含烯丙基席夫碱ⅣB族的金属烯烃聚合催化剂的合成、结构、高分子化及其催化乙烯聚合反应

制备出两类含烯丙基席夫碱的ⅣB族配合物[R(N=CH-C₆H₃(3-R)O)₂MCl₂ (R=Allyl；R′=Pheny；M=Ti(6)，M=Zr(7)；R=tert-Butyl；R′=Allyl；M=Ti(8)；M=Zr(9))，配合物(7)的单晶结构显示围绕中心金属的配合构型为畸变八面体，其中2个氯原子处于顺式位置。配合物(7，9)中的烯丙基与苯乙烯共聚可得到高分子化烯烃聚合催化剂(PSC1；PSC2)。在助催化剂(MMAO)存在下，配合物9和相应的高分子化催化剂(PSC2)显示出很高的催化乙烯聚合的活性。     

Valence-variable Catalysts for Redox-controlled Switchable Ring-opening Polymerization

As a representative class of sustainable polymer materials, biodegradable polymers have attracted increasing interest in recent years. Despite significant advance of related polymerization techniques, realizing high sequence-control and easy-handling in ring-opening (co)polymerizations still remains a central challenge. To this end, a promising solution is the development of valence-variable metal-based catalysts for redox-induced switchable polymerization of cyclic esters, cyclic ethers, epoxides, and CO₂. Through a valence-determined electron effect, the switch between different catalytically active states as well as dormant state contributes to convenient formation of polymer products with desired microstructures and various practical performances. This redox-controlled switchable strategy for controlled synthesis of polymers is overviewed in this Review with a focus on potential applications and challenges for further studies.     

桥联环戊二烯金刚烷氨基二甲基钛配合物的合成及其催化丙烯聚合

合成了新型限制几何构型四甲基环戊二烯金刚烷氨基二甲基钛配合物(1-Adamantyl)NSiMe₂(C₅Me₄)]TiMe₂(c)。 通过¹H NMR、元素分析以及单晶衍射分析等技术手段确定了该配合物的结构。 与其叔丁基氨配合物tBuNSiMe₂(C₅Me₄)]TiMe₂(a)对比,在修饰甲基铝氧烷(MMAO)/2,6-二叔丁基-4-甲基苯酚(BHT)活化下进行丙烯聚合,探讨了氨基配体结构及聚合条件对聚合性能的影响。 在保持准活性聚合的条件下,金刚烷胺基配合物c的催化活性为562 kg_(PP)/(mol_(Ti)·h),为叔丁胺基配合物a的2倍以上,说明金刚烷胺的引入有助于提高体系的链增长速率。     

丁二烯在稀土催化体系中的本体聚合

本工作利用一新型稀土催化剂,在实验室中通过本体聚合成功地合成出了顺式含量高达97％以上,特性粘数[η]在1,0—5,0范围内的无疑胶聚丁二烯。实验结果表明,本体聚合的某些基本规律与溶液聚合的规律一致。所不同的是,本体聚合具有较高的聚合活性,并可得到分子分量分布较窄的聚合物并且具有良好的加工性能。     

Phase-Transfer catalyzed free-radical polymerization of acrylonitrile

The kinetics of phase-transfer catalyzed free-radical polymerization of acrylonitrile (AN) was carried out with water-soluble initiator peroxomonosulphate (PMS) with phase-transfer catalysts (tetrabutylammonium chloride and benzyltributylammonium chloride (TBAC and BTBAC) in tolune/water two-phase systems in the temperature range of 45–55°C at fixed pH (4) and ionic strength. The rates of polymerization (R_p) were evaluated at various values of [PMS], [PTC], and [AN]. It has been observed that the rates of polymerization increase with an increase of [AN], [PMS], and [PTC]. A kinetic scheme has been proposed to account for the experimental observations. © 1994 John Wiley & Sons, Inc.     

