Intra-puff CO and CO2 measurements of cigarettes with iron oxide cigarette paper using quantum cascade laser spectroscopy

The objective of this research was to apply Fourier transform infrared spectroscopy (FTIR) and tunable infrared laser differential absorption spectroscopy (TILDAS) for measuring selected gaseous constituents in mainstream (MS) and sidestream (SS) smoke for experimental cigarettes designed to reduce MS CO using iron oxide cigarette papers. These two complimentary analytical techniques are well suited for providing per puff smoke deliveries and intra-puff evolution profiles in cigarette smoke respectively. The quad quantum cascade (QC) laser high resolution infrared spectroscopy system has the necessary temporal and spectral resolution and whole smoke analysis capabilities to provide detailed information for CO and CO(2) as they are being formed in both MS and SS smoke. The QC laser system has an optimal data rate of 20 Hz and a unique puffing system, with a square wave shaped puff, that allows whole smoke to enter an 18 m, 0.3 L multi-pass gas cell in real time (0.1s cell response time) requiring no syringe or Cambridge filter pad. Another similar multi-pass gas cell with a 36 m pathlength simultaneously monitors the sidestream cigarette smoke. The smoke from experimental cigarettes manufactured with two types of iron oxide papers were compared to the smoke from cigarettes manufactured similarly without iron oxide in the paper using both instrument systems. The delivery per puff determined by the QC laser method agreed with FTIR results. MS CO intra-puff evolution profiles for iron oxide prototype cigarettes demonstrated CO reduction when compared to cigarettes without iron oxide paper. Additionally, both CO and CO(2) intra-puff evolution profiles of the cigarettes with iron oxide paper showed a significant reduction at the initial portion of the 2 s puff not observed in the non-iron oxide prototype cigarettes. This effect also was observed for ammonia and ethylene, suggesting that physical parameters such as paper porosity and burn rate are important. The SS CO and CO(2) deliveries for the experimental cigarettes evaluated remained unaffected. The iron oxide paper technology remains under development and continues to be evaluated.     

IR laser photodeposition of a-Fe/Si films developing nanograins of ferrisilicate, iron disilicide and rare hexagonal iron upon annealing

IR laser-induced gas-phase photolysis of Fe(CO)(5)-SiH(4) mixtures occurs as SiH(4)-photosensitized decomposition of Fe(CO)(5) is accelerated by products of this decomposition and it results in deposition of amorphous Si/Fe nanocomposite films. Analyses of the deposited and subsequently annealed solid films were made by FTIR, Raman and X-ray photoelectron spectroscopy, X-ray diffraction and electron microscopy. The deposited films are amorphous, contain crystalline nanostructures of iron silicide FeSi(2) and undergo atmospheric oxidation in topmost layers to iron oxide and hydrogenated silicon oxide. Upon annealing they develop nanocrystalline structures of ferrisilicate, Fe(1.6)SiO(4), carbon-encaged iron disilicide, FeSi(2), and very rare hexagonal (high-pressure) Fe surviving at ambient conditions. The mechanism of formation of these nanostructures is discussed in terms of gas-phase and solid-phase reactions.     

Hydrazine detection limits in the cigarette smoke matrix using infrared tunable diode laser absorption spectroscopy

Infrared absorption lines of hydrazine are broad and typically not baseline resolved, with line strengths approximately 100 times weaker than the more widely studied compound ammonia. Hardware and software improvements have been made to a two-color infrared tunable diode laser (IR-TDL) spectrometer in order to improve the limit of detection (LOD) of hydrazine (N2H4) in the cigarette smoke matrix. The detection limit in the smoke matrix was improved from 25 parts-per-million-by-volume (ppmv) to 4.2 ppmv using a 100 m pathlength cell with acquisition of background spectra immediately prior to each sample and 100 ms temporal resolution. This study did not detect hydrazine in cigarette smoke in the 964.4-964.9 cm(-1) spectral region, after mathematically subtracting the spectral contributions of ethylene, ammonia, carbon dioxide, methanol, acrolein, and acetaldehyde. These compounds are found in cigarette smoke and absorb in this spectral region. The LOD is limited by remaining spectral structure from unidentified smoke species. The pseudo random noise (root mean square) in the improved instrument was 2 x 10(-4) absorbance units (base e) which is equivalent to a 0.09 ppmv hydrazine gas sample in the multipass cell. This would correspond to a detection limit of 0.44 ppmv of hydrazine, given the dilution of the smoke by a factor of 5 by the sampling system. This is a factor of 10 less than the 4.2 ppmv detection limit for hydrazine in the smoke matrix, and indicates that the detection limit is primarily a result of the complexity of the matrix rather than the random noise of the TDL instrument.     

