Novel heat-resistant and organosoluble poly(amide-imide)s containing laterally-attached phenoxy phenylene groups

In this research a new diimide-diacid monomer, 2,2′-bis(4-phenoxyphenyl)-4,4′-bis(N-trimellitoyl)diphenyl ether (BPDPE) containing two laterally-attached phenoxy phenylene groups was prepared by the reaction of 2,2′-bis[(p-phenoxy phenyl)]-4,4′-diaminodiphenyl ether (PPAPE) with trimellitic anhydride in refluxing glacial acetic acid. Ether-hinged wholly aromatic poly(amide-imide)s with limited viscosity number values of 0.61–0.87 dL g⁻¹ were prepared by triphenyl phosphate (TPP)-activated polycondensation of BPDPE with diamines including PPAPE and 4,4′-diaminodiphenyl ether (DADPE). For comparative purposes, reference poly(amide-imide)s were also prepared by reacting diimide-diacid monomer lacking phenoxy phenylene lateral groups namely 4,4′-bis(N-trimellitoyl)diphenyl ether (BTDPE) with the same diamines under similar conditions. A model compound MODEL was also synthesized by the reaction of BTBPE with two mole equivalents of aniline to compare the spectral characteristics results. Number and weight average molecular weights were determined by gel permeation chromatography (GPC) technique. The phenoxy phenylene-containing poly(amide-imide)s (all, except that of resulted from BTDPE and DADPE) had excellent organosolubility in common polar solvents. A low crystallinity extent was only observed using their wide-angle X-ray diffractograms (WAXD). A qualitative study showed the prepared polymers could also be cast into optically-transparent and flexible thin films. The ether-containing lateral groups attached to the ether-hinged macromolecular main chains had no substantial diminishing effect on the thermal stability of these structurally-modified poly(amide-imide)s.     

Synthesis and characterization of fluorinated poly(aryl ether ketone)s containing 1,4-naphthalene moieties

The new monomer 2,2-bis[4-(4-{4-fluorobenzoyl}-1-naphthoxy)phenyl]hexafluoropropane ( 2 ) was synthesized in a two-step reaction sequence. 2,2-his[4-(1-naphthoxy)phenyl]-hexafluoropropane ( 1 ) was prepared using the Ullmann ether synthesis reaction of 4,4-(hex-afluoroisopropylidiene)diphenol with 1-bromonaphthalene. Friedel-Crafts acylation of 1 with 4-fluorobenzoyl chloride in methylene chloride containing dimethylsulfone selectively afforded 2 in 82% yield. The polycondensation of 2 with various bisphenols in DMAc in the presence of an excess of potassium carbonate as a condensation reagent was carried out at 165°C to quantitatively afford the corresponding fluorinated poly(aryl ether ketone)s containing 1,4-naphthalene moieties. Thermal analysis of the polymers showed them to have T_gs ranging from 194 to 230°C and to be thermally stable in air up with initial weight losses at about 500°C. In addition, these novel polymers exhibited excellent solubility in organic solvents including NMP, DMAc, and chloroform. © 1997 John Wiley & Sons, Inc.     

Ordered porous films based on fluorinated polyimide derived from 2,2′-bis(3,4-dicarboxyphenyl) hexafluoropropane dianhydride and 3,3′-dimethyl-4,4′-diaminodiphenylmethane

One of fluorinated polyimides was synthesized from 2,2′-bis(3,4-dicarboxyphenyl) hexafluoropropane dianhydride (6FDA) and 3,3′-dimethyl-4,4′-diaminodiphenylmethane (DMMDA) by two-steps method, which had good solubility and hydrophilicity. 6FDA-DMMDA polyimide was dissolved in chloroform (CHCl₃) and cast on a glass substrate in a humid atmosphere. It was found that 6FDA-DMMDA/CHCl₃ solution was easy to form ordered porous structure at high concentration, and the reason was discussed in detail. In addition, the influences of solution concentration, the atmosphere humidity, were also tested.     