Heptane-soluble homogeneous zirconocene catalyst: Synthesis of a single diastereomer,polymerization catalysis,and effect of silica supports

Bis(1-indenyl)-di[1′S, 2′R, 5′S)-methoxy]silane ( 1 ) was converted into a mixture of corresponding ansa-diastereomeric zirconocenes. Further purification afforded a single dia-stereomer, di[(1′S, 2′R, 5′S)-methoxy] silylene-bis[η⁵-1(R, R)-(+)-indenyl] dichlorozirconium ( 2 ), which is optically active and hydrocarbon soluble. Extremely rapid ethylene, propylene, and ethylene-hexene polymerizations were observed both in toluene and n-heptane solutions; for instance, at 50°C, activity for ethylene polymerization reaches ～ 1.5×10¹⁰ (g of PE/((mol of Zr) · [C₂H₄] · h). The “bare” zirconocenium ion generated from 2/TIBA/Ph₃CB(C₆F₅)₄ exhibits unusual polymerization behaviors; the polymerization activity increases monotonically with temperature of polymerization (T_p) up to a conventional polymerization condition (50–70°C), and the ¹³C NMR study shows that the isotactic poly-propylene obtained has fairly high [mmmm] methyl pentad distributions at high T_p (?25°C with [mmmm] ～ 0.93–0.75) and a perfect stereoregularity at low T_p (?0°C with [mmmm] > 0.99). The catalyst precursors 2 and Et(Ind)₂ZrCl₂ ( 3 ) supported on silica by different approaches produced poly(olefins) of different molecular weights and stereoregularities, and a methylaluminokane and Ph₃CB(C₆F₅)₄ free silica-supported zirconocene system was found to be activated by triisobutylaluminum. © 1995 John Wiley & Sons, Inc.     

烯烃配位聚合催化剂的研究进展

较全面地综述了配位聚合催化剂和聚合机理的研究进展:高效Ziegler-Natta催化剂催化丙烯、乙烯等烯烃高效聚合,可合成多种高性能聚烯烃,等规聚丙烯的等规度大于98.5%,不同结构和性能的聚乙烯包括线性低密度聚乙烯(LLDPE)、超低密度聚乙烯(VLDPE)、中密度聚乙烯(MDPE)、高密度聚乙烯(HDPE)、双/宽峰分布聚乙烯、超高分子量聚乙烯(UHMWPE)和超低密度双/宽峰分布聚乙烯等;茂金属催化剂催化苯乙烯、乙烯、丙烯、1-丁烯等烯烃的均聚合和共聚合,并概括了其聚合机理;非茂金属催化剂合成多组分、多立体结构嵌段的聚烯烃,极性聚烯烃及超支化聚烯烃等,介绍了链行走和链穿梭机理。展望了配位聚合的发展趋势,认为聚合过程的环境友好、产品使用过程的环境友好、聚烯烃的高性能化和功能化是从事配位聚合工作的全体人员努力的方向。     

单茂钛化合物/MAO/AlR_3均相催化体系合成sPS与aPP研究

先考察部分水解三甲基铝（ＴＭＡ）制备固体改性甲基铝氧烷（ｍ ＭＡＯ）时，反应物Ｈ２Ｏ和ＴＭＡ的摩尔比对固体产物ｍ ＭＡＯ中ＴＭＡ含量的影响；然后考察不同的钛化合物特别是茂钛化合物（ＬｎＴｉＸｎ′，ｎ＝１，２，ｎ′＝２，３）和ｍ ＭＡＯ组成的均相催化体系分别进行苯乙烯间规聚合和丙烯无规聚合的效果作比较．在此基础上分析以茂基三正丙氧基钛［ＣｐＴｉ（ＯＰｒｎ）３］为主催化剂，不同ＴＭＡ含量的ｍ ＭＡＯ为助催化剂，及外加各种烷基铝（ＡｌＲ３）所组成的催化体系中钛的氧化数，同时对苯乙烯间规聚合和丙烯无规聚合进行比较研究，从中发现活性中心钛的氧化数以Ｔｉ（Ⅲ）为主时有利于苯乙烯间规聚合，不利于丙烯无规聚合；而氧化数以Ｔｉ（Ⅳ）为主时则对丙烯无规聚合有利．苯乙烯间规聚合时，外加烷基铝可节省ＭＡＯ用量．     

