Regimes of operation states in passively mode-locked fiber soliton ring laser

The principal of passively mode-locked fiber soliton ring lasers is summarized, including its three output operation states: normal soliton, bound–solitons and noise-like pulse. The experimental results of the passively mode-locked fiber soliton ring lasers developed by us are given. Bound–solitons with different discrete separations and three-bound–solitons state have been observed in our fiber laser for the first time. The relationship among three operation states in fiber soliton laser is analyzed.     

Generation of 15-nJ bunched noise-like pulses with 93-nm bandwidth in an erbium-doped fiber ring laser

We report on the generation of high power superbroad spectrum bunched noise-like pulses from a passively mode-locked erbium-doped fiber ring laser without using the stretched-pulse technique. The maximum 3-dB spectral bandwidth of the noise-like pulses is about 93 nm with an energy of about 15 nJ. We further show numerically that the superbroad spectrum of the pulses is caused by the transform-limited feature of the pulses together with the Raman self-frequency shift effect. PACS 42.65.Dr; 42.55.Wd; 42.60.Fc; 42.81.Dp     

基于多波长类噪声脉冲的掺铒光纤激光器

报道了一种基于多波长类噪声脉冲的被动锁模掺铒光纤激光器。采用980 nm半导体激光器作为泵浦源，2.5 m长的掺铒光纤作为增益介质。锁模机制为非线性放大环形镜(NALM)。通过自相关迹证明输出脉冲为类噪声脉冲。该类噪声脉冲的光谱3 dB带宽可达17.2 nm，边模抑制比为47.7 dB，重复频率为5.434 MHz，单脉冲能量为7.9 nJ。为了实现平坦的多波长输出，在NALM结构中加入Sagnac环干涉仪，获得了最大波长数为5的平坦多波长类噪声脉冲，平坦度为1.995。     

超长腔碳纳米管锁模多波长掺镱光纤激光器

报道了一种超长腔碳纳米管锁模多波长掺镱光纤激光器, 光纤激光器的总长度为1021.2 m. 实验得到了噪声型孤子和孤子雨两种类型的多波长锁模脉冲, 重复频率均为199.8 kHz. 孤子雨具有更高的输出功率和单脉冲能量, 分别为40.3 mW和201.5 nJ, 对应的脉冲宽度为102.5 ns.     

色散管理掺铥光纤激光器高能量脉冲的产生

设计了一种基于色散管理的掺铥光纤激光器。通过调节泵浦功率以及腔内偏振态，首先实现了稳定的展宽脉冲输出，中心波长和脉冲宽度分别为1 939.4 nm和482 fs。最大输出功率为15 mW，对应的单脉冲能量为0.52 nJ。增加泵浦功率到645 mW时，通过适当调节偏振控制器可以实现类噪声脉冲锁模，中心波长为1 940.1 nm。所实现的锁模脉冲具有飞秒量级的尖峰以及皮秒量级的基底。最大输出功率为20.4 mW，相对应的单脉冲能量为0.7 nJ。相比于传统孤子，采用色散管理所实现的锁模脉冲具有更高的脉冲能量。此外，所设计的掺铥光纤激光器可作为理想的主振荡功率放大以及啁啾脉冲放大结构的种子源，进一步提高脉冲能量，拓展2 μm高能光纤激光器的实际应用。     

Different operation states of soliton pulses in an erbium-doped fibre ring laser

We report on the experimental observation of soliton pulses in an erbium doped fibre ring laser. The passive mode-locking is achieved using the nonlinear polarization rotation technique. By adjusting the pump power and the intracavity polarization controllers, a normal soliton, a stable 8th harmonic mode-locked pulse and a noise-like pulse have been observed in our laser. The experimental results revealed that the noise-like pulse is not suitable for the optical telecommunication, and in order to obtain the stable harmonic mode-locked soliton, a strong unstable CW laser field is necessary to mediate global soliton interaction. The formation mechanism of the harmonic mode-locked pulse has also been analysed.     

Numerical analysis of a broadband spectrum generated in a standard fiber by noise-like pulses from a passively mode-locked fiber laser

This paper covers a numerical analysis of supercontinuum spectrum generation in a piece of standard fiber by using as the pump noise-like pulses produced by a passively mode-locked fiber laser. An experimental study was also carried out, yielding results that support the numerical results. In the numerical study we estimated that the spectral extension of the generated supercontinuum reaches ~ 1000 nm, and that it presents a high flatness over a region of ~ 220 nm (1630 nm-1850 nm) when we use as the pump noise-like pulses with a wide optical bandwidth (~ 50 nm) and a peak power of ~ 2 kW. Experimentally, the output signal spectrum extends from ~ 1530 nm to at least 1750 nm and presents a high flatness over a region of 1640 nm to 1750 nm for the same value of numerical input power, 1750 nm being the upper limit of the optical spectrum analyzer. The numerical analysis presented here is thus an essential part to overcome the severe limitation in measuring capabilities and to understand the phenomena of supercontinuum generation, which is mainly related to Raman self-frequency shift. Finally, this work demonstrates the potential of noise-like pulses from a passively mode-locked fiber laser for broadband spectrum generation.     