Novel ortho‐linked fluorinated poly(ether‐imide)s based on 2,2′‐substituted 1,1′‐binaphthyl units

In this research, a new fluorinated diamine based on 2,2′‐substituted 1,1′‐binaphthyl units, 2,2′‐bis(2‐amino‐4‐trifluoromethylphenoxy)‐1,1′‐binaphthyl (AFPBN) was synthesized and then used to prepare the corresponding ortho‐linked poly(ether‐imide)s via chemical polyimidization with several aromatic carboxylic dianhydrides. The resulting poly(ether‐imide)s were fully characterized by FT‐IR, NMR, viscosity measurements, gel‐permeation chromatography, UV–vis, X‐ray diffraction, organo‐solubility, thermogravimetric analysis (TGA), and differential scanning calorimetry. Probing optical behavior of the colorless films prepared from these poly(ether‐imide)s demonstrated that they possess a high degree of optical transparency, and UV–visible absorption cut‐off wavelength values were found to be in the range of 404–471 nm. The resulting polymers exhibited excellent organo‐solubility in polar solvents such as dimethylformamide, dimethyl sulfoxide, pyridine, and even tetrahydrofuran. To investigate the heat stability of the samples, their thermograms obtained from TGA were plotted, and for example, it is found that the 10% weight loss temperature of representative polymer AFPBN/3,3′,4,4′‐benzophenonetetracarboxylic dianhydride occurred at 532°C in nitrogen. These poly(ether‐imide)s had glass‐transition temperatures (T_g's) up to 280°C. Two previously prepared analogues of AFPBN, i.e. nonfluorinated diamine DAM1 and para‐linked fluorinated diamine DAM2 used to prepare the corresponding poly(ether‐imide)s, were also considered to compare the results obtained. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis and characterization of novel fluorinated polyimides derived from 4-phenyl-2,6-bis[4-(4′-amino-2′-trifluoromethyl-phenoxy)phenyl]pyridine and dianhydrides

A series of organo-soluble polyimides were prepared from a novel fluorinated diamine monomer, 4-phenyl-2,6-bis[4-(4′-amino-2′-trifluoromethylphenoxy)phenyl]pyridine and various commercial aromatic dianhydrides. These polyimides had good solubility in common organic solvents. The obtained strong and flexible PI films exhibited excellent thermal stability with the decomposition temperature (at 5% weight loss) of above 561 °C and the glass transition temperature in the range of 258-312 °C. Moreover, the polymer films showed good electrical insulating property, low dielectric constant and low water uptake due to the introduction of fluorinated substitutes in the polymer backbone. The remarkable combined features ensure these polymers to be ideal candidate materials for advanced microelectronic industry and other related applications.     

Influence of the structure of the diol on the properties of aromatic polyesterimides

A series of aromatic polyesterimides with ester bonds in the side-chains has been obtained by the partial esterification of a polyamic acid prepared from pyromellitic dianhydride and 4,4′-diaminodiphenyl ether with the following aromatic diols: 4,4′-di(2-hydroxyethoxy)-1,1′-binaphthyl, 2,2′-di(2-hydroxyethoxy)-1,1′-binaphthyl.di(2-hydroxyethoxy-1 -naphthyl)methane,2,2-di[4-(2-hydroxyethoxy)phenyl] propane.Influence of the structure of the diol on the thermal, mechanical and dielectric properties of resultant polymer foils has been studied. Properties of these foils have been compared with those obtained for the polypyromellitimide film of the 4,4′-diaminodiphenyl ether.     

Polyimides from 4,4′-(alkylene-α,ω-dioxy) bis(phenylsuccinic anhydride)s and bis(phenylglutaric anhydride)s

4,4′-(Alkylene-α,ω-dioxy)bis(phenylsuccinic anhydride)s and bis(glutaric anhydride)s were obtained by the condensation of 4,4′-diformyl-α,ω-diphenoxyalkanes with ethyl cyanoacetate followed by the addition of potassium cyanide or meldrum acid (2,2-dimenthyl-1,3-dioxane-4,6-dione), hydrolysis with concentrated hydrochloric acid, and dehydration with acetic anhydride. Alkylene groups were ethylene, trimethylene, and tetramethylene. Polyimides were prepared from these anhydrides with 4,4′-diaminodiphenyl ether, 4,4′-diaminodiphenyl sulfide, and 4,4′-diaminodiphenylmethane through thermal ring closure of polyamic acids obtained by solution polymerization in dimethylacetamide, and thermal stability of these polyimide film was examined by thermogravimetric analysis.     

