锂离子电池硅-锰复合材料的电化学性能

The Si-Mn composites were synthesized by ball-milling mixtures of four different atomic ratios of Si/Mn. The phases of composites were analyzed with X-ray diffraction. Their charge-discharge performance as negative electrodes in Li-ion batteries were tested and the formation of SEI film was studied by differential capacity plots. The results show that materials prepared by ball-milling technology are composites consisting of Si and Mn. The insertion of lithium ions leads to the formation of amorphous Li-Si alloy. The initial reversible capacity and efficiency of Si-Mn composites are increased and the cycle life is enhanced obviously，especially after their heat treatment. The composite of Si∶Mn=4∶6 exhibits a reversible capacity of 546.0 mAh·g^-1 and a charge-discharge efficiency of 70%. The reversible capacity maintains at 374.2 mAh·g^-1 after 40 cycles.     

碳包覆LiFePO4的一步固相法制备及高温电化学性能

Carbon coated LiFePO₄ cathode material was synthesized by one-step solid-state reaction and characterized by X-ray diffraction (XRD), field-emission-scanning electron microscope (FESEM). Electrochemical performances of the material as cathode in lithium-ion battery were investigated at medium and elevated temperature (30 and 55 ℃) by galvanostatic charge-discharge and A.C. impedance tests. The results show that carbon coated LiFePO₄ powder exhibits a well-crystallized olivine structure and spherical morphology with an average particle size of about 500 nm. Galvanostatic charge-discharge tests show that the reversible discharge capacity at 1 C and 1.5 C rates was improved from 121 and 105 mAh·g^-1 at 30 ℃ to 136 and 123 mAh·g^-1 at 55℃, respectively, while the enhancement of high temperature on electrochemical performance is less obvious at a rate lower than 0.5 C. Impedance spectra analyses indicate that the cathode material has a remarkably higher lithium-ion diffusivity at 55 ℃ than that at 30 ℃, which improves the electrochemical performance at high temperature.     

预氧化固气法合成LiNiO2的研究

LiNiO₂ was prepared by reaction of stoichiometric amounts of thoroughly-mixed LiOH·H₂O and preoxidation nanometer-scale Ni₃O₂(OH)₄ powders in O₂ at the temperature of 700℃ for 6h. The products were tested by XRD， XPS， SEM and electrochemistry methods. It was shown that product was LiNiO₂ single-phase， and the valence of nickel was +3; the average size of it was 40nm; its initial charge specific capacity is 168mAh·g^-1 and the coulomb efficiency is 90%; the second charge specific capacity is 160mAh·g^-1 and the coulomb efficiency is 96%.     

锂离子二次电池正极材料LiVPO4F的制备及其电化学性能的研究

A new cathode material, LiVPO₄F, has been synthesized through two steps of solid-state reactions. In the first step, vanadium pentoxide, ammonium dihydrogen phosphate, and a high surface area carbon were pre-heated at 300 ℃ and reacted at 750 ℃ under an inert atmosphere to yield the trivalent vanadium phosphate VPO₄. In the second step, the product LiVPO₄F was synthesized by the reaction with VPO₄ and LiF. The LiVPO₄F was characterized by X-ray diffraction, scanning electron microscopy, cyclic voltammetry and charge/discharge testing measurements. The LiVPO₄F is triclinic crystalline system. At 0.1 C rate, the first charge/discharge capacities were 150.1 mAh·g^-1 and 132.6 mAh·g^-1; At 0.2 C rate, the first charge/discharge capacities were 142.9 mAh·g^-1 and 125.2 mAh·g^-1. The LiVPO₄F from this work has higher charge/discharge voltage 4.3 V and 4.1 V, respectively.     

锂离子电池正极材料LiNi1-xCoxO2的合成及电化学性能研究

LiNi_1-xCo_xO₂ cathode materials for lithium ion batteries were synthesized by the co-precipitation and solid-state reaction methods with LiOH·H₂O, Ni(NO₃)₂·6H₂O and Co(NO₃)₂·6H₂O as raw materials. The materials were characterized by XRD, SEM and electrochemical tests. The results showed that synthesized cathode materials were with layered structure similar to α-NaFeO₂ and uniform morphology and nearly normal grain size distribution and better electrochemical performance when x was 0.18. The first charge and discharge capacity of the cathode material was 224.3 mAh·g^-1 and 194.2 mAh·g^-1, respectively. 88.5% of the first discharge capacity remained at the 20th cycle.     

