一种用激光干涉测量光波波长的新方法

提出了一种利用激光干涉仪测量光波波长的方法。通过改变在光的传播路径上垂直放置的透明玻璃与光传播方向的角度,使相干光的光程差发生变化;利用干涉条纹与转过角度、透明玻璃厚度之间的关系,通过激光干涉实验能准确测量出光波的波长。     

云纹干涉载频调制技术及分析

在物体变形场的测量中,云纹干涉的载频调制技术有重要作用.在云纹干涉中,对称光照明产生的衍射光沿试件栅表面的法线传播并产生干涉.通过改变照明光的入射角度,可实现变形条纹场的空间调制.通过光程差的分析说明了载波条纹产生的机理,得出了载波频率与照明光入射角度变化之间的关系式.利用三点弯曲加载结合二维载频调制实验,给出了实验结果.证明了在初始条纹较少的情况下,载频调制技术能有效地测量物体的位移场.     

气泡的远场干涉分析及应用

提出了一种分析气泡远场干涉的理论模型。平行激光束照射到透明介质中的气泡上,折射光束与全反射光束在远场发生干涉形成内密外疏圆环状干涉条纹,推求了两平行出射光线的光程差公式和两光线之间的距离公式,分析了圆环状干涉条纹内密外疏的原因,给出了计算干涉条纹存在区域和最高干涉级的方法。通过干涉方法可以测量气泡的直径,能够用于介质深处气泡尺寸的测量。利用远场干涉对玻璃水箱、平板玻璃、玻璃棱镜中的气泡直径进行了测量,其中玻璃棱镜中气泡直径测量结果与用阿贝比长仪测量结果对比,相对差为0.9%。预期了气泡远场干涉在运动气泡尺寸、泡内气体折射率、透明光疏介质中光密介质球尺寸测量等方面的应用。     

迈克耳孙干涉实验

描述了迈克耳孙干涉仪的结构、原理和调节方法,对非定域干涉和定域干涉的成像过程和干涉条纹特点进行了分析,实现了氦氖激光波长和透明玻璃薄片折射率的测量实验,并对透明玻璃薄片折射率测量实验的调节方法和实验现象进行了详细讨论.     

基于PASCO平台的透明材料折射率的测量

将迈克耳孙干涉仪和PASCO实验平台相结合,设计了一种高精度、高效率测量透明材料折射率的方法.首先分析PASCO迈克耳孙干涉仪测量材料折射率的原理,然后利用高性能PASCO传感器和计算机对干涉条纹进行图像采集和数据处理,得到待测透明材料的折射率信息.最后对材料折射率的不确定度进行探究.实验结果表明,旋转角度θ对折射率的不确定度影响最大,厚度d次之,干涉条纹计数K影响最小.PASCO实验平台配合迈克耳孙干涉仪可以准确、高效的记录干涉条纹在"吞吐"时光强的变化,降低条纹计数测量的不确定度,从而提高透明材料折射率的计算精度.同时该方法还可用于和透明材料折射率相关的其他特性的测量.     

迈克尔逊干涉仪测透明介质厚度及折射率

提出了使用用迈克尔逊干涉仪,改变光源入射方式及观测方式以获得稳定、清晰等厚干涉现象的方法.探究了在光路中插入的被测透明介质如何对等厚干涉条纹产生影响,并导出了被测介质厚度、折射率及旋转角度与等厚干涉条纹移动量之间的关系.实现对透明介质厚度、折射率进行简练、快速的同时测量.     

各向异性介质的平行平板干涉

提出了各向异性介质平行平板干涉中的相位差计算方法.证明了e光干涉产生的条纹为严格的椭圆曲线,椭圆长短轴的比值等于o光主折射率与e光主折射率之比,而与晶体厚度、干涉级等参数无关.拍摄了实验干涉图,并用最小二乘法对干涉条纹进行椭圆曲线拟合,结果与理论完全一致.本文提出的方法可用于晶体主折射率比值的精确简便测量.     

