新型镍催化体系合成Cis-1,4聚丁二烯的研究

本文研究了以加氢汽油为溶剂的Ni(Naph)_2-Al(i-Bu)_2OR-BP_3·OEt_2及Ni(NaPh)_2-Al(i-Bu)_2OAr-BF3·OEt_2两体系对丁二烯的催化聚合活性、聚合物分子量、微观结构等。各种Al(i-Bu)_2OR或Al(i-Bu)_2OAr为助催化剂组成的新型镍催化体系对丁二烯聚合都有较高的催化活性,所得聚合物Cis-1,4含量在96％以上。磁化率和紫外可见光谱研究证明,在Al(i-Bu)_2OR体系中以Ni(Ⅰ)为主及小量未还原的Ni(Ⅱ);Al(i-Bu)_2OAr中Ni(Ⅰ)及Ni(O)共存。     

低温基体隔离Mn_1(CO)_(10)的紫外激光光解

采用280nm和355nm的脉冲激光作光解光源,由FTIR进行初级产物探测,研究了Mn_2(CO)_(10)在低温基体隔离条件下的光解反应.结果表明,在Ar基体中,Mn_2(CO)_(10)经280nm激光光解的初级产物主要是Mn_2(CO)_9;而在Xe基体中还观察到了Mn(CO)_5的生成;与280nm激光相比,采用355nm激光光解Mn_2(CO)_(10),Mn_2(CO)_9的产率较低.     

中性配合物Cr(acac)_3、mer-和fac-[Cr(bza)_3]的光学拆分

本文用新方法合成了Cr(bza)_3,改进了其mer-、fac-异构体的分离方法;增大了Cr(acac)_3的化学拆分量(1.5g)。试制了DBT(二苯甲酰-d-酒石酸)吸附型手性固定相(CSP),并成功地用于色谱拆分标题配合物的对映体,mer-[Cr(bza)_3]的部分拆分是首次发现的,其他配合物的拆分结果均优于文献方法。根据mer-[Cr(bza)_3)拆分流出液前、后组分的CD光谱,指定了其对映体绝对构型。还讨论了DBT吸附型CSP的拆分效能和色谱特性。     

20α-羟基孕酮对土拨鼠肾上腺微粒体甾体羟基化反应的抑制作用

本文研究了20α-羟基孕酮对土拨鼠肾上腺微粒体P-450催化甾体羟基化的抑制作用。探明了17α-羟基孕酮作底物时,20α-羟基孕酮对P-450_(C_(21))催化的C_(21)羟基化反应及P-450_(17αlyase)催化的C_(17)—C_(20)键断裂的反应均表现出拮抗抑制。抑制常数分别为1.73μmol/L(P-450_(C_(21)))和1.37μmol/L(P-450_(17lyase))。比较了分别以孕酮和17α-羟基孕酮作底物时,20α-羟基孕酮对P-450_(17αlyase)催化C_(17)—C_(20)键断裂的不同影响,由此推论出雄甾烷二酮在肾上腺微粒体中生成的连续反应机理。     

Inhibitory Effects of 20α-Hydroxyprogesterone on Steroid Hydroxylation Reactions of Guinea Pig Adrenal Microsomes

Using guinea pig andrenal microsomes, we studied the inhibitory effects of 20α-hydroxyprogesterone on steroid hydroxylation reactions catalyzed by cytochromes P-450. When 17α-hydroxyprogesterone was used as a substrate, 20α-hydroxyprogesterone functioned as a competitive inhibitor on the C_(17)—C_(20) bond cleavage reaction of P-450_(17α lyase). The inhibition constant, K_i was 1.37 μmol/L. 20α-hydroxyprogesterone also competitively inhibited the convertion of 17α-bydroxyprogesterone to 11-deoxycortisol by the action of P-450_(c21). The value of K_i was 1.73μmol/L. When progesterone was used as a substrate, 20α-hydroxyprogesterone inhibited neither the 21-hydroxylation of P-450_(c21). the C_(17)—C_(20) bond cleavage, nor 17α-hydroxylation of P-450_(17α lyase). Based on the seresults, we can deduce that the production of androstenedione from progesterone by the action of P-450_(17α lyase) proceeds through a successive monooxygenase reaction.     