Synthesis and characterizations of 3,3′-bis(diphenylphosphinoamine)-2,2′-bipyridine and 3,3′-bis(diphenylphosphinite)-2,2′-bipyridine and their chalcogenides

New bis(phosphinoamine) and bis(phosphinite) derivatives of 2,2′-bipyridine were prepared through a single step reaction of 3,3′-diamino-2,2′-bipyridine or 3,3′-dihydroxy-2,2′-bipyridine with diphenylchlorophosphine, respectively. Their P = E chalcogenides (E = O, S, Se) were also prepared. All the new compounds were characterized by elemental analysis, IR and NMR spectroscopies. The molecular structure of 3,3′-bis(diphenylthiophosphinite)-2,2′-bipyridine was elucidated by single-crystal X-ray crystallography.     

Synthesis and characterization of novel fluorinated polyimides derived from 1,1′-bis(4-aminophenyl)-1-(3-trifluoromethylphenyl)-2,2,2-trifluoroethane and aromatic dianhydrides

A novel fluorinated aromatic diamine 1,1′-bis(4-aminophenyl)-1-(3-trifluoromethylphenyl)-2,2,2-trifluoroethane (6FDAM) was synthesized in a simple procedure, which was then employed to prepare a series of fluorinated polyimides with commercial aromatic dianhydrides, such as pyromellitic dianhydride (PMDA), 2,2-bis(3,4-dicarboxyphenyl)hexafluoropropane (6FDA), 3,3′,4,4′-benzophenonetetracarboxylic dianhydride (BTDA) and 4,4′-oxydiphthalic anhydride (ODPA). The polyimides exhibited good solubility in strong dipolar solvents such as NMP, DMAc, DMF and m-cresol as well as some of low boiling point organic solvents of THF and CHCl₃, etc. Experimental results indicated the polyimides possessed low moisture adsorptions of 0.42-0.95%, low dielectric constant of 2.71-2.95 at 1 MHz, high dielectric strength of 92.0-122.6 kV/mm and good optical transparency with cutoff wavelengths of UV-vis at 330-375 nm. The polyimides also exhibited good mechanical properties as well as excellent thermal and thermo-oxidative stability. The fluorinated polyimides possessed better solubility, lower dielectric constant and water adsorption as well as higher optical transparency than the representative non-fluorinated polyimide derived from PMDA and 4,4′-oxydianiline (ODA).     

Poly(amideimide)s containing pendant pentadecyl chains: Synthesis and characterization

A new aromatic diacylhydrazide monomer viz., 4-[4′-(hydrazinocarbonyl)phenoxy]-2- pentadecylbenzohydrazide was synthesized starting from cardanol, which in turn is obtainable from cashew nut shell liquid - a renewable resource material. A series of new poly(amideimide)s containing flexibilizing ether linkages and pendant pentadecyl chains was synthesized from 4-[4′-(hydrazinocarbonyl)phenoxy]-2-pentadecylbenzohydrazide and commercially available aromatic dianhydrides, viz., benzene-1,2,4,5-tetracarboxylic dianhydride, 3,3′,4,4′-biphenyltetracarboxylic dianhydride, benzophenone-3,3′,4,4′-tetracarboxylic dianhydride, 4,4′-oxydiphthalic anhydride and 4,4′-(hexafluoro isopropylidene)diphthalic anhydride by a two-step solution polycondensation in N,N-dimethylacetamide via the poly(hydrazide acid) intermediate. Inherent viscosities of poly(amideimide)s were in the range 0.60-0.64 dL/g in N,N-dimethylacetamide at 30 ± 0.1 °C. Poly(amideimide)s could be solution cast into tough, transparent and flexible films from their N,N-dimethylacetamide solutions. The solubility of poly(amideimide)s was significantly improved by incorporation of pendant pentadecyl chains and were found to be soluble in N,N-dimethylacetamide, 1-methyl-2-pyrrolidinone, pyridine and m-cresol at room temperature or upon heating. Wide angle X-ray diffraction patterns of poly(amideimide)s revealed a broad halo at around 2θ = ∼19° suggesting that polymers were amorphous in nature. In the small-angle region, diffuse to sharp reflections of a typically layered structure resulting from the packing of pentadecyl side chains were observed. The temperature at 10% weight loss (T₁₀), determined by TGA in nitrogen atmosphere, of poly(amideimide)s was in the range of 388-410 °C indicating their good thermal stability. Glass transition temperatures of poly(amideimide)s were in the range 162-198 °C. It was observed that the plasticization effect of attached pentadecyl side chains induced the depression of T_g.     

