单分散钛酸锶纳米晶体的形成机理

采用水热法,利用乙醇和水的混合溶剂合成了单分散钛酸锶纳米晶体。X射线衍射(XRD)结果显示该晶体为立方相,延长反应时间其结晶性增强。扫描电子显微镜(SEM)、透射电子显微镜(TEM)结果显示样品为70nm左右的均匀立方块晶体。利用SEM、TEM、高分辨透射电子显微镜(HRTEM)和电子衍射(ED)谱研究了该纳米晶体的生长过程,结果表明:前驱体经过扩散反应生成钛酸锶晶核,晶核之间由于定向生长作用而团聚连接形成颗粒球,最后颗粒球在缓慢的奥斯特瓦尔德熟化作用下转化为钛酸锶晶体。这一“扩散反应、定向生长、奥斯特瓦尔德熟化”的生长过程揭示了钛酸锶纳米晶体的生长机理。利用Johnson-Mehl-Avrami(JMA)方程模拟证实了其初始阶段的扩散反应机理,并得出反应活化能为15.79kJ·mol^-1。     

钛酸钡纳米颗粒聚集球的形成机理

采用水热法合成了具有新颖结构的钛酸钡纳米颗粒聚集球.X射线衍射(XRD)结果显示该聚集球为立方相,随着时间的延长其结晶性增强.利用扫描电子显微镜(SEM)、透射电子显微镜(TEM)、高分辨透射电子显微镜(HRTEM)和电子衍射(ED)谱研究了该纳米颗粒聚集球的生长特点.结果表明该聚集球是由5-8nm的纳米颗粒定向连接生长而成,整个聚集球对外显示类单晶的现象.聚集球的大小约为60nm,随着时间的延长有长大的趋势.X射线能谱(EDX)分析结果和Johnson-Mehl-Avrami(JMA)方程动力学模拟结果表明,在颗粒球形成初始阶段主要是Ba2+离子的扩散成核作用占主导地位.这种"扩散成核-定向生长"的形成过程揭示了钛酸钡纳米颗粒聚集球的生长机理.     

ZnS纳米球的水热法制备及其光催化性能研究

在表面活性剂十六烷基三甲基溴化铵(CTAB)的辅助下,以乙酸锌为锌源,硫脲(NH₂)₂CS为硫源,使用水热法通过改变反应时间,成功制备了不同粒径的ZnS球状颗粒.利用X射线衍射(XRD)、扫描电子显微镜(SEM)、X射线能谱,高分辨透射电子显微镜(HRTEM))、紫外可见分光光谱和光致发光谱(PL)等测试手段对样品的晶体结构、形貌、光学性质进行了分析.通过对不同粒径的ZnS纳米颗粒对亚甲基蓝的光催化降解的催化活性进行了评估.实验结果表明:在表面活性剂CTAB的作用下,随着反应时间的增加,生成的ZnS晶核生长成纳米颗粒,然后ZnS纳米颗粒将进一步发生团聚从而形成平均粒径超过500nm的ZnS纳米球,但制备的ZnS产物的晶体结构均为立方纤锌矿结构.随着ZnS粒径的增加,样品的紫外吸收峰从418nm逐渐蓝移到362nm,而PL发射峰位的峰强随着粒径的增大而增强.光催化结果显示,反应12h制备的ZnS纳米球的光催化性能最佳.     

ZnS纳米球的水热法制备及其光催化性能研究

在表面活性剂十六烷基三甲基溴化铵(CTAB)的辅助下,以乙酸锌为锌源,硫脲(NH2)2CS为硫源,使用水热法通过改变反应时间,成功制备了不同粒径的ZnS球状颗粒。利用X射线衍射(XRD)、扫描电子显微镜(SEM)、X-射线能谱,高分辨透射电子显微镜(HRTEM))、紫外可见分光光谱和光致发光谱(PL)等测试手段对样品的晶体结构、形貌、光学性质进行了分析。通过对不同粒径的ZnS纳米颗粒对亚甲基蓝的光催化降解的催化活性进行了评估。实验结果表明:在表面活性剂CTAB的作用下,随着反应时间的增加,生成的ZnS晶核生长成纳米颗粒,然后ZnS纳米颗粒将进一步发生团聚从而形成平均粒径超过500nm的ZnS纳米球,但制备的ZnS产物的晶体结构均为立方纤锌矿结构。随着ZnS粒径的增加,样品的紫外吸收峰从418nm逐渐蓝移到362nm,而PL发射峰位的峰强随着粒径的增大而增强。光催化结果显示,反应12h制备的ZnS纳米球的光催化性能最佳。     

阴极等离子体电解法制备氧化铝纳米颗粒

以金属铝为阴极材料,以3mol·L-1浓度的NH4NO3水溶液为电解液,采用非对称电极阴极等离子体电解方法制备出氧化铝纳米颗粒.采用扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X射线能量色散谱(EDX)、X射线衍射(XRD)和X射线光电子能谱(XPS)对颗粒的形貌和结构进行了表征.结果表明颗粒以立方相Al2O3为主.还对放电过程的电流变化和发光现象进行了研究.结合实验结果提出了这种颗粒的生长机制.     