Synthesis and characterization of diiron dithiolate complexes containing a quinoxaline bridge

A potential model complex for the hydrogenase active site, [Fe(2){(μ-CH(2)S)(2)R}(CO)(6)] (1) (R = quinoxaline), was synthesized by condensation of [(μ-LiS)(2)Fe(2)(CO)(6)] with 2,3-bis(bromomethyl)quinoxaline. Reactions of 1 with bis(diphenylphosphino)methane (dppm) under a range of conditions yielded substituted complexes [Fe(2){(μ-CH(2)S)(2)R}(CO)(5)(dppm)] (2), [Fe(2){(μ-CH(2)S)(2)R}(CO)(4)(k(2)-dppm)] (3) and [Fe(2){(μ-CH(2)S)(2)R}(CO)(4)(μ-dppm)] (4). X-ray crystallography confirms that in 2, the dppm is terminally bonded to an iron atom via one phosphorus atom, whereas in 3, it acts as a chelating ligand to coordinate to an iron center in a dibasal-substituted manner. In 4, the dppm bridges the two iron atoms in a cis basal/basal fashion with one phosphorus bonded to each iron atom. Treatment of 1 with various tertiary phosphines at room temperature in acetonitrile (MeCN) generates a range of mono-substituted products [Fe(2){(μ-CH(2)S)(2)R}(CO)(5)L] (5, L = PEt(3); 6, PMe(3); 7, PPh(3); 8, Me(2)PPh). With Bu(t)NC, mono- and di-substituted [Fe(2){(μ-CH(2)S)(2)R}(CO)(5)(Bu(t)NC)] (9) and [Fe(2){(μ-CH(2)S)(2)R}(CO)(4)(Bu(t)NC)(2)] (10) complexes are generated. All the complexes were characterized by elemental analysis, IR, MS and NMR spectroscopy. IR and NMR spectroscopic studies suggest that addition of excess HBF(4)·OEt(2) acid to 1-4 led to the protonation of quinoxaline nitrogen atoms. In contrast, 5-10 were not stable in acidic media. Electrochemistry of 1-4 was investigated in the acetonitrile medium (0.1 M Bu(4)NPF(6)). The electrochemical instability of the reduced ligand, quinoxaline, and the reduced forms of these complexes revealed from the electrochemical studies suggests that they do not provide ideal models of the hydrogenase active site.     

Binding and photodissociation of CO in iron(II) complexes for application in positron emission tomography (PET) radiolabelling

(R-DAB)FeI(2) complexes containing bidentate diimide ligands (R-DAB = RN=CH-CH=NR; R = (i)Pr, c-C(6)H(11)) have been investigated for their ability to react with carbon monoxide to form iron(II) dicarbonyl complexes, (R-DAB)FeI(2)(CO)(2). Solution IR spectroscopy revealed two νCO stretches between 2000 and 2040 cm(-1) corresponding to a cis-arrangement of the carbonyl ligands around the iron. Photochemical decarbonylation was achieved by UV irradiation (365 nm), which occurred within 5 min as evidenced by solution IR spectroscopy. (c-C(6)H(11)-DAB)FeI(2) has been characterised by X-ray crystallography. Reactions using (11)C-labelled carbon monoxide were investigated and revealed that both (R-DAB)FeI(2) species were not effective as trapping complexes due to the low concentrations of [(11)C]CO used in these experiments. A Fe(TPP)(THF)(x) (TPP = tetraphenylporphyrin) complex was investigated with unlabelled CO and the monocarbonyl adduct Fe(TPP)(THF)CO was formed in situ as identified by IR spectroscopy (νCO = 1966 cm(-1)) yet was stable to CO loss upon UV irradiation. Carbonylation reactions of in situ-generated Fe(TPP)(THF)(x) using [(11)C]CO revealed that 97% of the [(11)C]CO stream could be trapped in one pass of the gas at room temperature and at atmospheric pressure.     

