Synthesis and characterization of soluble polyimides derived from a novel unsymmetrical diamine monomer: 1,4-(2′,4″-diaminodiphenoxy)benzene

A new aromatic unsymmetrical diamine monomer, 1,4-(2′,4″-diaminodiphenoxy)benzene (OAPB), was successfully synthesized in three steps using hydroquinone as starting material and polymerized with various aromatic tetracarboxylic acid dianhydrides, including 4,4′-oxydiphthalic anhydride (ODPA), 3,3′,4,4′-benzophenone tetracarboxylic dianhydride (BTDA), 2,2′-bis(3,4-dicarboxyphenyl)-hexafluoropropane dianhydride (6FDA) and pyromellitic dianhydride (PMDA) via the conventional two-step thermal or chemical imidization method to produce a series of the unsymmetrical aromatic polyimides. The polyimides were characterized by solubility tests, viscosity measurements, IR, ¹H NMR, and ¹³C NMR spectroscopy, X-ray diffraction studies, and thermogravimetric analysis. The polyimides obtained had inherent viscosities ranged of 0.38-0.58 dL/g, and were easily dissolved in common organic solvents. The resulting strong and flexible PI films exhibited excellent thermal stability with the decomposition temperature (at 5% weight loss) of above 505 °C and the glass transition temperature in the range of 230-299 °C. Moreover, the polymer films showed outstanding mechanical properties with the tensile strengths of 41.4-108.5 MPa, elongation at breaks of 5-9% and initial moduli of 1.15-1.68 GPa.     

Synthesis and characterization of novel fluorinated polyimides derived from 4-phenyl-2,6-bis[4-(4′-amino-2′-trifluoromethyl-phenoxy)phenyl]pyridine and dianhydrides

A series of organo-soluble polyimides were prepared from a novel fluorinated diamine monomer, 4-phenyl-2,6-bis[4-(4′-amino-2′-trifluoromethylphenoxy)phenyl]pyridine and various commercial aromatic dianhydrides. These polyimides had good solubility in common organic solvents. The obtained strong and flexible PI films exhibited excellent thermal stability with the decomposition temperature (at 5% weight loss) of above 561 °C and the glass transition temperature in the range of 258-312 °C. Moreover, the polymer films showed good electrical insulating property, low dielectric constant and low water uptake due to the introduction of fluorinated substitutes in the polymer backbone. The remarkable combined features ensure these polymers to be ideal candidate materials for advanced microelectronic industry and other related applications.     

Synthesis and properties of new pyridine-bridged poly(ether-imide)s based on 4-(4-trifluoromethylphenyl)-2,6-bis[4-(4-aminophenoxy)phenyl]pyridine

A novel pyridine-containing aromatic diamine monomer, 4-(4-trifluoromethylphenyl)-2,6-bis[4-(4-aminophenoxy)phenyl]pyridine (FAPP), was synthesized via the modified Chichibabin pyridine synthesis of 4-(4-nitrophenoxy)-acetophenone with 4-trifluoromethyl-benzaldehyde, followed by a catalytic reduction. A series of fluorinated pyridine-bridged aromatic poly(ether-imide)s were prepared from the resulting diamine monomer with various aromatic dianhydrides via a conventional two-step process. The resulting polyimides exhibited good solubility in aprotic amide solvents and m-cresol, such as N,N-dimethylacetamide, N-methyl-2-pyrrolidone, and m-cresol, etc., which possessed the inherent viscosities of 0.76-0.91 dL/g. Strong and flexible poly(ether-imide) films were obtained, which showed excellent thermal properties with the glass transition temperatures of 268-353 °C, the temperature at 5% weight loss of 547-595 °C, and the residue at 700 °C of 65-74% in nitrogen, good mechanical properties with the tensile strengths of 87.6-104.2 MPa and elongations at breakage of 8.9-12.6%, and good optical transparency with the cut-off wavelengths of 357-380 nm, as well as low dielectric constants in the range of 2.49-3.04 at 1 MHz and low water uptake 0.43-0.69%. Furthermore, the resulted polyimides derived from FAPP were compared with non-fluorinated analogous polyimides and fluorinated analogous polyimides with trifluoromethyl groups in different positions, and the effects of substituents were also investigated and discussed.     