若干μ_3-氧桥三核锰(Ⅲ)Schiff碱配合物的研究

用元素分析、电导率、磁化率、热分析、红外光谱和电子光谱等方法对新合成的7种μ_3-氧桥三核锰(Ⅲ)Schiff碱配合物:Mn_3O(bzaea)_2(C_2H_3O_2)_3、Mn_3O(bzaea)_2(C_2H_3O_2)_2(NCS)、Mn_3O(bzaea)_3ClO_4·2H_2O、Mn_3O(bzaea)_2(C_2H_3O_2)_2Br、Mn_3O(bzaea)_3I·2H_2O、Mn_3O(bzaea)_2(C_2H_3O_2)_2NO_3和Mn_3O(bzaea)_2(C_2H_3O_2)_2BPh_4·3H_2O(其中bzaea~(2-)是三齿Schiff碱2-(β-羟基乙基-亚胺)-4-苯基-丁酮(4)的负二价阴离子)进行了研究,并提出了配合物的可能构型。     

金属硫氰酸根配合物FeHg(SCN)_4,MnHg(SCN)_4的合成、晶体结构与非线性光学性质的研究

合成了配合物晶体FeHg(SCN)_4和MnHg(SCN)_4用单晶X射线衍射方法测定了这两个晶体的结构.以尿素为标准样品用粉末晶体倍频1064nm的Nd:YAG激光,测得其倍频光强度分别为:FeHg(SCN)_4,0.6倍于尿素;MnHg(SCN)_4,50倍于尿素.后者显示了作为新的非线性光学材料的发展前景.     

含弱金属-金属键体系[M_2(η~5-C_5H_5)_2(CO)_4](M=Fe,Ru)及其相关体系的电子光谱

用INDO/CI法研究了[M_2(η~5-C_5H_5)_2(CO)_4]及M(η~5-C_5H_5)(CO)_2Cl(M=Fe,Ru)体系的电子光谱,讨论了谱带的跃迁机理、电荷转移性质及同一标号谱带的蓝移现象,并对[MC_p(CO)_2]_2体系的异构化反应性及光化学反应的可能机理进行了探讨。     

2,5-巯基-1,3,4-硫代二氮唑自组装金电极测定银(I)

制备了2,5-巯基-1,3,4-硫代二氮唑(DMTD)自组装单分子层修饰金电极,用电化学阻抗谱进行了表征,研究了Ag(I)在该电极上的电化学行为并用差分脉冲阳极溶出伏安法对其进行了测定。结果表明,DMTD/Au电极能显著提高Ag(I)测定的灵敏度和选择性,Ag(I)浓度在9.4×10-7～8.0×10-6mol/L范围内,氧化峰电流与Ag(I)呈现良好的线性关系,检出限为2×10-7 mol/L。该自组装电极可用于水样的测定。     

固相配位化学反应研究ⅩⅩⅩⅩⅢ.[Co(NH_3)_4CO_3]Cl、[Co(en)_2CO_3]Cl与NH_4SCN的固相取代反应

本文研究了[Co(NH_3)_4CO_3]Cl、[Co(en)_2CO_3]C1分别与NH_4SCN在100℃发生的固相取代反应.[Co(NH_3)_4CO_3]Cl与NH_4SCN反应生成trans-[Co(NH_3)_4(NCS)_2]~+;[Co(en)_2CO_3]Cl与NH_4SCN反应先生成cis-[Co(en)_2(NCS)_2]~+,然后转化成trans-(Co(en)_2(NCS)_2]~+。采用气相色谱、红外光谱、X粉末衍射和核磁共振法对相应反应体系及其产物进行了测试,推测反应按S_(N~2)机理进行。     

Synthesis of High Performance Thiophene–Aromatic Polyesters from Bio-Sourced Organic Acids and Polysaccharide-Derived Diol: Characterization and Degradability Studies

In this work, the feasibility of replacing petroleum-based poly(ethylene terephthalate) (PET) with fully bio-based copolyesters derived from dimethyl 2,5-thiophenedicarboxylate (DMTD), dimethyl 2,5-dimethoxyterephthalate (DMDMT), and polysaccharide-derived 1,6-hexanediol (HDO) was investigated. A systematic study of structure-property relationship revealed that the properties of these poly(thiophene–aromatic) copolyesters (PHS(20–90)) can be tailored by varying the ratio of diester monomers in the reaction, whereby an increase in DMTD content noticeably shortened the reaction time in the transesterification step due to its higher reactivity as compared with DMDMT. The copolyesters had weight-average molar masses (Mw) between 27,500 and 38,800 g/mol, and dispersity Đ of 2.0–2.5. The different polarity and stability of heterocyclic DMTD provided an efficient mean to tailor the crystallization ability of the copolyesters, which in turn affected the thermal and mechanical performance. The glass transition temperature (T_g) could be tuned from 70–100 °C, while the tensile strength was in a range of 23–80 MPa. The obtained results confirmed that the co-monomers were successfully inserted into the copolyester chains. As compared with commercial poly(ethylene terephthalate), the copolyesters displayed not only enhanced susceptibility to hydrolysis, but also appreciable biodegradability by lipases, with weight losses of up to 16% by weight after 28 weeks of incubation.     

