Nanomolar detection limit for determination of norepinephrine in the presence of acetaminophen and tryptophan using carbon nanotube-based electrochemical sensor

A carbon paste electrode modified by carbon nanotubes and a synthesized hydroquinone derivative (abbreviated as DHB) was fabricated. It was used as an electrochemical sensor for simultaneous determination of norepinephrine (NE), acetaminophen (AC), and tryptophan (Trp). Oxidation potential of NE decreased about 220 mV at the modified electrode in comparison with unmodified electrode because of electrocatalysis of oxidation of NE via E? mechanism at the modified electrode. Differential pulse voltammetry was used for obtaining the calibration plot of NE and two linear range of 0.2–20.0 μM and 20.0–1,500.0 μM and an interesting detection limit (3σ) of 40.0 nM were obtained for NE. Also, simultaneous determination of NE, AC, and Trp was described by the proposed sensor and linear range of 20.0–800.0 μM was found for AC and Trp. Finally, the electrochemical sensor was used for the determination of NE, AC, and Trp in mixture.     

Hydrothermal synthesis of one-dimensional assemblies of Pt nanoparticles and their sensor application for simultaneous determination of dopamine and ascorbic acid

One-dimensional assemblies of Pt nanoparticles (NPs) with the size range of 10–20 nm have been synthesized via a simple hydrothermal route using soluble starch as both template and reducing agent. The formation mechanism of the product was studied in details. The electrochemical behavior of dopamine (DA) and ascorbic acid (AA) on the prepared one-dimensionally assembled Pt NPs modified glassy carbon electrode were studied by cyclic voltammetry (CV) and differential pulse voltammetry (DPV) techniques and showed satisfactory results for the simultaneous determination of DA and AA by resolving the overlapping voltammetric responses of DA and AA into two voltammetric peaks.

     

Selective and sensitive determination of dopamine via suppressing ascorbic acid using an N-(1-H-indole-3yl) methylene thiazole-2-amine thin film-modified glassy carbon electrode

The selective determination of dopamine (DA) was performed using a glassy carbon (GC) electrode modified with N-(1-H-indole-3yl) methylene thiazole-2-amine (IMT2A). IMT2A was deposited on the GC electrode by cyclic voltammetry. This modified electrode demonstrated an electrocatalytic effect on the oxidation of DA in the presence of uric acid (UA) and ascorbic acid (AA) using differential pulse voltammetry (DPV) method in 0.1 M phosphate buffer solution (PBS) of pH 7. Selective determination was realized in elimination of AA response on the IMT2A-modified electrode. The oxidation peak currents increased linearly with two concentration intervals of DA at pH 7 phosphate buffer. One of them is 0.25–9.15 μM, and the other is 9.15–95.1 μM. The limit of detection (LOD) was found as 0.086 μM. The proposed electrode was applied to the determination of DA in pharmaceutical preparations and human urine sample with satisfactory results.

     

Voltammetric sensor for simultaneous determination of ascorbic acid,acetaminophen, and tryptophan in pharmaceutical products

A novel carbon paste electrode modified with carbon nanotubes and 5-amino-2′-ethyl -biphenyl-2-ol was fabricated. The electrochemical study of the modified electrode, as well as its efficiency for electrocatalytic oxidation of ascorbic acid (AA), is described. The electrode was employed to study the electrocatalytic oxidation of AA, using cyclic voltammetry, chronoamperometry, and square-wave voltammetry (SWV) as diagnostic techniques. It has been found that the oxidation of AA at the surface of modified electrode occurs at a potential of about 250 mV less positive than that of an unmodified carbon paste electrode. SWV exhibits a linear dynamic range from 2.0?×?10^?7 to 5.0?×?10^?4 M and a detection limit of 1.0?×?10^?7 M for AA. In addition, this modified electrode was used for simultaneous determination of AA, acetaminophen (AC), and tryptophan (TRP). Finally, the modified electrode was used for determination of AA, AC, and TRP in pharmaceutical products.     

Voltammetric determination of uric acid in the presence of ascorbic acid and dopamine using chitosan/ionic liquid composite electrode

A chitosan/ionic liquid composite electrode was prepared and used to determine uric acid (UA) in the presence of a large excess of ascorbic acid (AA) and dopamine (DA) by linear sweep voltammetry (LSV). The modified electrode shows large peak separations between DA, AA, and UA. Due to the existence of chitosan and ionic liquid in the composite, the modified electrode exhibits strong electrochemical catalytic activity toward the oxidation of UA. Under optimal conditions, the peak current is linearly dependent on the UA concentration in the range of 5?×?10^?7–2?×?10^?4 M in the presence of 5?×?10^?4 M AA and 5?×?10^?5 M DA with a correlation coefficient of 0.9978, and the detection limit is 5?×?10^?8 M at a signal-to-noise ratio of 3. With good sensitivity and stability, the constructed sensor was applied in the determination of UA in human serum samples and satisfactory results were obtained.     

