分子结构对6FDA型聚酰亚胺透气性能的影响

理想的气体分离膜材料应该同时具有高的透气性和良好的透气选择性、高强度、耐高温、耐化学介质和良好的成膜加工性能,聚酰亚胺是一类具有各种优良性能的气体分离膜材料,其中尤以6FDA型聚酰亚胺最引人注目,这类聚酰亚胺在保持普通聚酰亚胺高性能的基础上,改善了加工性能,它们可溶于极性非质子溶剂,可采用相转换法制成不对称膜。本文报道这类聚酰亚胺的分子结构与气体分离性能的关系。     

聚酰亚胺碳分子筛气体分离膜的研究进展

聚酰亚胺碳分子筛膜由于具有较高的热稳定性、耐化学性、气体渗透性和选择性,而受到广泛关注。根据近年来聚酰亚胺碳分子筛膜在气体分离方面的研究现状,详细介绍了填充改性、对前驱体进行预处理和聚酰亚胺单体改性的研究成果,并展望了聚酰亚胺碳分子筛分离膜的发展趋势,以期为未来高效分离膜的研发提供参考。     

四羧酸环戊烷型聚酰亚胺膜对CO_2和CH_4的透过性

四羧酸环戊烷型聚酰亚胺膜对ＣＯ２和ＣＨ４的透过性张俊彦潘光明（中国科学院兰州化学物理研究所兰州７３００００）关键词环戊烷四羧酸，聚酰亚胺，气体分离，膜理想的气体分离膜材料应具有高的透气性和良好的透气选择性，耐高低温，耐化学介质和良好的机械强度及膜加...     

联苯二酐型聚酰亚胺的透气性能与分子结构关系的研究

联苯二酐型聚酰亚胺的透气性能与分子结构关系的研究李悦生，丁孟贤，徐纪平（浙江大学高分子科学与工程研究所，杭州，３１００２７）（中国科学院长春应用化学研究所）关键词聚酰亚胺，膜，气体分离，透气性，透气选择性联苯二酐（ＢＰＤＡ）型聚酰亚胺具有较高的透气选...     

含叔丁基聚酰亚胺均质膜的气体分离性能

采用高温“一步法”缩聚合成了一系列含叔丁基的可溶性芳香聚酰亚胺树脂, 然后通过溶液浇注法制得相应均质薄膜, 并对其气体分离性能进行了测试, 同时研究了二酐结构和温度对聚酰亚胺均质膜气体分离性能的影响. 结果表明, 对于H₂, N₂, O₂, CO₂和CH₄ 等5种气体, 含叔丁基聚酰亚胺均质膜不仅表现出良好的透气性, 而且具有较高的气体透过选择性, 4,4'-(六氟异丙烯)二酞酸酐(6FDA)和均苯四甲酸二酐(PMDA)两类聚酰亚胺均质膜的气体分离性能最佳. 除CO₂外, 这两类聚酰亚胺均质膜的气体渗透系数随温度升高而升高, 而所有测试气体在这两种均质膜中的扩散系数和溶解度系数均随温度升高而增大.     

抗溶胀型聚酰亚胺气体分离膜的制备及其研究进展

膜分离技术具有绿色、高效、低能耗等特点.聚酰亚胺膜具有优异的气体分离性能及机械性能,但在分离高压天然气及生物气时,聚酰亚胺膜易被CO2溶胀塑化,导致膜的选择性下降.近年来,已经报道了多种可用于提高聚酰亚胺膜抗溶胀的技术.本文介绍了由于CO2渗透引起的聚合物膜塑化机理,并详述了热退火、热交联、化学交联、热重排、与纳米材料共混及与聚合物共混等用于抑制聚酰亚胺膜塑化的方法,提出了用于天然气及生物气分离的膜材料,未来的主要研究方向是开发同时具备高气体渗透性及高抗CO2塑化的聚酰亚胺膜材料.     