不同原料对Li-Ni-Mn-O 5 V正极材料的结构和性能的影响

LiNi_0.5Mn_1.5O₄ was synthesized by solid-state reaction with different Ni containing precursors. The effect of precursor on electrochemical performance was studied. It was demonstrated that LiNi_0.5Mn_1.5O₄ synthesized with Ni(NO₃)₂·6H₂O as precursor had good charge-discharge performances. At the potential range of 3.0～5.0 V, the reversible capacity of the above LiNi_0.5Mn_1.5O₄ could reach to 145 mAh·g^-1 and remained 143 mAh·g^-1 after 10 cycles, while at 3.0～4.9 V, there was still 133 mAh·g^-1 reversible capacity, and was 125 mAh·g^-1 after 40 cycles. XRD results indicated that the synthesized compound was with spinel structure. The precursors and dispersion method had remarkable effect on the structures of the resulting compounds. Pure spinel phase could be obtained with mechanical ball-milled method and Ni(NO₃)₂·6H₂O as precursor, and trace amount of NiO phase could be detected in LiNi_0.5Mn_1.5O₄ with simple mixture method and using Ni(CH₃COO)₂·6H₂O, NiO and Ni₂O₃ as precurs-ors.     

新型锂离子电池正极材料LiVOPO4的制备与表征

Novel lithium-ion battery cathode material LiVOPO₄ was synthesized by sol-gel method using lithium hydroxide, ammonium metavanadate, phosphoric acid and citric acid as raw materials. The microstructure, surface morphology and electrochemical properties were characterized by various electrochemical methods in combination with thermogravimertric (TG) analysis and differential thermal analysis (DTA), X-ray diffraction (XRD), infrared (IR) spectroscopy, scanning electron microscope (SEM). Results show that the sample obtained by calcinating at 650 ℃ for 6 h is made up of uniform particles with size of 2～3 μm. The first discharge, charge capacity and columbic efficiency of LiVOPO₄ is 137.1 mAh·g^-1, 146.1 mAh·g^-1 and 93.8%, respectively. After 80 cycles the discharge capacity is kept at 130.4 mAh·g^-1, which is 95.1% of the first discharge capacity, and the capacity loss per cycle was only 0.061%, suggesting the LiVOPO₄ derived by this method is a promising cathode material for lithium ion batteries.     

纳米SrTiO3对高铁酸盐电化学性能影响研究

Two ferrates, K₂FeO₄ and BaFeO₄, had been prepared and characterized by XRD, IR and SEM. The electrochemical tests of the samples were carried out in the voltage range of 0.8～2.0 V and current density of 0.5～3.0 mA·cm^-2. The results indicated that performance of Zn-BaFeO₄ battery was superior to that of Zn-MnO₂ and Zn-K₂FeO₄ batteries. Nanometer SrTiO₃ prepared by Sol-gel methode with different ratio was added to the BaFeO₄ cathode in order to improve the discharge performance. The discharge capacity of the BaFeO₄ cathode was increased from 224 mAh·g^-1 to 246 mAh·g^-1 by addition of 5% nanometer SrTiO₃. The reason of enhancing BaFeO₄ electrochemical performance was discussed.     

水热法制备高纯超细CeO2-ZrO2复合氧化物

Superfine composite powders of CeO₂-ZrO₂ (CZ) and CeO₂-ZrO₂-La₂O₃ (CZL) were prepared by hydrothermal method. The effects of pH、temperature and time for hydrothermal process on the performance of the resulting powders were studied. The optimized reaction parameters were on follows: the precursor′s pH≈9.0, hydrothermal temperature of 200 ℃ holding for 2 h. Thermal stable powders with average particle size smaller than 10 nm and specific surface area of 171 m²·g^-1 were obtained. A BET specific surface area was still at 44 m²·g^-1 after calcination at 1 000 ℃ for 6 hours.     

LiV3O8的合成及其电化学性能研究

The layered trivanadate, LiV₃O₈, was prepared by sol-gel method with LiOH, V₂O₅ and H₂O₂ as initial reagents. The materials at different heat treatment conditions were characterized by XRD and TG-DTA. Their electrochemical behaviors were studied by galvanostatic charge-discharge and cyclic voltammetry. The results show that LiV₃O₈ prepared by sintering at 300 ℃ for 16 h has higher capacity, and its initial discharge capacity is 333.1 mAh·g^-1, and maintains a discharge capacity of 302.8 mAh·g^-1 after 10 cycles at 0.2 C and the voltage range of 1.8～4.0 V.     

Furyl- and thienyl-silatranes and germatranes

We review our research on the synthesis and study of the physical and biological properties of furyl- and thienylgermatranes and -silatranes.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 6, pp. 725–732, June, 1992.     

Review and patents and literature

The use of the insect cell/baculovirus expression system for producing recombinant proteins of bacterial, plant, insect, and mammalian origin has become widespread. The popularity of this eukaryotic expression system is due to many factors, including (1) potentially high protein expression levels, (2) ease and speed of genetic engineering, (3) ability to accommodate large DNA inserts, (4) protein processing similar to higher eukaryotic cells (e.g., mammalian cells), and (5) ease of insect cell growth (e.g., suspension growth). The following review of the literature discusses two engineering aspects of recombinant protein synthesis by insect cell cultures: bioreactor scale-up and insect cell line selection. Following this review patent abstracts and additional literature pertaining to expression of recombinant proteins in insect cell culture are listed.     