Synthesis and characterization of fluorinated polyimides derived from novel unsymmetrical diamines

Two kinds of aromatic, unsymmetrical diamines with ether-ketone group, 3-amino-4′-(4-amino-2-trifluoromethylphenoxy)-benzophenone and 4-amino-4′-(4-amino-2-trifluoromethylphenoxy)-benzophenone, were successfully synthesized with two different synthetic routes. Then, they were polymerized with 4,4′-oxydiphthalic anhydride, 3,3′,4,4′-benzophenone tetracarboxylic dianhydride, and 2,2′-bis(3,4-dicarboxyphenyl)-hexafluoropropane dianhydride to form a series of fluorinated polyimides via a conventional two-step thermal or chemical imidization method. The resulting polyimides were characterized by measuring their solubility, viscosity, mechanical properties, IR-FT, and thermal analysis. The results showed that the polyimides had inherent viscosities of 0.48-0.68 dl/g and were easily dissolved in bipolarity solvents and common, low-boiling point solvents. Meanwhile, the resulting strong and flexible polyimide films exhibited excellent thermal stability, e.g., decomposition temperatures (at 10% weight loss) are above 575 °C and glass-transition temperatures in the range of 218-242 °C. The polymer films also showed outstanding mechanical properties, such as tensile strengths of 86.5-132.8 MPa, elongations at break of 8-14%, and initial moduli of 1.32-1.97 GPa. These outstanding combined features ensure that the polymers are desirable candidate materials for advanced applications.     

Adhesive and dielectric properties of novel polyimides with bis(3,3′-aminophenyl)-2,3,5,6-tetrafluoro-4-trifluoromethyl phenyl phosphine oxide (mDA7FPPO)

Polyimides with a low dielectric constant and excellent adhesion were prepared from a diamine containing phosphine oxide and fluorine groups, bis(3,3′-aminophenyl-2,3,5,6-tetrafluoro-4-trifluoromethyl phenyl phosphine oxide (mDA7FPPO), and rigid-rod type dianhydride containing fluorine groups, such as 3,6-di(3′,5′-bis(trifluoromethyl)-phenyl)pyromellitic dianhydride (12FPMDA). The polyimides were synthesized via the known two-step process, preparation of poly(amic-acid) followed by solution imidization, and characterized by FT-IR, NMR, DSC, TGA and TMA. In addition, their solubility, intrinsic viscosity, dielectric constant and adhesive property were also evaluated. For comparison, 3,6-di(4′-trifluoromethylphenyl) pyromellitic dianhydride (6FPMDA) and 3,6-diphenylpyromellitic dianhydride (DPPMDA) were also utilized. The prepared polyimides exhibited high T_g (276-314 °C), excellent thermal stability (>500 °C in air), good adhesive property (104.7-126.3 g/mm), good solubility, and very low dielectric constant (2.34-2.89).     

Novel polyfluorinated polyimides derived from α,α-bis(4-amino-3,5-difluorophenyl)phenylmethane and aromatic dianhydrides: Synthesis and characterization

A novel aromatic diamine containing bulky lateral phenyl unit and fluorine groups ortho-substituted to the amino groups in the structure, α,α-bis(4-amino-3,5-difluorophenyl)phenylmethane (4FMA) was synthesized and characterized. 4FMA was polymerized with four aromatic dianhydrides to afford a series of polyimides (PIs) via a one-step high-temperature polycondensation procedure. All the PIs were amorphous and showed good solubility not only in polar aprotic solvents, but in many common solvents, such as cyclopentanone and tetrahydrofuran. The soluble polymers formed flexible, tough and transparent films. The films had a tensile strength, elongation at break, and tensile modulus in the ranges 85-107 MPa, 4-7%, 1.7-2.8 GPa, respectively. The polyimides also exhibited high-T_g (292-338 °C), good thermal stability, good dielectric strength, low dielectric constants, and low water uptakes due to the introduction of the polyfluorinated substituents in the polymer backbone. As expected, the PI films showed good transparency in the UV-Vis light region with cutoff wavelength as low as 318 nm and transmittance higher than 60% at 450 nm. PI-4 derived from 4FMA and fluorinated dianhydride 6FDA exhibited low light-absorption in the near-infrared region, especially at the optocommunication wavelength of 1310 nm and 1550 nm. The remarkable combined properties indicate their potential applications in microelectronic and optoelectronic fabrications.     

