Al+与乙硫醇团簇的气相化学反应的实验和理论研究

利用激光溅射-分子束的方法研究了Al⁺和乙硫醇的气相化学反应,结果观察到了Al⁺与1～6个乙硫醇分子形成的团簇离子. 对团簇离子进行了密度泛函理论计算,找到了两种类型的异构体Al⁺(C₂H₅SH)_n和HAl⁺SC₂H₅(C₂H₅SH)_n-1,计算得到了相应的稳定结构和能量.分析质谱信号强度,结合理论计算结果,可推测出实验得到的n=1的产物离子是Al⁺(C₂H₅SH). n=2和3时产物离子开始转变为HAl⁺SC₂H₅(C₂H₅SH)_n-1, n=4时,HAl⁺SC₂H₅(C₂H₅SH)₃和Al⁺(C₂H₅SH)₄两种产物离子都存在,n≥5以后,团簇离子Al⁺(C₂H₅SH)_n开始成为主要的产物离子.     

基于席夫碱配体构筑的LnⅢ2配合物的结构、荧光性质及生物活性

以多齿席夫碱配体H₂L(H₂L=(E)-N′-(3-乙氧基-2-羟基亚苄基)-3-羟基吡啶甲酰肼)为配体,与Ln(acac)₃·2H₂O(Ln=Tb、Ho、Er;acac^-=乙酰丙酮根)反应,通过溶剂热法,成功得到了3例新的双核稀土配合物[Ln₂(acac)₂(L)₂(C₂H₅OH)₂](Ln=Tb((1)、Ho((2)、Er(3))。单晶X射线衍射分析表明：配合物1～3的结构主要由2个Ln^Ⅲ离子、2个乙酰丙酮根(acac^-)、2个L^2-及2个C₂H₅OH组成,中心Ln^Ⅲ离子通过2个μ₂-O原子相互连接,形成一个平行四边形的Ln₂O₂核心。固体荧光实验测...     

醇-二苯甲酮光化夺氢反应活泼自由基的ESR研究

本文用自由基捕捉剂2,3,4,6-四甲基亚硝基苯(ND)及苯亚甲基叔丁基氮氧化合物(PBN)与ESR相结合的方法研究了CnH_2n+1OH(n=1,2,…8)、(CH₃)₂CH(CH₂)_nOH(n=0,1,2)、CH₂=CHCH₂OH及C₆H₅CH₂OH等十三种醇与二苯甲酮的光化夺氢反应中的活泼自由基,结果表明: 1.用ND时,二苯酮分别夺取CnH_2n+1OH、(CH₃)₂CH(CH₂)_nOH及RCH₂OH(R=CH₂=CH、C₆H₅)中α-C、叔-C及α-C上的氢,而捕捉到C_n-1H_2n-1CHOH、(CH₃)₂CH(CH₂)_nOH及RCHOH自由基。 2.用PBN时,捕捉的自由基与ND捕获的相同。     

系列Sm3+配合物的合成、结构及光物理性能

采用水热方法合成了4种Sm³⁺配合物, 即{[SmZn(2,5-pdc)₂(tp)_0.5(H₂O)]·2H₂O}_n(1), [Sm₂Zn₂(C₆H₅COO)₁₀(Imh)₂(H₂O)₂](2), {[Sm₂(NO₂C₆H₄COO)₆(H₂O)₄]·H₂O}_n(3)和{[SmN(CH₂COO)₃(H₂O)₂]·H₂O}_n(4)[2,5-pdc=2,5-吡啶二羧酸根, tp=对苯二甲酸根, C₆H₅COO=苯甲酸根, Imh=咪唑, NO₂C₆H₄COO=对硝基苯甲酸根, N(CH₂COO)₃=氨三乙酸根]. 通过单晶X射线衍射确定了其晶体结构. 在室温下测定了其红外光谱、 紫外-可见-近红外光谱以及在近红外区和可见区的发射光谱. 结果表明, 4种配合物在近红外区或可见区均出现Sm³⁺离子的特征发射. 这是形成配合物后, Zn-配体部分和配体对Sm³⁺离子发光的敏化作用所致. 此外, 讨论了不同有机配体或d过渡金属离子对Sm³⁺离子发光的影响, 并分析了配合物中Sm³⁺离子的近红外发射带位移、 劈裂和加宽的原因.     

一个Yb8簇合物的合成、结构及CO2催化转化性质

使用多齿席夫碱配体H₂L与Yb(acac)₃·2H₂O反应,设计并通过溶剂热法合成了一例结构新颖的八核镱簇合物[Yb₈(acac)₄(HL)₄(L)₂(μ₃-O)₄(C₂H₅O)₄]·2C₂H₅OH·2CH₂Cl₂(1)。单晶X射线衍射分析表明,簇合物呈中心对称的八核结构,中心稀土离子Yb1(Ⅲ)为八配位的双帽三角棱柱几何构型,Yb2、Yb3和Yb4均为七配位,分别为单帽三角棱柱、五角双锥及单帽八面体几何构型。簇合物1具有良好的溶剂稳定性。近红外荧光测试表明：簇合物1在室温下表现出Yb(Ⅲ)特征发射峰。此外,催化性质研究表明：簇合物1可以有效地催化CO₂与环氧化合物的环加成反应,且作为异相催化剂表现出良好的循环性能。     

基于2-氨基吡啶的两个簇基超分子化合物的合成、 结构及催化性能

以磷钼酸、 2-氨基吡啶、 五氧化二钒、 氯化锌和氯化镍等为主要原料, 采用水热方法合成了2个簇基超分子化合物[H₃PMo₁₂O₄₀]₂[C₅H₆N₂]₆(1)和[H₂PMo₁₂V₂O₄₂][C₅H₆N₂]₅·3H₂O(2)(C₅H₆N₂=2-氨基吡啶). 通过元素分析、 红外光谱、 紫外-可见光谱、 X射线光电子能谱、 热重分析、 X射线单晶衍射及X射线粉末衍射等手段对化合物进行了结构表征. 结构分析显示, 簇单元不同的2个超分子化合物以各自独特的堆积方式形成三维超分子网络. 利用苯乙烯的环氧化反应研究了2个化合物的催化性能.     

