时间切片离子速度成像技术关于MgO在193 nm的光解反应动力学研究

本文利用时间切片离子速度成像技术对MgO分子在193 nm下的光解反应动力学进行了研究. 实验通过产物Mg的速度和角度分布分析,发现了三个光解反应路径. 路径一为MgO(X¹Σ⁺)态分子吸收一个光子到MgO(G¹π) 态,由于G¹π, 3³π和1⁵π态之间的自旋轨道耦合作用,反应沿着1⁵π的势能面解离生成产物Mg(³P_u)+O(³P_g). 路径二、三分别为MgO(A¹π)态分子吸收一个光子到MgO(G¹π)态和MgO(4¹π) 态,进而解离生成产物Mg(³P_u)+O(³P_g)和Mg(¹S_g)+O(¹S_g). 光解离路径的各向异性参数与振动能级的寿命以及转动和振动自旋轨道态的耦合有关. 从总动能分析得到D₀(Mg-O)=21645±50 cm^-1.     

N,N-二甲基硫代乙酰胺S3(ππ*)态的衰变动力学 (cited: 1)

采用共振拉曼光谱和完全活化空间自洽场方法研究了N,N-二甲基硫代乙酰胺在被激发至S₃(ππ^*)态后的衰减动力学. 指认了紫外吸收光谱和振动光谱. 获得了乙腈、甲醇和水溶剂中不同激发波长下的A带共振拉曼光谱,以探测Franck-Condon区域的结构动力学. 开展了CASSCF计算以确定低能单重激发态和锥形交叉点的电子激发能和优化几何结构. 通过共振拉曼强度分析和CASSCF计算获得了结构参数、A带结构动力学和S₃(ππ^*)态衰减机制. 提出了主要衰减通道为_3,FC(ππ^*)→S₃(ππ^*)/S₁(nπ^*)→_1(nπ^*).     

2-羟基吡啶S1态超快动力学

本文利用飞秒时间分辨的光电子成像技术研究了2-羟基吡啶分子在276.9∽250.0 nm波长范围的紫外光激发条件下S₁态的衰变动力学. 根据衰变动力学的泵浦波长相关性,提出了一种衰变机制. 在276.9 nm泵浦波长下,S₁态主要通过系间穿越到更低的三重态衰变. 在264.0 nm泵浦波长下,系间穿越到三重态和内转换到基态的通道同时存在. 在250.0 nm泵浦波长下,内转换到基态过程占据主导.     

苯乙炔分子电子激发态超快动力学研究

采用飞秒时间分辨质谱技术结合飞秒时间分辨光电子影像技术研究了苯乙炔分子电子激发态超快非绝热弛豫动力学.用235 nm光作为泵浦光,将苯乙炔分子激发到第二激发态S2,用400 nm光探测激发态的演化过程.时间分辨的母体离子的变化曲线用指数和高斯函数卷积得到不同的两个组分,一个是超快衰减组分,时间常数为116 fs,一个是慢速组分,时间常数为106 ps.通过分析时间分辨的光电子影像得到光电子动能分布,结合时间分辨光电子能谱数据发现,时间常数为116 fs的快速组分反映了S2态向S1态的内转换过程.实验还表明S1态通过内转换被布局后向T1态的系间窜跃过程为重要的衰减通道.本工作为苯乙炔分子S2态非绝热弛豫动力学提供了较清晰的物理图像.     

紫外光诱导光电子发射负离子源的阈值光电子成像仪设计 (cited: 2)

设计了一套紧凑的光电子成像装置,它包括解离式光电子贴附负离子源、垂直安装的高分辨阈值光电子速度成像装置和线性飞行时间质谱仪．紫外光辐射金属表面诱导低能光电子发射,再通过低能电子贴附超声分子束产生高强度和冷的负离子源．结合这种负离子源和飞行时间质谱-光电子成像仪装置,仪器的质量分辨能达到200左右,能量分辨优于3%(即对1 eV动能的电子,分辨达到30 meV)．此外,使用该实验装置获得了CH₃S^-和S₂^-在611.46 nm下的低能阈值光电子成像结果．同时得到了CH₃S和S₂的更精确的电子亲和势分别为1.8626±0.0020和1.6744±0.0035 eV．初步的结果证明了该装置对研究阈值光电子成像精确测量光电子亲和势非常有效     

飞秒时间分辨拉曼光谱用于研究β-胡萝卜素单重激发态内转换和振动弛豫过程

搭建了飞秒时间分辨受激拉曼光谱(FSRS)装置，并用于研究全反式β-胡萝卜素单重电子激发态超快内转换和振动弛豫过程.基于三脉冲“抽运-探测”方案搭建的时间分辨受激拉曼光谱装置同时实现了150fs的时间分辨率和23.7cm^-1的光谱分辨率，光谱检测范围为300—4000cm^-1.对全反式β-胡萝卜素电子激发态的飞秒时间分辨拉曼光谱研究表明，β-胡萝卜素被激发到S₂态后，经由寿命约为0.3ps的中间态S_X态实     

N-乙基吡咯S1态超快动力学：飞秒时间分辨光电子成像研究

N-乙基吡咯是吡咯分子的一个乙基取代衍生物,它的激发态衰变动力学目前为止很少被研究. 本文利用飞秒时间分辨光电子成像的实验方法研究N-乙基吡咯分子S₁态的衰变动力学. 实验采用241.9和237.7 nm的泵浦激发波长. 在241.9 nm激发下,得到5.0±0.7 ps,66.4±15.6 ps和1.3±0.1 ns三个寿命常数. 在237.7 nm激发下,得到2.1±0.1 ps和13.1±1.2 ps两个寿命常数. 所有寿命常数都归属为S₁态的振动态. 本文并对不同S₁振动态的弛豫机理进行了讨论.     