Synthesis and properties of aromatic poly (ether sulfone)s and poly (ether ketone)s based on methyl-substituted biphenyl-4,4′-diols

Novel methyl-substituted aromatic poly (ether sulfone)s and poly (ether ketone)s were synthesized from combinations of 3,3′,5,5′-tetramethylbipheny-4,4′-diol and 2,2′,3,3′,5,5′-hexamethylbiphenyl-4,4′-diol, and 4,4′-dichlorodiphenyl sulfone and 4,4′-difluorobenzo-phenone by nucleophilic aromatic substitution polycondensation. The polycondensations proceeded quantitatively in a N-methyl-2-pyrrolidone-toluene solvent system in the presence of anhydrous potassium carbonate to afford the polymers with inherent viscosities between 0.86 and 1.55 dL/g. The methyl-substituted poly (ether sulfone)s and poly (ether ketone)s showed good solubility in common organic solvents such as chloroform, tetrahydrofuran, pyridine, m-cresol, and N,N-dimethylacetamide. The tetramethyl- and hexamethyl-substituted aromatic polyethers had higher glass transition temperatures than the corresponding unsubstituted polymers, and did not decompose below 350°C in both air and nitrogen atmospheres. The films of the methyl-substituted poly (ether ketone)s became insoluble in chloroform by the irradiation of ultraviolet light, indicating the occurrence of photochemical crosslinking reactions. © 1994 John Wiley & Sons, Inc.     

Co‐poly(aryl ether sulfone)s containing phthalimidine moiety in the main chain

Several new co‐poly(arylene ether sulfone)s have been prepared by the reaction of 4,4′‐fluorodiphenyl sulfone (FDS) with different bisphenols namely 4,4′‐isopropylidenediphenol (BPA), 4,4′‐hexafluoroisopropylidenediphenol (6F‐BPA), and N‐phenyl‐3,3‐bis(4‐hydroxyphenyl)phthalimidine(PA). The homo‐poly(arylene ether sulfone)s are named as 1a, 2a, and 3a. The copolymers namely 2b, 2c, 2d and 3b, 3c, 3d have been prepared, respectively, on reaction of FDS with BPA or 6F‐BPA using different molar ratios of PA such as 25, 50, and 75. The poly(aryl ether sulfone)s 1a containing PA unit in the main chain showed a very high glass transition temperature of 280°C and an outstanding thermal stability up to 510°C for 5% weight loss under synthetic air. Depending on the mole% of PA, the glass transition temperatures of the copolymers can be varied. The polymers were soluble in a wide range of organic solvents. Transparent thin films of these polymers exhibited tensile strengths upto 84 MPa and Young's modulus up to 3.16 GPa. The films of these polymers showed low water absorption of 0.24%. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis of fluorine‐containing star‐shaped poly(vinyl ether)s via arm‐linking reactions in living cationic polymerization