Synthesis and characterization of soluble polyimides based on a new fluorinated diamine: 4-Phenyl-2,6-bis[3-(4′-amino-2′-trifluoromethyl-phenoxy) phenyl] pyridine

A new kind of pyridine-containing aromatic diamine monomer, 4-phenyl-2,6-bis[3-(4′-amino-2′-trifluoromethyl-phenoxy) phenyl] pyridine (m-PAFP), was successfully synthesized by a modified Chichibabin reaction of 3-(4′-nitro-2′-trifluoro-methyl-phenoxy)-acetophenone with benzaldehyde, followed by a catalytic reduction. A series of fluorinated pyridine-bridged aromatic poly(ether-imide)s were prepared from the resulting diamine monomer with various aromatic dianhydrides via a conventional two-step thermal or chemical imidization method. The inherent viscosities values of these polyimides were in the range of 0.56-1.02 dL/g, and they could be cast and thermally converted into transparent, flexible, and tough polyimide films. The polyimides displayed higher solubility in polar solvents such as NMP, DMSO and m-cresol. The polyimides had good thermal stability, with the glass transition temperatures (T_g) of 187-211 °C, the temperatures at 5% weight loss of 511-532 °C, and the residue at 800 °C in air was higher than 50%. These films also had dielectric constants of 2.64-2.74 at 10 MHz and low water uptake 0.53-0.66%. Wide-angle X-ray diffraction measurements revealed that these polyimides were predominantly amorphous. Moreover, the polymer films of these novel polyimides showed outstanding mechanical properties with the tensile strengths of 90.1-96.6 MPa, elongations at breakage of 8.9-10.7% and tensile modulus of 1.65-1.98 GPa.     

Synthesis and properties of novel organosoluble polyimides derived from bis[3-(4-amino-2-trifluoromethylphenoxy) phenyl] ether

A new aromatic ether diamine, bis[3-(4-amino-2-trifluoromethylphenoxy) phenyl] ether, was successfully synthesized via nucleophilic substitution reaction of 3,3′-oxydiphenol and 2-chloro-5-nitrotrifluoromethylbenzene, followed by a catalytic reduction. A series of new polyimides were synthesized from the diamine with various commercially available aromatic dianhydrides via a conventional two-stage process, i.e. ring-opening polyaddition forming the poly(amic acid)s and further thermal or chemical imidization forming polyimides. The resulting polyimides exhibited good solubility in polar solvents, such as N,N-dimethylacetamide, N,N-dimethylformamide, N-methyl-2-pyrrolidinone and common solvents such as chloroform, tetrahydrofuran upon heating and possessed the inherent viscosities of 0.51-0.68 dL/g. The resulting strong and flexible films exhibited excellent thermal stability with the temperature at 10% weight loss is above 502 °C and the glass transition temperature in the range of 191-232 °C. The polyimides also were found to possess high optical transparency.     

Synthesis and characterization of novel fluorinated aromatic polyimides derived from 1,1‐bis(4‐amino‐3,5‐dimethylphenyl)‐1‐(3,5‐ditrifluoromethylphenyl)‐2,2,2‐trifluoroethane and various aromatic dianhydrides