Zinc-rich compounds of iron and cobalt: formation of [Fe2Zn(n)] (n = 2-4) and [Co2Zn3] cores

The reactions of heteroleptic GaCp*/CO containing transition metal complexes of iron and cobalt, namely [(CO)(3)M(μ(2)-GaCp*)(m)M(CO)(3)] (Cp* = pentamethylcyclopentadienyl; M = Fe, m = 3; M = Co, m = 2) and [Fe(CO)(4)(GaCp*)], with ZnMe(2) in toluene and the presence of a coordinating co-solvent were investigated. The reaction of the iron complex [Fe(CO)(4)(GaCp*)] with ZnMe(2) in presence of tetrahydrofurane (thf) leads to the dimeric compound [(CO)(4)Fe{μ(2)-Zn(thf)(2)}(2)Fe(CO)(4)] (1). Reaction of [(CO)(3)Fe(μ(2)-GaCp*(3))Fe(CO)(3)] with ZnMe(2) and stoichiometric amounts of thf leads to the formation of [(CO)(3)Fe{μ(2)-Zn(thf)(2)}(2)(μ(2)-ZnMe)(2)Fe(CO)(3)] (2) containing {Zn(thf)(2)} as well as ZnMe ligands. Using pyridine (py) instead of thf leads to [(CO)(3)Fe{μ(2)-Zn(py)(2)}(3)Fe(CO)(3)] (3) via replacement of all GaCp* ligands by three{Zn(py)(2)} groups. In contrast, reaction of [(CO)(3)Co(μ(2)-GaCp*)(2)Co(CO)(3)] with ZnMe(2) in the presence of py or thf leads in both cases to the formation of [(CO)(3)Co{μ(2)-ZnL(2)}(μ(2)-ZnCp*)(2)Co(CO)(3)] (L = py (4), thf (5)) via replacement of GaCp* with {Zn(L)(2)} units as well as Cp* transfer from the gallium to the zinc centre. All compounds were characterised by NMR spectroscopy, IR spectroscopy, single crystal X-ray diffraction and elemental analysis.     

One-step synthesis of core(Cr)/shell(gamma-Fe(2)O(3)) nanoparticles

Core(Cr)/shell(gamma-Fe(2)O(3)) nanoparticles were synthesized by mixing Fe(CO)(5) and Cr(CO)(6) in the 9:1 ratio. These particles exhibit narrow size distribution with 13.5 nm as mean diameter and uniform spherical shape. The TEM image, which is in good agreement with the synchrotron powder XRD pattern, reveals the heterogeneous nature (core/shell structure). The analysis of the pattern reveals gamma-Fe(2)O(3) structure and a metal crystal structure. Mossbauer spectra, which support the superparamagnetic behavior determined by H-M measurement, do not show any traceable amount of Fe(0). This suggests that the metal component is Cr. EELS analysis and iron mapping suggest controlled stoichiometry and also confirm a core made of Cr and a shell made of gamma-Fe(2)O(3).     

Quad quantum cascade laser spectrometer with dual gas cells for the simultaneous analysis of mainstream and sidestream cigarette smoke

A compact, fast response, infrared spectrometer using four pulsed quantum cascade (QC) lasers has been applied to the analysis of gases in mainstream (MS) and sidestream (SS) cigarette smoke. QC lasers have many advantages over the traditional lead-salt tunable diode lasers, including near room temperature operation with thermoelectric cooling and single mode operation with improved long-term stability. The new instrument uses two 36 m, 0.3 l multiple pass absorption gas cells to obtain a time response of 0.1s for the MS smoke system and 0.4s for the SS smoke system. The concentrations of ammonia, ethylene, nitric oxide, and carbon dioxide for three different reference cigarettes were measured simultaneously in MS and SS smoke. A data rate of 20Hz provides sufficient resolution to determine the concentration profiles during each 2s puff in the MS smoke. Concentration profiles before, during and after the puffs also have been observed for these smoke constituents in SS smoke. Also, simultaneous measurements of CO(2) from a non-dispersive infrared (NDIR) analyzer are obtained for both MS and SS smoke. In addition, during this work, nitrous oxide was detected in both the MS and SS smoke for all reference cigarettes studied.     

