碳热还原法制备V2O3-C双层包覆磷酸铁锂及其电化学性能

通过V₂O₅的碳热还原反应制备了具有优异倍率性能和循环稳定性的V₂O₃-C双层包覆的磷酸铁锂正极材料. 粉末X射线衍射、元素分析、高分辨投射电镜和拉曼光谱研究表明V2O3相与碳层共包覆于磷酸铁锂颗粒表面. 在V₂O₅的碳热还原反应后,碳含量明显降低,但石墨化程度未发生明显改变. 电化学测试结果表明少量V₂O₃显著改善了磷酸铁锂正极材料的倍率性能和高温循环性能,包含1%氧化钒的复合正极材料在0.2 C放电容量为167 mAh/g,5 C时放电容量为129 mAh/g,并且循环稳定性优异;在55 oC和1 C时放电容量为151 mAh/g,循环100次后无明显容量衰减.     

糠醇辅助的聚合凝胶法制备纳米Li4Ti5O12负极材料

以硝酸锂、钛酸正丁酯和糠醇为反应物,采用糠醇聚合凝胶法制备了纳米Li₄Ti₅O₁₂粉体．利用XRD、SEM和BET比表面测试对产物进行了表征,并研究了纳米Li₄Ti₅O₁₂粉体作为锂离子电池负极材料的电化学性能．在700℃或更高温度烧结时产物为纯相的尖晶石型．通过柠檬酸、聚乙烯吡咯烷酮、十六烷基三甲基溴化铵(CTAB)表面活性剂的加入能够减少产物颗粒的团聚程度,增大粉体的比表面积,提高其电化学性能．加入0.5 g CTAB、700℃烧结12 h的Li₄Ti₅O₁₂粉体展示出最高的比容量和最佳的循环性能,10 C下充电比容量高达156.7 mAh/g．     

纯Cr2O3包覆Li4Ti5O12微球的制备及其储锂性能研究

The pure Cr₂O₃ coated Li₄Ti₅O₁₂ microspheres were prepared by a facile and cheap solutionbased method with basic chromium(III) nitrate solution (pH=11.9). And their Li-storage properties were investigated as anode materials for lithium rechargeable batteries. The pure Cr₂O₃ works as an adhesive interface to strengthen the connections between Li₄Ti₅O₁₂ particles, providing more electric conduction channels, and reduce the inter-particle resistance. Moreover, LixCr₂O₃, formed by the lithiation of Cr₂O₃, can further stabilize Li₇Ti₅O₁₂ with high electric conductivity on the surface of particles. While in the acid chromium solution (pH=3.2) modification, besides Cr₂O₃, Li₂CrO₄ and TiO₂ phases were also found in the final product. Li₂CrO₄ is toxic and the presence of TiO₂ is not welcome to improve the electrochemical performance of Li₄Ti₅O₁₂ microspheres. The reversible capacity of 1% Cr₂O₃-coated sample with the basic chromium solution modification was 180 mAh/g at 0.1 C, and 134 mAh/g at 10 C. Moreover, it was even as high as 127 mAh/g at 5 C after 600 cycles. At-20℃, its reversible specific capacity was still as high as 118 mAh/g.     

Mn3O4包覆对LiNi0.5Mn1.5O4正极材料界面电化学性能的提高

本文采用化学湿磨法，首次将金属氧化物Mn₃O₄包覆于LiNi_0.5Mn_1.5O₄颗粒表面，使得电极材料的电子电导率从1.53×10^-7 S/cm 提高到3.15×10^-5 S/cm. 电化学测试结果表明Mn₃O₄包覆大大提高LiNi_0.5Mn_1.5O₄正极材料的倍率性能和高温循环稳定性. 最佳包覆样品为2.6wt% Mn₃O₄包覆的LiNi_0.5Mn_1.5O₄，在10 C倍率下具有108 mAh/g的高放电容并且在55 °C下100次循环后仍有78%的容量保持率，远大于未包覆样品67%的容量保持率.     

高性能的钛掺杂O3相O3-Na1-xCr1-xTixO2(x=0, 0.03, 0.05)用于钠离子电池正极材料的研究

本文通过凝胶热聚合路线合成了层状的O3相正极材料Na_1-xCr_1-xTi_xO₂(x=0, 0.03, 0.05),采用X射线衍射、扫描电子显微镜来分析其晶体结构和微观形貌. 研究发现,适量的钛掺杂有助于形成更均匀的颗粒并且会改变样品的颜色. 作为钠离子电池正极材料,Na//Na_0.97Cr_0.97Ti_0.03O₂具有非常高的库伦效率(首次高于96%),并且在2.0-3.6 V的电化学窗口下,用0.2 C的倍率循环100次,只有4%的容量衰减;在32 C倍率下有110 mAh/g的比容量.     

