烟酸的低温热容和标准摩尔生成焓

利用精密自动绝热热量计测量了分析纯烟酸在78～400 K温区的低温热容. 用最小二乘法将实验摩尔热容对温度进行拟合, 得到了热容随温度变化的多项式方程. 用此方程进行数值积分, 得到在此温区每隔5 K的舒平热容值和相对于298.15 K时的热力学函数值. 利用精密静止氧弹燃烧热量计测定了烟酸在298.15 K时的恒体积燃烧能为 Δ_cU＝ －(24528.3±16.1) J•g^－1. 依据物质燃烧焓定义计算出烟酸的标准摩尔燃烧焓为: Δ_cH_m^o＝－(3019.05±1.98) kJ•mol^－1. 最后, 依据Hess定律计算出烟酸的标准摩尔生成焓为: Δ_fH_m^o＝－(56.76±2.13) kJ•mol^－1.     

Nd(Gly)2Cl3·3H2O和Pr(Ala)3Cl3·3H2O的热力学性质

利用精密自动绝热热量计测定了Nd(Gly)₂Cl₃·3H₂O在80-357K和Pr(Ala)₃Cl₃·3H₂O在80-374K温区的热容. 根据两个化合物的热容计算出了相对于参考温度298.15K的热力学函数(H_T?H_298.15)和(S_T?S_298.15). 根据热重(TG)分析结果, 提出了这两个稀土化合物可能的热分解机理. 利用溶解-反应恒温热量计测定相关化合物的溶解焓并设计盖斯热化学循环, 计算出了两个化合物的标准摩尔生成焓.     

八水氢氧化钡Ba(OH)2×8H2O(s)的低温热容和热力学性质

八水氢氧化钡Ba(OH)₂×8H₂O(s)因相变潜热大使其作为胶囊化相变储能材料的应用已受到人们的广泛关注, 但是其热力学性质数据依然缺乏. 本文利用精密自动绝热量热计准确测定了八水氢氧化钡Ba(OH)₂×8H₂O(s)在78－370 K温区的低温热容. 在热容曲线上发现在345－356 K温区有一个明显的吸热峰. 通过分析发现, 这个峰对应着样品的熔化和第一次脱水的焓变之和. 用最小二乘法将78－345 K和356－369 K两个温区的摩尔热容实验值分别拟合成了热容对温度的多项式方程. 通过在温区298－370 K内的三次重复热容测量，得到了相转变所对应的峰温、焓变和熵变分别为：(355.007 ± 0.076) K, (73.506 ± 0.011) kJ×mol^-1 and (207.140 ± 0.074) J×K^-1×mol^-1. 通过两个热容多项式方程的数值积分计算出了这个化合物的舒平热容值和相对于298.15 K的热力学函数,(H_T - H_298.15K) 和 (S_T - S_298.15K). 另外，利用DSC和TG-DTG技术对这个化合物的热分解行为进行了进一步的研究. 从实验结果的分析知, 这个化合物的相转变的潜热之所以变得比正常化合物的大, 主要原因是它融化过程中伴随着7 H₂O 和脱出.     

配合物Zn(Met)SO4•H2O(s)的低温热容和标准摩尔生成焓

利用精密自动绝热热量计直接测定了配合物Zn(Met)SO₄•H₂O(s) 在78～370 K温区的摩尔热容. 通过热容曲线的解析得到该配合物的起始脱水温度为T₀＝329.50 K. 将该温区的摩尔热容实验值用最小二乘法拟合得到摩尔热容 (C_p,m)对温度(T)的多项式方程, 并且在此基础上计算出了它的舒平热容值和各种热力学函数值. 依据Hess定律, 通过设计热化学循环, 选择体积为100 cm³、浓度为2 mol•L^－1的盐酸作为量热溶剂, 利用等温环境溶解-反应热量计, 测定和推算出该配合物的标准摩尔生成焓为Δ_fH_m⁰＝－(2069.30±0.74) kJ•mol^－1.     