SOA-based actively mode-locked fiber ring laser by forward injecting an external pulse train

An actively mode-locked fiber ring laser based on cross-gain modulation (XGM) in a semiconductor optical amplifier (SOA) is demonstrated to operate stably with a simple configuration. By forward injecting an easily-generated external pulse train, the mode-locked fiber laser can generate an optical-pulse sequence with pulsewidth about 6 ps and average output power about 7.9 mW. The output pulses show an ultra-low RMS jitter about 70.7 fs measured by a RF spectrum analyzer. The use of the proposed forward-injection configuration can realize the repetition-rate tunability from 1 to 15 GHz for the generated optical-pulse sequences. By employing a wavelength-tunable optical band-pass filter in the laser cavity, the operation wavelength of the designed SOA-based actively mode-locked fiber laser can be tuned continuously in a wide span between 1528 and 1565 nm. The parameters of external-injection optical pulses are studied experimentally to optimize the mode-locked fiber laser.     

Impacts of operational parameters on nonlinear polarization rotation-based passively mode-locked fiber laser

The operational parameters including the polarization controlling and the pump power in a nonlinear polarization rotation-based passively mode-locked fiber laser are studied in this paper.The carrier rate equations of the activated erbium-doped fiber are first employed together with the nonlinear Shro¨dinger equations to reveal the relation between the operational parameters and the output state of the passively mode-locked fiber laser.The numerical and experimental results demonstrate that the output state of the mode-locked laser varies with the polarization controlling and the pump power.The periodicity of the polarization controlling is observed.With given pump power,there exists a set of polarization controlling under which the ultra-short pulse can be generated.With given polarization controlling,the mode-locked state can be maintained generally except for some particular values of pump power.Three shapes of the output optical spectra from the fiber cavity can be identified when the pump power changes.The results in this paper provide a comprehensive insight into the operation of the nonlinear polarization rotation-based passively mode-locked fiber laser.     

被动谐波锁模Er3+/Yb3+共掺双包层光纤环形腔激光器

 为了实现高重复频率和高功率的光脉冲,实验采用Er³⁺/Yb³⁺共掺双包层光纤作为增益介质,稳定的中心波长为976 nm的高功率半导体激光器作为泵浦源,利用非线性偏振旋转锁模技术,得到稳定的自起振锁模光脉冲。当泵浦功率为2.4 W时,激光器输出重复频率为8.829 MHz的连续锁模光脉冲,平均输出功率为52.5 mW,自起振锁模泵浦阈值功率为0.6 W,并观测到了稳定的高阶谐波锁模、调Q和调Q-锁模光脉冲输出。     

Tunable 12×10 GHz mode-locked semiconductor fiber laser incorporating a Mach-Zehnder interferometer filter

A stable multiwavelength mode-locked semiconductor fiber ring laser incorporating a fiber Mach-Zehnder interferometer (MZI) filter was proposed and experimentally demonstrated. A semiconductor optical amplifier (SOA) serves as an optically controlled mode-locking element due to gain exhaustion caused by external injected optical pulses. Another SOA severs as a constant-gain medium. A fiber MZI filter with a temperature control is incorporated into the fiber ring cavity to acquire a stable and tunable multiwavelength oscillation. Twelve wavelengths are synchronously mode-locked at 10 GHz, pulse width of mode-locked pulse are about 30 ps. Proposed multiwavelength mode-locked semiconductor fiber ring laser has some distinct advantages, such as simple and compact structure, easy integration, convenient tuning, good stability, potential high repetition rate operating, which has potential application in the future WDM communication system.     

被动谐波锁模掺Yb3+光纤环形激光器

 利用光纤的非线性偏振旋转效应产生可饱和吸收体的锁模机制，从掺Yb³⁺光纤环形激光器中得到稳定高阶谐波锁模光脉冲。理论分析了工作于正色散区的掺Yb³⁺光纤环形激光器的特性。实验中观测到了掺Yb³⁺光纤环形激光器3种不同演化方式产生高阶锁模光脉冲。4阶谐波锁模脉冲（107.2 MHz重复频率）经过1 m长高掺杂Yb³⁺光纤放大器放大后产生了平均功率100 mW，脉宽22.8 ps的脉冲，最后经过光栅压缩得到了平均输出功率20 mW，脉宽307 fs，脉冲中心波长1 051.2 nm，带宽13.76 nm的激光。     

全正色散多波长被动锁模耗散孤子掺镱光纤激光器

报道了一种带有周期性双折射光纤滤波器的全正色散多波长被动锁模耗散孤子掺镱光纤激光器. 通过数值模拟发现加入滤波器后激光器能输出多波长耗散孤子脉冲, 调节滤波器带宽大小可以得到不同波长个数和波长间隔的多波长锁模耗散孤子脉冲. 在激光器产生的四波长和五波长耗散孤子脉冲中观察到了耗散孤子分子, 并且通过调节滤波器参数和饱和功率可以改变多波长脉冲中耗散孤子分子的个数和波长. 这是在被动锁模光纤激光器中首次实现包含有耗散孤子分子的多波长脉冲. 另外还在实验上实现了全正色散双波长被动锁模耗散孤子的产生. 关键词： 全正色散 耗散孤子 多波长脉冲 孤子分子     