Infrared study of the influence of reducible iron(III) metal sites on the adsorption of CO, CO2, propane, propene and propyne in the mesoporous metal-organic framework MIL-100

The present study illustrates the importance of the oxidation state of iron within the mesoporous iron trimesate [{Fe(3)O(H(2)O)(2)F(0.81)(OH)(0.19)}{C(6)H(3)(CO(2))(3)}(2)] denoted MIL-100(Fe) (MIL= Material from Institut Lavoisier) during adsorption of molecules that can interact with the accessible metal sites through π-back donation. Adsorption of CO has been first followed by FTIR spectroscopy to quantify the Lewis acid sites in the dehydrated Fe(III) sample, outgassed at 150 °C, and on the partially reduced Fe(II/III), outgassed at 250 °C. The exposure of MIL-100(Fe) to CO(2), propane, propene and propyne has then been studied by FTIR spectroscopy and microcalorimetry. It appears that π-back donating molecules are strongly adsorbed on reduced iron(II) sites despite the weaker Lewis acidity of cus Fe(2+) sites compared to that of Fe(3+) ones, as shown by pyridine adsorption.     

Energy analysis of metal-ligand bonding in transition metal complexes with terminal group-13 diyl ligands (CO)(4)Fe-ER, Fe(EMe)(5) and Ni(EMe)(4) (E = B-Tl; R = Cp, N(SiH(3))(2), Ph, Me) reveals significant pi bonding in homoleptical molecules.

The metal-ligand bonds of the title compounds have been investigated with the help of an energy partitioning analysis at the DFT level. It was found that the attractive orbital interactions between Fe and ER in (CO)(4)Fe-ER arise mainly from Fe <-- ER sigma donation. Only the boron diyl complexes (CO)(4)Fe-BR have significant contributions by Fe --> ER pi back-donation, but the Fe <-- BR sigma-donation remains the dominant orbital interaction term. The relative contributions of Fe-ER sigma donation and pi back-donation are only slightly altered when R changes from a good pi donor to a poor pi donor. Electrostatic forces between the metal fragment and the diyl ligand are always attractive, and they are very strong. They arise from the attraction between the local negative charge concentration at the overall positively charged donor atom E of the Lewis base ER and the positive charge of the iron nucleus. Electrostatic interactions and covalent interactions in (CO)(4)Fe-ER complexes have a similar strength when E is Al--Tl and when R is a good pi donor substituent. The Fe-BR bonds of the boron carbonyldiyl complexes have a significantly higher ionic character than the heavier group-13 analogues. Weak pi donor substituents R enhance the ionic character of the (CO)(4)Fe-ER bond. The metal-ligand bonds in the homoleptic complexes Fe(EMe)(5) and Ni(EMe)(4) have a higher ionic character than in (CO)(4)Fe-ER. The contribution of the TM --> ER pi back-donation to the Delta E(orb) term becomes clearly higher and contributes significantly to the total orbital interactions in the homoleptic complexes where no other pi acceptor ligands are present. The ligand BMe is nearly as strong a pi acceptor in Fe(BMe)(5) as CO is in Fe(CO)(5).     

Oxidation and reduction of bis(imino)pyridine iron dicarbonyl complexes

The oxidation and reduction of a redox-active aryl-substituted bis(imino)pyridine iron dicarbonyl has been explored to determine whether electron-transfer events are ligand- or metal-based or a combination of both. A series of bis(imino)pyridine iron dicarbonyl compounds, [((iPr)PDI)Fe(CO)(2)](-), ((iPr)PDI)Fe(CO)(2), and [((iPr)PDI)Fe(CO)(2)](+) [(iPr)PDI = 2,6-(2,6-(i)Pr(2)C(6)H(3)N═CMe)(2)C(5)H(3)N], which differ by three oxidation states, were prepared and the electronic structures evaluated using a combination of spectroscopic techniques and, in two cases, [((iPr)PDI)Fe(CO)(2)](+) and [((iPr)PDI)Fe(CO)(2)], metrical parameters from X-ray diffraction. The data establish that the cationic iron dicarbonyl complex is best described as a low-spin iron(I) compound (S(Fe) = ?) with a neutral bis(imino)pyridine chelate. The anionic iron dicarbonyl, [((iPr)PDI)Fe(CO)(2)](-), is also best described as an iron(I) compound but with a two-electron-reduced bis(imino)pyridine. The covalency of the neutral compound, ((iPr)PDI)Fe(CO)(2), suggests that both the oxidative and reductive events are not ligand- or metal-localized but a result of the cooperativity of both entities.     