锂离子正极材料正交相γ-LiV2O5的制备及性能

分别采用LiOH·H₂O, NH₄VO₃, HNO₃, C₂H₅OH作为原料在没有PVP和有PVP存在下合成了棒状和棒束状两种相貌的γ-LiV₂O₅. 棒状γ-LiV₂O₅材料中棒的直径为500～800 nm,而棒束状的γ-LiV₂O₅材料则是直径为100～600 nm的棒组成的,形貌比较均匀. 同时研究了此体系中γ-LiV₂O₅的合成机制. 将合成的材料进行电化学测试,棒束状的γ-LiV₂O₅ 的电化学性能更好,在电流密度为30 mA/g时的初始放电比容量为269.3 mAh/g,循环20次之后容量仍保持在228 mAh/g.     

三维海胆状Co3O4的微纳结构制备及锂电池性能

水热法制备的合成海胆状Co₃O₄前驱物在空气中退火得到三维海胆状Co₃O₄的微纳结构. 采用FESEM、TEM、HRTEM以及XRD对产物进行形貌和结构的表征. 结果表明,合成的海胆状结构Co₃O₄由许多粒径约为15 nm的颗粒串接形成. 锂电池测试性能表明,制备的海胆状Co₃O₄首次放电容量达到1.369 Ah/g,经过20次循环     

LiFexMn1-xPO4固溶体的密度泛函理论与电化学研究

本文用DFT计算方法研究了LiFe_xMn_1-xPO₄的热力学稳定性和嵌/脱锂电位. 结果表明,LiFe_xMn_1-xPO₄固溶体的自由能比相分离的LiFePO₄/LiMnPO₄混合物略高,这两种形式可能在实际LiFe_xMn_1-xPO₄材料中共存. 计算表明,LiFe_xMn_1-xPO₄固溶体的嵌/脱锂电位随锰/铁比以及过渡金属离子的空间排列而变化,并用计算结果解释了放电曲线的形状. 采用固相反应法合成了LiFe_xMn_1-xPO₄材料并研究了其电化学性质,实验中观察到附加的放电平台,其出现可能与LiFe_xMn_1-xPO₄固溶体的存在有关.     

通过掺杂V和F提高碳包覆的磷酸铁锂锂离子电池的电化学性能

在原位聚合合成方法的基础上,结合两步烧结过程制得LiFe_1-xV_x(PO₄)_(3-y)/₃F_y/C.V和F掺杂对碳包覆的磷酸铁锂材料的结构、形貌和电化学性能有影响.通过XRD、FTIR、SEM、充/放电测试和电化学阻抗谱对材料的结构、形貌和电化学性能进行了表征.结果表明,V和F的掺杂并没有破坏橄榄石结构中的LiFePO₄/C,但可以提高晶体结构的稳定,降低电荷的转移阻抗,提高锂离子扩散速度,改善了LiFePO₄/C材料的循环性能和高倍率性能.     

一种新型Ag3PO4/Ag/Ag2Mo2O7纳米线光催化剂：三元纳米复合物的光催化活性

Ag₃PO₄/Ag/Ag₂Mo₂O₇ composite photocatalyst was successfully prepared via an in situ precipitation method. The as-prepared Ag₃PO₄/Ag/Ag₂Mo₂O₇ nanocomposite included Ag₃PO₄ nanoparticles (NPs) as well as Ag NPs assembling on the surface of Ag₂Mo₂O₇ nanowires. Under visible light irradiation (λ>420 nm), the Ag₃PO₄/Ag/Ag₂Mo₂O₇ composite degraded rhodamine B (Rh B) efficiently and showed much higher photocatalytic efficiency than pure Ag₃PO₄, Ag₂Mo₂O₇, or Ag₃PO₄/Ag₂Mo₂O₇. It was elucidated that the excellent photocatalytic performance of Ag₃PO₄/Ag/Ag₂Mo₂O₇ for the degradation of Rh B under visible light could be ascribed to the high specific surface area, the extended absorption in the visible light region resulting from the Ag₃PO₄/Ag loading, and the efficient separation of photogenerated electrons and holes through the ternary heterostrucure composed of Ag₃PO₄, Ag and Ag₂Mo₂O₇.     