过渡金属有机络合物添加剂对聚酰亚胺气体分离膜性能的影响

采用具有庞大取代基团的过渡金属有机络合物作为添加剂制备了聚酰亚胺气体分离膜,研究了过渡金属盐、有机配体和金属络合物对聚酰亚胺均质膜和非对称膜氢、氮气体透过性能的影响,结果表明过渡金属盐添加剂提高了分离系数,但降低了气体透过速率;有机配体添加剂增大了气体透过速率却降低了分离系数;以络合物作添加剂时,可在不降低分离系数的情况下使气体透过速率得到提高,是一种改进气体分离膜性能的有效方法。     

多孔材料表面修饰聚酰亚胺非对称混合基质膜对CO2/N2和CO2/CH4的气体分离

兼具高通量和高选择性的气体分离膜是研究膜分离材料的目标.采用相转化法制备了聚酰亚胺非对称膜,并将其作为基底膜材料,分别在其表面修饰掺有金属有机框架材料Cu₃(BTC)₂ (1, 3, 5-均苯三甲酸合铜),沸石咪唑酯骨架材料ZIF-8以及镁铝水滑石MgAl-LDHs的聚酰胺酸溶液,经热亚胺化后制成非对称混合基质膜.研究了该系列非对称混合基质膜的结构特性和对CO₂、CH₄和N₂气体分离性能;考察了ZIF-8的掺杂量对非对称混合基质膜透气性能的影响.结果表明非对称聚酰亚胺膜的表面修饰可有效地改变膜的表面性质,掺杂ZIF-8的非对称混合基质膜气体的透气性能和选择性都增加,且掺杂量为5% (w)时CO₂/N₂和CO₂/CH₄的理想选择性分别高达24和83,为合成高效的CO₂分离膜提供了借鉴.     

分子结构对聚芳醚酮薄膜透气性的影响

分子结构对聚芳醚酮薄膜透气性的影响王忠刚，陈天禄，徐纪平（中国科学院长春应用化学研究所长春１３００２２）关键词聚芳醚酮，气体分离膜，结构－性能关系为了改善聚合物薄膜的透气性能，开发具有高透气性和高选择性的膜材料，人们对膜分子结构与透气性能间的关系进行...     

聚酰亚胺、聚砜、聚醚砜及其共混改性中空纤维膜用于醇/醚气相分离的研究

甲醇／ 甲基叔丁基醚的分离是目前具有实用意义的重要研究课题之一,采用气流吹扫式操作,研究了聚酰亚胺、不同结构的聚砜中空纤维膜在不同操作条件下,对甲醇／ 甲基叔丁基醚气相混合体系的分离性能,也研究共混改性对分离膜性能的影响。结果表明,各种材料的膜具有相近的分离行为,即随着气相中甲醇含量的增加,透过通量逐渐增大而分离系数逐渐减小,聚酰亚胺膜具有适中的透过通量,但具有很高的分离系数,在甲醇浓度低于２０ ％ 时,分离系数可达数千。采用聚醚砜共混改性的聚酰亚胺膜在未明显降低透过通量的条件下,使醇／ 醚分离系数大幅度提高,有很好的应用前景。     

渗透汽化分离苯—乙醇混合物

以甲基硅橡胶及甲基丙烯酸十二酯－甲基丙烯酸异丁酯的共聚物共为膜材料，以聚丙烯睛多孔膜为底膜制成复合膜，对苯－乙醇混合物进行渗透汽化分离。考察了膜材料的组成、分离温度、原料液组分等因素对膜性能的影响。     

Use of microfiltration as first step in recovery of protein a from fermentation broth

The flux and transmission of protein A during microfiltration have been studied. We studied the performance of two commercial membranes: one made of nylon (Pall Ultipore Nylon₆₆, 0.2 μm) and one of polyether sulfone (Pall Omega, 0.16 μm). The Nylon₆₆ membrane had by far the best transmission of protein A although a previous study showed that bovine serum albumin (BSA), often used to characterize membranes, had much better transmission through the Omega membrane. The membrane manufacturer also states that the Omega membrane is the best membrane for this kind of application because it is a low-protein-binding membrane. The lower transmission of the Omega membrane for protein A was assumed to be owing to its smaller pores and higher charge density in combination with the larger Stokes radius for protein A. When the pH was lowered, the Nylon₆₆ membrane still had the higher transmission. It can thus be concluded that a membrane that is found suitable for the recovery process of one protein is not always the best choice for the recovery process for other proteins even though the membrane is low protein binding.     