Heterometallic derivatives of [Fe2Cp2(μ-PCy)(μ-CO)(CO)2]: rational synthesis of polynuclear complexes from neutral precursors having pyramidal-phosphinidene bridges

The title complex (Cp = η(5)-C(5)H(5)) reacted with the labile carbonyl complexes [M(CO)(5)(THF)] (M = Cr, Mo, W) and [MnCp'(CO)(2)(THF)] (Cp' = η(5)-C(5)H(4)Me) to give phosphinidene-bridged trimetallic compounds of formula [Fe(2)MCp(2)(μ(3)-PCy)(μ-CO)(CO)(7)] (Cr-P = 2.479(1) ?) and [Fe(2)MnCp(2)Cp'(μ(3)-PCy)(μ-CO)(CO)(4)], respectively, after formation of a new M-P bond in each case, and related heterometallic complexes [Fe(2)MClCp(2)(μ(3)-PCy)(μ-CO)(CO)(2)] (M = Cu, Au; Au-P = 2.262(1) ?) were cleanly formed upon reaction with CuCl or the labile tetrahydrothiophene (THT) complex [AuCl(THT)]. The reaction with [Fe(2)(CO)(9)] proceeded analogously to give the triiron derivative [Fe(3)Cp(2)(μ(3)-PCy)(μ-CO)(CO)(6)] in high yield (new Fe-P bond =2.318(1) ?), along with a small amount of the pentanuclear compound [{Fe(CO)(3)}{(μ(3)-PCy)Fe(2)Cp(2)(μ-CO)(CO)(2)}(2)], the latter displaying a central Fe(CO)(3)P(2) core with a distorted bipyramidal geometry (P-Fe-P = 164.2(1)°). In contrast, the reaction with [Co(2)(CO)(8)] resulted in a full disproportionation process to give the salt [{Co(CO)(3)}{(μ(3)-PCy)Fe(2)Cp(2)(μ-CO)(CO)(2)}(2)][Co(CO)(4)], having a pentanuclear Fe(4)Co cation comparable to the above Fe(5) complex (P-Co-P = 165.3(2)°). The attempted photochemical decarbonylation of the above trinuclear complexes gave results strongly dependent on the added metal fragment. Thus, the irradiation with visible or visible-UV light of the new Fe(3) and Fe(2)Cr species caused no decarbonylation but a tautomerization of the metal framework to give the corresponding isomers [Fe(2)MCp(2)(μ(3)-PCy)(μ-CO)(CO)(n)] now exhibiting a dangling FeCp(CO)(2) moiety (M = Cr, n = 7, Cr-Fe = 2.7370(3) ?; M = Fe, n = 6, new Fe-Fe bond = 2.6092(9) ?) as a result of the cleavage of the Fe-Fe bond in the precursor and subsequent formation of a new M-Fe bond. These processes are reversible, since the new isomers gave back the starting complexes under low (Cr) or moderate (Fe) thermal activation. In contrast, the manganese-diiron complex [Fe(2)MnCp(2)Cp'(μ(3)-PCy)(μ-CO)(CO)(4)] could be decarbonylated stepwise, to give first the tetracarbonyl complex [Fe(2)MnCp(2)Cp'(μ(3)-PCy)(μ-CO)(2)(CO)(2)] and then the tricarbonyl cluster [Fe(2)MnCp(2)Cp'(μ(3)-PCy)(μ-CO)(3)], the latter having a closed triangular metal core (Fe-Fe = 2.568(7) ?; Mn-Fe = 2.684(8) and 2.66(1) ?).     

Iron pentacarbonyl determination in carbon monoxide

Iron pentacarbonyl, Fe(CO)₅, was previously employed to calibrate the sealed inductively coupled plasma (SICP) for Fe in a 50% chlorine discharge. The same technique is used to determine Fe as Fe(CO)₅, one of the most important metallic compound impurities present, in carbon monoxide cylinders. Iron concentrations in various CO cylinders were determined directly by SICP in 30% (v/v) CO. Operating parameters including incident power and maximum tolerable CO and Cl₂ concentrations in the discharge were optimized. The detection limit for Fe(CO)₅ in CO was 0.18 μl l⁻¹ (172 ng absolute). Statistically similar results were obtained when Fe(CO)₅ content was determined by FTIR and SICP-AES. Two- and sevenfold increases in Fe(CO)₅ concentrations were observed over a 1-year period in two different carbon steel cylinders containing CO.     