苯基叠氮在光吸收激发态上的结构动力学-共振拉曼和量子力学计算研究

采用共振拉曼光谱学和完全活化空间自洽场方法研究了苯基叠氮被激发到S₂(A')、S₃(A')和S₆(A')光吸收态后的结构动力学. 基于傅立叶变换拉曼、傅立叶变换红外、紫外、密度泛函计算和简正模式分析,指认了紫外吸收光谱和振动光谱. 获得了环己烷、乙腈和甲醇溶剂中273.9、252.7、245.9、228.7、223.1和208.8 nm等不同激发波长下的A、B和C带共振拉曼光谱,以探测Franck-Condon区域的结构动力学. CASSCF计算获得了单重电子激发态能量最低点和势能面交叉点的电子激发能和优化几何结构. 结果表明,苯基叠氮在S₂(A')、S₃(A')和S₆(A')态上的激发态结构动力学各不相同. 与Kasha规则相符,S₂S₁(1)和S₂S₁(2)势能面交叉点在S₂(A')激发态衰变动力学和N7=N8键解离中扮演着重要角色. 提出了两条主要衰减通道：S_2,min→S₀辐射通道和S_2,FC(ππ^*)→S₂(ππ^*)/S₁(nπ^*)→S₁(nπ^*)非辐射通道.     

2-三氟甲基吡啶的转动光谱及分子结构研究

本文测定了2-三氟甲基吡啶在2∽20 GHz频率范围内的高分辨转动光谱. 测定了转动常数、¹⁴N核四极耦合常数及离心畸变常数等一系列光谱参数. 同时还在自然丰度下测定了5个¹³C和1个¹⁴N单取代同位素异数体的光谱数据. 实验结果结合从头算准确地推导出2-三氟甲基吡啶的骨架结构. 实验测得同位素异数体的平面转动惯量P_cc数值均为44.46 u?²，表明此分子具有C_s对称性. 此外，本文计算了吡啶、2-氟吡啶、2-甲基吡啶和2-三氟甲基吡啶的分子表面静电势，以此分析了三氟甲基的取代对电子分布的影响.     

3-二甲氨基-2-甲基丙烯醛S2激发态结构动力学 (cited: 3)

采用共振拉曼光谱和完全活性自洽场理论计算研究了3-二甲氨基-2-甲基丙烯醛(DMAMP)光激发到S₂(ππ^*)态后的光物理性能．在B3LYP/6-311++G(d,p)水平计算确定了DMAMP与其三种异构体之间的基态异构化能垒,指认了振动光谱．采用涵盖紫外强吸收带的激光波长,获得了DMAMP在环己烷、乙腈和甲醇溶剂中的A-带共振拉曼光谱,含时密度泛函方法计算确定了该光谱中基频的相对强度,发现振动-电子耦合发生在S₂(ππ^*)态的Franck-Condon区域．CASSCF计算方法确定低单重和三重激发态、势能面锥形交叉点和系间窜跃点的激发能．共振拉曼光谱强度模式分析和CASSCF计算获得了DMAMP的A-带短时结构动力学和其后的衰变动力学表明,C1=O6和C2=C3之间的瞬时去共轭效应发生在S₂(ππ^*)态的Franck-Condon区域,激发态电荷重分布机制表明,C3和二甲氨基之间以及C1和C2之间的共轭增强效应发生在波包离开Franck-Condon区域后．C1=O6和C2=C3之间的去共轭效应使得-C3=N(CH₃)₂沿着C2-C3键旋转更加容易,C1-C2之间以及C3和N(CH₃)的共轭增强效应使得绕C1-C2和C3-N5旋转变得比较困难．这些表明DMAMP初始结构动力学沿着CI-1(S₂/S₀)交叉点展开,而沿CI-2(S₂/S₀)和CI-3(S₂/S₀)交叉点展开的几率可以忽略．提出了DMAMP分子受光激发从S_2,FC(ππ^*)经由各锥形交叉点和各系间窜跃点回到S₀或T_1,min的两个衰变通道.     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.     

A stereo matching algorithm using multi-peak candidate matches and geometric constraints

Gray cross correlation matching technique is adopted to extract candidate matches with gray cross correla- tion coefficients less than some certain range of maximal correlation coefficient called multi-peak candidate matches. Multi-peak candidates are extracted corresponding to three closest feature points at first. The corresponding multi-peak candidate matches are used to construct the model polygon. Correspondence is determined based on the local geometric relations between the three feature points and the multi-peak candidates. The disparity test and the global consistency checkout are applied to eliminate the remaining ambiguous matches that are not removed by the local geometric relational test. Experimental results show that the proposed algorithm is feasible and accurate.