacco contained minute amounts of some volatile pyridines.     

沸石在去除卷烟烟气中亚硝胺的应用

吸烟污染;沸石;添加剂;沸石在去除卷烟烟气中亚硝胺的应用     

Analysis of aromatic amines in cigarette smoke

A method for the analysis of o-toluidine, o-anisidine, 2-naphthylamine, and 4-aminobiphenyl in cigarette mainstream smoke has been developed, which combines the sensitivity of their pentafluoropropionyl (PFP) derivatives in negative ion chemical ionization (NICI) mode with the selectivity of the gas chromatography/tandem mass spectrometry (GC/MS/MS) technique. The use of four deuterated analogues as internal standards along with the application of the standard addition method results in accurate and precise results; the interday precision for the aromatic amines was 3-10% and the accuracy ranged from 97-100%. This method was applied to two American-blend University of Kentucky reference cigarettes, eight American-blend market cigarettes, a bright (flue-cured) tobacco cigarette, and an electrically heated cigarette smoking system (EHCSS). For the American-blend cigarettes there was a linear correlation between aromatic amine yields and mainstream smoke 'tar' ('tar' = total particulate matter - (nicotine + water)), whereas the bright tobacco cigarette and the EHCSS demonstrated significantly lower aromatic amine yields on an equal 'tar' basis. The results support the hypothesis that the nitrogen content of the tobacco, and above all the cigarette combustion temperature, are determining factors for the yields of aromatic amines in smoke.     

卷烟烟气中挥发性组分的毛细管气相色谱分析

采用毛细管气相色谱（CGC）和色谱－质谱联用（GC－MS）技术对国内外部分名牌卷烟烟气中的挥发性和半挥发性化学成分进行了定性定量分析,质谱鉴定出107种化合物;对其中重要的32种化合物进行了定量比较,结果发现烤烟型卷烟、混合型卷烟和英式烤烟在烟气的香味组分中存在一些差异和规律,烤烟型烟气组分总含量最高,烤烟烟气中碳氢化合物裂解产物和低级酸类组分含量较高,混合型卷烟烟气中茄酮和异戊酸较高,英式烤烟的烟气组分更接近于混合型卷烟。     

Separation and quantitation of monovalent anionic and cationic species in mainstream cigarette smoke aerosols by high-performance ion chromatography

A simple method has been developed to separate and quantitate monovalent ionic species in mainstream cigarette smoke aerosols based on ion chromatography (IC) with conductivity detection. The method entails collecting the smoke aerosol particulate phase by electrostatic precipitation, dissolving the smoke condensate in methanol (MeOH), and separating the ionic species on either a cation- or anion-exchange column. The method has been applied to the analysis of smoke aerosols from two cigarettes, 1R4F Kentucky Reference cigarettes and a new cigarette that heats but does not burn tobacco. The predominant cations in smoke aerosols from 1R4F Kentucky Reference and the new cigarettes are sodium (Na+), ammonium (NH4+), and potassium (K+) ions; the predominant anions are acetate (AcO-) and formate (HCOO-). Trace amounts of chloride (Cl-), nitrite (NO2-), and nitrate (NO3-) ions are also present.     

Puff-by-puff resolved characterisation of cigarette mainstream smoke by single photon ionisation (SPI)-time-of-flight mass spectrometry (TOFMS): comparison of the 2R4F research cigarette and pure Burley, Virginia, Oriental and Maryland tobacco cigarettes

Soft single photon ionisation (SPI)-time-of-flight mass spectrometry (TOFMS) is applied for the characterisation and comparison of puff-by-puff resolved and total yields of cigarette mainstream smoke from single tobacco type cigarettes (Virginia, Oriental, Burley, and Maryland) and the 2R4F University of Kentucky research cigarette. Puff-by-puff characteristics of various smoke components within one cigarette type as well as between different cigarette types can differ tremendously. This is demonstrated by means of a few selected compounds. Puff yields vary between 15 and 106 μm for acetaldehyde, 6 and 57 μm for NO, and between 1 and 8 μm for butadiene. Thereby, cigarettes containing 100% Oriental and Burley tobacco exhibit a very unique behaviour for the first and last puff. Different cultivation and processing methods as well as burning characteristics are most likely responsible for this. Since the 2R4F cigarette contains all four tobacco types it combines features of all of them. However, for some smoke constituents, smoking of the 2R4F reference cigarette results in exceptionally high yields which might not be attributable to the four pure tobacco types, but to other factors. In addition, comparison of the different cigarettes was also carried out by normalising the yields to puff resolved particulate matter. This procedure minimises effects caused by unequal smoke formation and represents another approach in evaluating the data.     