Versatile behavior of the fluorophosphinidene ligand in iron carbonyl chemistry

Fluorophosphinidene (PF) is a versatile ligand found experimentally in the transient species M(CO)(5)(PF) (M = Cr, Mo) as well as the stable cluster Ru(5)(CO)(15)(μ(4)-PF). The PF ligand can function as either a bent two-electron donor or a linear four-electron donor with the former being more common. The mononuclear tetracarbonyl Fe(PF)(CO)(4) is predicted to have a trigonal bipyramidal structure analogous to Fe(CO)(5) but with a bent PF ligand replacing one of the equatorial CO groups. The tricarbonyl Fe(PF)(CO)(3) is predicted to have two low-energy singlet structures, namely, one with a bent PF ligand and a 16-electron iron configuration and the other with a linear PF ligand and the favored 18-electron iron configuration. Low-energy structures of the dicarbonyl Fe(PF)(CO)(2) have bent PF ligands and triplet spin multiplicities. The lowest energy structures of the binuclear Fe(2)(PF)(CO)(8) and Fe(2)(PF)(2)(CO)(7) derivatives are triply bridged structures analogous to the experimental structure of the analogous Fe(2)(CO)(9). The three bridges in each Fe(2)(PF)(CO)(8) and Fe(2)(PF)(2)(CO)(7) structure include all of the PF ligands. Other types of low-energy Fe(2)(PF)(2)(CO)(7) structures include the phosphorus-bridging carbonyl structure (FP)(2)COFe(2)(CO)(6), lying only ~2 kcal/mol above the global minimum, as well as an Fe(2)(CO)(7)(μ-P(2)F(2)) structure in which the two PF groups have coupled to form a difluorodiphosphene ligand unsymmetrically bridging the central Fe(2) unit.     

In situ surface-enhanced IR absorption spectroscopy on CO adducts of iron protoporphyrin IX self-assembled on a Au electrode

The surface coordination chemistry of carbon monoxide with the reduced form (Fe(II)PP) of iron(III) protoporphyrin IX (Fe(III)PP) monolayer self-assembled on a Au electrode in 0.1 M HClO4 was studied for the first time by using in situ ATR-surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS). Both mono- and biscarbonyl adducts [simplified as Fe(II)(CO)PP and Fe(II)(CO)2PP, respectively] were detected, depending on the history of potential control. Initially, the Fe(II)(CO)PP predominates, and the intermediate transition potential for the conversion of Fe(II)(CO)PP to Fe(III)PP and CO was spectrally determined to be ca. 0.09 V (vs SCE). The ratio of Fe(II)(CO)2PP and Fe(II)(CO)PP increases after a potential excursion to a sufficiently positive value. Fe(II)(CO)2PP is much more stable against its electro-oxidation to Fe(III)PP than its counterpart Fe(II)(CO)PP with increasing potential. The observed change of coordination properties may be ascribed to an irreversible structural reorganization of the FePP adlayer caused by the potential excursion.     

The influence of trace water concentration on iron oxide nanoparticle size

The size of iron oxide nanoparticles, prepared from the thermal decomposition of Fe(CO)(5) in a high boiling solvent in the presence of oleic acid, is affected by water concentration, giving particles from sizes of 5.6 nm to as low as 2.2 nm.     

Six-coordinate and five-coordinate Fe(II)(CN)(2)(CO)(x) thiolate complexes (x = 1, 2): synthetic advances for iron sites of [NiFe] hydrogenases