利用激光干涉条纹对透明玻璃碎片进行同一认定的研究

两块或多块玻璃是否同属于一块玻璃，是在刑事检验鉴定中经常遇到的问题。由于透明平面玻璃的折射率均匀，干涉条纹有明显的规律和较强的连续性，其干涉条纹只受厚度的影响，所以，利用激光作为光源，采用干涉条纹法，通过比较玻璃干涉条纹的形状、特点、取向是否一致以及接口处的干涉条纹是否连续、规律、无重叠现象、是否吻合对接等特征来判断两块或多块玻璃碎片是否同属于一个整体。干涉条纹法是一种较好的同一认定手段，并在检验鉴定实践中得到了证明     

掠入射法测量液体折射率实验现象分析

掠入射法是基于全反射定律,采用几何光学原理来测量液体折射率的一种方法.文中对掠入射法测量透明液体折射率实验中出现的干涉条纹进行了定量分析,认为在分光计望远镜中观察到的干涉条纹是光线进入辅助透镜和直角棱镜间被测薄液膜干涉形成的,通过定义干涉条纹疏密度,对于薄膜引起的光程差与干涉明纹(或暗纹)间距两者间的关系进行讨论,其讨论的结果与实验结果一致.     

四波混频实时光学检测

分析了利用掺铁铌酸锂晶体作介质的简并四波混频及其在干涉计量术中应用的原理,描述了被测透明样品的表面各光波及其干涉形成的透射条纹及反射条纹,利用光折变晶体的介电驰豫特性,求得透射条纹和反射条纹的对比度随时间变化的公式及各参数的相互关系。对由透射条纹及反射条纹计算被测透明物体样品折射率和厚度不均匀性的方法作了数学分析,提出一种新型四波混频实时测量透明物体的光学不均匀性的方法和实验光路,对相关参数对测量过程及测量结果的影响作了探讨,得到了平板玻璃样品的干涉条纹图像,计算出实验结果。     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Research on beamforming method for dual-line array with space mismatch between the two line arrays

The performance of port/starboard discrimination of dual-line array will be seriously degraded when the space between the two line arrays of the dual-line array is mismatched. The directivity function of the delay-sum and delay-subtract beamforming is deduced and the port/starboard discrimination of the delay-sum and delay-subtract beamforming is also studied both under the ideal status and the status under which the space between the two line arrays of the dual-line array is mismatched. Analysis results show the delay-subtract beamforming has better performance of port/starboard discrimination. At last, the sea trial results demonstrate the theoretical results.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Retrieval of ultraviolet skylight radiances and O3 slant column densities from balloon-borne limb spectrometer

With a novel light-weight and absolutely calibrated ultraviolet （UV） spectrometer, UV skylight radiances and O3 slant column densities are measured by balloon-borne limb measurements in Xinjiang area, China. UV skylight radiances measured at the height of 31 km are compared with the results from Modtran in the wavelength range from 290 to 420 nm. O3 slant column densities are derived from radiance spectra in the Huggins bands （320 - 335 nm） using differential optical absorption spectroscopy method. And the parameter exhibits a good correlation with the same value simulated by radiative transfer model （Tracy）. The O3 profile simultaneously measured by an O3 sonde is used as input in Tracy calculations. The O3 sonde is launched on the same balloon.     

Design optimization of highly sensitive LSPR enhanced surface plasmon resonance biosensors with nanoholes

For breaking through the sensitivity limitation of conventional surface plasmon resonance (SPR) biosensors, novel highly sensitive SPR biosensors with Au nanoparticles and nanogratings enhancement have been proposed recently.But in practice, these structures have obvious disadvantages.In this study, a nanohole based sensitivity enhancement SPR biosensor is proposed and the influence of different structural parameters on the performance is investigated by using rigorous coupled wave analysis (RCWA).Electromagnetic field distributions around the nanohole are also given out to directly explain the performance difference for various structural parameters.The results indicate that significant sensitivity increase is associated with localized surface plasmons (LSPs) excitation mediated by nanoholes.Except to outcome the weakness of other LSP based biosensors, larger resonance angle shift, reflectance amplitude, and sharper SPR curves' width are obtained simultaneously under optimized structural parameters.     

Polymer gratings based on photopolymerization for low-order distributed feedback polymer lasers

Novel polymer distributed feedback(DFB)gratings are fabricated based on photopolymerization to reduce lasing threshold of polymer lasers.A photopolymer formulation sensitive to 355-nm ultraviolet(UV)light is proposed for the fabrication of polymer gratings and it can be used to form polymer films by spin-coating process.A very low surface-relief depth ranging from 12.5 to about 1.0 nm has been demonstrated with a refractive-index modulation of about 0.012.The experimental results indicate that such polymer gratings have promising potentials for the fabrication of low-order DFB organic semiconductor lasers.