A novel fluorinated aromatic diamine, 1,1‐bis(4‐amino‐3,5‐dimethylphenyl)‐1‐(3,5‐ditrifluoromethylphenyl)‐2,2,2‐trifluoroethane (9FMA), was synthesized by the coupling reaction of 3′,5′‐ditrifluoromethyl‐2,2,2‐trifluoroacetophenone with 2,6‐dimethylaniline under the catalysis of 2,6‐dimethylaniline hydrochloride. A series of fluorinated aromatic polyimides were synthesized from 9FMA and various aromatic dianhydrides, including pyromellitic dianhydride, 3,3′4,4′‐biphenyl tetracarboxylic dianhydride, 4,4′‐oxydiphthalic anhydride, 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride (BTDA), and 4,4′‐hexafluoroisopropylidene diphthalic anhydride, via a high‐temperature, one‐stage imidization process. The inherent viscosities of the polyimides ranged from 0.37 to 0.74 dL/g. All the polyimides were quickly soluble in many low‐boiling‐point organic solvents such as tetrahydrofuran, chloroform, and acetone as well as some polar organic solvents such as N‐methyl‐2‐pyrrolidinone, N,N′‐dimethylacetamide, and N,N′‐dimethylformamide. Freestanding fluorinated polyimide films could be prepared and exhibited good thermal stability with glass‐transition temperatures of 298–334 °C and outstanding mechanical properties with tensile strengths of 69–102 MPa and elongations at break of 3.3–9.9%. Moreover, the polyimide films possessed low dielectric constants of 2.70–3.09 and low moisture absorption (<0.58%). The films also exhibited good optical transparency with a cutoff wavelength of 303–351 nm. One polyimide (9FMA/BTDA) also exhibited an intrinsic negative photosensitivity, and a fine pattern could be obtained with a resolution of 5 μm after exposure at the i‐line (365‐nm) wavelength. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2665–2674, 2006     

Synthesis and properties of organosoluble polyimides based on novel perfluorinated monomer hexafluoro-2,4-toluenediamine

New highly fluorinated aromatic polyimides based on hexafluoro-2,4-toluenediamine and commercially available dianhydrides (6FDA and ODPA) were synthesized by one-pot high temperature polycondensation in benzoic acid melt. Owing to the CF₃ group and fluorine atoms in the meta-linked phenylenediamine fragment, these polyimides combine good solubility in organic solvents including such a low boiling point solvent as chloroform with high glass transition temperatures (330-345 °C), thermal and thermooxidative stability (T₅ is >500 °C). The highly fluorinated polyimide films (hydrogen content is ≤1%) exhibit good dielectric properties and low water absorption as well as excellent optical transparency in the UV-vis region (cut-off wavelength is 311 nm for 6FDA-based and 357 nm for ODPA-based polyimides), which is very important for optoelectronic materials.     

Characterizations and thermal stability of soluble polyimide derived from novel unsymmetrical diamine monomers

Two kinds of novel aromatic, unsymmetrical diamines with ether-ketone group, 3-amino-4′-(4-amino-2-trifluoromethylphenoxy)-benzophenone and 3-amino-4′-(4-aminophenoxy)-benzophenone, was successfully synthesized by two different synthetical routes and polymerized with various aromatic tetracarboxylic acid dianhydrides, including 4,4′-oxydiphthalic anhydride, 3,3′,4,4′-benzophenone tetracarboxylic dianhydride, and 2,2′-bis(3,4-dicarboxyphenyl)-hexafluoropropane dianhydride, via a conventional two-step thermal or chemical imidization method to produce a series of fluorinated polyimides. The polyimides were characterized with solubility tests, viscosity measurements, mechanical properties tests, IR-FT, and thermogravimetric analysis. The polyimides had inherent viscosities of 0.54-0.77 dL/g and were easily dissolved in both polar, aprotic solvents and common, low-boiling-point solvents. The resulting strong and flexible polyimide films exhibited excellent thermal stability, with decomposition temperatures (at 10% weight loss) above 573 °C and glass-transition temperatures in the range of 222-251 °C. Moreover, the polymer films showed outstanding mechanical properties, with tensile strengths of 86.5-121.6 MPa, elongations at break of 9-16%, and initial moduli of 1.26-1.97 GPa. These outstanding combined features ensure that the polymers are desirable candidate materials for advanced applications.     

Synthesis and characterization of novel fluorinated polyimides derived from 1,3-bis(4-amino-2-trifluoromethylphenoxy)naphthalene and aromatic dianhydrides

A new structurally asymmetric diamine monomer containing flexible ether linkages and bulky trifluoromethyl substituents, namely 1,3-bis(4-amino-2-trifluoromethylphenoxy)naphthalene, was prepared from 1,3-dihydroxynaphthalene and 2-chloro-5-nitrobenzotrifluoride. New series of fluorinated polyimides were synthesized from the diamine with six commercially available aromatic tetracarboxylic dianhydrides using a conventional two-stage process with thermal or chemical imidization. The resulting polyimides were highly soluble in a variety of organic solvents and could afford transparent and tough films via solution casting. These polyimides exhibited moderately high glass-transition temperatures (by DSC) of 236-268 °C and softening temperatures (by thermomechanical analysis) of 231-250 °C, and they did not show significant decomposition before 500 °C under either nitrogen or air atmosphere. Also, they revealed low moisture absorptions (0.32-0.78%), low dielectric constants (2.81-3.24 at 10 kHz), and high optical transparency (ultraviolet-visible absorption cutoff wavelengths of 377-426 nm).     