Electrochemical and catalytic investigations of epinephrine,acetaminophen and folic acid at the surface of titanium dioxide nanoparticle-modified carbon paste electrode

In the present paper, the use of a carbon paste electrode modified with 1-(4-(1, 3-dithiolan-2-yl)-6, 7-dihydroxy-2-methyl-6, 7-dihydrobenzofuran-3-yl)ethanone (DDE) and TiO₂ nanoparticles prepared by a simple and rapid method was described. The modified electrode showed excellent properties for electrocatalytic oxidization of epinephrine (EP), acetaminophen (AC) and folic acid (FA). The apparent charge transfer rate constant, k _s?=?1.14 s^?1, and transfer coefficient, α?=?0.54, for electron transfer between the modifier and carbon paste electrode were calculated. It has been found that under optimum condition (pH?=?7.0) in cyclic voltammetry, the oxidation of EP occurs at a potential about 280 mV less positive than that of an unmodified carbon paste electrode. The values of transfer coefficients (α?=?0.46), catalytic rate constant (k?=?1.2?×?10⁴ M^?1 s^?1) and diffusion coefficient (D?=?2.70?×?10^?5 cm² s^?1) were calculated for EP. Differential pulse voltammetry (DPV) exhibited two linear dynamic ranges of 0.5 to 50.0 μM and 50.0 to 1,000 μM for EP. This modified electrode is quite effective not only for the detection of EP, AC and FA but also for the simultaneous determination of these species in a mixture. The limit of detection for EP, AC and FA is 0.10, 1.80 and 2.36 μM, respectively.     

New voltammetric strategy for simultaneous determination of norepinephrine, acetaminophen, and folic acid using a 5-amino-3′,4′-dimethoxy-biphenyl-2-ol/carbon nanotube paste electrode

A carbon paste electrode modified with 5-amino-3??,4??-dimethoxy-biphenyl-2-ol and carbon nanotubes was used for the sensitive voltammetric determination of norepinephrine (NE). The electrochemical response characteristics of the modified electrode toward NE, acetaminophen (AC), and folic acid (FA) were investigated by cyclic and square wave voltammetry (SWV). The results show an efficient catalytic activity of the electrode for the electrooxidation of NE, which leads to lowering its overpotential more than 160?mV. The modified electrode exhibits an efficient electron-mediating behavior together with well-separated oxidation peaks for NE, AC, and FA. Under the optimum pH of 7.0 in 0.1?M phosphate buffer solution, the SWV anodic peak current showed a linear relation vs. NE concentration in the range of 15.0 to 1,000.0???M with a detection limit of 8.0???M.     

Highly sensitive electrochemical detection of dopamine and uric acid on a novel carbon nanotube-modified ionic liquid-nanozeolite paste electrode

A novel biosensor has been constructed by incorporating modified nanosized natural zeolite and 3-hydroxypropanaminium acetate (HPAA) as a novel room temperature ionic liquid, supported on multiwalled carbon nanotube (MWCNTs) and employed for the simultaneous determination of dopamine (DA) and uric acid (UA). A detailed investigation by transmission electron microscopy and electrochemistry is performed in order to elucidate the preparation process and properties of the composites. The voltammetric studies using the modified carbon paste electrode show two well-resolved anodic peaks for DA and UA with a potential difference of 160 mV, revealing the possibility of the simultaneous electrochemical detection of these compounds. The modified carbon paste electrode shows good conductivity, stability, and extraction effect due to the synergic action of HPAA, MWCNTs, and iron ion-doped natrolite zeolite. Under optimized conditions, the peak currents are linear from 8.12?×?10^?7 to 3.01?×?10^?4?mol?L^?1 and from 9.31?×?10^?7 to 3.36?×?10^?4?mol?L^?1 with detection limits of 1.16?×?10^?7 and 1.33?×?10^?7?mol?L^?1 for DA and UA using the differential pulse voltammetric method, respectively. Finally, the modified carbon paste electrode proved to have good sensitivity and stability and is successfully applied for the simultaneous determination of DA and UA in human blood serum and urine samples.     