稀土高氯酸盐-缬氨酸配合物[Sm2(L-α-Val)4(H2O)8](ClO4)6的低温热容和热化学研究

以高氯酸钐和缬氨酸为原料在蒸馏水中合成了一种稀土高氯酸盐-缬氨酸配合物[Sm₂(L-α-Val)₄(H₂O)₈](ClO₄)₆。利用TG/DTG、化学和元素分析、FTIR等技术表征了配合物的结构,确定其组成为：[Sm₂(L-α-Val)₄(H₂O)₈](ClO₄)₆。用精密绝热量热仪测量了它在78~371 K温区的热容,用最小二乘法将该温区的热容对温度进行拟合,得到了热容随温度变化的多项式方程。用此方程进行数值积分,得到每隔5 K的舒平热容值和相对于298.15 K的热力学函数值。根据TG/DTG结果,推测了该配合物的热分解机理。另外,依据Hess定律,通过设计合理的热化学循环,利用等温环境溶解-反应热量计分别测量量热反应的反应物和产物在所选溶剂中的溶解焓,从而确定反应的反应焓为：Δ_rH_m^?=(24.83±0.85) kJ·mol^-1。最后,利用反应的反应焓和其它反应物和产物已知的热力学数据计算出配合物的标准摩尔生成焓为：-(8 010.01± 3.90) kJ·mol^-1。     

配位化合物Zn(Met)3(NO3)2·H2O(s)(Met=L-α-蛋氨酸)的低温热容及标准摩尔生成焓

利用精密绝热热量仪测定了化合物配合物Zn(Met)₃(NO₃)₂·H₂O (s) (Met=L-α-蛋氨酸)在78-371 K温区的摩尔热容. 通过热容曲线解析, 得到了该配合物的起始脱水温度为T_D=325.10 K. 将该温区的摩尔热容实验值用最小二乘法拟合得到了摩尔热容(C_p)对约化温度(T)的多项式方程, 由此计算得到了配合物的舒平热容值和热力学函数值. 基于设计的热化学循环, 选择100 mL of 2 mol·L^-1 HCl为量热溶剂, 利用等温环境溶解-反应热量计, 得到了298.15 K配合物的标准摩尔生成焓为Δ_fH_m⁰[Zn(Met)₃(NO₃)₂·H₂O(s),s]=-(1472.65±0.76) J·mol^-1.     

Dy(Tyr)(Gly)3Cl3·3H2O的热化学和热分解动力学研究

以氯化镝、甘氨酸和L-酪氨酸为原料合成了配合物Dy(Tyr)(Gly)₃Cl₃·3H₂O. 用溶解-反应热量计测得配合物在298. 15K时的标准摩尔生成焓为–(4287. 10±2. 14) kJ / mol. 并用TG-DTG技术对配合物进行了非等温热分解动力学研究, 推断出配合物第二步热分解反应的动力学方程为: dα/dT＝3. 14 ×10²⁰ s^-1/βexp(-209. 37 kJ / mol /RT)(1-α)².     

稀土高氯酸盐-谷氨酸配合物[Pr2(L-α-Glu)2(ClO4)(H2O)7](ClO4)3•4H2O的低温热容和热化学研究

合成了一种稀土高氯酸盐-谷氨酸配合物. 经TG/DTG、化学和元素分析、FTIR及与相关文献对比, 确定其组成为[Pr₂(L-α-Glu)₂(ClO₄)(H₂O)₇](ClO₄)₃•4H₂O, 纯度为99.0%以上. 利用显微熔点仪分析发现其没有熔点. 在78～370 K温区, 用精密绝热量热仪测量其低温热容, 在285～306 K温区发现一明显吸热峰, 归结为固-固相变过程. 通过相变温区三次重复热容测量, 得到相变温度T_tr、相变焓Δ_trH_m和相变熵Δ_trS_m分别为(297.158±0.280) K, (12.338±0.016) kJ•mol^－1和(41.520±0.156) J•K^－1•mol^－1. 用最小二乘法将非相变温区的热容对温度进行拟合, 得到了热容随温度变化的两个多项式方程. 用此方程进行数值积分, 得到每隔5 K的舒平热容值和相对于273.15 K的热力学函数值. 根据TG/DTG结果, 推测了该配合物的热分解机理. 依据Hess定律, 选择1 mol•dm^－3盐酸为量热溶剂, 利用等温环境溶解-反应量热计, 测定了该配合物的标准摩尔生成焓为: Δ_fH_m⁰＝－(7223.1±2.4) kJ•mol^－1.     