Preparation and characterization of Li3V2(PO4)3/MWCNTs cathode material for lithium-ion batteries

The Li₃V₂(PO₄)₃/multiwalled carbon nanotubes (LVP/MWCNTs) composite is successfully synthesized by a sol?Cgel route using oxalic acid as the chelating reagent. Its structure and physicochemical properties are investigated using X-ray diffraction, field-emission scanning electron microscopy, and electrochemical methods. LVP particles are well mixed with MWCNTs, and most of them are around 100?nm. The galvanostatic charge?Cdischarge tests show that LVP/MWCNTs electrode owns an initial discharge capacity of 126?mAh?g^?1 at 0.5 C with capacity retention of 94% during the 100th cycle in the voltage range of 3.0?C4.3?V. A superior rate capability is also achieved, e.g., exhibiting discharge capacities of 75 and 58?mAh?g^?1 at high C rates of 10 and 15 C, respectively.     

Enhanced electrochemical performance of lithium ion battery cathode Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>/C

Li-ion battery cathode material lithium-vanadium-phosphate Li₃V₂(PO₄)₃ was synthesized by a carbon-thermal reduction method, using stearic acid, LiH₂PO₄, and V₂O₅ as raw materials. And stearic acid acted as reductant, carbon source, and surface active agent. The effect of its content on the crystal structure and electrochemical performance of Li₃V₂(PO₄)₃/C were characterized by XRD and electrochemical performance testing, respectively. The results showed that the content of carbon source has no significant effect on the crystal structure of lithium vanadium phosphate. Lihtium vanadium phosphate obtained with 12.3% stearic acid demonstrated the best electrochemical properties with a typical discharge capacity of 119.4 mAh/g at 0.1 C and capacity retention behavior of 98.5% after 50 cycles. And it has high reversible discharge capacity of 83 mAh/g at 5 C with the voltage window of 3 to 4.3 V.     

Synthesis of Li3V2(PO4)3/reduced graphene oxide cathode material with high-rate capability

The Li₃V₂(PO₄)₃/reduced graphene oxide (LVP/rGO) composite is successfully synthesized by a conventional solid-state reaction with a high yield of 10 g, which is suitable for large-scale production. Its structure and physicochemical properties are investigated using X-ray diffraction, Raman spectra, field-emission scanning electron microscopy, transmission electron microscopy, and electrochemical methods. The rGO content is as low as ~3 wt%, and LVP particles are strongly adhered to the surface of the rGO layer and/or enwrapped into the rGO sheets, which can facilitate the fast charge transfer within the whole electrode and to the current collector. The galvanostatic charge–discharge tests show that the LVP/rGO electrode delivers an initial discharge capacity of 177 mAh g^?1 at 0.5 C with capacity retention of 88 % during the 50th cycle in a wide voltage range of 3.0–4.8 V. A superior rate capability is also achieved, e.g., exhibiting discharge capacities of 137 and 117 mAh g^?1 during the 50th cycle at high C rates of 2 and 5 C, respectively.     

Synthesis of high performance Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>/C cathode material by ultrasonic-assisted sol–gel method

A novel ultrasonic-assisted sol–gel method is proposed to prepare Li₃V₂(PO₄)₃/C cathode material. X-ray diffraction analyses show that both Li₃V₂(PO₄)₃/C(A) synthesized by the ultrasonic-assisted sol–gel method and Li₃V₂(PO₄)₃/C(B) synthesized by a traditional sol–gel method have monoclinic structure. Scanning electron microscopy images indicate that the Li₃V₂(PO₄)₃/C(A) composite has a more uniform morphology than that of the Li₃V₂(PO₄)₃/C(B) composite. In the voltage range of 3.0–4.3 V (vs. Li/Li⁺), the initial specific discharge capacities of the Li₃V₂(PO₄)₃/C(A) and Li₃V₂(PO₄)₃/C(B) samples are 129.8 and 125.9 mAh g⁻¹ at 1C rate (1C = 133 mA g⁻¹), respectively. Furthermore, at 2-C charge/10-C discharge rate, the specific discharge capacity of the Li₃V₂(PO₄)₃/C(A) composite retains 113.2 mAh g⁻¹ after 50 cycles, but the Li₃V₂(PO₄)₃/C(B) composite only presents a capacity of 94.8 mAh g⁻¹.     

Investigations on the synthesis and electrochemical performance of Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>/C by different methods

Li₃V₂(PO₄)₃/C samples were synthesized by two different synthesis methods. Their influence on electrochemical performances of Li₃V₂(PO₄)₃/C as cathode materials for lithium-ion batteries was investigated. The structure and morphology of Li₃V₂(PO₄)₃/C samples were characterized by X-ray diffraction and scanning electron microscopy. Electrochemical performance was characterized by charge/discharge, cyclic voltammetry, and alternating current (AC) impedance measurements. Li₃V₂(PO₄)₃/C with smaller grain size showed better performances in terms of the discharge capacity and cycle stability. The improved electrochemical properties of the Li₃V₂(PO₄)₃/C were attributed to the decreasing grain size and enhanced electrical conductivity produced via low temperature route. AC impedance measurements also showed that the Li₃V₂(PO₄)₃/C synthesized by low temperature route significantly decreased the charge-transfer resistance and shortened the migration distance of lithium ion.     