Determination of copper(II) by anodic stripping voltammetry at a 2,5-dimercapto-1,3,4-thiadiazol self-assembled monolayer-based gold electrode.

2,5-Dimercapto-1,3,4-thiadiazol (DMTD) can bind on the surface of a gold electrode through the strong gold-sulfur interaction. The fabrication and electrochemical characteristics of the DMTD self-assembled monolayer (SAM)-modified gold electrode were investigated. The DMTD SAM electrode exhibited a significantly increased sensitivity. Cu(II) was accumulated in phosphate buffer (pH 4.6) at a potential of -0.6 V (vs. Ag/AgCl) for 40 s and then determined by anodic stripping voltammetry (ASV) in copper-free phosphate buffer (pH 5.0). The effects of various parameters, such as the pH values of the preconcentration solution and measurement solution, the accumulation potential, and the accumulation time, were investigated. Under the optimum conditions, a linear calibration graph was obtained in the concentration range of 8.0 x 10(-6) to 8.0 x 10(-5) mol l(-1) with a correlation coefficient of 0.9978. The relative standard deviations for eight successive determinations were 4.3 and 2.9% for 1.0 x 10(-5) and 2.0 x 10(-5) mol l(-1) Cu(II), respectively. The detection limit (three times signal to noise) was 4.0 x 10(-7) mol l(-1). The proposed voltammetric method was utilized successfully to detect the concentration of Cu(II) ions in tap water samples.     

Study on triazine thiols. VI. Selective graft copolymerization of MMA on modified copper plates

Graft copolymerization of MMA on copper surface which is initiated by Na₂S₂O₈ in an aqueous solution proceeded selectively when copper plates are modified by 6-unsaturated group-1,3,5-triazine-2,4-dithiol monosodium salts (UTD) and 6-dimethylamino-1,3,5-triazine-2,4-dithiol monosodium salt (DMTD). Grafting weight was influenced by the molar ratio of UTD to DMTD in the aqueous solution that copper plates are treated. The former on copper surface is a coupling component of MMA radicals and initiator radicals. The latter is a catalyst which accelerates the formation of radicals acting with Na₂S₂O₈. Selective graft copolymerization is due to the reason that radicals generate selectively in the neighborhood of copper surface and in this place there are monomers such as MMA and UTD.     

Cathodic Stripping Voltammetry of 2-Mercapto-5-Methyl-1,3,4-Thiadiazol and 2,5-Dimercapto-1,3,4-Thiadiazol at a Controlled-Growth Mercury Drop Electrode

2-Mercapto-5-methyl-1,3,4-thiadiazol (MMTD) and 2,5-dimercapto-1,3,4-thiadiazol (DMTD) were studied by differential pulse cathodic stripping voltammetry (DPCSV). The influence of buffer, pH, accumulation potential (E_acc), and accumulation time (t_acc) was investigated. It was stated that the concentration of the buffer affects the height of DPCSV peaks. The best analytical signals were recorded in acetate buffer at pH 4.3 and a buffer concentration of 0.01 mol/L for MMTD and 0.02 mol/L for DMTD, E_acc = 0.2 V, and t_acc = 120 s for MMTD and 180 s for DMTD. A linear dependence was found from 1 to 8 × 10^?8 mol/L for MMTD and from 1 × 10^?8 to 1 × 10^?7 mol/L for DMTD. The influence of cations [Cu(II), Co(II)] was also considered.     

A simple spectrophotometric method for the determination of copper in industrial, environmental, biological and soil samples using 2,5-dimercapto-1,3,4-thiadiazole.