Ni2P@CoP3核壳纳米球的制备、表征及其用于超级电容器性能

利用水热技术先后获得Ni纳米球和Ni@Co(OH)_2海胆状核壳纳米球前驱体,通过高温煅烧法获得NiO@CoO核壳纳米球,再以次磷酸钠为原料,通过高温磷化法最终获得Ni_2P@CoP_3核壳纳米球。利用扫描电子显微镜(SEM)、透射电子显微镜(TEM)、高角度环形暗场像扫描透射电子显微镜(HAADF-STEM)、X射线粉末衍射仪(XRD)、能谱仪(EDS)及X射线光电子能谱(XPS)对产物的形貌、结构和组成进行表征。采用循环伏安(CV)、恒电流充放电(GCD)以及循环稳定性实验探索了电极材料的电化学性能。结果表明,Ni_2P@CoP_3核壳纳米球的直径约为400 nm,由六方系Ni_2P纳米核和立方相CoP_3纳米壳构成。相比单纯的Ni_2P或CoP_3纳米球,Ni_2P@CoP_3核壳纳米球发挥了复合结构的协同效应,更加有利于电解液的质子传递,促进了赝电容反应,表现出更高的比容量、稳定性和更长的循环寿命。     

纤维素调控合成羟基磷灰石纳米带

本文通过氨水扩散共沉淀法,在可溶纤维素的调控作用下制备得到了纳米带状羟基磷灰石。在120℃下加热回流高浓度氯化钙溶液和纤维素,作为后续合成羟基磷灰石的原料溶液。随后将磷酸二氢钠溶液加入到含有溶解纤维素和Ca2+离子原料溶液中,通过氨水扩散来提高溶液的pH值,从而引发羟基磷灰石从溶液中析出,反应一段时间后,收集析出样品。对照实验样品在不加纤维素条件下反应收集得到。通过扫描电子显微镜(SEM)、透射电子显微镜(TEM)、原子力显微镜(AFM)、傅立叶变换红外仪(FT-IR)和X射线衍射仪(XRD)分析了纤维素对HA晶体形貌和晶体结构的影响。结果显示,实验合成了超薄纳米带状羟基磷灰石晶体,该晶体的合成可能是因为纤维素分子杂化到了HA的晶体中。     

石墨烯-氧化钌纳米复合材料的水热法合成及电化学电容性能

通过水热法制备了石墨烯-氧化钌(G-RuO₂)纳米复合材料。对样品进行了X射线衍射(XRD),扫描电子显微镜(SEM),透射电子显微镜(TEM)和能量色散谱(EDS)表征。SEM结果表明氧化钌粒子均匀地分散在石墨烯层片上。TEM结果显示氧化钌纳米粒子的平均粒径约为3 nm。对样品进行了循环伏安和充放电性能测试,结果表明在1 A·g^-1的电流密度下,样品在H₂SO₄(1 mol·L^-1)溶液中具有219.7 F·g^-1的比电容。     

多孔氧化铁纳米盘的制备与表征

通过水热-高温处理两步法,合成了直径150～200 nm厚度40～80 nm的多孔α-Fe₂O₃纳米盘颗粒。并用X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、氮气吸附-脱附仪和震动样品磁强计(VSM)对样品进行了表征。对颗粒生长的机理进行了初步研究,结果表明磷酸根离子对α-Fe₂O₃纳米颗粒(001)面的选择性吸附在盘状颗粒的生长过程中起着重要作用。合成的多孔纳米盘颗粒BET比表面积为27 m²·g^-1,孔径在2～100 nm的范围内分布,样品还具有明显的铁磁性,较其他结构的α-Fe₂O₃纳米颗粒具有较高的矫顽力。     

微乳液中球形及棒状SrTiO3纳米粒子的控制合成

以氢氧化锶和钛酸四丁酯为原料, 在水溶液/Triton X-100/环己烷/正己醇反相微乳液体系中制备了直径约为20～80 nm的钛酸锶球形纳米粒子和长约300～1200 nm、直径约为30～150 nm的钛酸锶纳米棒. 用XRD, ICP, TEM, SAED和SEM对样品的结构、成分和形貌进行了表征; 用DLS分析了样品的粒度分布. 结果显示, 水与表面活性剂的物质的量比(ω₀)、反应物浓度、陈化时间等因素都能影响钛酸锶纳米粒子的形貌和尺寸. 所得钛酸锶的锶钛物质的量比约为1.0, 粒度分布较窄, 为立方相单晶结构.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).