聚偏氟乙烯膜蒸馏技术在水处理中的应用研究进展

膜蒸馏是一种以膜为介质,利用传统蒸发工艺开发的新型膜分离技术。随着高分子材料行业的进步和制膜工艺的成熟,膜蒸馏技术取得了巨大的进展,在水处理领域拥有十分广阔的市场前景。膜蒸馏技术的核心是膜的通量和使用寿命,而性能优良的膜材料是膜蒸馏技术发展的关键。聚偏氟乙烯(PVDF)因具有成膜性能好、表面张力大、化学稳定性强等优点,在膜蒸馏技术应用研究中备受青睐。同时PVDF与其他聚合物具有良好的相容性,为膜的改性研究奠定了基础,极大地扩展了应用范围。本文介绍了膜蒸馏技术的工作原理及工艺特点以及PVDF膜材料的特点及改性方法,重点对PVDF膜蒸馏技术在水处理领域的应用进行了梳理和总结,讨论了该技术亟待研究和解决的问题,以期为该工艺技术的进一步发展提供科学支撑和理论依据。     

Preparation and characterization of polyaniline/polysulfone nanocomposite ultrafiltration membrane

Novel nanocomposite membrane was prepared through the filtration of polyaniline (PANI) nanofiber aqueous dispersion with polysulfone (PS) ultrafiltration (UF) membrane. Scanning electron microscope (SEM) images showed that PANI nanofiber layer was formed on the PS membrane surface. Atomic force microscopy (AFM) analysis indicated that the nanocomposite membrane had rougher surface than the PS substrate membrane. Compared with the PS substrate membrane, the nanocomposite membrane had much better permeability for the good hydrophilicity of PANI nanofiber layer, and had almost the same rejection performance. In addition, the nanocomposite membrane had positive surface potential under acidic condition because PANI could be protonated easily by acid. During the filtration of BSA solution, the nanocomposite membrane showed much better antifouling performance than the substrate membrane for the hydrophilicity and steric hindrance effect of its nanofiber layer. Moreover, under acidic solution condition, strong electrostatic repulsion between PANI nanofibers and BSA existed and improved membrane antifouling performance further.     

荷电膜的膜电位研究进展

膜电位的测定是表征荷电膜的传递现象的重要参数之一。本文简要介绍了膜电位理论基础,包括T. M. S.理论和不可逆热力学理论。分别阐述了关于离子交换膜、双极膜、两性膜以及复合膜的膜电位的最新进展,并提出今后的发展方向。     

THE QUANTUM EFFICIENCY FOR THE INTERPHOTOCONVERSION OF THE BLUE and PINK FORMS OF PURPLE MEMBRANE

When the cations bound to purple membrane are removed it turns blue, and when this blue membrane is irradiated its color changes to pink. Irradiation of pink membrane leads to the reformation of blue membrane. We have determined that the quantum efficiency for the formation of pink membrane from deionized blue membrane is 1.6 ± 0.6 ± 10 ⁴ at 0^oC, pH 5.0. We also found that the quantum efficiency for the back photoconversion, i.e. the formation of blue membrane from pink membrane, is 8.8 ± 1.6 ± 10^-3 at 0^oC, 55 times greater than that of the forward photoconversion reaction. The extinction coefficients of the pink membrane and blue membrane were determined to be 44 500 ± 670 cm^-1 M^-1 at 491 nm and 54 760 ± 830 cm^-1 M ^-1 at 603 nm, respectively, assuming light-adapted purple membrane is 63 000 cm^-1 M ^-1 at 568 nm. The quantum efficiency for forming pink membrane from blue membrane is much lower than that for forming the photointermediate of the blue membrane's photocycle. Their relationship is similar to that of light-adaptation and photocycle of the dark-adapted purple membrane.     