全光纤超短脉冲掺Yb3+光纤环形激光器

讨论了自启动被动锁模掺Yb³⁺光纤环形激光器产生短脉冲的机理，并研制出全光纤结构超短脉冲掺Yb³⁺光纤环形激光器.采用两个976nm半导体激光器级联抽运作为抽运源，高掺杂浓度掺Yb³⁺光纤作为增益介质，利用光纤的非线性偏振旋转效应，得到自启动、十分稳定的ps量级锁模光脉冲.激光器锁模阈值功率260mW，输出功率25mW，锁模光脉冲中心波长1056nm，3dB带宽11.7nm，重复频率20MHz.与其他结构光纤激光器相比，这种全光纤结构具有更高的效率和更好的稳定性. 关键词： 环形光纤激光器 3+光纤')" href="#">高掺杂浓度掺Yb³⁺光纤 自启动 被动锁模     

Multiwavelength actively mode-locked fiber ring laser with a dispersion compensated cavity

A multiwavelength actively mode-locked fiber ring laser that utilises a single semiconductor optical amplifier as both a gain and mode-locking element is presented. It is verified experimentally that the number of mode-locked wavelengths may be maximised by compensating for the anomalous intra-cavity dispersion. This is achieved through the inclusion of an appropriate length of normal dispersion fiber in the laser cavity. Using this technique, the number of wavelengths simultaneously mode-locked at 10 GHz was increased from 2 to 5.     

被动锁模Yb3+光纤环形腔激光器的研究

 采用974 nm半导体激光器作为泵浦源，超高掺杂Yb³⁺光纤作为增益介质，利用光纤的非线性偏振旋转效应，得到稳定的ps量级锁模光脉冲。泵浦功率220 mW时，激光器锁模阈值功率150 mW，输出功率26 mW，锁模光脉冲中心波长1 046 nm，3 dB带宽6.01 nm，20 dB带宽16 nm，脉宽22 ps，重复频率20 MHz。与同类光纤激光器相比，该激光器输出功率高，具有更好的稳定性。     

Femtosecond mode-locked Yb fiber laser for single-mode fiber chirped pulse amplification system

High-peak-power laser systems are based on the chirped pulse amplification (CPA) technique. CPA laser system needs a mode-locked laser oscillator for stable ultrashort pulse laser generation. We report a single-mode fiber CPA system which consists of stable mode-locked Yb-doped fiber laser oscillator with a wide tuning range, chirped fiber Bragg grating stretcher, and two Yb-doped fiber amplifiers. The single-mode fibers can generate high-quality and single-mode beams which are stable for long time.     

Environmentally stable ytterbium figure-of-eight fiber laser producing 177-fs pulses

Pulses of 177 fs and 1035 nm, with average power of 1.2 mW, have been generated directly from a passively mode-locked Yb-doped figure-of-eight fiber laser, with a nonlinear optical loop mirror for mode-locking and pairs of diffraction gratings for intracavity dispersion compensation. To our knowledge, these are the shortest pulses ever to come from a passively mode-locked Yb-doped figure-of-eight fiber laser. This represents a 5-fold reduction in pulse duration compared with that of previously reported passively mode-locked Yb-doped figure-of-eight fiber lasers. Stable pulse trains are produced at the fundamental repetition rate of the resonator, 24.0 MHz.     

Gain-guided soliton in a positive group-dispersion fiber laser

We report on the operation of a passively mode-locked fiber ring laser made of purely normal dispersive fibers. Self-started mode locking can still be achieved in the laser by use of the nonlinear polarization rotation technique, and the mode-locked pulse has large pulse energy, strong frequency chirp, and a mode-locked spectral width limited by the effective laser gain bandwidth. Furthermore, we show that the operation of the laser can be well described by an extended Ginzburg-Landau equation model that governs the soliton dynamics of fiber lasers.     

All-fiber passively mode-locked laser oscillator at 1.5 microm with watts-level average output power and high repetition rate

We report on a passively mode-locked all-fiber laser oscillator at 1.5 microm based on heavily doped phosphate-glass active fiber. An active fiber only 20 cm long is sufficient to produce as much as 2.4 W of average output power directly from the oscillator. The width of the mode-locked pulses varies from 8 ps at the lowest output power in the mode-locked state to 44 ps at the highest power. Our picosecond laser oscillator features a high repetition rate of 95 MHz and high peak pulse power of approximately 540 W. The oscillator combines the convenience of all-fiber construction with power performance that was previously achievable only with mode-locked bulk-optic laser oscillators or more complex systems involving fiber amplifiers.