The dicyanodicarbonyliron(II) thiolate complexes trans,cis-[(CN)(2)(CO)(2)Fe(S,S-C-R)](-) (R = OEt (2), N(Et)(2) (3)) were prepared by the reaction of [Na][S-C(S)-R] and [Fe(CN)(2)(CO)(3)(Br)](-) (1). Complex 1 was obtained from oxidative addition of cyanogen bromide to [Fe(CN)(CO)(4)](-). In a similar fashion, reaction of complex 1 with [Na][S,O-C(5)H(4)N], and [Na][S,N-C(5)H(4)] produced the six-coordinate trans,cis-[(CN)(2)(CO)(2)Fe(S,O-C(5)H(4)N)](-) (6) and trans,cis-[(CN)(2)(CO)(2)Fe(S,N-C(5)H(4))](-) (7) individually. Photolysis of tetrahydrofuran (THF) solution of complexes 2, 3, and 7 under CO led to formation of the coordinatively unsaturated iron(II) dicyanocarbonyl thiolate compounds [(CN)(2)(CO)Fe(S,S-C-R)](-) (R = OEt (4), N(Et)(2) (5)) and [(CN)(2)(CO)Fe(S,N-C(5)H(4))](-) (8), respectively. The IR v(CN) stretching frequencies and patterns of complexes 4, 5, and 8 have unambiguously identified two CN(-) ligands occupying cis positions. In addition, density functional theory calculations suggest that the architecture of five-coordinate complexes 4, 5, and 8 with a vacant site trans to the CO ligand and two CN(-) ligands occupying cis positions serves as a conformational preference. Complexes 2, 3, and 7 were reobtained when the THF solution of complexes 4, 5, and 8 were exposed to CO atmosphere at 25 degrees C individually. Obviously, CO ligand can be reversibly bound to the Fe(II) site in these model compounds. Isotopic shift experiments demonstrated the lability of carbonyl ligands of complexes 2, 3, 4, 5, 7, and 8. Complexes [(CN)(2)(CO)Fe(S,S-C-R)](-) and NiA/NiC states [NiFe] hydrogenases from D. gigas exhibit a similar one-band pattern in the v(CO) region and two-band pattern in the v(CN) region individually, but in different positions, which may be accounted for by the distinct electronic effects between [S,S-C-R](-) and cysteine ligands. Also, the facile formations of five-coordinate complexes 4, 5, and 8 imply that the strong sigma-donor, weak pi-acceptor CN(-) ligands play a key role in creating/stabilizing five-coordinate iron(II) [(CN)(2)(CO)Fe(S,S-C-R)](-) complexes with a vacant coordination site trans to the CO ligand.     

Trifluorosulfane ligand as an analogue of the nitrosyl ligand: highly exothermic fluorine transfer reactions from sulfur to metal in the chemistry of SF3 metal carbonyls of the first row transition metals

The variety of known very stable PF(3) metal derivatives analogous to metal carbonyls suggests the synthesis of SF(3) metal derivatives analogous to metal nitrosyls. However, the only known SF(3) metal complex is the structurally uncharacterized (Et(3)P)(2)Ir(CO)(Cl)(F)(SF(3)) synthesized by Cockman, Ebsworth, and Holloway in 1987 and suggested by electron counting to have a one-electron donor SF(3) group rather than a three-electron donor SF(3) group. In this connection, the possibility of synthesizing SF(3) metal derivatives analogous to metal nitrosyls has been investigated using density functional theory. The [M]SF(3) derivatives with [M] = V(CO)(5), Mn(CO)(4), Co(CO)(3), Ir(CO)(3), (C(5)H(5))Cr(CO)(2), (C(5)H(5))Fe(CO), and (C(5)H(5))Ni analogous to known metal nitrosyl derivatives are all predicted to be thermodynamically disfavored with respect to the corresponding [M](SF(2))(F) derivatives by energies ranging from 19.5 kcal/mol for Mn(SF(3))(CO)(4) to 5.4 kcal/mol for Co(SF(3))(CO)(3). By contrast, the isoelectronic [M]PF(3) derivatives with [M] = Cr(CO)(5), Fe(CO)(4), Ni(CO)(3), (C(5)H(5))Mn(CO)(2), (C(5)H(5))Co(CO), and (C(5)H(5))Cu are all very strongly thermodynamically favored with respect to the corresponding [M](PF(2))(F) derivatives by energies ranging from 64.3 kcal/mol for Cr(PF(3))(CO)(5) to 31.6 kcal/mol for (C(5)H(5))Co(PF(3))(CO). The known six-coordinate (Et(3)P)(2)Ir(CO)(Cl)(F)(SF(3)) is also predicted to be stable relative to the seven-coordinate (Et(3)P)(2)Ir(CO)(Cl)(F)(2)(SF(2)). Most of the metal SF(3) complexes found in this work are singlet structures containing three-electron donor SF(3) ligands with tetrahedral sulfur coordination. However, two examples of triplet spin state metal SF(3) complexes, namely, the lowest energy (C(5)H(5))Fe(SF(3))(CO) structure and a higher energy Co(SF(3))(CO)(3) structure, are found containing one-electron donor SF(3) ligands with pseudo square pyramidal sulfur coordination with a stereochemically active lone electron pair.     