Ground- and excited-state aromaticity and antiaromaticity in benzene and cyclobutadiene

The aromaticity and antiaromaticity of the ground state (S 0), lowest triplet state (T 1), and first singlet excited state (S 1) of benzene, and the ground states (S 0), lowest triplet states (T 1), and the first and second singlet excited states (S 1 and S 2) of square and rectangular cyclobutadiene are assessed using various magnetic criteria including nucleus-independent chemical shifts (NICS), proton shieldings, and magnetic susceptibilities calculated using complete-active-space self-consistent field (CASSCF) wave functions constructed from gauge-including atomic orbitals (GIAOs). These magnetic criteria strongly suggest that, in contrast to the well-known aromaticity of the S 0 state of benzene, the T 1 and S 1 states of this molecule are antiaromatic. In square cyclobutadiene, which is shown to be considerably more antiaromatic than rectangular cyclobutadiene, the magnetic properties of the T 1 and S 1 states allow these to be classified as aromatic. According to the computed magnetic criteria, the T 1 state of rectangular cyclobutadiene is still aromatic, but the S 1 state is antiaromatic, just as the S 2 state of square cyclobutadiene; the S 2 state of rectangular cyclobutadiene is nonaromatic. The results demonstrate that the well-known "triplet aromaticity" of cyclic conjugated hydrocarbons represents a particular case of a broader concept of excited-state aromaticity and antiaromaticity. It is shown that while electronic excitation may lead to increased nuclear shieldings in certain low-lying electronic states, in general its main effect can be expected to be nuclear deshielding, which can be substantial for heavier nuclei.     

Determination and study on residue and dissipation of benazolin-ethyl and quizalofop-p-ethyl in rape and soil

A QuEChERS (quick, easy, cheap, effective, rugged, and safe) method for the determination of benazolin-ethyl and quizalofop-p-ethyl in rape and soil by high-performance liquid chromatography-tandem mass spectrometry has been developed in this study. The residue and dissipation of benazolin-ethyl and quizalofop-p-ethyl in rape and soil were determined with the developed method. The half-lives of benazolin-ethyl in rape straw and soil were 3.7–5.1 days and 14.3–26.3 days, respectively. The half-lives of quizalofop-p-ethyl in rape straw and soil were 5.0-6.1 days and 0.3–9.7 days, respectively. The residue of benazolin-ethyl and quizalofop-p-ethyl in rapeseed and soil were below the detection limit (i.e., 0.5?mg?kg^?1, the maximum residue level of European Union for quizalofop-p-ethyl).     

Syntheses and structures of P-anilino-P-chalcogeno- and P-anilino-P-iminodiazasilaphosphetidines and their group 12 and 13 metal compounds

The P-anilino-P-chalcogeno(imino)diazasilaphosphetidines [Me(2)Si(mu-N(t)Bu)(2)P=E(NHPh)] (E = O (3), S (4), Se (5), N-p-tolyl (6)) were synthesized by oxidizing the P-anilinodiazasilaphosphetidine [Me(2)Si(N(t)Bu)(2)P(NHPh)] (2) with cumene hydroperoxide, sulfur, selenium, and p-tolyl azide, respectively. The lithium salt of 4 reacted with thallium monochloride to produce ([Me(2)Si(mu-N(t)Bu)(2)P=S(NPh)-kappaN-kappaS]Tl)(7), which features a two-coordinate thallium atom. Treatment of 4-6 with AlMe(3) gave the monoligand dimethylaluminum complexes ([Me(2)Si(mu-N(t)Bu)(2)P=E(NPh)-kappaN-kappaE]AlMe(2)) (E = S (8), Se (9), N-p-tolyl (10)), respectively. In these complexes the aluminum atom is tetrahedrally coordinated by one chelating ligand and two methyl groups, as a single-crystal X-ray analysis of 8 showed. A 2 equiv amount of 4-6 reacted with diethylzinc to produce the homoleptic diligand complexes ([Me(2)Si(mu-N(t)Bu)(2)P=E(NPh)-kappaN-kappaE](2)Zn)(E = S (11), Se (12), N-p-tolyl (13)). A crystal-structure analysis of 11 revealed a linear tetraspirocycle with a tetrahedrally coordinated, central zinc atom.     

多环芳二酐型聚酯亚胺膜的透气性能

多环芳二酐型聚酯亚胺膜的透气性能李悦生，丁孟贤，徐纪平（浙江大学高分子科学与工程研究所，杭州，３１００２７）（中国科学院长春应用化学研究所）关键词聚醚酰亚胺，聚酯酰亚胺，膜，透气性通常的聚酰亚胺加工性能较差，在芳环二酐的苯环间引入醚键等柔性基团后，其...