稀土高氯酸盐-谷氨酸配合物[Pr2(L-α-Glu)2(ClO4)(H2O)7](ClO4)3•4H2O的低温热容和热化学研究

合成了一种稀土高氯酸盐-谷氨酸配合物. 经TG/DTG、化学和元素分析、FTIR及与相关文献对比, 确定其组成为[Pr₂(L-α-Glu)₂(ClO₄)(H₂O)₇](ClO₄)₃•4H₂O, 纯度为99.0%以上. 利用显微熔点仪分析发现其没有熔点. 在78～370 K温区, 用精密绝热量热仪测量其低温热容, 在285～306 K温区发现一明显吸热峰, 归结为固-固相变过程. 通过相变温区三次重复热容测量, 得到相变温度T_tr、相变焓Δ_trH_m和相变熵Δ_trS_m分别为(297.158±0.280) K, (12.338±0.016) kJ•mol^－1和(41.520±0.156) J•K^－1•mol^－1. 用最小二乘法将非相变温区的热容对温度进行拟合, 得到了热容随温度变化的两个多项式方程. 用此方程进行数值积分, 得到每隔5 K的舒平热容值和相对于273.15 K的热力学函数值. 根据TG/DTG结果, 推测了该配合物的热分解机理. 依据Hess定律, 选择1 mol•dm^－3盐酸为量热溶剂, 利用等温环境溶解-反应量热计, 测定了该配合物的标准摩尔生成焓为: Δ_fH_m⁰＝－(7223.1±2.4) kJ•mol^－1.     

腈菌唑的热容和热力学性质

通过小样品精密自动绝热热量计测定了自己合成并提纯的腈菌唑 (C₁₅H₁₇ClN₄) 在78 ～ 368K温区的低温摩尔热容。量热实验发现, 该化合物在363 ~ 372 K温区, 有一固-液熔化相变过程, 其熔化温度为 (348.800±0.06)K, 摩尔熔化焓、摩尔熔化熵及化合物的纯度分别为：(30931±11) J•mol^-1、(88.47±0.02) J•mol^-1•K^-1和0.9941(摩尔分数)。用差示扫描量热(DSC) 技术对该物质的固-液熔化过程作了进一步研究，结果与绝热量热法一致。     

Low‐Temperature Heat Capacities and Standard Molar Enthalpy of Formation of Gramine (C11H14N2)

Low‐temperature heat capacities of gramine (C₁₁H₁₄N₂) were measured by a precision automated adiabatic calorimeter over the temperature range from 78 to 401 K. A polynomial equation of heat capacities as a function of temperature was fitted by least squares method. Based on the fitted polynomial, the smoothed heat capacities and thermodynamic functions of the compound relative to the standard reference temperature 298.15 K were calculated and tabulated at 5 K intervals. The constant‐volume energy of combustion of the compound at T=298.15 K was measured by a precision oxygen‐bomb combustion calorimeter as Δ_cU=−(35336.7±13.9) J·g⁻¹. The standard molar enthalpy of combustion of the compound was determined to be Δ_cH_m⁰=−(6163.2±2.4) kJ·mol⁻¹, according to the definition of combustion enthalpy. Finally, the standard molar enthalpy of formation of the compound was calculated to be Δ;_cH_m⁰=−(166.2±2.8) kJ·mol⁻¹ in accordance with Hess law.     

Low-Temperature Heat Capacities and Thermodynamic Properties of Hydrated Nickel L-Threonate Ni（C4H7O5）2·2H2O（S）

Low-temperature heat capacities of the compound Ni（C4H7O5）2·2H2O（S） have been measured with an auto- mated adiabatic calorimeter. A thermal decomposition or dehydration occurred in 350--369 K. The temperature, the enthalpy and entropy of the dehydration were determined to be （368.141 ±0.095） K, （18.809±0.088） kJ·mol ^-1 and （51.093±0.239） J·K^-1·mol^-1 respertively. The experimental values of the molar heat capacities in the temperature regions of 78-350 and 368-390 K were fitted to two polynomial equations of heat capacities （Cp,m） with the reduced temperatures （X）, [X=f（T）], by a least squares method, respectively. The smoothed molar heat capacities and thermodynamic functions of the compound were calculated on the basis of the fitted polynomials. The smoothed values of the molar heat capacities and fundamental thermodynamic functions of the sample relative to the standard reference temperature 298.15 K were tabulated with an interval of 5 K.     