Influence of filter ventilation on the chemical composition of cigarette mainstream smoke

Total yields of cigarette smoke constituents are greatly influenced by smoking behaviour, the tobacco blend as well as a variety of cigarette design parameters. Thereby, filter ventilation, i.e. diluting the smoke by providing a zone of microscopic holes around the circumference of the filter is one method to reduce the yield of ‘tar’ and other smoke compounds. However, little is known how these design variations influence the combustion conditions, and therefore, the overall chemical pattern of the smoke. In this paper single photon ionization-time-of-flight mass spectrometry (SPI-TOFMS) is used to characterize and compare cigarettes on a puff-by-puff basis, which differ only in filter ventilation magnitude. The research cigarettes investigated were made from Virginia tobacco and featured filter ventilations of 0% (no ventilation), 35%, and 70%. The cigarettes were smoked under two different puffing regimes, one using the puffing parameters of the conventional International Organization for Standardization (ISO) smoking regime and a more intense smoking condition. Results show that every variation entails a change of the chemical pattern, whereby, in general, cigarettes with 0% filter ventilation as well as the intense smoking regime lead to a more complete combustion compared to the ISO smoking conditions and the high ventilated cigarettes. Changes in the overall patterns can also be observed during the smoking for individual puffs. Some substances dominate the first puff, some species are more pronounced in the middle puffs, whereas others are preferably formed in the last puffs. This demonstrates the high complexity of the occurring processes. Results might help to understand the formation and decomposition reactions taking place when a cigarette is smoked and offer scope for targeted reduction strategies for specific toxicants or groups of toxicants in the smoke.     

Iron pentacarbonyl detection limits in the cigarette smoke matrix using FT-IR spectroscopy

Endogenous metals present in tobacco from agricultural practices have been purported to generate metal carbonyls in cigarette smoke. Transition metal catalysts, such as iron oxide, have been investigated for the reduction of carbon monoxide (CO) in cigarette smoke. These studies motivated the development of an analytical method to determine if iron pentacarbonyl [Fe(CO)(5)] is present in mainstream smoke from cigarette models having cigarette paper made with iron oxide. An FT-IR puff-by-puff method was developed and the detection limit was determined using two primary reference spectra from different sources to estimate the amount of Fe(CO)(5) present in a high-pressure steel cylinder of CO. We do not detect Fe(CO)(5) in a single 35 mL puff from reference cigarettes or from those cigarette models having cigarette paper made with iron oxide, with a 30-ppbV limit of detection (LOD). Also, it was shown that a filter containing activated carbon would remove Fe(CO)(5).     

Analysis of cigarette mainstream smoke for 1,1-dimethylhydrazine and vinyl acetate by gas chromatography-mass spectrometry

1,1-Dimethylhydrazine, also known as unsymdimethylhydrazine (UDMH) and vinyl acetate (VA), are both classified by the International Agency for Research on Cancer as 2B carcinogens (possibly carcinogenic to humans) and listed as cigarette smoke constituents; however, there is little or no quantitative data available on them. For UDMH in cigarette smoke, neither a yield nor a method has been published. For VA, the most recent information on yields dates back to 1965. To bridge this gap, we have developed new gas chromatographic-mass spectrometric methods for both compounds to determine their yields in cigarette smoke. UDMH is determined by derivatization with 2-nitrobenzaldehyde in methanol and is not found in cigarette smoke at levels above the detection limit of 19 ng/cig. In further experiments, when UDMH is added to the smoke stream or air stream of lit or unlit cigarettes, the derivative 2-nitrobenzaldehyde-2,2-dimethylhydrazone is found only in the air stream of the unlit cigarettes. From this, we conclude that UDMH is either not formed during smoking at all or, if it is, it reacts immediately and quantitatively with other smoke constituents (e.g., aldehydes) and is therefore not detectable in cigarette smoke. VA is determined by trapping in acetone at -78 degrees C and is found at a concentration of 270 ng/cig for a standard reference cigarette with a cellulose acetate filter (the reference cigarette 1 R4F). In the literature, VA is reported at concentrations of 1.6 microg/cig for a cigarette with a cellulose acetate/charcoal filter and 4 microg/cig for a cigarette with a cellulose acetate filter and for an unfiltered cigarette.     

卷烟主流烟气中氨的捕集及其离子色谱法测定

设计了高效的烟气捕集装置,建立了一种稀硫酸吸收、离子色谱法测定的卷烟主流烟气中氨的分析新方法.与早期的比色法、容量法、氨电极法、气相色谱法相比,该方法快速、简便,不需要复杂的样品前处理,完成一次分析只需12 min.检出限为0.005 mg/L,RSD为3.7%,空白加标回收率在87%～102%之间,吸烟加标回收率在98%～106%之间.测定了国内50种主要品牌卷烟,其主流烟气中氨含量范围为6.50～14.22μg/支烟.     

香烟烟雾中自由基的检测

对香烟焦油中的Q/H2Q自由基及气相中的自由基进行了测定，同时对香烟燃烧产生自由基的机理进行了探讨。     

离子色谱法及聚类分析研究主流烟气中的有机酸

建立了超声辅助萃取-离子色谱法同时测定卷烟主流烟气中主要有机酸的方法.采用20 mL 30 mmol/L J NaOH溶液在50℃下对捕集了卷烟主流烟气的剑桥滤片超声萃取50 min,AS11-HC分离柱、Ion AG11-HC保护柱、ASRS-ULTRAⅡ抑制器,KOH溶液为淋洗液,用电导检测器同时测定了卷烟主流烟气中的乳酸、甲酸、乙酸、丙酸、苹果酸和草酸的含量.方法的线性范围1.0～400 mg/L,相关系数为0.9990～0.9995,相对标准偏差1.4%～4.8%,检出限0.03～0.09 mg/L,回收率为92%～104%.采用此方法测定了19种不同规格卷烟样品主流烟气中6种有机酸的含量,并且以6种有机酸为指标对样品进行了聚类分析.结果表明,6种有机酸的含量分布特征可反映不同等级卷烟产品的特性,可用于不用等级卷烟产品的比较和分类.