Preparation and physical/electrochemical characterization of carbon nanotube-chitosan modified pencil graphite electrode

In this work, preparation and characterization of single-walled carbon nanotube-chitosan (SWNT-chitosan) modified disposable pencil graphite electrode (PGE) was carried out. Firstly, commercial single-walled carbon nanotube was purified and characterized using thermal gravimetric analysis (TGA), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM) and energy dispersive analysis of X-ray (EDX) for this purpose. Purified SWNT was mixed with chitosan polymer for preparing their composite. Then, PGE was modified with this composite. The characterization of the modified electrode was carried out using atomic force microscopy (AFM). The electrochemical behaviour of the obtained electrode was investigated and compared with the electrochemical behaviour of chitosan modified and unmodified PGEs using cyclic voltammetry (CV), differential pulse voltammetry (DPV) and alternative current (AC) impedance spectroscopy. In order to obtain more sensitive electrochemical signals, the effect of SWNT concentration was studied. This modified electrode also showed electrocatalytic effect for hydrogen evolution.     

Developing a sensor for the simultaneous determination of adrenaline,uric acid,and tryptophan

A chemically modified electrode is constructed based on a coumestan derivative and multiwall carbon nanotubes modified carbon paste electrode (CMWCNT-CPE). The surface charge transfer rate constant, k _s, and the charge transfer coefficient, α, for the electron transfer between coumestan and MWCNT-CPE were estimated. CMWCNT-CPE presents a highly catalytic activity for adrenaline (AD) electrooxidation. The results show that the peak potential of AD at the CMWCNT-CPE surface shifted by about 145 mV toward negative values compared with that at the MWCNT-CPE surface. Differential pulse voltammetry exhibited three linear ranges and a detection limit of 0.2 μM for AD. For a mixture containing AD, uric acid (UA), and tryptophan (Trp), three signals corresponding to the analytes could well separate them from each other. Moreover, CMWCNT-CPE was used to determine AD in an adrenaline injection solution and UA in a human urine sample with satisfactory results. To confirm the proposed method, the AD injection solution and the urine sample were spiked with different certain amounts of AD, UA, and Trp.     

A voltammetric sensor based on GO–MWNTs hybrid nanomaterial-modified electrode for determination of carbendazim in soil and water samples

A voltammetric sensor for the determination of carbendazim was developed at a glassy carbon electrode modified with a hybrid nanomaterial (graphene oxide–multi-walled nanotubes/glassy carbon (GO–MWNTs/GC)). Its surface electrochemical property was studied with UV–Vis spectroscopy, TEM analysis, and electrochemical impedance spectroscopy. The electrochemical behavior of carbendazim was investigated on the modified electrode with cyclic voltammetry and differential pulse voltammetry. The influence of modifier dosage, buffer solution, pH, accumulation time, and scan rates on the determination was discussed. The results indicated that the reaction of carbendazim on the electrode was controlled by diffusion and was an irreversible process with two electrons. The effective area of GO–MWNTs/GC, anodic transfer coefficient, and apparent diffusion coefficient were calculated. The anodic peak current of carbendazim was linear with the concentration of carbendazim from 10 nM to 4 μM with a detection limit of 5 nM (S/N?=?3). The proposed sensor was successfully applied to the determination of carbendazim in soil and tap water.     

Selective determination of catecholamine in the presence of ascorbic acid or uric acid on the membrane of silver nanoparticles/poly l-phenylalanine

The silver ions and l-phenylalanine were co-deposited and formed a hybrid membrane on the surface of glassy carbon electrode by cyclic voltammetry. The membrane had good properties for catalyzing the redox of catecholamine neurotransmitters, including epinephrine (EP), norepinephrine (NE), and dopamine (DA). The electrochemical behaviors of these neurotransmitters were studied on this modified electrode. and therefore, an assay for each of them is set up and the detection limits for EP, NE, and DA are 7.2?×?10^?9, 6.4?×?10^?9, and 8.5?×?10^?9 mol L^?1, respectively. The proposed method can effectively eliminate the interference of the ascorbic acid and uric acid. The conditions which influenced the analyses were optimized. Using this method to determine the content of EP, NE, and DA in injections, the results were satisfactory.     