Synthesis and gas transport property of polyimide from 2,2′-disubstituted biphenyltetracarboxylic dianhydrides (BPDA)

A series of dianhydride monomers, 2,2′-disubstituted-4,4′,5,5′-biphenyltetracarboxylic dianhydride (substituents = phenoxy, p-methylphenoxy, p-tert-butylphenoxy, nitro, and methoxy) were synthesized by the nitration of an N-methyl protected 3,3′,4,4′-biphenyltetracarboxylic dianhydride (BPDA) and subsequent aromatic nucleophilic substitutions with aroxides (NaOAr) or methoxide. These dianhydrides were polymerized with various aromatic diamines in refluxing m-cresol containing isoquinoline to afford a series of aromatic polyimides. The effects of varying 2,2′-substituents of the dianhydride (BPDA) moiety on the properties of polyimides were investigated. It was found that polyimides from the dianhydrides containing phenoxy, p-methylphenoxy, and p-tert-butylphenoxy side groups possessed excellent solubility and film forming capability whereas polyimides from 2,2′-dinitro-BPDA and 2,2′-dimethoxy-BPDA were less soluble in organic solvent. The soluble polymers formed flexible, tough and transparent films. The films had a tensile strength, elongation at break, and Young’s modulus in the ranges 102-168 MPa, 8-21%, 2.02-2.38 GPa, respectively. The polymer gas permeability coefficients (P) and ideal selectivities for N₂, O₂, CO₂ and CH₄ were determined for the -OAr substituted polyimides. The oxygen permeability coefficient (P_O2) and permselectivity of oxygen to nitrogen (P_O2/N2) of the films were in the ranges 3.4-11.3 barrer and 3.8-4.6, respectively. The gas permeability typically increased with increasing free volume in the order of tert-butylphenoxy substituted PI > methylphenoxy substituted PI > phenoxy substituted PI.     

Formation of ordered macroporous films from fluorinated polyimide by water droplets templating

Preparation of honeycomb-patterned films from one of soluble fluorinated polyimides in a humid atmosphere was reported in this paper. This polyimide was synthesized from 2,2′-bis(3,4-dicarboxyphenyl)hexafluoropropane dianhydride (6FDA) and 2,2-bis[4-(4-aminophenoxy)phenyl]hexafluoropropane (BDAF) by two-steps method, which has excellent solubility both in strong bipolar solvents or in common low boiling-point solvents. The glass transition temperature of 6FDA-BDAF polyimide was determined by DSC and as 238 °C. Thermogravimetric analysis indicated that soluble fluoro-polyimide has good thermal stability with maximum thermal decomposition temperature of 545 °C in nitrogen atmosphere. The honeycomb-patterned films were obtained by casting a drop of polymer solution on a solid substrate in a humid atmosphere. Some influence factors, such as the solution concentration, the type of the solvent and the humidity, were also tested.     

Synthesis and characterization of fluorinated polyimides for pervaporation of n-heptane/thiophene mixtures

Soluble fluoro-polyimides have been synthesized by reacting of a fluorine-containing aromatic dianhydride, 2,2′-bis(3,4-dicarboxyphenyl)hexafluoropropane dianhydride, with aromatic diamine to yield poly(amic acid)s which were then cyclized to yield polyimide by chemical imidization method. The polyimides have excellent solubility both in strong bipolar solvents, such as NMP and DMAc, and in common organic solvents, such as THF and dioxane, etc. The glass transition temperature of these polyimides were determined by DSC and ranged from 281 to 289 °C. Thermogravimetric analysis indicated that these polyimides have good thermal stability with initial thermal decomposition temperature of 520-526 °C. The polyimide asymmetric membranes were prepared by phase inversion method and the inner structure was observed by method of SEM. The pervaporation properties of the prepared polyimides asymmetric membranes for n-heptane/thiophene mixtures were investigated at 40-77 °C and the permeation flux and the sulfur enrichment factor of the polyimide membranes are in the range of 0.56-1.68 kg/m² h and 3.12-2.24, respectively. The result demonstrated that the pervaporation method could be very effective method for desulfurization by polyimides asymmetric membranes with ultrathin skin.     