Various types of fluorine‐containing star‐shaped poly(vinyl ether)s were successfully synthesized by crosslinking reactions of living polymers based on living cationic polymerization. Star polymers with fluorinated arm chains were prepared by the reaction between a divinyl ether and living poly(vinyl ether)s with fluorine groups (C₄F₉, C₆F₁₃, and C₈F₁₇) at the side chain using cationogen/Et_1.5AlCl_1.5 in a fluorinated solvent (dichloropentafluoropropanes), giving star‐shaped fluorinated polymers in high yields with a relatively narrow molecular weight distribution. The concentration of living polymers for the crosslinking reaction and the molar feed ratio of a bifunctional vinyl ether to living polymers affected the yield and molecular weight of the star polymers. Star polymers with block arms were prepared by a linking reaction of living block copolymers of a fluorinated segment and a nonfluorinated segment. Heteroarm star‐shaped polymers containing two‐ or three‐arm species were synthesized using a mixture of different living polymer species for the reaction with a bifunctional vinyl ether. The obtained polymers underwent temperature‐induced solubility transitions in various organic solvents, and their concentrated solutions underwent sol–gel transitions, based on the solubility transition of a thermoresponsive fluorinated segment. Furthermore, a slight amount of fluorine groups were shown to be effective for physical gelation when those were located at the arm ends of a star polymer. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Spectroscopic, thermal and structural studies of cocrystal of 2,2′-diamino-4,4′-bis(1,3-thiazole) with 4,4′-bipyridine, 1,2-bis(4-pyridyl)ethylene and 1,3-bis(4-pyridyl)propane

Three new cocrystals based upon 2,2′-diamino-4,4′-bis(1,3-thiazole) (DABTZ) with 4,4′-bipyridine (4,4′-bipy), 1,2-bis(4-pyridyl)ethylene (bpe) and 1,3-bis(4-pyridyl)propane (bpp): [(DABTZ) (4,4′-bipy)], [(DABTZ) (bpe)] and [(DABTZ) (bpp)] have been synthesized and characterized by elemental analysis, IR-, ¹H NMR-, ¹³C NMR spectroscopy and studied by thermal and X-ray crystallography. Self-assembly of these compounds in the solid state is likely caused by both hydrogen bonding, and π-π stacking.     

Synthesis and optical properties of a poly(2′,5′-dioctyloxy-4,4′,4″- terphenylenevinylene) with high content of (Z) vinylene units

Poly(2′,5′-dioctyloxy-4,4′,4″-terphenylenevinylene) with (E) configuration of the vinylene double bonds was prepared by Suzuki-Miyaura polymerization of (E)-4,4′-dibromostilbene and 2,5-dioctyloxy-1,4-benzenediboronic acid. Attempts to extend this simple procedure to the synthesis of the polymer with (Z) configuration, starting from (Z)-4,4′-dibromostilbene, were unsuccessful. However, the use of (Z)-4,4′-diiodostilbene and a careful choice of Pd catalyst and experimental conditions, lead to a material with a >95/<5 (Z)/(E) ratio of vinylene units. The investigation of optical properties of both the (E) and (Z) polymers evidenced that (Z) linkages act as defects which reduce the effective conjugation length in the polymer backbone.     

Spectroelectrochemical properties of poly(4,4'-dialkyl-2,2'-bithiophenes) and poly( 3-alkylthiophenes): A comparative study

The influence of alkyl side chain distribution patterns on the Spectroelectrochemical properties of poly(alkylthiophenes) has been studied. Two types of compounds were studied as representing different coupling patterns:(i) poly(4,4'-dialkyl-2,2'-bithiophenes), which represent head-to-head and tail-to-tail coupled poly(al-kylthiophene) chains; and(ii) poly(3-alkylthiophenes), which represent head-to-tail coupled poly(alkylthiophene) chains.Both types of polymers can be obtained chemically or electrochemically by the constant potential method or the potential scanning method. Poly(4,4'-dialkyl-2,2'-bithiophenes) differ significantly from poly(3-alkylthiophenes) in their voltammetric and spectroelectrocheinical properties. The oxidative doping of these compounds occurs in a very narrow potential range (35 mV as determined by static Spectroelectrochemical studies) and is significantly retarded in dynamic measurements. Analysis of the changes in absorption in the 500 nm spectral region and the observation of an induction period in the oxidation at constant potential seem to indicate that the oxidative doping is preceded by structural changes which facilitate the oxidation.Although in the neutral state poly(4,4'-dialkyl-2,2'-bithiophenes) absorb at 390 nm, i.e. their π→π^* transition is blue-shifted as compared to poly(3-alkylthiophenes), the polaronic states included by doping are located in the same spectral region for both families of polymers. This observation is consistent with the postulate of significant changes induced by doping in poly(4,4'-dialkyl-2,2'-bithiophenes). The more twisted head-to-head and tail-to-tail coupled poly(alkylthiophene) chains must adopt a more planar structure, similar to poly(3-alkylthiophenes), in order to create polaronic states and accommodate the charge-compensating anions.     