Ultrasound-assisted synthesis of 3D flower-like zinc oxide decorated fMWCNTs for sensitive detection of toxic environmental pollutant 4-nitrophenol

Sonochemical synthesis of functionalized multi-walled carbon nanotubes (fMWCNTs) embellished 3D flower-like zinc oxide (ZnO) nanocomposite based novel electrochemical sensor for the detection of toxic environmental pollutant 4-nitrophenol (4-NP) is detailed in this paper. We have used laser-assisted synthesis technique in the development of 3D flower-like ZnO nanoparticles (NPs) and ultrasonication method was employed in preparation of ZnO NPs@fMWCNTs nanocomposite using a high-intensity ultrasonic bath DC200H with power of 200 W/cm² and 40 KHz frequency. The nanocomposite was meticulously fabricated on screen printed carbon electrode (SPCE) to carry out various electrochemical analysis. Different characterizations such as Raman spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, UV visible spectroscopy (UV–Vis), X-ray diffraction (XRD), scanning electron microscopy (SEM), and high-resolution transmission electron microscopy (HRTEM) of the materials used in this work were taken. Cyclic voltammetry (CV) and differential pulse voltammetry (DPV) techniques are used in electrochemical investigations. We have observed well-defined oxidation and reduction peak currents representing electrochemical mechanism of 4-NP at very low potentials for ZnO NPs@fMWCNTs/SPCE. Furthermore, we were able to achieve efficient electrochemical determination of 4-NP using the developed sensor with a high sensitivity of 11.44 μA μM⁻¹ cm⁻² and very low detection limit (LOD) of 0.013 μM in a broad linear range of 0.06–100 μM. All the significant features of a good sensor including anti-interference, good stability, excellent repeatability, and reproducibility were exhibited by the sensor. Moreover, we have tested practical feasibility of sensor by carrying out real sample analysis on different water samples.     

Synthesis and electrochemical characterization of nitrogen-doped and nitrogen–phosphorus-doped multi-walled carbon nanotubes

Nitrogen-doped and nitrogen–phosphorus-doped multi-walled carbon nanotubes (N-MWCNTs and N–P-MWCNTs, respectively) were fabricated by chemical vapor deposition and characterized using scanning electron microscopy and transmission electron microscopy in combination with energy dispersive X-ray spectroscopy and Raman spectroscopy. The electrochemical response of N-MWCNTs and N–P-MWCNTs towards ferrocyanide/ferricyanide was initially studied. The findings exhibit weakening of electrochemical response and sensitivity of nanotubes with phosphorus doping, and thus, within the composite films tested, those consist exclusively of N-MWCNTs exhibit the greatest electrocatalytic activity. N–P-MWCNT film was further applied for individual electrochemical analysis of ascorbic acid (AA), uric acid (UA), and dopamine (DA), and lower limits of detections of 11.6, 7.8, and 1.9 μM were estimated, respectively. The findings demonstrate that AA does not interfere with UA, but considerable interference of AA in analysis of DA was observed. Thus, the simultaneous analysis of AA, UA, and DA on N–P-MWCNTs appears to be restricted.     

Electrocatalytic oxidation of <Emphasis Type="SmallCaps">l</Emphasis>-tyrosine at carboxylic acid functionalized multi-walled carbon nanotubes modified carbon paste electrode

The electrocatalytic oxidation of l-tyrosine (Tyr) was investigated on a carboxylic acid functionalised multi-walled carbon nanotubes modified carbon paste electrode using cyclic voltammetry and amperometry. The surface morphology of the electrodes was studied using field emission (FE)-SEM images, and the interface properties of bare and modified electrodes were investigated by electrochemical impedance spectroscopy (EIS). The influence of the amount of modifier loading and the variation of the pH of the solution on the electrochemical parameters have been investigated. Cyclic voltammetry was carried out to study the electrochemical oxidation mechanism of Tyr, which showed an irreversible oxidation process at a potential of 637.0 mV at modified electrode. The anodic peak current linearly increased with the scan rate, suggesting that the oxidation of Tyr at modified electrode is an adsorption-controlled process. A good linear relationship between the oxidation peak current and the Tyr concentration in the range of 0.8–100.0 μM was obtained in a phosphate buffer solution at pH 7.0 with a detection limit of 14.0?±?1.36 nM (S/N?=?3). The practical utility of the sensor was demonstrated by determining Tyr in spiked cow’s milk and human blood serum. The modified electrode showed excellent reproducibility, long-term stability and antifouling effects.     