茂金属催化剂Cp_2~tMCl_2(Cp~t=~tBuC_5H_4,M=Ti、Zr、Hf)聚合丁烯-1的研究

探讨了茂金属催化剂 Cpt2 MCl2 ( Cpt=t Bu C5 H4,M=Ti,Zr,Hf)的合成以及用于聚合丁烯 -1的研究 ,研究了几种不同的茂金属催化剂和不同聚合条件下的催化行为 ,并通过 IR、1 H NMR、EI-MS、DSC、粘度法测分子量和正庚烷抽提等测试手段对催化剂和聚合物进行了表征 .结果表明 ,叔丁基取代的茂金属催化剂催化丁烯 -1聚合具有较高的催化活性 ,叔丁基的引入提高了聚合物的等规度和分子量     

[N,N]-二齿镍配合物催化烯烃聚合

烯烃聚合催化剂的设计是烯烃配位聚合领域的一个核心科学问题,通过设计合成精确结构的催化剂可以有效地调控催化聚合性能以及聚合产物的结构.后过渡金属催化剂由于其易调变性、对聚合产物支化结构的可控性及对极性单体的容忍性,在烯烃聚合领域引起了广泛的关注.本文介绍了近年来本课题组在[N,N]-二齿镍烯烃聚合催化剂设计方面的研究进展,包括四元环的中性脒基镍催化剂、五元环的-二亚胺镍催化剂、2-胺基吡啶和-胺基亚胺系列镍催化剂,以及六元环的-二亚胺和苯胺基亚胺镍催化剂在烯烃聚合的应用.通过优化后过渡金属镍催化剂结构,可成功实施烯烃活性聚合.     

烯烃高效催化剂及聚合与共聚合的研究

为中山大学高分子研究所烯烃配位聚合研究室在高效Ziegler-Natta催化剂、茂金属催化剂烯烃聚合与共聚合方面部分研究工作的概述。重点叙述了催化剂的设计、过渡金属配合物配体结构及聚合条件对乙烯、丙烯、1-丁烯、丁二烯、苯乙烯等烯烃单体聚合及共聚合活性以及聚合产物结构和分子量的影响。     

新型吡啶双亚胺铁催化乙烯聚合反应

合成与表征了一种新型吡啶双亚胺铁烯烃聚合催化剂2,6-二[1-(4-羟基-2,6-二甲基苯胺)乙基]吡啶氯化铁（1a）。结果表明,在亚胺环的对位引入羟基,可同时提高催化剂的活性和聚合物的分子量。在改性甲基铝氧烷(MMAO)的活化下,该催化剂引发乙烯聚合的活性（以单位时间（h）mol Fe引发乙烯聚合的PE质量（g）来表征）可达到6.78×10⁶ g/（mol•h）,明显高于已知催化剂2,6-二[1-(2,6-二甲基苯胺)乙基]吡啶氯化铁（1b）,且能得到更高分子量的聚乙烯。     

Polymerization of ethylene catalyzed by titanocene(iii) -b-diketonate complex and MMAO

Ethylene polymerizations were performed with a catalytic system composed of titanocene(III)-β-diketonate complex such as [Cp2Ti(III)(1-benzoylacetonato)] or [Cp2Ti(III)(dibenzoylmethanato)] and MMAO. These catalysts are active for the polymerization of ethylene to give high-density polyethylene with high molecular weight. This revised version was published online in June 2006 with corrections to the Cover Date.     

聚合物载体负载TiCl4/I-Bu3Al催化烯烃聚合

聚合物负载催化剂;聚合物载体负载TiCl4/I-Bu3Al催化烯烃聚合     

Recent Progress on Transition Metal Catalyst Separation and Recycling in ATRP

Atom transfer radical polymerization (ATRP) is a versatile and robust tool to synthesize a wide spectrum of monomers with various designable structures. However, it usually needs large amounts of transition metal as the catalyst to mediate the equilibrium between the dormant and propagating species. Unfortunately, the catalyst residue may contaminate or color the resultant polymers, which limits its application, especially in biomedical and electronic materials. How to efficiently and economically remove or reduce the catalyst residue from its products is a challenging and encouraging task. Herein, recent advances in catalyst separation and recycling are highlighted with a focus on (1) highly active ppm level transition metal or metal free catalyzed ATRP; (2) post‐purification method; (3) various soluble, insoluble, immobilized/soluble, and reversible supported catalyst systems; and (4) liquid‐liquid biphasic catalyzed systems, especially thermo‐regulated catalysis systems.

