2-(羟甲基)-N-甲基咪唑桥联Mn_2~ⅡMn_2~Ⅲ四核配合物的合成、结构和磁性

报道了3个2-(羟甲基)-N-甲基咪唑(Hhmmi)桥联的MnⅡ2MnⅢ2四核配合物[Mn4(hmmi)6(DMF)2·(N3)2](ClO4)2(1),[Mn4(hmmi)6(H2O)2(N3)2](ClO4)2(2)和[Mn4(hmmi)6Cl4]·6CH3CN(3·6CH3CN)的合成、晶体结构和磁性.在配合物1~3中,中心结构皆为四核蝶形混合价Mn结构,2个MnⅡ占据蝶形两翼位置,2个MnⅢ占据蝶形中间位置.MnⅢ离子间通过hmmi-上的μ3-烷氧原子桥联,相应MnⅢ—O—MnⅢ键角为101.3°~103.4°;而MnⅢ-MnⅡ离子间通过hmmi-上的μ3-和μ2-烷氧原子桥联,相应MnⅢ—O—MnⅡ键角为92.5°~113.7°.对配合物1~3进行变温磁化率拟合,结果表明,MnⅢ-MnⅢ间呈铁磁相互作用,而MnⅢ-MnⅡ间以及Mn4分子间存在较弱的铁磁或反铁磁耦合.     

由二茂铁基羧酸以及苯并咪唑基配体构筑的两个镉(Ⅱ)配合物的合成、晶体结构及性质

使3-二茂铁-2-丁烯酸钠(FcC(CH3)=CHCOONa,Fc=(η5-C5H4)Fe(η5-C5H5))和1,3-二(1-H-苯并咪唑基)丙烷(L1)与Cd(Ⅱ)在溶液中反应,或使邻羧基苯甲酰二茂铁钠(o-FcCOC6H4COONa)和1,4-二(2-H-苯并咪唑基)丁烷(L2)与Cd(Ⅱ)在溶液中反应,分别得到了一维链状配位聚合物[Cd(η2-FcC(CH3)=CHCOO)(L1)CI]n(1)和单核环状配合物[Cd(η2-o-FcCOC6H4COO)(L2)(H2O)]·NO3·DMF·H2O(2).采用红外、元素分析以及单晶衍射表征了这两个配合物的分子结构;研究了它们的热性能以及在DMF溶液中的电化学性能.     

基于水杨醛类席夫碱构筑的Fe(Ⅲ)、Co(Ⅲ)、混价Mn(Ⅱ)/Mn(Ⅲ)配合物的合成、晶体结构及磁性

以3-甲氧基水杨醛与乙醇胺缩合得到席夫碱化合物hmmpH_2(hmmpH_2=2-[(2-羟乙基亚氨基)甲基]-6-甲氧基苯酚),以hmmpH_2为配体合成了配合物[Fe_2(hmmp)_2(hmmpH)_2]·1.5CH_3CN·0.5H_2O(1)和[Co_2Na(hmmp)_2(N_3)_2(CH_3O)(CH_3OH)_2](2)。以3,5-二溴水杨醛与乙醇胺缩合得到化合物hmdbrpH_2(hmdbrpH_2=2-[(2-羟乙基亚氨基)甲基]-4,6-二溴苯酚),以hmdbrpH_2为配体合成了一个混价三核配合物[Mn(Ⅱ)Mn(Ⅲ)_2(hmdbrp)_2(O_2CPh)_4(CH_3OH)_2]·2CH_3CN·2CH_3OH(3)(HO_2CPh为苯甲酸)。对配合物分别进行了元素分析、X射线单晶衍射分析,还对1和3进行了磁性研究。单晶结构分析表明配合物1中2个六配位的Fe(Ⅲ)离子通过2个醇羟基氧原子相连形成二聚体结构,配合物2中Co(Ⅲ)也为六配位,通过2个甲醇中氧原子相连形成双核结构,配合物3为一混价三核锰结构,3个Mn离子呈线性排列。磁性测试表明配合物1中Fe(Ⅲ)离子之间存在反铁磁相互作用,配合物3的三核锰单元内Mn(Ⅱ)、Mn(Ⅲ)离子之间存在反铁磁相互作用。     

脱水对六核锰单分子磁体磁性的影响

以水杨醛肟和Mn(CH3COO)2.4H2O为原料,合成了一个新的六核锰簇合物[Mn6O2(CH3COO)2(salox)6(H2O)4].10H2O(salox2-表示负二价的水杨醛肟),对其进行了单晶X射线衍射分析及脱水前后样品的直流和交流磁性测试。结果表明,该簇合物是一个反铁磁性单分子磁体,脱水使得六核锰簇内的反铁磁作用增强,磁弛豫能垒下降,但簇合物仍保持单分子磁体的性质。     