Electrocatalytic determination of sulfite using a modified carbon nanotubes paste electrode: application for determination of sulfite in real samples

This paper introduces a carbon paste electrode modified with ferrocene and carbon nanotubes as a voltammetric sensor for determination of sulfite at pH 7.0. The results showed that under the optimum condition (pH 7.0) in cyclic voltammetry, the oxidation of sulfite occurred at a potential about 280?mV less positive than the unmodified carbon paste electrode. Kinetic parameters such as electron transfer coefficient (??) and heterogeneous rate constant (k) for sulfite were also determined using electrochemical approaches. Under the optimized conditions, the electrocatalytic oxidation peak current of sulfite showed two linear dynamic ranges with a detection limit of 0.1???M for sulfite. The proposed method was examined as a selective, simple, and precise method for voltammetric determination of sulfite in some real samples such as weak liquor from wood and paper industry, boiler water, river water, industrial water, and tap water.     

Novel nanostructured electrochemical sensor for voltammetric determination of N-acetylcysteine in the presence of high concentrations of tryptophan

A carbon paste electrode chemically modified with multiwall nanotubes and ethynylferrocene (ETFc) was used as a selective and sensitive electrochemical sensor for the determination of minor amounts of N-acetylcysteine (N-AC) in the presence of a high concentration of tryptophan (Trp). Square wave voltammetry (SWV) of N-AC at the modified electrode exhibited linear dynamic range with a detection limit (3 s) of 0.08 μmol?L^?1. The separations of anodic peak potentials of N-AC and Trp reached 400 mV using SWV. With good selectivity and sensitivity, the present method provides a simple method for selective detection of N-AC in real samples such as drug and urine.     

Electrochemical analysis of gold-coated magnetic nanoparticles for detecting immunological interaction

An electrochemical impedance immunosensor was developed for detecting the immunological interaction between human immunoglobulin (IgG) and protein A from Staphylococcus aureus based on the immobilization of human IgG on the surface of modified gold-coated magnetic nanoparticles. The nanoparticles with an Au shell and Fe oxide cores were functionalized by a self-assembled monolayer of 11-mercaptoundecanoic acid. The electrochemical analysis was conducted on the modified magnetic carbon paste electrodes with the nanoparticles. The magnetic nanoparticles were attached to the surface of the magnetic carbon paste electrodes via magnetic force. The cyclic voltammetry technique and electrochemical impedance spectroscopy measurements of the magnetic carbon paste electrodes coated with magnetic nanoparticles–human IgG complex showed changes in its alternating current (AC) response both after the modification of the surface of the electrode and the addition of protein A. The immunological interaction between human IgG on the surface of the modified magnetic carbon paste electrodes and protein A in the solution could be successfully monitored.     

聚茜素红S功能化碳纳米管修饰电极测定水中的对苯二酚

通过电聚合制备了聚茜素红S-多壁碳纳米管修饰丝网印刷电极,用于水中对苯二酚的测定。考察了对苯二酚在修饰电极上的电化学行为。该修饰电极对对苯二酚的氧化还原反应具有明显的电催化作用。用示差脉冲伏安法测定了水中对苯二酚的含量,其氧化峰电流在5.02×10-5—1.52×10-3m ol/L浓度范围内呈良好的线性关系,检出限为2.37×1-0 5m ol/L,加样回收率在98.1%—106.9%之间。所制备的修饰电极可应用于水中对苯二酚的现场快速检测。     

Layered nanocomposite of zinc sulfide covered reduced graphene oxide and their implications for electrocatalytic applications

Herein, we have synthesized zinc sulfide nanospheres (ZnS NPs) encapsulated on reduced graphene oxide (RGO) hybrid by an ultrasonic bath (50 kHz/60 W). The physical and structural properties of ZnS NPs@RGO hybrid were analyzed by TEM, XRD, EIS and EDS. As-prepared ZnS NPs@RGO hybrid was applied towards the electrochemical determination of caffeic acid (CA) in various food samples. The ZnS NPs@RGO hybrid modified electrode (GCE) exhibited an excellent electrocatalytic performance towards caffeic acid detection and determination, when compared to other modified electrodes. Therefore, the electrochemical sensing performance of the fabricated and nanocomposite modified electrode was significantly improved owing to the synergistic effect of ZnS NPs and RGO catalyst. Furthermore, the hybrid materials provide highly active electro-sites as well as rapid electron transport pathways. The proposed electrochemical caffeic acid sensor produces a wide linear range of 0.015–671.7 µM with a nanomolar level detection limit (3.29 nM). In addition, the real sample analysis of the proposed sensor has applied to the determination of caffeic acid in various food samples.