     

含N-萘基中性镍催化剂的合成及催化降冰片烯聚合反应

本文合成了两个新的催化剂，苯基-三苯基膦-[N-萘基-3-甲基水杨醛亚胺]合镍(4a)与苯基-三苯基膦-[N-萘基-5-硝基水杨醛亚胺]合镍(4b)，并研究了它们催化降冰片烯的聚合。发现两种催化剂在助催化剂甲基铝氧烷(MAO)存在下都具有良好的催化降冰片烯聚合物活性。在50 ℃时，催化剂4b表现出最高催化活性。     

Ti－Mg系载体催化剂乙烯加氢预聚合对乙烯气相聚合的影响

Ｔｉ－Ｍｇ系载体催化剂乙烯加氢预聚合对乙烯气相聚合的影响李悦，林尚安（东莞理工学院应用化学系，东莞，５１１７００）（中山大学高分子研究所）关键词Ｚｉｅｇｌｅｒ－Ｎａｔｔａ催化剂．预聚合催化剂．乙烯气相聚合乙烯聚合特别是气相聚合十分注意聚合初活性的调节...     

Addition copolymerization of norbornene lactone catalyzed by Pd complexes

The addition copolymerization of norbornene (NB) with functionalized monomers can lead to the modification of physical properties of poly(NB). Herein, the synthesis of new copolymer of NB with exo-norbornene lactone (exo-NBL) is reported. The copolymerization proceeded by four Pd catalytic systems, and of these, Pd(allyl)IDippCl/AgSbF₆ (IDipp = 1,3-bis[2,6-diisopropylphenyl]imidazolin-2-ylidene)) was the most effective for the incorporation of exo-NBL. Specifically, the copolymerization with exo-NBL/NB feed ratio of 50/50 at r.t. by 0.1 mol% of the Pd catalyst produced poly(NB-co-exo-NBL) with M_n of 87,000, and M_w/M_n of 1.2 in 40% yield, incorporating exo-NBL of 18 mol%. The time–conversion plots and ¹H diffusion ordered spectroscopy (DOSY) NMR analysis of the copolymer suggest that it has a random sequence. In contrast, no copolymer was formed from endo-NBL. This is because of steric hindrance of the endo-lactone moiety by considering the (co)polymerization of endo-5-norbornene-2-carboxylic acid methyl ester (endo-NBCO₂Me). The incorporation of exo-NBL improves the solubility of poly(NB-co-exo-NBL) in several chlorinated solvents and gives high thermal stability with 10% weight loss at a temperature of more than 400°C. Two amorphous halos corresponding to intra- and interchain distances were observed in the WAXD patterns, allowing to calculate d-spacing values, which are higher than that of poly(NB).     

单茂钛催化剂的苯乙烯间规聚合和乙烯聚合的比较

考察三甲基铝（ＴＭＡ） 部分水解法制备固体改性甲基铝氧烷（ｍ ＭＡＯ） 时,反应物Ｈ２Ｏ 和ＴＭＡ 的摩尔比对ｍ ＭＡＯ 的产量及ｍ ＭＡＯ 中ＴＭＡ 含量的影响;以五甲基茂基三苄氧基钛［Ｃｐ ＊ Ｔｉ（ＯＢｚ）３］／ｍ ＭＡＯ 组成的均相催化体系,分别考察ｍ ＭＡＯ 的用量［ 即Ａｌ／Ｔｉ 摩尔比］ 及ｍ ＭＡＯ 中ＴＭＡ 含量对苯乙烯间规聚合和乙烯聚合的影响．通过分析Ｃｐ ＊ Ｔｉ（ＯＢｚ）３／ｍ ＭＡＯ 催化体系钛氧化态的分布,发现Ｔｉ（ Ⅲ） 活性中心有利于合成间规聚苯乙烯;而Ｔｉ（ Ⅳ） 活性中心有利于合成聚乙烯．苯乙烯间规聚合时,外加三异丁基铝（ＴＩＢＡ） ,将提高催化活性,同时可节省ＭＡＯ 用量．