Electrochemical behavior of Mg-doped 7LiFePO4–Li3V2(PO4)3 composite cathode material for lithium-ion batteries

Mg-doping effects on the electrochemical property of LiFePO₄–Li₃V₂(PO₄)₃ composite materials, a mutual-doping system, are investigated. X-ray diffraction study indicates that Mg doping decreases the cell volume of LiFePO₄ in the composite. The cyclic voltammograms reveal that the reversibility of the electrode reaction and the diffusion of lithium ion is enhanced by Mg doping. Mg doping also improves the conductivity and rate capacity of 7LiFePO₄–Li₃V₂(PO₄)₃ composite material and decreases the polarization of the electrode reaction. The discharge capacity of the Mg-doped composite was 93 mAh?g^?1 at the current density of 1,500 mA?g^?1, and Mg-doped composite has better discharge performance than the original 7LiFePO₄–Li₃V₂(PO₄)₃ composite at low temperature, too. At ?30 °C, the discharge capacity of Mg-doped LFVP is 89 mAh?g^?1, higher than that of the original composite. Electrochemical impedance spectroscopy study shows that Mg²⁺ doping could enhance the electrochemical activity of 7LiFePO₄–Li₃V₂(PO₄)₃ composite. Mg doping has a positive influence on the electrochemical performance of the LiFePO₄–Li₃V₂(PO₄)₃ composite material.     

The electrochemical insertion properties of sodium vanadium fluorophosphate,Na3V2(PO4)2F3

The structural and alkali ion insertion characteristics of sodium vanadium fluorophosphate, Na₃V₂(PO₄)₂F₃ are presented. The material was prepared using a solid-state carbothermal reduction approach involving the precursors VPO₄ and NaF. Electrochemical characterization of the Na₃V₂(PO₄)₂F₃ phase in the potential range 3.0–4.6 V vs. Li, revealed a structured voltage response corresponding to the reversible cycling of two alkali ions per formula unit. The associated specific capacity was around 120 mAh/g, at an average discharge voltage of around 4.1 V vs. Li. The stability of the alkali ion insertion reactions was confirmed by long term cycling experiments, which demonstrated low capacity fade over the initial 220 cycles. Voltage excursions to 5 V vs. Li suggest that all three Na ions may be successfully extracted from the fluorophosphate phase, although this process is likely accompanied by some concurrent structural degradation.     

Li3V2(PO4)3 modified LiFePO4/C cathode materials with improved high-rate and low-temperature properties

LiFePO₄/C surface modified with Li₃V₂(PO₄)₃ is prepared with a sol–gel combustion method. The structure and electrochemical behavior of the material are studied using a wide range of techniques such as X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope, galvanostatic charge–discharge, and electrochemical impedance spectroscopy. It is found that LiFePO₄/C surface modified with Li₃V₂(PO₄)₃ has the better electrochemical performance. The discharge capacity of the as-prepared material can reach up to 153.1, 137.7, 113.6, and 93.3 mAh g^?1 at 1, 2, 5, and 10 C, respectively. The capacitance of the LiFePO₄/C modified by Li₃V₂(PO₄)₃ is higher under lower discharging rate at ?20 °C, and the initial discharge capacity of 0.2 C is 131.4 mAh g^?1. It is also demonstrated that the presence of Li₃V₂(PO₄)₃ in the sample can reduce the charge transfer resistance in the range of ?20 to 25 °C, resulting in the enhanced electrochemical catalytic activity.     

Synthesis of flower-like Li3V2(PO4)3/C cathode with mixed morphology for advanced lithium-ion batteries

A rheological phase-assisted ball milling method was developed to synthesize of flower-like Li₃V₂(PO₄)₃/C composites consisting of nanofibers and nanoplate porous microstructure. The flower-like Li₃V₂(PO₄)₃/C composite delivered specific capacities of 120 and 108 mAh g^?1 at 0.5 and 10 C rates, respectively. A capacity retention of 99.5 % was sustained after 100 cycles at a 10-C cycling rate. The remarkable performance was attributed to the porous nanostructures that provide short electron/ion diffusion distance and large electrode/electrolyte contact area.