Mn/Se,MnO2/Se和Mn/SeO2体系形成的团簇离子的质谱研究

用飞行时间质谱法研究了激光直接溅射Mn/Se混合样品产生的二元团簇、团簇的光解行为及溅射MnO₂/Se和Mn/SeO₂样品产生的团簇正负离子。在Mn-Se二元团簇中,(Muse)_n⁺是正离子的主要组分,[(Muse)nSe]^-是负离子的主要组分。当n<5时,(Muse)_n⁺的紫外光解有多种通道;n≥5时光解以剥落MuSe方式进行。激光直接溅射MnO₂/Se,Mn/SeO₂两种体系产生的正负离子极为相似,符合团簇的气相聚合生长机理。正离子中(Mno)_n⁺是主要组分,负离子中Se_n^-,(Se_nO)^-和(SéO₃)^-是主要组分。     

C1～C3正构醛、醇在质子转移反应飞行时间质谱中的产物离子特征分析

为分析C₁～C₃正构醛、 醇化合物在质子转移反应飞行时间质谱(PTR-TOF MS)中的产物离子特征, 考察了不同E/N值(E: 电场强度, N: 气体分子数密度)下C₁～C₃正构醛、 醇的产物离子种类和强度的变化. 结果表明, 低分子量正构醇类(甲醇、 乙醇和丙醇)倾向于形成质子化聚合物[nMH]⁺及其失水离子[nMH-H₂O]⁺, 且随着E/N值升高, 醇类会产生较多裂解碎片和多聚体离子. 低分子量正构醛(甲醛、 乙醛和丙醛)主要产生质子化产物[MH]⁺和一水合质子化产物[M·H₃O]⁺, 高E/N值(>125 Td)会抑制甲醛质子化, 也会抑制其加合产物的生成. 乙醛倾向于形成水加合物, 且随着E/N值增高, 质子化乙醛与一水合质子化乙醛的变化趋势相反. 另外, 丙醛在较高的E/N值下会产生一系列聚合物, 如[MH·C₂H₅]⁺和[2MH]⁺. 通过分析C₁～C₃正构醛、 醇的质子转移反应特征及产物离子形成过程, 获得了C₁～C₃正构醛、 醇的特征离子和对应的最佳E/N设置值, 为低分子量醛、 醇的定性分析提供了重要依据.     

氟氯酰与丙烷反应的密度泛函理论研究

应用密度泛函理论(DFT), 对氟氯酰(ClF₃O)引发丙烷(C₃H₈)反应生成C₃H₇自由基或丙醇等产物的机理进行了研究. 在B3PW91/6-311＋＋G(d,p)水平上优化了9个不同反应通道上各驻点物(反应物、中间体、过渡态和产物)的几何构型, 并计算了它们的振动频率和零点振动能. 通过零点能校正计算了各反应路径的活化能, 并应用过渡态理论计算了各反应路径常温下的速率常数k. 计算结果表明: ClF₃O与C₃H₈反应可经过不同路径生成HF, C₃H₇自由基和C1F₂O自由基或C₃H₇OH和ClF₃. 其中, 最可几反应路径为ClF₃O分子的中间位F原子进攻丙烷β位H原子的反应, 活化能仅为7.54 kJ/mol, 速率常数为0.153×10⁶ mol^－1•dm³•s^－1.     

孔隙结构可调的Cu2O球状纳米结构及其NO2气体传感性质

报道在聚乙烯吡咯烷酮(PVP)的协助作用下,通过简单调节OH^-离子的浓度及Cu²⁺的释放速度,将Cu₂O调节为具有不同空腔特征(介孔、空心及实心)结构的纳米球.研究表明, OH^-根离子的扩散动力学是决定产物结构的关键因素.当[OH^-] > 0.05 mol·L^-1时,高的化学势使其迅速扩散到PVP胶团内部,与吸附在PVP链上的Cu²⁺反应形成Cu(OH)₂,在抗坏血酸(Vc)的还原作用下经过重结晶得到Cu₂O实心球纳米结构;当[OH^-] < 0.025 mol·L^-1时,其扩散速度下降,首先与吸附在PVP胶团外部的Cu²⁺反应形成Cu(OH)₂, Cu(OH)₂的形成阻碍了OH^-离子的向内扩散,形成具有较大空腔(~220 nm)的空心球;当0.025 mol·L^-1 < [OH^-] < 0.05 mol·L^-1时,形成较小空腔(30-60 nm)的空心球.以NH₃水为OH^-缓释源时,虽然OH^-浓度较低,但同时Cu²⁺的浓度也低,胶团外部形成的Cu(OH)₂不足以阻碍OH^-离子的向内扩散,反应过程中NH₃的释放及较低的OH^-浓度阻碍了重结晶的发生,从而形成Cu₂O介孔纳米球.对三种典型结构特征的产物进行了NO₂气体传感性质研究,结果表明, Cu₂O介孔纳米球相比空心结构和实心结构具有更为优异的响应性.结合比表面积数据,我们认为介孔纳米球疏散的结构有利于NO₂气体的扩散和O₂的吸附,从而表现出了更灵敏的气体传感性.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.