4-硝基苯甲醇的低温热容和标准摩尔生成焓

用精密自动绝热量热计测定了4-硝基苯甲醇（4-NBA）在78 ~ 396 K温区的摩尔热容。其熔化温度、摩尔熔化焓及摩尔熔化熵分别为:(336.426 ± 0.088) K, (20.97 ± 0.13) kJ×mol-1 和 (57.24 ± 0.36) J×K-1×mol-1.根据热力学函数关系式,从热容值计算出了该物质在80 ~ 400 K温区的热力学函数值 [HT - H298.15 K] 和[ST - S298.15 K]. 用精密氧弹燃烧量热计测定了该物质在T＝298.15 K的恒容燃烧能和标准摩尔燃烧焓分别为 (C7H7NO3, s)＝- ( 3549.11 ± 1.47 ) kJ×mol-1 和 (C7H7NO3, s)＝- ( 3548.49 ± 1.47 ) kJ×mol-1. 利用标准摩尔燃烧焓和其他辅助热力学数据通过盖斯热化学循环, 计算出了该物质标准摩尔生成焓 (C7H7NO3, s)＝- (206.49 ± 2.52) kJ×mol-1 .     

Thermochemical Study on [La(Hsal)2•(tch)]•2H2O [Hsal＝salicylate ( ), tch＝thioprolinate (C4H6NO2S-)]

The product from reaction of lanthanum chloride heptahydrate with salicylic acid and thioproline, [La(Hsal)2•(tch)]•2H2O, was synthesized and characterized by IR, elemental analysis, molar conductance, thermogravimatric analysis and chemistry analysis. The standard molar enthalpies of solution of LaCl3•7H2O (s), [2C7H6O3 (s)], C4H7NO2S (s) and [La(Hsal)2•(tch)]•2H2O (s) in a mixed solvent of absolute ethyl alcohol, dimethyl sulfoxide (DMSO) and 3 mol•L－1 HCl were determined by calorimetry to be [LaCl3•7H2O (s), 298.15 K]＝(－102.36±0.66) kJ•mol－1, [2C7H6O3 (s), 298.15 K]＝(26.65±0.22) kJ•mol－1, [C4H7NO2S (s), 298.15 K]＝(－21.79±0.35) kJ•mol－1 and {[La(Hsal)2•(tch)]•2H2O (s), 298.15 K}＝(－41.10±0.32) kJ•mol－1. The enthalpy change of the reaction LaCl3•7H2O (s)＋2C7H6O3 (s)＋C4H7NO2S (s)＝[La(Hsal)2•(tch)]•2H2O (s)＋3HCl (g)＋5H2O (l) (Eq. 1) was determined to be ＝(41.02±0.85) kJ•mol－1. From date in the literature, through Hess’ law, the standard molar enthalpy of formation of [La(Hsal)2•(tch)]•2H2O (s) was estimated to be {[La(Hsal)2•(tch)]•2H2O (s), 298.15 K}＝(－3017.0±3.7) kJ•mol－1.     

水合烟酸铜Cu(Nic)2•H2O(s)(Nic＝烟酸)的合成、表征及热力学性质

近几十年来,烟酸盐类化合物或配合物由于优越的吸收率高和无毒副作用等特点使其在化妆品、药品和食品等领域作为营养添加剂具有重要应用前景。然而,这类化合物的基础热力学数据极其缺乏,从而限制了这类化合物的理论研究和应用开发的深入开展。为此,本论文利用室温固相合成方法和球磨技术合成了一种新化合物Cu(Nic)2•H2O(s),利用化学分析、元素分析、FTIR和X-射线粉末衍射技术表征了它的结构和组成,利用精密自动绝热热量计准确地测量了它在78-400 K温区的摩尔热容。在热容曲线的T ＝ 326-346 K温区观察到一个明显的固-液相变过程。利用相变温区三次重复实验热容的测量结果确定了此相变过程的峰温、相变焓和相变熵分别为：Tfus＝(341.290 ±0.873) K, DfusHm＝(13.582±0.012) kJ×mol-1, DfusSm＝(39.797±0.067) J×K-1×mol-1。通过最小二乘法将相变前和相变后的热容实验值分别拟合成了热容对温度的两个多项式方程。通过热容多项式方程的数值积分,得到了这个化合物的舒平热容值和相对于298.15 K的各种热力学函数值,并且将每隔5 K的热力学函数值列成了表格。     

Thermochemistry on the Complex of Erbium Perchlorate with L-α-Glutamic Acid [Er2（L-Glu）2（H2O）6]（ClO4）4·6H2O（s）