混合价四核锰配合物[Mn4O2(CICH2COO)7(bipy)2]·H2O的合成、晶体结构及性质研究

在乙腈溶液中,由混合价三核锰配合物[Mn3O(ClCH2COO)6(py)2]·(H2O)(py为吡啶)与2,2'-联吡啶(bipy)反应合成了混合价(Mn3ⅢMnⅡ)四核锰配合物[Mn4O2(C1CH2COO)7(bipy)2]·H2O.采用元素分析、红外光谱、热分析和X射线单晶衍射法确定了其组成和结构.标题化合物晶体属于三斜晶系,空间群P-1,晶胞参数:a=0.89854(13)nm,b=1.4027(2)nm,c=1.9037(3)nm,α=93.518(3)°,β=96.736(3)°,γ=94.875(3)°,V=2.3680(6)nm3,Z=2,Dc=1.734 e/cm3,F(000)=1238,GOF=1.036,R1=0.0592,wR2=0.1162 [I＞2σ(I)].在标题化合物中,配位结构单元中心为一蝶型[Mn4(μ3-O)2]7+多核簇,含有2个Mn3(μ3-O)单元,具有近似C2对称轴.4个Mn离子均为六配位,外围配体为7个氯乙酸根和2个2,2'-联吡啶,处于变形的八面体环境.变温磁化率研究表明标题化合物在整体上表现为反铁磁性耦合作用,但在低温下的磁相互作用较为复杂.     

2-吡啶甲醇和1,1,1-三羟甲基乙烷混合配体七核锰配合物的合成、晶体结构与磁性（英文）

四水合氯化锰、2-吡啶甲醇和1,1,1-三羟甲基乙烷在乙腈里反应合成出一个七核Mn簇合物[Mn~Ⅱ_3Mn~Ⅲ_4(Cl)_6(hmp)_6(thme)_2]·H_2O·3CH_3CN(1·H_2O·3CH_3CN,hmpH为2-吡啶甲醇,thme H_3为三羟甲基乙烷),并对该化合物进行X射线衍射单晶结构分析、元素分析、红外光谱和磁性研究。1·H_2O·3CH_3CN属于单斜晶系I2/a空间群,配合物核骨架可看成由交替的MnⅡ和MnⅢ离子形成一个六边形,而这个六边形又围绕在1个MnⅢ离子的周围,这种结构类型的配合物以前并没有报道过。磁性研究表明,化合物1·H_2O中MnⅢ与MnⅡ或MnⅢ与MnⅢ离子之间总体是铁磁性耦合的,交流磁化率研究发现该化合物有弱的频率依赖现象。     

水杨醛苯甲酰腙锰配合物的研究

水杨醛苯甲酰腙C_(14)H_(12)O_2N_2(H_2L)常作为三齿配体和金属离子配位,有两种不同配位形式:HL~-(只失去酚羟基质子)和L~(2-)(进一步失去胺基原子)。本文用以合成了下列两种不同价态锰的配合物:Mn(Ⅱ)(HL)_2和Mn(Ⅲ)(HL)L以及Mn(Ⅱ)(HL)(CH_3COO)·1.5H_2O和Mn(Ⅲ)L(CH_3COO)·0.5H_2O,迄今文献中只见Mn(Ⅱ)L和Mn(Ⅲ)LX(X=CH_3COO~-、Cl~-、Br~-)型双核锰配合物的研究报道。     

三核锰配合物[Mn3O(O2CCHClCH3)6(py)2(H2O)]·2/3H2O的合成，晶体结构及磁性

用/N-n-Bu4MnO4,醋酸锰,2-氯丙酸在无水乙醇溶剂中合成了三核锰配合物[Mn3O(O2CCHlCH3)6(py)2(H2O)]·2/3H2O(1·2/3H2O).X-射线单晶衍射确定了其晶体结构.晶体属单斜晶系、C2/c空间群.3个Mn原子构成等腰三角形结构.变温磁化率研究表明配合物1存在反铁磁性交换作用.     

基于三核锰(Ⅲ)结构单元的二维配位聚合物的合成、结构和磁性研究

新合成了钠离子桥联三核锰结构单元的配位聚合物{[NaMnⅢ3O(sao)3(tfbdc)(H2O)4].0.5H2O.2CH3CH2OH}n(1)(H2tfbdc=2,3,5,6-四氟对苯二甲酸;H2sao=水杨醛肟),对其进行了元素分析、红外光谱、热重分析和单晶X-射线衍射结构分析。配合物属于三斜晶系,空间群P1。该配合物是一个由三核锰结构单元[Mn3O]构成的、钠离子和四氟对苯二甲酸桥联的二维配位聚合物。磁学性质研究表明,该配合物中锰离子之间存在着反铁磁性耦合作用。     

含混合多齿螯合配体双缺口立方烷型四核Mn配合物的合成、晶体结构与磁性研究

本文报道了一个含混合多齿螯合配体的四核Mn配合物Na2[MnIII2MnII2(pdmH)2(L)2(N3)2]·2CH3OH·2H2O(1·2CH3OH·2H2O,pdmH2为2,6-吡啶二甲醇,H2L为2,6-吡啶二甲醇与2,2-二吡啶酮水合物的脱水物),并对其进行单晶结构分析、红外、元素分析和磁性研究。单晶结构分析表明,该化合物属于三斜晶系P1空间群,分子中2个Mn2+、2个Mn3+及6个来自pdmH-或L2-配体的O原子构成1个双缺口立方烷结构。磁性研究表明Mn2+与Mn3+之间为弱的反铁磁性耦合作用(J1=-0.89 cm-1,J2=-1.13 cm-1),Mn3+离子之间为稍强的铁磁性耦合作用(J3=3.20 cm-1),基态自旋值S=2,交流磁化率研究表明,在所测试条件下,其虚部没有表现出单分子磁体所具有的频率依赖现象。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.