Dinuclear iron(II)-cyanocarbonyl complexes linked by two/three bridging ethylthiolates: relevance to the active site of [Fe] hydrogenases

Dinuclear iron(II)-cyanocarbonyl complex [PPN](2)[Fe(CN)(2)(CO)(2)(mu-SEt)](2) (1) was prepared by the reaction of [PPN][FeBr(CN)(2)(CO)(3)] and [Na][SEt] in THF at ambient temperature. Reaction of complex 1 with [PPN][SEt] produced the triply thiolate-bridged dinuclear Fe(II) complex [PPN][(CN)(CO)(2)Fe(mu-SEt)(3)Fe(CO)(2)(CN)] (2) with the torsion angle of two CN(-) groups (C(5)N(2) and C(3)N(1)) being 126.9 degrees. The extrusion of two sigma-donor CN(-) ligands from Fe(II)Fe(II) centers of complex 1 as a result of the reaction of complex 1 and [PPN][SEt] reflects the electron-rich character of the dinuclear iron(II) when ligated by the third bridging ethylthiolate. The Fe-S distances (2.338(2) and 2.320(3) A for complexes 1 and 2, respectively) do not change significantly, but the Fe(II)-Fe(II) distance contracts from 3.505 A in complex 1 to 3.073 A in complex 2. The considerably longer Fe(II)-Fe(II) distance of 3.073 A in complex 2, compared to the reported Fe-Fe distances of 2.6/2.62 A in DdHase and CpHase, was attributed to the presence of the third bridging ethylthiolate, instead of pi-accepting CO-bridged ligand as observed in [Fe] hydrogenases. Additionally, in a compound of unusual composition ([Na.(5)/(2)H(2)O][(CN)(CO)(2)Fe(mu-SEt)(3)Fe(CO)(2)(CN)])(n)((1)/(2)O(Et)(2))(n) (3), the Na(+) cations and H(2)O molecules combining with dinuclear [(CN)(CO)(2)Fe(mu-SEt)(3)Fe(CO)(2)(CN)](-) anions create a polymeric framework wherein two CN(-) ligands are coordinated via CN(-)-Na(+)/CN(-)-(Na(+))(2) linkages, respectively.     

ESI-MS quantitation of iron as its 4-(2-pyridylazo)resorcinol (PAR) complex: application to pharmaceutical tablets containing iron oxide pigment

Quantitation of iron oxide (Fe(2)O(3)) in pharmaceutical formulations using electrospray ionization mass spectrometry (ESI-MS) following iron complexation with 4-(2-pyridylazo)resorcinol (PAR) was evaluated. Complexation of Fe(III) with PAR was found to produce an intense mass spectral signal at low pH compared to the free ligand. Using the selected-ion-monitoring mode of a triple-quadrupole mass spectrometer, the signal at m/z 484 arising from the singly charged [Fe(III)(PAR)(2)](+) complex gave a limit of detection of ~2 μM for total iron. The linear range of the calibration curve was found to be 2-43 μM total iron. Trace iron interference was decreased to submicromolar levels by performing an optimized labware cleaning protocol and instrument replumbing using Polyetheretherketone (PEEK) tubing. The validation parameters of this ESI-MS total iron analysis (specificity, linearity, precision, accuracy, robustness and stability) are within the acceptance criteria listed in the validation guidelines developed by the Food and Drug Administration for industry. Recovery of 93% of the added iron indicated a satisfactory extraction procedure for tablets containing Fe(2)O(3) pigment. There was no statistical difference between the results obtained by ESI-MS and the common elemental method, inductively coupled plasma-optical emission spectroscopy. Since the proposed ESI-MS method can be performed on a mass spectrometer equipped with an ESI source, which is standard instrumentation in the pharmaceutical industry, the method validated here provides an alternate method for metal ion analysis by ESI-MS.