A general synthetic route to chiral dihydroxy-9,9′-spirobifluorenes

C₂-Symmetric 9,9′-spirobifluorenes with 2,2′-, 3,3′-, and 4,4′-dihydroxyls were conveniently prepared from 1,2-dibromobenzene. The palladium-catalyzed coupling reaction of 1,2-dibromobenzene with methoxyphenylmagnesium bromide or methoxyphenylboronic acid provided methoxy substituted 2-bromobiphenyls. Lithium-bromine exchange with n-butyllithium, followed by reaction with dimethyl carbonate afforded di[2-(methoxyphenyl)phenyl]ketones as the key intermediates. A continuous ring-closure induced by a strong Lewis acid and demethylation gave dihydroxy-9,9′-spirobifluorenes. The racemic dihydroxy products were resolved by inclusion crystallization using chiral resolving reagents or separated by chiral HPLC.     

Synthesis and Characterization of Poly(ether ether ketone)s with (2,5‐dihydroxy)phenyl Side Group

A new monomer, (2,5‐dimethoxy)phenylhydroquinone (DMPH), was prepared in a two‐step synthetic procedure. One aromatic poly(ether ether ketone)s with 2,5‐dimethoxy phenyl side group (DMP‐PEEK) was synthesized via an aromatic nucleophilic substitution reaction with 4,4′‐difluorobenzophenone (DFB). Poly(ether ether ketone)s with 2,5‐dihydroxy phenyl side group (DHP‐PEEK) was obtained via hydrolysis of methoxy group on the DMP‐PEEK. Both of the high molecular weight polymers could be obtained despite the steric effect of the bulky pendant groups. The two polymers have good solubility at room temperature.     

Synthesis and characterization of polyamides and poly(amide-imide)s derived from 2,2-bis(4-aminophenoxy) benzonitrile

A series of polyamides and poly(amide-imide)s were prepared by the direct poly-condensation of 2,2-bis(4-aminophenoxy) benzonitrile [4-APBN] with aromatic dicarboxylic acids and bis(carboxyphthalimide)s in N-methyl-2-pyrrolidone [NMP] with triphenyl phosphite and pyridine as condensing agents. The synthesis of 4-APBN involves a nucleophilic displacement reaction in dipolar aprotic solvent with the alkali metal salt of p-aminophenol and an activated aromatic dichloro compound. Bis(carboxyphthalimide)s were prepared by condensation of 4,4^′-diaminodiphenylsulfone, 3,3^′-diaminodiphenylsulfone, 4,4^′-diaminodiphenylether, 4,4^′-diaminodiphenylmethane, 3,3^′-diaminobenzophenone, and trimellitic anhydride at a 1:2 molar ratio. The inherent viscosities of the resulting polymers were found to be in the range of 0.31-0.93 dl/g and glass transition temperatures between 235 and 298 °C. All polymers were soluble in aprotic polar solvents such as dimethylsulfoxide and NMP. The results of thermogravimetry revealed that all the polymers showed no significant weight loss before 400 °C. Wide-angle X-ray diffractograms revealed that all polymers were found to be amorphous except for the polyamide derived from isophthalic acid and polyamide-imides derived from diaminodiphenylether and diaminobenzophenone based bis(carboxyphthalimide)s.