Experimental evidence to support a theory of lipid membrane fusion

Membrane fusion between two lipid membranes with different curvatures was measured by using a fluorescence fusion assay for lipid vesicle systems and was also obtained by measuring lipid monolayer surface tension upon the fusion of vesicles to monolayer membranes. For such membrane systems, it was found that when lysolipid was incorporated only in the membrane with a greater curvature, membrane fusion was more suppressed than those for the case where the same amount (molar ratio of lysolipid to non-lysolipids) of lysolipid was incorporated only in the membrane with a lower curvature. When lysolipid was incorporated only in a flat membrane (e.g., monolayer) and the fusion of small vesicles (SUV) to the monolayer was measured, suppression of membrane fusion by lysolipid was minimal. It is known that lysolipid lowers the surface energy of curved membranes, which stabilizes energetically such membrane surfaces, and thus suppresses membrane fusion. Our results support our theory of lipid membrane fusion where the membrane fusion occurs through the most curved membrane region at the contact area of two interacting membranes.     

Dynamics and instabilities of lipid bilayer membrane shapes

Biological membranes undergo constant shape remodeling involving the formation of highly curved structures. The lipid bilayer represents the fundamental architecture of the cellular membrane with its shapes determined by the Helfrich curvature bending energy. However, the dynamics of bilayer shape transitions, especially their modulation by membrane proteins, and the resulting shape instabilities, are still not well understood. Here, we review in a unifying manner several theories that describe the fluctuations (i.e. undulations) of bilayer shapes as well as their local coupling with lipid or protein density variation. The coupling between local membrane curvature and lipid density gives rise to a ‘slipping mode’ in addition to the conventional ‘bending mode’ for damping the membrane fluctuation. This leads to a number of interesting experimental phenomena regarding bilayer shape dynamics. More importantly, curvature-inducing proteins can couple with membrane shape and eventually render the membrane unstable. A criterion for membrane shape instability is derived from a linear stability analysis. The instability criterion reemphasizes the importance of membrane tension in regulating the stability and dynamics of membrane geometry. Recent progresses in understanding the role of membrane tension in regulating dynamical cellular processes are also reviewed. Protein density is emphasized as a key factor in regulating membrane shape transitions: a threshold density of curvature coupling proteins is required for inducing membrane morphology transitions.     

Directed development of high-performance membranes via high-throughput and combinatorial strategies

Combinatorial strategies are for the first time applied in membrane technology and prove to be a powerful new tool in the search for novel membrane materials. The selected system for this study is a polyimide solvent-resistant nanofiltration membrane prepared via phase inversion. The phase inversion process is a typical membrane synthesis procedure involving a large number of compositional components, which can each be varied in a wide concentration range. The optimization of the membrane dope composition was performed using evolutionary optimization via genetic algorithms. Compared with the best commercially available membranes, a substantially improved membrane performance could be realized, both on the level of membrane selectivity and on that of permeability. The miniaturized high-throughput synthesis procedure could be scaled up successfully when the polymer dope was sufficiently viscous. It can be anticipated that application of combinatorial techniques can potentially lead to major improvements in all fields of membrane technology, for example water treatment, gas separation, and dialysis, not only on the compositional level but also for instance on the level of membrane synthesis posttreatment and operational conditions.     

Fe3+对MBR减缓膜污染的研究进展

膜生物反应器(membrane bioreactor, MBR)作为一种高效的污水处理及回用工艺,比传统的活性污泥法具有更多优势。然而,膜污染问题是限制其广泛应用的关键性问题。众多研究者已证实Fe₃₊能有效的改善MBR中混合液的可滤性及减缓膜污染。本文简述了MBR污泥混合液中主要污染物—胞外聚合物(extracellular polymeric substances, EPSs),并总结Fe₃ 在去除混合液中污染物、减缓膜污染方面的效能及其对污泥混合液的影响。最后,对Fe₃ 在减缓MBR膜污染的未来研究方向进行展望。