A simple spectrophotometric method is presented for the rapid determination of copper at a trace level using 2,5-dimercapto-1,3,4-thiadiazole (DMTD) as a new spectrophotometric reagent. The method is based on the reaction of non-absorbent DMTD in a slightly acidic (0.002-0.014 mol dm(-3) sulfuric acid) aqueous solution with copper(II) to produce a highly absorbent greenish-yellow chelate product that has an absorption maximum at 390 nm. The reaction is instantaneous and the absorbance remains stable for 24 h. The average molar absorption coefficient and Sandell's sensitivity were found to be 5.65 x 10(4) dm3 mol(-1) cm(-1) and 10 ng cm(-2) of CuII, respectively. Linear calibration graphs were obtained for 0.1-20 microg cm(-3) of CuII; the stoichiometric composition of the chelate is 1:2 (Cu:DMTD). A large excess of over 50 cations, anions and complexing agents (e.g. tartrate, oxalate, citrate, phosphate, thiourea, SCN-) do not interfere in the determination. The method was successfully used for the determination of copper in several Standard Reference Materials as well as in some environmental water samples, biological samples, soil samples and solutions containing both copper(I) and copper(II) and complex synthetic mixtures. The method has high precision and accuracy (s = +/-0.01 for 0.5 microg cm(-1)).     

The solvent trapping or co-adsorbing effect during the self-assembly monolayer studied by surface-enhanced Raman scattering

The possibility of solvent molecules being trapped within the monolayer interior during the self-assembly of 2,5-dimercapto-1,3,4-thiadiazole (DMTD) molecules from alcoholic solution, or co-adsorbing together with the solute molecules onto the silver surface was verified by means of surface-enhanced Raman scattering (SERS). Variations of the relative intensity of the solvent bands to the concentrations of the solution were investigated. To a certain range of the concentration, the smaller the concentration is, the larger the relative intensity of the solvent bands is. A new method for obtaining the SERS spectra of the organic compounds that are insoluble in water was developed in our laboratory, which also provides further evidence for the solvent trapping or co-adsorbing effect.     

Adsorptive stripping voltammetry of some trace elements in biological samples,II: Nickel,arsenic, aluminium and selenium

A study of the adsorptive stripping voltammetry of nickel, aluminium, selenium and arsenic is reported in which 2,5-dimercapto-1,3,4-thiadiazole (DMTD) has been used as a chelating agent. By a suitable choice of deposition potential, deposition time, reagent reaction time and other operating conditions, the determination of the four elements could be achieved.By the use of benzyltrimethyl ammonium methoxide as a digesting solvent, it was possible to apply the procedure to the direct determination of the four elements in biological samples.     

Adsorptive stripping voltammetry of some trace elements in biological samples. I. Cadmium and zinc

A study of the adsorptive stripping voltammetry of cadmium and zinc is reported in which ligands containing sulphur donor atoms were examined. This type of ligand showed good adsorptive behaviour and strong metal complexation. It was found that the ligand 2,5-dimer-capto-1,3,4-thiadiazole (DMTD) was very suitable for the determination of cadmium and zinc using this technique.The method was applied to the direct determination of these metals in biological samples using benzyl trimethylammonium methoxide as digesting solvent for the samples.     

Spectrophotometric determination of lead in industrial, environmental, biological and soil samples using 2,5-dimercapto-1,3,4-thiadiazole

A very simple, ultra-sensitive and fairly selective non-extractive spectrophotometric method for the determination of trace amounts of lead with 2,5-dimercapto-1,3,4-thiadiazole (DMTD) has been developed. DMTD reacts in slightly acidic (0.0015-0.01 M HCl) aquatic media with lead(II) to give a greenish-yellow chelate, which has an absorption maximum at 375 nm. The reaction is instantaneous and absorbance remains stable for 24 h. The average molar absorption coefficient and Sandell's sensitivity were found to be 4.93x10(4) lmol(-1)cm(-1) and 15 ngcm(-2) of Pb, respectively. Linear calibration graphs were obtained for 0.1-40 mugml(-1) of Pb; the stoichiometric composition of the chelate is 1:2 (Pb-DMTD). The interference from over 50 cations, anions and complexing agents has been studied at 1 mugml(-1) of Pb. The method developed was used successfully in the determination of lead in several standard reference materials (alloys and steels), environmental waters (potable and polluted), biological samples (human blood and urine), soil samples, solutions containing both lead(II) and lead(IV) and complex synthetic mixtures. The method has high precision and accuracy (S=+/-0.01 for 0.5 mugml(-1)).