Synthesis and characterization of new polyimides containing pendent pentadecyl chains

A new unsymmetrical aromatic diamine, viz., 4-pentadecylbenzene-1,3-diamine was synthesized through a series of reaction steps starting from 3-pentadecylphenol. 4-Pentadecylbenzene-1,3-diamine was employed to synthesize a series of new polyimides by one-step polycondensation in m-cresol with four commercially available aromatic dianhydrides, viz., 3,3′,4,4′-biphenyltetracarboxylic dianhydride (BPDA), 3,3′,4,4′-benzophenonetetracarboxylic dianhydride (BTDA), 4,4′-oxydiphthalic anhydride (ODPA) and 4,4′-(hexafluoroisopropylidene)diphthalic anhydride (6-FDA). Inherent viscosities of resulting polyimides were in the range 0.33-0.67 dL/g and number average molecular weights were in the range 14,700-52,200 (GPC, polystyrene standard). Polyimides containing pendent pentadecyl chains were soluble in organic solvents such as chloroform, m-cresol, N,N-dimethylacetamide (DMAc), 1-methyl-2-pyrrolidinone (NMP), pyridine and nitrobenzene. Strong and flexible films of polyimides could be cast from their chloroform solutions. Polyimides exhibited glass transition temperature in the range 158-206 °C. The temperature at 10% wt. loss (T₁₀), determined by TGA in nitrogen atmosphere, of polyimides was in the range 470-480 °C indicating good thermal stability.     

Synthesis and Characterization of Fluorinated Polyimide Derived from 3,3′‐Diisopropyl‐4,4′‐diaminodiphenyl‐3′′,4′′‐difluorophenylmethane

A novel aromatic diamine monomer, 3,3′‐diisopropyl‐4,4′‐diaminodiphenyl‐3′′,4′′‐difluorophenylmethane (PAFM), was successfully synthesized by coupling of 2‐isopropylaniline and 3,4‐difluorobenzaldehyde. The aromatic diamine was adopted to synthesize a series of fluorinated polyimides by polycondensation with various dianhydrides: pyromellitic dianhydride (PMDA), 3,3′,4,4′‐biphenyltetracarboxylic dianhydride (BPDA), 4,4′‐oxydiphthalic anhydride (ODPA) and 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride (BTDA) via the conventional one‐step method. These polyimides presented excellent solubility in common organic solvents, such as N,N‐dimethylformamide (DMF), N,N‐dimethyl acetamide (DMAc), dimethyl sulfoxide (DMSO), N‐methyl‐2‐pyrrolidone (NMP), chloroform (CHCl₃), tetrahydrofuran (THF) and so on. The glass transition temperatures (T_g) of fluorinated polyimides were in the range of 260–306°C and the temperature at 10% weight loss in the range of 474–502°C. Their films showed the cut‐off wavelengths of 330–361 nm and higher than 80% transparency in a wavelength range of 385–463 nm. Moreover, polymer films exhibited low dielectric properties in the range of 2.76–2.96 at 1 MHz, as well as prominent mechanical properties with tensile strengths of 66.7–97.4 MPa, a tensile modulus of 1.7–2.1 GPa and elongation at break of 7.2%–12.9%. The polymer films also showed outstanding hydrophobicity with the contact angle in the range of 91.2°–97.9°.     