A coordination compound of erbium perchlorate with L-α-glutamic acid, [Er2（Glu）2（H2O）6]（ClO4）4·6H2O（s）, was synthesized. By chemical analysis, elemental analysis, FTIR, TG/DTG, and comparison with relevant literatures, its chemical composition and structure were established. The mechanism of thermal decomposition of the complex was deduced on the basis of the TG/DTG analysis. Low-temperature heat capacities were measured by a precision automated adiabatic calorimeter from 78 to 318 K. An endothermic peak in the heat capacity curve was observed over the temperature region of 290-318 K, which was ascribed to a solid-to-solid phase transition. The temperature Ttrans, the enthalpy △transHm and the entropy △transSm of the phase transition for the compound were determined to be： （308.73±0.45） K, （10.49±0.05） kJ·mol^-1 and （33.9±0.2） J·K^-1·mol^-1. Polynomial equation of heat capacities as a function of the temperature in the region of 78-290 K was fitted by the least square method. Standard molar enthalpies of dissolution of the mixture [2ErCl3·6H2O（s）＋2L-Glu（s）＋6NaClO4·H2O（s）] and the mixture {[Er2（Glu）2（H2O）6]（ClO4）4·6H2O（s）＋6NaCl（s）} in 100 mL of 2 mol·dm^-3 HClO4 as calorimetric solvent, and {2HClO4（1）} in the solution A＇ at T=298.15 K were measured to be, △dHm,1=（31.552±0.026） kJ·mol^-1, △dHm,2 = （41.302±0.034） kJ·mol^-1, and △dHm,3 = （ 14.986 ± 0.064） kJ·mol^-1, respectively. In accordance with Hess law, the standard molar enthalpy of formation of the complex was determined as △fHm-=-（7551.0±2.4） kJ·mol^-1 by using an isoperibol solution-reaction calorimeter and designing a thermochemical cycle.     

对氨基苯甲酸热力学性质的量热和热分析研究

在80～400 K温区,用高精度全自动绝热量热仪测定了对氨基苯甲酸摩尔热容,得到摩尔热容随温度的变化的关系式为：     

Low-Temperature Heat Capacities and Thermodynamic Properties of Octahydrated Barium Dihydroxide,Ba（OH）2·8H2O（s）

Low-temperature heat capacities of octahydrated barium dihydroxide, Ba（OH）2·8H2O（s）, were measured by a precision automated adiabatic calorimeter in the temperature range from T=78 to 370 K. An obvious endothermic process took place in the temperature range of 345-356 K. The peak in the heat capacity curve was correspondent to the sum of both the fusion and the first thermal decomposition or dehydration. The experimental molar heat capacifies in the temperature ranges of 78-345 K and 356-369 K were fitted to two polynomials. The peak temperature, molar enthalpy and entropy of the phase change have been determined to be （355.007±0.076） K, （73.506±0.011） kJ·ol^-1 and （207.140±0.074） J·K^-1·mol^-1, respectively, by three series of repeated heat capacity measurements in the temperature region of 298-370 K. The thermodynamic functions, （Hr-H298.15 k ）and （Sr-S298.15k）, of the compound have been calculated by the numerical integral of the two heat-eapacity polynomials. In addition, DSC and TG-DTG techniques were used for the further study of thermal behavior of the compound. The latent heat of the phase change became into a value larger than that of the normal compound because the melfing process of the compound must be accompanied by the thermal decomposition or dehydration of 71-120.     

Synthesis,Characterization and Thermodynamic Study of the Solid State Coordination Compound Ni(Nic)2·H2O(s)(Nic=Nicotinate)

A novel compound‐monohydrated nickel nicotinate was synthesized by the method of room temperature solid phase synthesis and ball grinder. FTIR, chemical and elemental analysis, TG/DTG, and X‐ray powder diffraction technique were applied to characterize the structure and composition of the coordination compound. Low‐temperature heat capacities of the solid coordination compound have been measured by a precision automated adiabatic calorimeter over the temperature range from 78 to 386 K. A solid‐solid phase transition occurred in the temperature range of 328–358 K in the heat capacity curve, and the peak temperature, the molar enthalpy and molar entropy of the phase transition were determined to be T_trs=(356.759±0.697) K, Δ_trsH_m=(13.650±0.408) kJ· mol^?1, and Δ_trsS_m= (38.279±0.086) J·K^?1·mol^?1, respectively. The experimental values of the molar heat capacities in the temperature ranges of 78–328 K and 358–386 K were fitted to two polynomials, respectively. The polynomial fitted values of the molar heat capacities and fundamental thermodynamic functions of the sample relative to the standard reference temperature 298.15 K were calculated and tabulated at the intervals of 5 K.