Some aromatic polyimides based on diamines containing hydrazo group and ether linkages

Three new hydrazo-bridged diamines, 4,4′-bis [4-(4-aminophenyloxy) phenylhydrazyl] biphenyl (BPD-2), 4,4′-bis [4-(4-aminophenyloxy) phenylhydrazyl] biphenyl ether (SPD-2) and 4,4-bis [4-(4-aminophenyloxy) phenyl] hydrazine (APD-2), were synthesized by the reduction of three azo-diols, 4,4′-bis (4-azo-1-hydroxyphenyl) biphenyl (BPD), 4,4′-bis (4-azo-1-hydroxyphenyl) biphenyl ether (SPD) and azo-4-hydroxybenzene (APD), and polymerized with pyromellitic dianhydride (PM), 3,3′,4,4′-benzophenone tetracarboxylic acid dianhydride (BP) and 3,4,9,10-perylenetetracarboxylic acid dianhydride (PR) either by one-step solution polymerization or by two-step procedure which includes ring-opening polyaddition to give poly(amic acid) followed by cyclic dehydration to polyimide. The monomers and polyimides were characterized by their elemental analyses, FTIR and ¹H NMR spectroscopy. Glass transition temperatures of the polymers are quite high (175-310 °C), characteristic of polyimides. The decomposition temperatures for 10% weight loss fall in the range of 280-575 °C in nitrogen. Activation energies of pyrolysis for each of the polymers calculated from Horowitz and Metzger's method are also high (52.54-95.28 kJ mol⁻¹). The inherent viscosities of the polyimides at a concentration of 0.5 g/dl in DMF range from 0.94 to 1.93 dl/g.     

Preparation and properties of thermally stable polyimides derived from asymmetric trifluoromethylated aromatic diamines and various dianhydrides

A novel method for the preparation of an asymmetric fluorinated aromatic diamine, 3,4′-bis(4-amino-2-trifluoromethylphenoxy)-benzophenone was investigated. This new diamine containing trifluoromethyl side group was synthesized from the nucleophilic substitution reaction of 2-chloro-5-nitrobenzotrifluoride and 3,4′-dihydroxybenzo phenone in the presence of potassium carbonate, followed by catalytic reduction with SnCl₂·6H₂O and concentrated hydrochloric acid. This novel diamine was used to react with different commercially available aromatic tetracarboxylic dianhydrides to prepare polyimides via thermal or chemical imidization. The polyimide properties such as inherent viscosity, solubility, thermal and surface properties were investigated to illustrate the contribution of the trifluoromethyl group and the asymmetry structure of the polyimide. The polyimides obtained had good thermal stability and the glass transition temperature values ranged from 225 to 267 °C. All of these novel polyimides held 10% weight loss at the temperature above 543 °C in air and left more than 47% residue even at 800 °C in nitrogen. The inherent viscosities of the obtained polyimides were above 0.73 dL/g and were easily dissolved in both polar, aprotic solvents and some low-boiling-point solvents. Moreover, these PI films had dielectric constants of 2.94-3.53 (1 kHz), with moisture absorption in the range of 0.07-0.34 wt%. In comparison of the PIs (5) series with the analogous symmetric PIs (6) series based on 4,4′-bis(4-amino-2-trifluoromethylphenoxy)-benzophenone, the (5) series revealed better solubility, low dielectric constant and moisture absorption.     

Novel fluorinated polyimides derived from 9,9-bis(4-amino-3,5-difluorophenyl)fluorene and aromatic dianhydrides

Novel fluorinated polyimides (PIs) were prepared from 9,9-bis(4-amino-3,5-difluorophenyl)fluorene with three aromatic dianhydrides via a one-step high-temperature polycondensation procedure. These obtained PIs showed excellent solubility and could be readily soluble in a variety of organic solvents such as NMP, DMAc, DMF, CHCl₃, CH₂Cl₂ and THF. All the PIs could afford flexible and strong films with low dielectric constants (2.62-2.79 at 1 MHz) and low moisture absorptions (0.18-0.41%). Thin films of these PIs exhibited high optical transparency and light color, with the cutoff wavelength at 341-355 nm and transmittance higher than 80% at 450 nm. Meanwhile, these PIs possessed eminent thermal stability, with decomposition temperatures (T_d) above 570 °C in both air and nitrogen atmospheres and glass transition temperatures (T_g) beyond 376 °C. Moreover, these fluorinated PI films showed low surface free energy and hydro-oleophobic character. The contact angles on the films for water and glycerol were in the range of 102.3-107.9° and 94.0-100.3°, respectively. In comparison with the analogous PI non-containing fluorine group, these fluorinated PIs showed better solubility, higher optical transparency, lower dielectric constants and lower surface free energy.